Comprehensive Infant Care CentreFeatures and Benefits

Part Identification

Heater Unit

IV Stand

Mayo tray

Mayo tray

Alarm Indicator

Control Panel

CPAP Control Panel

Bed

Bed Tilting

Castor

Height Adjustment

Pedestal

Modules

CIC101 has 4 modules• Warmer• CPAP (Optional)• Pulse Oximeter (Optional),• Weighing Scale

Warmer

• Single element 600w quartz infrared heating element placed in a parabolic reflector

• Intensity of the radiation can be adjusted - can be set manually at a desired level or - controlled automatically in the servo mode.

Observation lights

• Care givers disinfect their hands before any procedure on the baby. They have to switch on the observation lamps which is again a physical contact with the switch - which means to disinfect their palms again.

CIC 101 provides an unique solution here…….

Obervation Lamp

Observation lights

• The two examination lamps 'soft-start' to minimize disturbing the baby.• The lamps are switched on and off by passing a hand over the switch.• To dim the lamps, hold a hand over of the switch, the lamps will begin to

dim automatically, remove the hand when the required brightness is obtained.

Vital parameters are all displayed in an LCD Graphic and are clearly readable Pulse oximetry and heart rate trends are displayed easily.

All signals such asTemperature, Heart rate, Weight, SpO2 are stored for 24 hours.

Display and storage module

Weighing Scale

• The weight of the infant can be monitored without disturbing the infant

• The weight of the baby can be measured automatically at different times of the day and stored. Weight trend charts can be displayed readily.

Continuous Positive Airway Pressure ( CPAP )

1. Sophisticated electronic oxygen-air blender. The oxygen concentration and oxygen-air flow rate are variable.

2. Auto Calibration

3. Gas Supply check

Used to induce spontaneous breathing in infants by applying a constant excess pressure through tubes connected to the nostrils.

Thereby immature lungs are opened by excess pressure and exchange of gases is facilitated

Baby bed

• Oval shaped bed for greater access to baby• The advantages of this are readily appreciated when comparing

with the sharp and inconvenient edges of other designs.

Tilt & rotate options baby bed

• The bed may be turned about on the horizontal plane and locked at three position.

• The bed may be tilted +/- 12 degree Trendelberg- and Fowler-like after surgery and after every feed.

±12°

Height adjustment

• The height of the bed may be by operating a foot switch provided on the base. The bed and the warmer change height together so that the distance between them is maintained constant

• Foot switch given on both sides

Suction

• The suction bottle collects fluid removed by suction from the infant's respiratory passage.

• The bottle is autoclavable.

Infection control

Most equipment available today have too many parts

Which means

Too many joints / gaps / crevices

Which means

A perfect breeding ground for micro organisms leading to infection

INFECTION IS TODAY THE MAJOR CAUSE FOR INFANT MORTALITY

Mayo traysThe tray may be swiveled and their height may be adjusted for convenience.

IV PolesThe IV Pole may be swiveled for convenience, and their height may be adjusted.

These may be swivelled for convenience, and their height may be adjusted.Capacity to hold upto eight infusion pumps.

X-RAY Compartment X-ray tray may be slid into and out of the X-ray compartment without any need to handle the baby.

Ease of installation

Part Name:

1. Base Assembly

2. Pillar Assembly

3. Neck & Heater Box Assembly

CIC 101- Best Product of the year 2011 MEDICAL Electronics Category

Certificate on the CIC 101