Fuel level sensor for telematics integration

Fuel level sensor

Models

Installation

Documents

Features and characteristics

Purpose of use and application

Minsk, Belaruswww.jv-technoton.com

FUEL MONITORING EXPERT

http://www.jv-technoton.comhttp://www.jv-technoton.com

Fuel level sensor

Purpose of use and application

DUT-E fuel level sensors designed to measure level of liquid fuel and other nonconductive liquids in vehicle and stationary tanks.

DUT-E are used in GPS vehicle monitoring and fuel consumption control systems as additional fuel sensor or as a replacement of standard (factory built-in) fuel level sensors.


http://www.jv-technoton.com

Fuel level sensor

Monitoring of fuel tank fuelling and draining

Detecting fuel thefts

Fuel consumption monitoring

FUEL MONITORING EXPERTPurpose of use and application


Models

Fuel level sensor


XType of output signal::

F analog, voltage 1.5-9.0 V; frequency, 500-1500 Hz 5 analog, voltage 1.5-4.5 V10 analog, voltage 2.5-9.0 V232 digital, interface RS-232485 digital, interface RS-485CAN digital, interface CAN 2.0B

Y LSymbols for special sensor modifications:

Base - fuel level sensor measuring head

Nominal length of the measuring part (mm):

A5, A10: 350; 500; 700

AF, 232, 485, CAN: 700; 1000


Fuel level sensor

Features and characteristics/unit structure

Fuel level sensor head with printed circuit board inside

Interface cable with connector plug

Measuring probe

Spring catch,screen filter



Fuel level sensor

Features and characteristics/spring catch

increases durability of fastening; protects the sensor and the tank from

damage caused by swinging fuel.



Fuel level sensor

Features and characteristics/screen filter

easy and quick installation; protection against water and mud; protection against fuel foam (during the tank calibration).



Fuel level sensor

Features and characteristics/example of data

The sensor measures fuel level in the tank and generates an output signal to forward it to a vehicle tracking device.

Tracking device records and processes the sensor data for further transmission to the telematics server. Server software processes and analyzes the received data to generate analytical reports for a selected period of time.



Fuel level sensor

Installation/determine installation location

Geometrical center of the fuel tank is recommended.

This will reduce measurement errors caused by fuel level deviation during driving.



Fuel level sensor

Installation/probe cutting

Before installing DUT-E fuel level sensor it is necessary to cut a probe.

It is required to leave a 25 mm gap between the edge of the measuring probe and the tank bottom.

DUT-E AF/232/485/CAN allow cut off up to any required probe length with mandatory further calibration.

DUT-E A5/A10/I allow cut off up to 30 % of the initial length of the measuring probe with no further calibration.



Fuel level sensor

Installation/length extension

Length extension is performed by fastening KDC additional sections to the measuring probe of DUT-E sensor.

Model range of DUT-E additional sections includes: KDC 250, KDC 500 and KDC 1000 with lengths of 250, 500 and 1000 mm respectively.

DUT-E AF/232/485/CAN can be extended up to 6000 mm length.

DUT-E additional sections can be cut to necessary size.



Fuel level sensor

Installation/ergonomic bayonet-type fastening

easy installation; easy maintenance.



Fuel level sensor

Installation/electrical connection

DUT-E A5, DUT-E A10

DUT-E AF

DUT-E 232, DUT-E 485

DUT-E CAN

1 output signal;2 ground;3 power supply.

1 power supply;2 ground;3 K-line;4 output signal.

1 power supply;2 ground;3 received data ;4 transmitted data .

1 power supply;2 ground;3 CAN High;4 CAN Low;5 K-line.



Fuel level sensor

Installation/monitoring of two and more tanks

DUT-E SUM AF (DUT-E SUM 232) summator is used together with DUT-E AF (DUT-E 232) sensors on vehicles with two and more fuel tanks for measuring total amount of fuel.

DUT-E SUM summator: low cost; easy to install; needs no configuration.



Fuel level sensor

Documents/approval of automotive manufacturers

DUT-E fuel level sensor installation

approved by automotive manufacturers:

AMAZ (buses);

MAZ (trucks);

MAZ-MAN (trucks);

MZKT (oversize load trucks).



Fuel level sensor

Documents/certificates

Certificate of Conformity to the electromagnetic compatibility requirements

Certificate of electromagnetic compatibility (EMC)

Pattern approval certificate of measuring instruments

Certificate of safety of wheeled vehicles

Explosion-proof certificate (Russia)

ISO 9001-2009 Certificate of Quality Management System



Fuel level sensor

Documents/compatibility with tracking devices

CKPT 31/CKPT 25/CKPT 45Auto GRAPH GSM+/Auto GRAPH GSM (GLONASS)

MapOn GBOX6

NaviFleet ET100

Naviset GT-10

SKAUT MT-530/SKAUT MT-600 GP PRO

BCE Fm Blue/BCE Fm Light

VOYAGER 2

GALILEOSKY GPS/GALILEOSKY GLONASS

BK11-02

Locarus 702X/Locarus 702R/Locarus 702S

Ruptela FM-Pro3

Relevant information at www.jv-technoton.com


http://www.jv-technoton.comhttp://www.jv-technoton.com/compatibility_with_tracking_devices

Fuel level sensorPurpose of use and application/1 Purpose of use and application/2ModelsFeatures and characteristics/unit structure Features and characteristics/spring catchFeatures and characteristics/screen filterFeatures and characteristics/example of dataInstallation/determine installation locationInstallation/probe cuttingInstallation/length extensionInstallation/ergonomic bayonet-type fasteningInstallation/electrical connectionInstallation/monitoring of two and more tanksDocuments/approval of automotive manufacturersDocuments/certificatesDocuments/compatibility with tracking devices

Automotive

Fuel level sensor for telematics integration