Embed Size (px)
Citation preview
CHINA THERMOPLASTIC INJECTION MOLDING
About Us
Shanghai iMolding Co.,Ltd. locates in Shanghai, Pudong New area. Based on over thirty years indomitable efforts, experienced technology team and first class manufacturing equipments the company has adopted a service mode for Plastic Injection Moulding. Product development mould-design and making, plastic-injection moulding, die casting moulding and finished product assembly in a coordinated process with the moulds-making plastic product- processing as the mainstay.
Thermoplastic Injection Molding
Thermoplastic injection molding is a manufacturing process that creates fully functional parts by injecting plastic resin into a pre-made mold. Thermoplastic injection molding has several sub categories, such as rapid injection molding, which is best utilized in fine tuning prototypes prior to a product being given the go-ahead for production. Another sub category, production injection molding, is best utilized for full product runs.What's more is that it's the industry standard for producing plastic parts, so developers can be certain they're putting out a quality product if they go this route in the development process.
We already noted that thermoplastic injection molding consists of injecting a thermoplastic resin into an already crafted mold to create parts in the shape of the mold. But here's a closer look at how the process works:
l A mold is made based off a CAD file. That's the laborious part of the process as it takes time to create the mold. Such molds are typically made from aluminum or steel.
l After the mold is created, the thermoplastic resin is injected into it and then left to cure and form the part. The material is first fed into a heated barrel before being launched into the mold to cold and cure.
How it works:-
l Following curing, the part is removed from the mold and the process starts over until the part run is completed.
Advantages of Thermoplastic Injection Molding
l Fast production.l Low labour costs.l Design flexibility.l High-output production.l Multiple materials can be used at the same time.l Can be used to produce very small parts.l Leaves little post-production scrap.l Ability to include inserts.
Thank You !
CONTACT US :iMold USA LLC
ADD: 2220 Hillcrest Street Orlando, FL 32803Tel.: +1-407-9822797
Email: [email protected]
