View
26
Download
5
Category
Preview:
Citation preview
F i b e r O p t i c S o l u t i o n s 1/3
www.suntelecom-cn.com • +86-21-60138638 • ics@suntelecom.cn
2 Fiber and 4 RJ45 Ports POE Fiber Switch
The Ethernet fiber switches designed to transmit and receive 4-ch 10/100 Mbps data over two user
selectable SFP options. Available in commercial temperature grade, units feature half or full duplex
mode and Auto-Negotiation to 10Mbps or 100 Mbps Ethernet rate without adjustments. The optical
interfaces operate at rate of 100Mbps.
Plug-and-play design ensures ease of installation and no user electrical or optical adjustments are
required. Features Included are low power consumption, LED indicators for monitoring equipment link
and performance operating status and auto resettable voltage transient fuses. With 12-48VDC input
voltage on standalone, industry highest density 15 card slots, 1 PSU or 13 slots and 2 PSU per 19"Lx4U
Rackmount Chassis, the Ethernet fiber switches are outstanding products for transmission of 4-ch
10/100Mbps Ethernet signals.
Features 4 x 10/100Mbps Ethernet Ports
2 x 100BASE-FX SFP Ports (SC or LC)
Electrical port supports Auto-Negotiation for 10Mbps or 100Mbps, full or half duplex mode
Optical port supports 100 Mbps full duplex data
Automatic MDI/MDI-X crossover cables
Transparent to data encoding/compatible with major data protocols; IEEE 802.3 compliant
No Electrical or Optical User Adjustments
Performance and Link Status Indicator LEDs
Voltage Transient Protection on Power/Signals
Auto Resettable Fuses on Power Lines
Hot-Swappable Rackmount Cards
Designed with Lowest Power Consumption
Highest Density - 15 Slots and Power Supply
F i b e r O p t i c S o l u t i o n s 2/3
www.suntelecom-cn.com • +86-21-60138638 • ics@suntelecom.cn
12-48VDC Input Voltage (Standalone)
90-130VAC or 180-264VAC (19" Chassis)
Specifications
Parameters Specifications
Data Data Interface 4 x 10/100BaseT(X) RJ-45 ports
Data Rate 10/100 Mbps
Switch Parameters
MAC Table 1K
Switching Delay (μs) <5
Packet Buffer 512Kbit
Processing Type Store and Forward
POE Parameters Power of PoE 48V, 15.4W
Status LEDs
Power POWER
Interface Link/ACT, Speed (RJ-45 Port)
Optical Link1/ACT, Link2/ACT
Connectors
Optical SC or LC (SFP)
Power Terminal Block
Electrical 4 x RJ-45
Optical Parameters
Fiber Type SFP Dependent
Wavelength Multi-mode SFP Dependent
Wavelength Single-mode SFP Dependent
Electrical/Mechanical
Input Power, Standalone Units 48VDC(PoE)
Input Power, Rack Units From Rack
Power Consumption (W) 5
Overload Circuitry Support
Housing Aluminum, Fanless
Protection Class IP40
Dimensions (W×H×D) ( mm) 187 x174 x 25
Weight(g) 600
Installation Standalone / Rack mount
Environmental
Operating Temp.( °C) -10~70
Storage Temp. ( °C) -25~100
Relative Humidity 0% to 95% (non-condensing)
MTBF (h) >100,000
F i b e r O p t i c S o l u t i o n s 3/3
www.suntelecom-cn.com • +86-21-60138638 • ics@suntelecom.cn
Application
Note: For the necessity of improvement, the material contained in this document is subject to change without notice.
Recommended