CENTRIFUGAL OIL CLEANER FOR Furnace Oil Cleaning

Oilmax

1

2

Rotor Cleaning Tray

Y-StrainerIntegral Motor Pump

Pressure gauge

Hour Meter

Motor On Indicator

Pressure Regulation Valve

3

OCS 600X2 Installation at Bharat Forge, Pune

4

6 Kg. Sludge Collected in Centrifuge Rotor in 24 Hrs. Running

Why Furnace Oil Cleaning Is Required

Furnace Oil Contains Sludge & Impurities Which Causes Following Problem -

1. Impurities Cause Deposition in nozzles & Burners

2. Frequent Cleaning of Burners is required.

3. With Chocked Burners The Spray pattern Gets Distorted

4. This Results into inefficiency in Heat-Generation

5. Furnace Oil-Consumption increases

6. Burning of impurities causes Excess smoke.

7. This Results into Environmental and pollution issues.5

Centrifuge Working Principle

Centrifugal Oil Cleaner Operates on the Reaction Turbine Principle.

Oil Enters the centrifuge Under Pressure and flows to the rotor thru hollow shaft.

The Oil Pressure and flow is converted in rotational energy as the oil escapes through the jets, producing speed upto 6000 RPM.

The Resultant Centrifugal Force Removes dirt from the Oil depositing it on the Inner wall of rotor in a dense cake form.

Clean Oil Drains Back By Gravity to the oil Tank

6

Schematic Diagram Centrifugal Oil Cleaning System

For Furnace oil Cleaning

7

Centrifuge

By-Pass Valve

Pressure Gauge

Furnace oil Supply to Burner

Hour Meter

MOTOR

Furnace Oil Tank

Centrifuge is a multi-pass filtration system, it can Remove all the particles upto 1 micron from furnace Oil, in approx. 5-10passes.

For Furnace-Oil Tank Capacity 4000-6000 Ltr. Centrifuge Model OCS 600 is Recommended Which has flow rate of 4000 Ltr./hr. – This Means there will be approx one pass per Hr. and in 10 Hrs. there will be 10 passes, which is sufficient for efficient cleaning.

8

Oilmax Centrifuge Credentials

Tried, Tested and Proven with Installation base of over 50,000 units in

various applications including – DG Sets, Marine Engines, Construction /

Earthmoving Equipments, Trucks and Buses , Industrial Process , Furnace

Oil etc.,

100 % OE Fitment on BEML Komatsu Greeves MWM, Tatra and Kirloskar

& Tatra Engines

Manufactured since 20 years, With Complete in-house facilities within group

Companies including Die-Cast Foundry, CNC Turning Center and Vertical

machining center, 140 ton Hydraulic press, etc.,

Exported all over the world- including USA, UK, Canada, Japan, Netherland,

China, Malaysia, Philippines, Indonesia etc.,

Scope of Supply includes complete installation kit with Flanges, Gaskets,

Fasteners, Hoses, Pressure Gauge, Hour Meter, Control Panel with Auto-shut

off facility, (To automatically shut-off the unit after required no. of hours.)

9