View
68
Download
5
Category
Preview:
Citation preview
Figure 1: The patient presented with a failing amalgam restoration on tooth No. 14
Figure 2: Image of the patient’s tooth after restoration removal and caries excavation.
Figure 3: The enamel was etched for 15 seconds
Figure 4: The entire cavity preparation was etched for an additional 15 seconds.
Figure 5: Image of the preparation after rinsing and air drying.
Figure 6: Adhese Universal adhesive was scrubbed into tooth structure for 20 seconds.
Figure 7: The adhesive was dispersed with air until a glossy immobile film layer resulted.
Figure 8: The adhesive was lightly cured with an LED curing light for 10 seconds.
Figure 9: Tetric EvoCeram Bulk Fill in shade IVB was placed.
A contouring instrument ‘OptraSculpt Pad’ was used to contour the composite material.
Recommended