Upload
kunal-bankapur
View
329
Download
6
Embed Size (px)
Citation preview
ROLLBLOC HYDRAULICS
Positioning of Clamps in T-Slot
The flexible ROLLBLOC HollowPiston Clamps and ROLLBLOC SlidingClamps can be used in a wide rangeof applications. The associated park stations (diechange) are set up on hydraulic distributor plates. They can beoptionally equipped with a non-return valve.
Stationary Mounted Die Clamps
When using die subplates, ROLL-BLOC Clamping Bar and ROLLBLOCWedge Clamps offer an additionalrationalization potential as theclamping system can be fully auto-mated.
320
80
Pumpe ein gespannt gespannt gespannt
Kreis 2lösen
spannen
Kreis 1lösen
spannenStörung
Kreis 3lösen
spannen
Hydraulic clamping systemHand pump for hydraulicROLLBLOC Die Lifters.Operating pressure 40/80 bar.Accessory kits for the die lifterhydraulic network.
ROLLBLOC-Hydraulic unitOperating pressure 400 barfor clamps and 40 or 80 barfor supplying ROLLBLOC DieLifters.
Valve setsSingle-circuit or dual-circuit forROLLBLOC clamps. They can besecured on a mounting plate forthe clamps in the press ram.
ROLLBLOC Hollow Piston Clamp
ROLLBLOC Sliding Clamp
ROLLBLOC Clamping Bar
ROLLBLOC Wedge Clamp
FAST, SAFE AND RELIABLEDIE CHANGING
& CLAMPING
New Design
Güthle Maschinenbau GmbH & Co. Gottlieb-Haefele-Strasse 973061 EbersbachGERMANYPhone: 0049 7163 99090Fax: 0049 7163 990990E-mail: [email protected]
For further information pleaserequest our detailed ROLLBLOCProduct and OrderingCatalogue.
With our DILOS Range whichincludes products such as the DILOS Swing Sink Clamp, DILOS Shuttle and DILOS Truck,we offer versatile options forautomated die change opera-tions. Please request our DILOS information material.
Your component and systemssupplier for rational die change
Subject to modifications � PP41 E � Werbeagentur Straub �
ROLLBLOC-HYDRAULIC QUICK-ACTION CLAMPS FOR PRESS BED AND RAM
Overview of all ROLLBLOC Die Loading Arms
CT06CT10
CT02
CT04
CT06CT10
CT02
CS04CA04CD04CT04CS06CA06CD06CT06CT10
CK00CS01CA01CD01CK01CS02CA02CD02CK02CT02CK03CS04CA04CD04CT04CS06CA06CD06
CK00CS01CA01CD01CK01CS02CA02CD02CK02
CK03CS04CA04CD04
CS06CA06CD06
CK00CS01CA01CD01CK01CS02CA02CD02CK02
CK03
Load bearingcapacity
5 kN10 kN
20 kN
30 kN40 kN
60 kN
100 kN
Die loading arms type
Die loading arms working radius500 mm 800 mm 1000 mm 1250 mm 1600 mm 2000 mm
ROLLBLOC DIE CHANGINGTECHNOLOGY
ROLLBLOC Die Lifters for DIN 650 T-Slots
These die loading arms make for asafe and reliable transfer station fordies that are transported with theaid of a crane or stacker truck. Theneedle bearing-mounted load carry-ing rollers of the ROLLBLOC DieLoading Arms ensure smooth, linearmovement of the die from andonto the press bed.
There is a choice of different typesof swivel action and swivel direc-tion depending on the workingradius, overall width between thedie loading arms and the press configuration.
E
Fixed mounted ROLLBLOC Swivel Die Loading Arms
ROLLBLOC Die Loading Arms andROLLBLOC Die Loading Arms withprop supports can be attached inthe fixed mounting hooks onlywhen required. These die loadingarms can therefore also be used onseveral presses.
Portable ROLLBLOC Die Loading Arms with mounting hooks
Spring force versionThe load carrying elements, i.e. ballor roller, are individually supportedby springs. The load carrying ele-ments are 'lowered' by the clamp-ing action of the die.
CS 01/02
CD 01/02
CA 01/02
CK 02/03
CT 06/10
Hydraulic versionROLLBLOC Ball-Type Die Lifters generate the load bearing and lifting function at 40 bar and theROLLBLOC Roller-Type Die Lifters at 80 bar operating pressure. The hydraulic system of the presscan be used for this purpose – or a ROLLBLOC Hydraulic Unit or the ROLLBLOC Pump for manual operation.
Dies can be moved effortlessly andpositioned precisely on the ball- or roller-mounted load carrying elements by one person.
Load bearing capacity per load carrying element (kN)
18
22
28
36
T-slotDIN 650
Ball-type die liftersSpring Hydraulic
Roller-type die liftersSpring Hydraulic
0.25
0.4
0.64
1.0
0.5
0.8
1.25
2.0
0.5
0.8
1.25
2.0
1.0
1.6
2.5
4.0
453
860
1410
1538
690
220
1400
105
750
ROLLBLOC BUGGY 20
Rational die change and transportoperations with the electrically driven die change lift-truck that hasbeen specially developed for pressand punch dies.
A safe and reliable clutch systemensures fast and effortless die trans-fer between the press bed and theload carrying forks of the BUGGY.The transport safeguard is lockedand released automatically by thisclutch system.
ROLLBLOC Interchangeable Subplate Technology
The use of interchangeable plates is ideal for different sized dies.The dies are prepared and set upoutside the press thus allowing production to continue. ROLLBLOC Interchangeable Sub-plate Technology opens up newoptions of profitably producingeven small batch sizes as well asexpress orders for customers in a hurry.
TRIED AND TESTED PRECISION FOR MAXIMUM LOADS AND FUNCTIONAL RELIABILITY
ROLLBLOC Die Loading Arms with a load bearing capacity from 5 to 100 kN