Adapting Eddy Current Array Technology for NDT

Adapting Eddy Current Array Technology for NDT Inspections

© Zetec Inc. – All rights reserved

Agenda

• Eddy Current Array Technology

• Why Eddy Current Arrays?

• HX Solution – CXB

• Surface Solution – Surface Array Flex Probe

• Encircling Solution - RCCA

• Eddy Current Engineered to Order (ETO)

2© Zetec Inc. – All rights reserved

Eddy Current Array Technology

© Zetec Inc. – All rights reserved

• Instrument improvements enable use of ECAs

• Large number of small coils

• High sensitivity and wide coverage

• Probe shapes conform to complex surfaces

• Enable inspection in tight access areas

4

Eddy Current Arrays (ECA)

Individual coils

© Zetec Inc. – All rights reserved

ECA System Components

5© Zetec Inc. – All rights reserved

MIZ®-200 InstrumentSurface Array Flex Probe

Velocity® Software

Why Eddy Current Arrays?

© Zetec Inc. – All rights reserved

• Augment or replace PT and MT– Reduced inspection time - data acquisition is fast and easy

– Does not require surface preparation

– Does not create a dirty environment that needs cleaning

– Enables flaw sizing

– Inspections are digitally recorded for archiving and historical comparison

– Improved flaw detection and sizing with C-scan imaging

• Complement UT– Sensitive to surface flaws which are in the ultrasonic “dead zone”

• Couple with an auto-analysis system

7

Why Eddy Current Technology?

© Zetec Inc. – All rights reserved

8

Why Eddy Current Arrays?• Fast inspection

• Improved probability of detection

• Accurate defect positioning using encoded data

• Reliable results from better stability during the inspection

• C-scan imaging for quick and easy data analysis

• Coil configurations for various applications

Single coil: slow n coils: n times faster

© Zetec Inc. – All rights reserved

HX Solution - CXB

© Zetec Inc. – All rights reserved

• Circumferential cracking

• Cracking in the expansion areas

• Close proximity pitting

• Stress corrosion cracking

• Bobbin signals require further characterization

• Mixed-mode signals and complex defects

Inspection Challenges in HX Tubing

10© Zetec Inc. – All rights reserved

• Array and bobbin coils in one probe

• Leverages proprietary X-Probe™ technology developed for highest reliability steam generator inspections

• Bobbin coils provide general detection

• Array coils provide axial and circumferential flaw detection and characterization

• Titanium body for long probe life

CXB Tubing Array Probe

Array coils

Bobbin coils

11© Zetec Inc. – All rights reserved

• Bobbin inspection speeds

• Single pass inspection

• Array probe resolution

• Complementary inspection methods

• Reduce false positives

Why CXB?

12© Zetec Inc. – All rights reserved

• Application– Turbine Generator Condenser Inspection

• Challenge– Multiple tube leaks were causing condensers to be taken off line

– Dual tube sheet structures with multiple expansions

– Tube leaks not detected with bobbin probes

• Solution– CXB4 probe identified numerous defect morphologies

– Detected inlet end erosion, circumferential and axial cracking

CXB4 In Use

13© Zetec Inc. – All rights reserved

14

Easy to Analyze

Axial Flaw

© Zetec Inc. – All rights reserved

15

Easy to Analyze

Circumferential Flaw

© Zetec Inc. – All rights reserved

16

Easy to Analyze

Volumetric Flaw

© Zetec Inc. – All rights reserved

Pitting

17© Zetec Inc. – All rights reserved

Pitting Detection

18

Two Pits in Close Proximity

© Zetec Inc. – All rights reserved

Pitting Detection

19

Row of Pits

© Zetec Inc. – All rights reserved

Stress Corrosion Cracking

20© Zetec Inc. – All rights reserved

Stress Corrosion Cracking Detection

21

Circumferential Crack at an Expansion

© Zetec Inc. – All rights reserved

Pitting and Stress Corrosion Cracking

22© Zetec Inc. – All rights reserved

Pitting and Stress Corrosion Cracking Detection

23© Zetec Inc. – All rights reserved

Array Confirmation

24© Zetec Inc. – All rights reserved

Array Call/Bobbin Miss

25© Zetec Inc. – All rights reserved

Surface Solution – Surface Array Flex Probe

© Zetec Inc. – All rights reserved

• Use surface array probes to

– Augment or replace PT and MT

– Replace single coil ECT

27

Surface Inspections

© Zetec Inc. – All rights reserved

Surface Array Flex Probe• Applications

– Surface and non-ferromagnetic sub-surface inspections

– Smooth weld inspection including crown, toe, and HAZ

– Successfully used in low pressure turbine rotor weld inspection

• Quick and Accurate– Inspection coverage up to 2 inches in a single pass

– Longitudinal, transverse, and oblique cracks as small as 0.020 in.

• Conforms to Various Surface Applications– Flexible pad wraps around weld beads up to 0.197 inches tall

– Detects corrosion under paint without stripping and repainting

28© Zetec Inc. – All rights reserved

• An encoder can be attached to an ECA probe to enhance the quality of the inspection

– Provide distance measurements for signals of interest

– Control the sampling rate of the MIZ-200• Sample rate automatically adjusts based on encoder speed

• Consistent data density regardless of speed

– High encoding resolution aids flaw sizing

29

Encoded Inspections

© Zetec Inc. – All rights reserved

Encircling Solution – RCCA

© Zetec Inc. – All rights reserved

• Designed for Taiwan Power (ISI solution)– Examine 24 rodlet clusters in 2 passes

– Encircling array probe to identify and characterize flaws

– RevospECT to provide fast and consistent results

• Processing power to perform auto-analysis

• Automatically analyzes the data quickly and accurately

• Consistent results using validated analysis techniques

31

RCCA Inspection

© Zetec Inc. – All rights reserved

32

RCCA Inspection

MIZ-200 #1

MIZ-200 #2

© Zetec Inc. – All rights reserved

Eddy Current Engineered to Order (ETO)

© Zetec Inc. – All rights reserved

Eddy Current Engineered to Order (ETO)• Leverage Zetec patented array technology experience

• Solutions for a variety of inspection applications– Rod Cluster Control Assembly

– Fuel Rods

– Turbine Blades, Rotors, Blade Slots

– Carbon Steel Welds

– Complex Welds

– Tank Bottom Integrity

34© Zetec Inc. – All rights reserved

35

Eddy Current Array Technology Provides

Fast, one-pass inspections Helps achieve outage excellence

Recordable replacement to PT and MT Helps achieve outage excellence

Complementary inspections to PAUT Helps achieve outage excellence

Enhanced defect detection and characterization Supports operational excellence

Leveraged technology for custom applications Enhances your cost management

© Zetec Inc. – All rights reserved

Thank You!

Learn more at: www.zetec.com/eddy-current-surface-array-solution/