16
RIVETED JOINTS A presentation by : AKASH SOOD For : MALWA INSTITUTE OF TECHNOLOGY AND MANAGEMENT

Akash rivet joint

Embed Size (px)

DESCRIPTION

 

Citation preview

Page 1: Akash rivet joint

RIVETED JOINTS

A presentation by : AKASH SOOD

For : MALWA INSTITUTE OF TECHNOLOGY AND

MANAGEMENT

Page 2: Akash rivet joint

WHAT IS RIVET?

A rivet is a round rod of circular cross-section. It consists of two parts HEAD and SHANK.

Metals commonly used for rivets are Mild steel, wrought iron, copper and aluminium alloys etc.

HEAD

SHANK

A presentation by : AKASH SOOD

TAIL

Page 3: Akash rivet joint

WHAT IS RIVETING

Riveting is the process of forming a riveted joint. For this, a rivet is first placed in the hole drilled through the two parts to be joined. Then the shank end is made into a rivet head by applying pressure

A presentation by : AKASH SOOD

Page 4: Akash rivet joint

PROCESS OF RIVETING

A presentation by : AKASH SOOD

Page 5: Akash rivet joint

USE OF RIVETS

Riveted joints are permanent fastenings and riveting is one of the commonly used method of producing rigid and permanent joints. Manufacture of boilers, storage tanks etc.

These joints are also used to fasten rolled steel sections in structural works, such as bridge and roof trusses.

A presentation by : AKASH SOOD

Page 6: Akash rivet joint

EXAMPLES SHOWING RIVET JOINTS B/W TWO METALS

A presentation by : AKASH SOOD

Page 7: Akash rivet joint

DIMENSIONS OF RIVETS.

A presentation by : AKASH SOOD

Page 8: Akash rivet joint

TYPES OF RIVET

A presentation by : AKASH SOOD

Page 9: Akash rivet joint

TYPES OF RIVETED JOINTS

There are two types of riveted joints.

1. RIVETED LAP JOINT

2. RIVETED BUTT JOINT

A presentation by : AKASH SOOD

Page 10: Akash rivet joint

EXAMPLE OF RIVETED LAP JOINT

A presentation by : AKASH SOOD

Page 11: Akash rivet joint

EXAMPLE OF RIVETED BUTT JOINT

A presentation by : AKASH SOOD

Page 12: Akash rivet joint

CASES OF FAILURE OF RIVETS

Under Tensile Stress or Tearing resistance of plate per pitch.

P(t) = (p-d) x t x σ(t)

Where,o P = Tearing resistance of plate per

pitch.o p = Pitcho t = Thickness of plate.o σ(t) = Permissible tearing strength.

A presentation by : AKASH SOOD

Page 13: Akash rivet joint

CASES OF FAILURE OF RIVETS

Under Shearing resistance of plate per pitch.P(s) = n{ } x (/4)d2 x ζ(s)

Where, P(s) = Shearing resistance of plate

per pitch. d = diameter of rivet hole ζ(s) = Permissible shearing strength.

1or

2 …or

1.875

A presentation by : AKASH SOOD

Page 14: Akash rivet joint

CASES OF FAILURE OF RIVETS

Under Crushing resistance of plate per pitch.

P(c) = (nd) x t x σ(c)

Where, P = Tearing resistance of plate per

pitch. n = Number of rows of rivet. t = Thickness of plate. σ(c) = Permissible crushing strength.

A presentation by : AKASH SOOD

Page 15: Akash rivet joint

EFFICIENCY OF RIVETED JOINT

η =

Where, Strength of un-riveted plate =

σ(t)pt

Least value of P(t), P(s), P(c)

Strength of un-riveted plate

A presentation by : AKASH SOOD

Page 16: Akash rivet joint

THANKS FOR WATCHINGFor further quarries contact :

AKASH SOODBranch : Mechanical EngineeringIInd year (MITM, GWALIOR)

or on FACEBOOKwww.facebook/akku.soodor MAIL ME @

[email protected]