1
EVannex® — Tesla Aftermarket Accessories 3413 SW 14 th Street •• Deerfield Beach, FL 33442 •• evannex.com Disclaimer: Evannex is not responsible for any vehicle damage caused during the installation or use of this product. Any costs associated with any vehicle damage are the sole responsibility of the purchaser. Seat Hoodie TM for Model S and X Installation Instructions Thanks for purchasing Seat Hoodie TM . Please read these installation instructions BEFORE you install the Seat Hoodie. Seat Hoodie TM has been designed as temporary protection for one or both front seats in your Model S or Model X. We’ve created an Installation Video that can be viewed at evannex.com. We strongly recommend that you view it BEFORE you install Seat Hoodie. Seat Hoodie TM comes as one complete part, no tools necessary. There are five elements to note on the Seat Hoodie: (1) the “hoodie” is custom4designed to slip over the integrated head rest and upper seat back of the front seats; (2) an embroidered front apron that spans the seat back and the seat cushion with an elasticized “skirt” that fits over the seat cushion front edge to anchor the apron and reduce any back sliding; (3) a rear “cape” that contains something that many Model S and X owners need—a back4of4the4seat storage pocket, (4) two hook and loop straps that fasten the front apron to the rear cape to provide a secure fit, (5) and a bottom connecting strap for a tight fit, a lower buckle strap to ensure a tight fit across the bottom of the seat. Quick Start Installation Steps: Step 1 . Remove Seat Hoodie from its plastic bag Step 2. Slide the hoodie over the integrated headrest being sure that the embroidered logo faces the front of the vehicle. Step 3. Pull down the embroidered front apron and fit the elasticized “skirt” over the seat surface and sides. NOTE: For quick and temporary use, Steps 1 9 3 are all that is required. Step 4. Moving into the rear seat area, pull down the rear cape and fasten the two Velcro straps to the appropriate fastening area on the bottom of the rear cape. Step 5. Fasten the lower buckle strap to tighten the front elasticized skirt. Seat Hoodie is now installed.

EVANNEX - Seat Hoodie Installation Instructions for Tesla Model S and X

Embed Size (px)

Citation preview

Page 1: EVANNEX - Seat Hoodie Installation Instructions for Tesla Model S and X

EVannex®(—((Tesla&Aftermarket&Accessories&3413(SW(14th(Street(••(Deerfield(Beach,(FL(33442(••(evannex.com(

Disclaimer:(Evannex(is(not(responsible(for(any(vehicle(damage(caused(during(the(installation(or(use(of(this(product.(Any(costs(associated(with(any(vehicle(damage(are(the(sole(responsibility(of(the(purchaser.(

(

Seat(HoodieTM(for(Model(S(and(X(Installation(Instructions(

Thanks&for&purchasing&Seat&HoodieTM.&Please&read&these&installation&instructions&BEFORE&you&install&the&Seat&Hoodie.&!Seat!HoodieTM!has!been!designed!as!temporary!protection!for!one!or!both!front!seats!in!your!Model!S!or!Model!X.!We’ve!created!an!Installation(Video!that!can!be!viewed!at!evannex.com.!We!strongly!recommend!that!you!view!it!BEFORE!you!install!Seat!Hoodie.!!Seat!HoodieTM!comes!as!one!complete!part,!no!tools!necessary.!!There!are!five!elements!to!note!on!the!Seat!Hoodie:!(1)!the!“hoodie”!is!custom4designed!to!slip!over!the!integrated!head!rest!and!upper!seat!back!of!the!front!seats;!(2)!an!embroidered(front(apron!that!spans!the!seat!back!and!the!seat!cushion!with!an(elasticized(“skirt”!that!fits!over!the!seat!cushion!front!edge!to!anchor!the!apron!and!reduce!any!back!sliding;!(3)!a(rear(“cape”!that!contains!something!that!many!Model!S!and!X!owners!need—a!back4of4the4seat!storage!pocket,!(4)!two(hook(and(loop(straps(that(fasten(the(front(apron(to(the(rear(cape!to!provide!a!secure!fit,!(5)!and!a(bottom(connecting(strap!for!a!tight!fit,!a!lower!buckle!strap!to!ensure!a!tight!fit!across!the!bottom!of!the!seat.&!Quick&Start&Installation&Steps:&(

Step(1!.!Remove!Seat!Hoodie!from!its!plastic!bag((Step(2.!!Slide(the(hoodie(over(the(integrated(headrest!being!sure!that!the!embroidered!logo!faces!the!front!of!the!vehicle.!

(

Step(3.!!Pull(down(the(embroidered(front(apron(and(fit(the(elasticized(“skirt”(over(the(seat(surface(and(sides.((

NOTE:&&For)quick)and)temporary)use,)Steps)1)9)3)are)all)that)is)required.)

(

(

Step(4.((Moving!into!the!rear!seat!area,(pull(down(the(rear(cape(and(fasten(the(two(Velcro(straps(to(the(appropriate(fastening(area(on(the(bottom(of(the(rear(cape.(

(

Step(5.(Fasten(the(lower(buckle(strap(to(tighten(the(front(elasticized(skirt.((Seat)Hoodie)is)now)installed.(