View
254
Download
0
Category
Tags:
Preview:
DESCRIPTION
Fly ash as a wood substitute.
Citation preview
Dr. BABASAHEB AMBEDKAR MARATHWADA UNIVERSITY , AURANGABAD (M.S.)Maharashtra institute of technology,
AURANGABAD
Topic : FLY ASH AS A WOOD SUBSTITUDE
Guide by: Presented by : Mr.D.D.JOSHI RANJEET PADOL
-Fly ash is a waste material from thermal power plants. - which forces a great disposalProblem besides causing atmospheric pollution
-India’s 82 utility and more than 25 captive thermal power plants contribute more than 70 Percent to the countries total electric power installed capacity (approx 100,000 MW). In fact about 240 million tonnes of coal is being used every year to generate electricity.
INTRODUCTION :
FLY ASH:
Fly ash is defined as “A finely divided residue that results from the combustion of ground or powdered coal and is transported from the combustion chamber by exhaust gases”.
CHEMICAL COMPOSITION OF INDIAN FLY ASH-
-Silica (SiO2) 49-67
-Alumina (Al2O3) 16-29
-Iron Oxide (Fe2O3) 4-10
-Calcium Oxide (CaO) 1-4
-Magnesium Oxide (MgO) 0.2-2
-Sulphur (SO3) 0.1-2
-Loss of Ignition 0.5.3.0
USES OF FLYASH:
- FLY ASH IS A BUILDING MATERIAL
- FLY ASH CLAY BRICKS
- HOLLOW BLOCKS
- FLY ASH CELLULAR CONCRETE
- USE AS PART REPLACEMENT OF CEMENT / MANUFACTURE OF CEMENT:
- FLY ASH LIGHT AGGREGATE
- FLY ASH EMULSION PAINTS /BUILDING DISTEMPERS:
- FLY ASH AS WOOD SUBSTITUTE MATERIAL
USE:A very good wood substitute for doors, windows, ceiling, partitions, furniture, etc.
FLY ASH AS WOOD SUBSTITUTE MATERIAL:
SALIENT FEATURES:-Environment friendly technology.-Fruitful utilization of industrial wastes such as fly ash.-Energy efficient production technology.-Products stronger than woods.-Weather resistant and durable.-Termite, Fungus, rot and rodent resistant.-Fire resistant.-Cheaper than natural wood.-Less maintenance cost.
PLANT DETAILS :
PRODUCTION CAPACITY:-12000 m2 doors/panels per annum (8 hours shift)
SIZE OF PRODUCTION:-Doors:2100 x 900 x 25-30 mm or any other size-Panels:1800 x 900 x (3-25)63
MAIN EQUIPMENTS:
Hydraulic press ,calendaring machine, mixing plant, moulds, sanders, grinder, shearing machine , oven, resin cattle, curing, chamber, cutter.
LAND REQUIREMENT:
•Open area:3,000 sq.mt
•Covered area:500 sq.mt
RAW MATERIALS:
Fly ash polymer, Additive, Woven jute mats.
POWER:
•KW: 40
•Three phaseVoltage: 440V ,50 Hz.
MANPOWER:
Skilled(Nos.): 04
Unskilled(Nos.): 24
TOTAL PROJECT COST:
Toatal:- US$ 263,000
Main equipment US$ 185,000
Essential Spareparts US$ 10,000
Civil Construction US$ 15,000
Design expenses US$ 5,000
Other expenses US$ 3,000
Working Capitals US$ 45,000
FLY ASH PANNEL
FLY ASH DOOR
Mould making..
VIBRATER
ENVIRONMENTAL IMPACTS OF FLYASH:
HEALTH ASPECTS OF COAL FLY ASH:
- THROAT PROBLEM
- LUNGS DISEASES
- RASHES ON WORKER BODY
EFFECT OF FLY ASH IN AGRICULTURE:
i) Modification of soil texture-
ii) Modification of bulk density-
iii) Water holding capacity of soil-
iv) Soil Ph-
v) Effect on soil crust-
CONCLUSION:
The future poses challenges to the scientists, technologists, engineers towards sound management of fly ash disposal & deposition technologies. The problem is not due to lack of technical competence but more of adoption, implementation and better management of improved & appropriate technologies.
Thank you…..
Recommended