EcoFasten Solar® GreenFasten™

How Do You AttachJust About Anything

To Just About Any Roof?

GreenFasten™ Works With Virtually All Roof Racks and Accessories

Versatile

Modular

Compatible

GreenFasten™

GreenFasten™

Residential Use

Bolts directly to roof.

Slate, Shake...

Tile…

Shingles…

And More.

Green-Fasten For residential use No base plate Uses 1 lag bolt – 2 bolt

version available. Various flashings available Assorted Attachment

Brackets / Compression Blocks

How does GreenFasten™ work?

Rubber-Gasketed Flashing that fits under shingles to form a watertight seal.

Fastened Directly to Roof – into Rafter.

Cone-shaped fitting on bottom of top attachment block.

Rubber Gasketed Flashing that fits under shingles to form a watertight seal.

Fastened Directly to Roof – into Rafter.

Cone-shaped fitting on bottom of top attachment block.

Gasketed Aluminum Flashing is available in Black or Mill finish.

Many compression brackets are available.

Installing Green-Fasten Measure, locate the

rafter, snap a line, mark the spot…

Center the Green-Fasten flashing over the rafter.

The upper end of the flashing should be under the next row of shingles.

Drill a pilot hole through the roof material, deck and into the rafter..

Secure the bracket and flashing to the roof and into the rafter using a 3” minimum lag bolt and neoprene-bonded washer.

GreenFasten™ with L-Foot on Asphalt Shingles.GreenFasten™

with Z-Bracket on Asphalt Shingles.

GreenFasten™