Item No:

Link:

SP04

http://www.eobd2.fr/multi-dig-access-j2534-pass-thru-obd2-device-460.html

I-2014 ACTIA Multi-Diag Access J2534 VCI Free Download and Installation

Clone ACTIA Multi-Diag Access J2534 Pass Thru VCI has updated to I-2014 that supports 23

brands updated and 5300 new systems. Here is the free 2014.01V VCI software download and

installation guide.

Software version: V2014.01

Operating system: Win XP and Win 7 64 bit

Language:  French, English, Spanish, German, Italian, Portuguese, Bulgarian, Croatian, Czech,

Danish, Dutch, Finnish, Hebrew, Hungarian, Polish, Romanian, Russian, Serbian, Slovenian,

Swedish, Turkish

ACTIA Multi-Diag VCI 2014.01 Installation instruction:

Free download 2014.02V ACTIA Multi-Diag Access J2534 VCI software

http://www.mediafire.com/download/cym6luorva8fh07/j2534-2014.1.zip

Before install the VCI software, open ISNT word file to read the installation instruction

Disable local area connection and wireless work connection, otherwise the software maybe

damaged.

Open (1) Key folder 04XXXX on the CD and run KeyUpdate. Then confirm and wait for the

message successfully installed XXXXXX and OK

Open (2) DVD 1-2014 folder, open and install setup exe.

Accept license agreement

The VCI software will detect and fill J2534 SN automatically.

Send your supplier 31-xxxxxxxxxx code to obtain the activation code and then it to the Code

blank

2014.01V Multi-Diag J2534 OBD2 device upgrade is processing which will generate Multi-Diag

shortcut on the desktop

Select “No, I will restart my computer later” after the update is completed. Press Finish

Browse and locate C: \ ACTIA \ portal and then delete file wegt.exe. Delete the file on Recycle

Bin as well.

Again open (1) Key folder 04XXXX on the CD and run KeyUpdate. Then confirm and wait for

the message successfully installed XXXXXX and OK

Install (3) xs-ime-pt-207p-workshop.exe on the CD

Connect the J2534 pass-thru with vehicle via OBD port, and then connect the Multidiag j2534

interface with computer using USB cable.

The system will prompt to install driver

Follow the system prompts to install I+ME XS PassThru setup

Wait the well communication built

Comfigure settings. Right click My Computer>>Properties>>Hardware>>Device

Manager>>I+ME ACTIA XS Device>> PassThru+XS USB Driver

Open Multi-Diag software on the desktop

Click Multi-Diag icon to welcome the vehicle selection menu

Select specific vehicle make and model.

Select Engine and click all sysem, the windows will prompt “Your Multi-Diag subscription will

end within 0 days”, click the tick mark to continue

Communication interface update is processing

Follow system prompts, save file to F:/SYSTEM.OLS/ACTIA/Driver VCI/PT1G

Multi-Diag VCI start initializing, then you can perform diagnostic function.