"Cool" Metal Roofs

“GREEN” STRENGTH IN TODAY’S ROOFING

A division of the Jones-Blair Corporation

NEOGARD® CREDENTIALS:

World’s leading producer of Elastomeric Coating Membrane for construction 45-year history as the innovators in Polymeric Coating Technology, and 75 years

in the Coating Industry An international network of Licensed Applicators plus Performance Based

Contractors Bio-Based Roof Coating Membrane Systems Available (20% soy product)

- Listed on USDA website: www.biopreferred.gov

International Standard ISO 9001:2000 UL Class “A” Fire Rated Recognized by Factory Mutual LEED Friendly Miami Dade County Approved Member of U.S. Green Building Council CRRC Energy Star rated

A division of the Jones-Blair Corporation

TAX ADVANTAGESAccording to Sec. 1.162-4 Repairs of IRS Tax Code:

Roof maintenance systems are fully tax deductable as an operating expense. One of the key advantages of a restoration system over a new roof system is in how it is classified by the IRS. Restoration is classified as a maintenance, and in most cases it can be expensed in the accounting period it is incurred. On the other hand a new roof system is a capital asset that must be amortized over a 39 year life.

ROOF PICTORIALS

ELASTA-GARDDIRECT-BOND, FLUID-APPLIED ROOF SYSTEMS

COMPATIBLE OVER:

- BUILT-UP ROOFING (BUR)- MODIFIED BITUMEN (MB)- SINGLE-PLY- EPDM- METAL- CONCRETE

A division of the Jones-Blair Corporation

Urethane vs Acrylic

Urethane

• Tensile Strength – 1,500 psi• Elongation – 360%• Water Absorption - <3%• High Impact Resistance• Chemical Resistant

Urethane is used exclusively for all Elasta-Gard Direct Bond Systems

Acrylics

• Tensile Strength – 300 psi• Elongation – 300%• Water Absorption – 20%• Low Impact Resistance• Suspect to Chemical Attack

ELASTA-GARD MNEOGARD® Metal Roof Coating Membrane System

York Label CompanyKansas City, MO

Curt CarpenterOwner - C&G COATINGS

Your NEOGARD® Representative

60,000 sq.ft. metal roof

Roof before applying coating membrane

Roof before applying coating membrane

Prep Work

Seal Penetrations & Vertical Seams with Polyurethane Foam

Polyurethane foam

Polyurethane foam on vertical seams

Caulk & Apply Basecoat to Screws

Tape & coating on holes

Caulk & Coating

Horizontal Seams Taped & Base Coated

All Seams & Screws Base Coated Prior to Applying the Topcoat

Roof is totally waterproofed prior to application of white topcoat

Finish Pics!

Acrylithane MRC Topcoat over Metal (any color can be matched)

BeforeAfter

Polyurethane Foam Roof Systems

COMPATIBLE OVER:

- BUILT-UP ROOFING (BUR)- MODIFIED BITUMEN (MB)- SINGLE-PLY- EPDM- METAL- CONCRETE

A division of the Jones-Blair Corporation

Screws

Seam

First Pass of Foam

2nd Pass

Before

After Polyurethane FoamOver Metal Roof

Metal Roof

Polyurethane Foamover metal roof

15-year Hail Resistant Warranty

2”, 3lb/cu.ft. Polyurethane Foam

2 Base Coats – 37 Mils

2 Topcoats – 18 Mils

Total 55 Mils Coating w/granules

NO SEAMS OR LOOSE SCREWS!!

If it’s good enough for the New Orleans Superdome………………..

Polyurethane Foam Base with NEOGARD® Urethane Coating

Re-roofed after Hurricane Katrina damage in 2006

CURT CARPENTER C&G COATINGS

Your NEOGARD® Representative

Thank you for your time. Please feel free to contact me for an estimate or more information on the NEOGARD® product and

application that’s right for you.

8228 Marshall Dr.Lenexa, KS 66214

913-438-2412 – office913-634-2588 – cell913-492-4362 – fax

cgcoatings@kcnet.comwww.cgcoatings.comwww.neogard.com