I-Prompter For i-Pad

User Guide

1

Contents

Assembly for 'Traditional' prompting 3

Assembly for 'Direct View' prompting 8

Glass Care 11

Exposure 11

Box Contents 11

2

Assembly for 'Traditional' Prompting

Attach the ‘Teleprompter Base’ to the quick release plate of your camera tripod using theallen key, nut,bolt and washers provided. If your tripod does not have a removable quickrelease plate or the camera fitting nut is not removable then we recommend you buy asuitable add on plate from a manufacturer such as Manfrotto.

3

Slide the ‘Glass Frame’ onto the top of the ‘Teleprompter Base’ and secure with the wingnuts provided.

Attach the cloth hood onto the ‘Mirror Frame’ using the Velcro strips.

4

Slide the 60/40 glass into the ‘Glass Frame’ with the green sticker facing the presenter

Attach your camera to the ‘Teleprompter Base’ using the screw provided, Place yourcamera on the ‘Camera Riser’ if the camera is too low. When using the riser block (s) youwill need to use the longer screw in conjunction with a washer (provided).

5

Place your i-pad into the rubber sleeve and then the holding tray and lock it in by securingthe cross bar with the screws and allen keys provided.

6

Attach the ‘I-Pad Tray’ to the ’Teleprompter Base’ using one of the mounting screwsprovided.

Move the Teleprompter back and fourth to find the optimal balance point.

Note: When in use as a ‘Traditional’ prompter the rear monitor mounting plate can beremoved using the allen keys provided or used to mount additional accessories such avideo recorders or monitors.

7

Assembly for 'Direct View' prompting

Place your i-pad into the rubber sleeve and then the holding tray and lock it in by securingthe cross bar with the screws and allen keys provided.

8

Attach the ‘Teleprompter Base’ to the quick release plate of your camera tripod using theallen key, nut,bolt and washers provided. If your tripod does not have a removable quickrelease plate or the camera fixing nit is not removable then we recommend you buy asuitable add on plate from a manufacturer such as Manfrotto.

9

Attach the ‘I-Pad Tray’ to the ’Teleprompter Base’ using one of the mounting screwsprovided.

Move the Teleprompter back and fourth to find the optimal balance point.

10

Glass Care

To ensure optimal image quality the I-Prompter utilises an ultra thin beam-splitter glass,Please handle the glass with extreme care.To clean the glass use a lint free cloth and if necessary use an acid and vinegar free glasscleaning solution.

Exposure

The I-Prompter for i-pad changes the exposure by approximately 1 stop, similar to theaffect of a neutral density filter.

Box Contents

11