EcoFoil® Insulat ing A luminum Compos i te Foi l w i th Cross -Laminated Valéron® c ore

designed for high cost-effectiveness

insulates from radiant heat and cold

flexible enough to seal soft insulation

10 years guarantee, life >20 years*

Application ex.: ceiling insulation

EcoFoil® can be stapled on the upper side of ceiling panels. It will reflect 96% of heat coming through the roof. Cut the foil on site to the ceiling panel’s shape , staple it in place: the ceiling instantly becomes a heat shield, for up to 20 years (tested in UV accelerator).

Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com

Application ex.: insulation encapsulation

EcoFoil® is designed to encapsulate fiber insulation, to enhance the overall product properties. Inner layers can be heat sealed to themselves or to other materials. Can be incorporated into manufacturing processes.

EcoFoil® is manufactured in an ISO 9001 factory in the UK, by high pressure bonding a multilayer of highly reflective aluminum foil with tough-tear resistant core, especially designed to act as solar radiation, vapor and gas barrier in hot and humid climates.

EcoFoil® acts as an excellent vapor barrier to seal new or existing soft insulation. Ensuring insulation performance is not compromised by interstitial condensation, which would otherwise reduce insulation performance and could cause damage to the overall construction.

* the foil is guaranteed not to delaminate or lose performance during 10 years when applied properly.

Application ex.: modular buildings

EcoFoil® is an ideal insulation for prefabricated buildings, recycled containers and other modular buildings.

Easy to install on site under the roof and inside wall panels, even under the floor, it will conserve energy in both hot and cold climates.

Recommended application: roof insulation

EcoFoil® is a radiant barrier: it needs to be installed facing at least one air space, from 19mm to 25mm deep.

The foil blocks solar heat striking a roof from conducting through the tiles and insulation layers. Without Eco-Foil ®, heat crosses any air spaces as unwanted infrared energy, warming the inner skin of the structure and overheating the room.

Recommended application: wall insulation

Eco-Foil® is a two sided single foil for use as a heat reflective lining within the fabric of sustainable homes, most prefabricated domestic and commercial building components including portable and modular structures.

Eco-Foil® has an emissivity of only 0.05: 96% of radiant heat or cold is reflected back.

The membrane eliminates excessive heat gain caused by incoming solar radiation yet can keep the room warm during cold weather. No matter the season, room temperatures are far easier to control

The foil has been designed and tested to last for more than 20 years at 100% UV and 100% humidity exposure.

Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com

Insulat ing A luminum Compos i te Foi l w i th Cross -Laminated Valéron® c ore

Eco-Foil®

Eco-Foil®

EcoFoil®

Emissivity 0.05

Reflectivity 96%

Roll Size 96m x 1.25m 120m²

Nominal Thickness 91 microns ±10%

Moisture/vapour Transmission Rate (ASTM E96,

Procedure B, MVTR) <2g/ m²/24hrs

UV resistant Tested for the equivalent of 20 years at 100% humidity and 100% UV

Optical density 2.2 ± 0.2

Oxygen permeability <2cc / m2 / 24hrs

Sales contact:

Trading Green Ltd.

Phone: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881

Email: info@tradinggreenltd.com

Eco-Foil is ideal for insulating modular and pre-fabricated buildings.