Photography lo2!!

  • View

  • Download

Embed Size (px)

Text of Photography lo2!!

  • 1. Aperture (AV mode) Aperture Aperture is the name for the hole in a lens which controls the depth of field in a photograph. The main purpose of using aperture-priority mode is to control the depth of field. Depth of field refers to the range of distance that appears acceptably sharp.Thesmaller the F Number, The larger the hole in the lens. As more light is let in the camera due to the large hole, it means that the depth of field does not occur as well as a larger F Number.As you can see, the higher the F number, the smaller the hole in the lens or aperture. Thus meaning a much greater depth of field as less light is let in the camera.

2. Here the photograph has been taken using a Smaller F Number of F/4.5. This has a wide aperture due to one image being the central focus. The image was taken close to the camera to enhance the effect of what large aperture can create. Here the F Number on this photograph was F/11. This starts to become more clear as depth of field is starting to be seen across the image. Here the full image starts to become clear however the background is still not in focus. Here the Photograph was taken at F/29. This is clear as the small aperture creates a much larger depth of field due to full image being clear and you can see objects such as the Rubbish Bin without Noise. It is clear throughout the image. 3. Shutter Speed TV (Time value) Mode Shutter Speed Shutter speed or exposure time as it is also known, is the length of time a camera's shutter is open when taking a photograph. Shutter speed is recorded in seconds and the bigger the denominator, the faster the speed. When taking moving objects, 1/60th of a second or higher will be used to avoid camera shake, this occurs when the shutter is open and results in blur on the images, such as seen on the images on the next page. As you can see on the chart that The smaller the number the faster the shutter opens and closes meaning less light can hit the camera. This looks more into the exposure of the images but it is good knowledge to understand how the seconds in the shutter being open affect the results. The slower the shutter speed, the longer the time passes from when you press the button on the camera to when it is taken. Thus meaning more light is let in and images may become like that one at the bottom of the chart. 4. This photograph was taken at an exposure time of 1/200 of a second. This was taken quicker as it is designed to capture the moving car and had to allow as little light as possible. The photograph was taken at a slower shutter speed of 1/15 of a second meaning the camera took longer to react and ultimately came out blurred. It is just quick enough to capture what the subject is in the photograph. The Photograph was taken at a very slow exposure time of 1/4of a second. This meant that not only would the photograph be blurred but it would allow that much light that the image would be very difficult to see. 5. ISO settings The ISO setting on a camera changes how sensitive the sensor is to light. The lower the ISO number, the less sensitive it is to light meaning a darer image will be produced but will be less likely to have noise in.Noise being the grains that appear on a image that may have also been caused due to camera shake.Using a larger ISO on a camera would mean that it will be more sensitive to light.A good image would be considered to be in the middle of the scale as it would have enough light however it would not be over exposed. 6. This photograph was taken at a much lower ISO of 100. This has allowed less light in the camera due to having such a fast speed. The shutter speed setting on this ISO was of a second. From these images it is clear that the speed of the camera and light determine how well the image is. This Photograph was taken at an ISO of 800. This is seen as a good image because it captures the natural daylight by having just the right amount of light in the lens. This photograph had a shutter speed of 1/15th of a second, this is seen by capturing all the necessary detail in the image.This photograph was taken at an ISO of 3200. This shows an over exposure to light meaning the image is a lot lighter than the other lower ISO images. You start you lose detail such as in the centre of the stairwell and lose colour on the walls and ceiling. 7. Here is an example of Camera Shake. This produces grain in the image meaning it becomes harder to see.When zooming close into the image it becomes more clear that it has been over exposed and does not have any detail in the object.However in contrast to this image of the same object, it has been taken with steady hand and with a lower ISO to avoid any Noise or Camera shake. 8. This is an example of Noise in an image. A Large ISO of 6400 has been used to fully show the grain in the image when zoomed in.8 9. White Balance White Balance is altering the way the camera sees White. White Balance is used to change the way the / photographs are taken, and sometimes is vital to create a photograph suitable to that climate around you. Using the cloudy setting in bright daylight will give your image a warmer, yellow tint to it or the Tungsten setting to make the image blue and more abstract.There are many temperatures when looking at white balance and you can alter an image to whatever colour you wish by taking in certain ways. 10. DaylightShadeCloudyTungstenThe photographs taken with Tungsten and Daylight are very different, However the cloudy setting does very little to change the appearance of the photograph. The shade setting brings out the colour that the natural daylight did not bring, this was found absurd as the shade itself became the brightest setting that was tried. The Tungsten gives a more peculiar impression to the photograph and this may be used when capturing something more exciting such as an moving object. 11. Original imageCropped image- This technique takes away parts of the photograph you do not want to be visible, such as here the top of the building has been cut off from the original as that was adding more of a darker tone to the image. 12. Levels This tool on the left is found in Photoshop and used to tilt the levels to whatever colour or brightness you choose. The brightness can also be controlled in certain parts of the image and not the full photograph. For example here the original image has had a sharper improvement towards the top in the centre. 13. Curves- Similar to Levels, this controls where the light is shared on the photograph. You can also change the colour of the light.Burning- Unlike Dodging, Burning takes all the light away from the parts you do not want. 14. Dodging Dodging has been used to bring out the colour in the parts where the natural daylight has not brought out.Colour Adjustments such as Hue and saturation have been used to tilt the colour balance to more of a green image.