View
228
Download
6
Category
Preview:
DESCRIPTION
A Prototype of Finger Print Based Licensing system for Driving
Citation preview
A PROJECT REPORT ON
FINGER PRINT BASED LICENSING SYSTEM FOR
DRIVINGUNDER THE ESTEEMED GUIDANCE OF ASST.PROF: N.V.SUBBAREDDY M.TECH.
MEKAPATI RAJAMOHANREDDY INSTITUTE OF TECHNOLOGY AND SCIENCES
AFFILIATED TO JNTUA,UDAYAGIRI,S.P.S.R.NELLORE.
Presented by:B.ANUSHAP.VENGAMAMBAP.SWATHIS.RAMYA
10L41A043210L41A040610L41A043310L41A0407
CONTENTS: Abstract Existing system Proposed system Block diagram Hardware requirements Software requirements Advantages Applications
ABSTRACT:
Driving without license is a major issue in many countries. Survey says that the accidents happened mostly by unlicensed drivers.
So, a new system is proposed i.e., FINGER PRINT IDENTIFICATION.
If the finger print stored in the controller & finger print swiped in the device matches, he/she can proceed for ignition and otherwise ignition will not work.
EXISTING SYSTEM: Unlicensed driving is a matter of concern for
several reasons. It is possible that drivers who have not
undergone appropriate training and testing may be deficient in some aspect of knowledge & skills required to drive safely & efficiently.
To avoid this we proposed a new system.
PROPOSED SYSTEM: To start a vehicle, one of the most popular & reliable personal biometric identification is used ie.,Finger print identification. It is used to authenticate whether the driver
is licensed or not. If the driver has the license, then only
vehicle start. Otherwise it’s in ideal mode. It uses IR sensor to check whether the driver
wear the seat belt or not. The vehicle starts after wearing the seat belt only.
The status of the system is displayed on LCD.
BLOCK DIAGRAM:
MICROCONTROLLERAT89C52
IR Rx
IR Tx
Relay
DC Motor
Power supply
LCD
Finger print
module
Buzzer
PIN CONFIGURATION OF 8052 MICRO CONTROLLER:
FINGER PRINT IDENTIFICATION SYSTEM IN VEHICLE:
LCD:
IR SENSOR:
The infrared transmitter & receiver are
designed to sense the presence or absence of
partitions such that lighting functions change
to accommodate the appropriate size space.
RELAY: A relay is a device that responds to a
small current or voltage change by activating switches or other devices.
Used to remotely switch signals or power.
Input control usually electrically isolated from output.
Input signal determines whether switch is open or closed
PHYSICAL STRUCTURE OF RELAY :
BUZZER:
POWER SUPPLY
Step down transformer Rectifier Filter Voltage
regulator
HARDWARE REQUIREMENTS:
Fingerprint scanner deviceMicrocontrollerMotorRelayIR Sensor
SOFTWARE REQUIREMENTS:
Keil compiler
Embedded C
Proteus
Wilpro
KEY WORDS:
Safe driving. Finger print. Finger print reader. License. Ignition system.
ADVANTAGES:
The security features were enhanced largely for the stability and reliability of owner recognition.
The whole system was build on the technology of embedded system which makes the system more safe, reliable and easy to use.
APPLICATIONS:
It can be used for security purpose of vehicles.
It can be used to prevent the accidents by providing licensed drivers
By using this system no one can drive without license .
ANY QUERIES…
Recommended