MB SD Connect Compact 4 MB Star C4 SD Connect multiplexer EPC net Cannot Display Solution

MB SD Connect Compact 4 support K-Line & CAN-BUS & UDS Protocols. MB Star C4 SD Connect multiplexer with 2016.7 mercedes star diagnostic software new release now. Below OBD2Tuning.com sharing MB SD Connect Compact 4 MB Star C4 SD Connect multiplexer EPC net Cannot Display Solution. 

Mercedes MUX C4 Mercedes star diagnosis Compact 4 with xentry 2016.7 win7 software

MB Star C4 SD Connect multiplexer EPC net Cannot Display Problem:

After actived the V2016.07 EPC WIS software ,but the obd2tuning.com star diagnosis EPC net cannot run on IE explorer.said"Internet Explorer cannot display the webpage".

OBD2Tuning.com MB SD Connect Compact 4 MB Star C4 SD Connect multiplexer EPC net Cannot Display Solution: 

Step 1.Go to Windowns Star Menu>open EWA Admin Tool

Step 2.

Open Server EPC WIS one by one to check which software is not run Enable these 3 optionsThen restar the computer

Step 3.

Run EPC.net software again

If you had EWA Client Tools erro"Application blocked by security settings" after activation,then do following settings.

Go to Control Panel>find JAVA control panel> select Security tab>manually set the secutiry lecel to lowest level.

Then EPC should run without problemHope it can help you .

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.