Molds design show

Norman F. SimmsCAD Mechanical / Electrical Designer

Mold Design in SolidWorks

2

Inserting Mounting BossesNorman F. Simms Mechanical / Electrical Designer 215-269-

0390

3Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Creating a Reference Plane to Mirror Boss Features About

4Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Completing the Draft Check

5Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Adding Draft – Adding Draft to Yellow Area

6Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Applying Scaling – Due to Plastics Shrinkage when Cooling

7Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Generating Parting Lines

8Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Adding Shut-off Surfaces – Closing the Open Surfaces

9Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Creating Parting Surfaces

10Norman F. Simms Mechanical / Electrical Designer 215-269-

0390

Preparing for the Tooling Split – Creating a New Reference Plane

11

Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Applying the Tooling Split

12Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Displaying and Moving the Core and Cavity Entities

13Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Displaying the Core and Cavity Entities

14Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Renaming and Saving the Tooling Bodies as Individual Parts

Core

Cavity

15

Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Mold Modeling is used in designing all types of complex parts, especially for plastics and is used more in our world today. As an designer, knowing how to create molds for components will always helpful to know.

If you are someone who is trying to understand CAD , I hope this was a help.

If you are someone who needs someone to help them create new designs. I hope you will use the number below and give me a call.

Thank You for Your Time.