Specifications of feed ingredients and finished feeds bis standard

Specifications of feed ingredients and finished feeds,

and BIS standards

Vishnu Vardhan Reddy.PTVM/2015-29

Specifications of feed ingredients

• Specifications are defined as a group of standards given

by Bureau of Indian Standards (BIS) or Indian

Standards Institute(ISI) to different feed ingredients

for feeding of animals.

• These are essential for feed quality assurance

programme.

• And serve as basis for ration formulation.

Specification of Compounded Feeds for Cattle - IS-2052-1979

S.No CharacteristicRequirement

Type I Type II

1 Moisture ,percent my mass (max) 10 10

2 Crude protein (NX6.25), percent my mass (max) 22 20

3 Crude fat, percent my mass (min) 3.0 2.5

4 Crude fibre, percent my mass (max) 7 12

5 Acid Insoluble Ash, percent my mass (max) 3 4

6 Common salt (NaCl) percent my mass (max) 2 2

7 Calcium (as Ca) percent my mass (min) 0.5 0.5

8 Phoshorus (as P) percent my mass (min) 0.5 0.5

9 Vitamin A IU/Kg 5000 5000

Specifications for Compounded feeds for young stock

Two types:

• Calf Starter Meal:- A meal for calves to be made

available from the age of approximately 8 weeks and

to be fed up to approximately 26 weeks.

• Calf Growth Meal:- A meal for calves to be introduced

gradually into the diet from the age of approximately

26 weeks and to be fed up to approximately 108

weeks.

Requirements for Calf Starter Meal

S.No Characteristic Requirement

1 Moisture, percent by weight (max) 10

2 Crude protein, percent by weight 23-26

3 Crude fat , percent by weight (min) 4

4 Crude fiber , percent by weight (max) 7

5 Total Ash ,percent by weight (max) 5

6 AIA, percent by weight (max) 2.5

Requirements for Calf Growth Meal

S.No Characteristic Requirement

1 Moisture, percent by weight (max) 10

2 Crude protein, percent by weight 22-25

3 Crude fibre , percent by weight (max) 10

4 Total ash, percent by weight(max) 5

6 AIA, percent by weight (max) 2.5

Specifications for Poultry feeds

Chicken feeds shall be of six types

• Broiler Starter Feed (BSF) :- an all – mash ration to be

fed to chicks, intended for meat production, up to the

age of 4 weeks.

• Broiler Finisher Feed (BFF):-an all- mash ration to be

fed to chicks, intended for meat production, up to the

age of 6 weeks.

• Chick Feed (CF):- an all-mash ration to be fed to chicks, not

intended for meat production, up to the age of 8 weeks.

• Growing Chicken Feed (GCF) :- A ration to be fed to

growing chickens from 8-20 weeks or until laying

commences.

• Laying Chicken Feed (LCF) :- A ration to be fed to laying

birds from 20 weeks onwards or after laying commences.

• Broiler Chicken Feed (BCF) :- A ration to be fed to breeding

chicken.

Requirements for Chicken feeds

S.No CharacteristicRequirement for

BSF BFF CF GCF LCF BCF

1 Moisture, percent by mass (max) 10 10 10 10 10 10

2 Crude Protein, percent by mass (max) 22 19 22 16 18 18

3 Crude fiber, percent by mass (max) 6 6 7 8 8 8

4 Acid Insoluble Ash, percent by mass (max) 3 3 4 4 4 4

5 Salt ( as Nacl) , percent by mass (max) 0.6 0.6 0.6 0.6 0.6 0.6

6 Calcium, percent by mass (min) 1.0 1.0 1.0 1.0 2.75 2.75

7 Available phosphorus, percent by mass (min) 0.5 0.5 0.5 0.5 0.5 0.5

8 Lysine, percent by mass (min) 0.9 0.9 1.0 0.7 0.5 0.5

9 Methionine, percent by mass (min) 0.35 0.35 0.35 0.25 0.25 0.25

10 ME kcal/kg (min) 2900 3000 2700 2700 2700 2800

Specification for pig feeds

Types of Pig feeds:

a) Pig Starter / Creep feed :- A ration to be fed up to 15

kg live mass when the litter is with sow

b) Pig growth meal :- A ration to be fed from weaning to

35 kg live mass.

c) Pig finishing / Breeding meal :- A ration to be fed to

pigs over 35 kg live mass.

Requirements for Pig feeds

S.No CharacteristicPig starter

/ Creep feed

Pig growth

mealPig finishing

breeding meal

1 Moisture, percent by mass (max) 10 10 10

2 Crude protein, percent by mass (min) 20 18 16

3 Crude fat, percent by mass (min) 2 2 2

4 Crude fibre, percent by mass (max) 5 6 8

5 Acid Insoluble Ash, percent by mass (max) 4 4 4

Mineral Mixtures for Supplementing Cattle feeds

Type 1 :- Mineral mixtures containing salt

Type 2 :- Mineral mixtures without salt

• Type -1 material not less than 70 % by mass of the

material

• Type -2 material not less than 90 % by mass of the

material.

Requirements for Mineral Mixtures containing salt for supplementing cattle feeds

S.No Characteristic Requirement1 Moisture, percent by mass (max) 52 Calcium , percent by mass (min) 183 Phosphorus, percent by mass (min) 9

4 Salt (NaCl), , percent by mass (max) 22

5 Magnesium, percent by mass (min) 56 Iron , percent by mass (min) 0.47 Iodide(KI) , percent by mass (min) 0.028 Copper , percent by mass (min) 0.06

9 Manganese , percent by mass (min) 0.110 Fluorine, percent by mass (max) 0.0511 Zinc, percent by mass (min) 0.312 Cobalt , percent by mass (min) 0.00913 Sulphur, percent by mass (max) 0.4

14 Acid Insoluble Ash, percent by mass (max) 3

Specifications for finished feeds

Specifications for Maize bran

Two types

• Coarse bran :- Consists mostly of the outer coating of

the maize kernel

• Fine bran :- Consists largely of the fine fibrous

material left as a residue after sieving the slurry

subsequent to the removal of germ and coarse bran.

Requirements for Maize bran

S.No Characteristic Coarse bran

Fine bran

1 Moisture, percent by mass (max) 11 11

2 Crude protein, percent by mass (min) 7.5 14.0

3 Crude fat, percent by mass (min) 2.0 2.5

4 Crude fibre, percent by mass (max) 12.5 9.5

5 Total Ash, percent by mass (max) 1.5 1.5

6 AIA, percent by mass(max) 0.5 0.5

Specifications for Wheat Bran• Wheat bran shall be the outer coating with the minimum of

adhering endosperm of the wheat kernel ,separated from

effectively cleaned wheat in the usual process of milling

S.No Characteristic Requirement

1 Moisture, percent by mass (max) 12.5

2 Crude protein, percent by mass (min) 13.0

3 Crude fibre, percent by mass (max) 12

4 AIA , percent by mass (max) 0.25

Specification for Rice bran• Rice bran is the peri carp or bran layer and germ of rice,

with low quantity of hull fragments and clipped or broken

rice as is unavoidable in the regular milling of edible rice.

S.No Characteristic Grade 1 Grade 2

1 Moisture, percent by mass (max) 10 10

2 Crude protein, percent by mass (min) 13 11

3 Crude fat, percent by mass (min) 15 12

4 Crude fibre, percent by mass (max) 10 12

5 AIA, percent by mass (max) 5 8

Specification for Rice polish

• Rice polishing is the finely powdered material obtained in

polishing the rice kernels, after the hulls and bran have

been removed.

S.No Characteristic Requirement

1 Moisture, percent by mass (max) 10

2 Crude protein, percent by mass (min) 11

3 Crude fibre, percent by mass (max) 4

4 Crude fat , percent by mass (min) 0.25

5 Total Ash ,percent by mass (max) 10

6 AIA, percent by mass (max) 1.5

Specification for Tapioca

• The material shall be prepared from tubers of Tapioca.

• Type I :- Chips shall be dry and of thickness not

exceeding 15 mm.

• Type II:- Tapioca flour shall be in the form of a coarse

powder.

Requirements for Tapioca

S.No Characteristic Type1 (chips)

Type 2 (Flour)

1 Moisture, percent by mass (max) 10 10

2 Starch , percent by mass (min) 82 82

3 Total Ash (on dry basis) max 2.5 2.5

4 AIA , (on dry basis) max 1.0 1.0

5 Crude fibre, (on dry basis) max 2.5 2.5

6 Hydrocyanic acid, (on dry basis) max 0.03 0.03

7 Alcoholic acidity(as H2SO4) 90% alcohol (max)

---- 0.15

Specification for Blood Meal

• Blood meal shall be the product obtained by drying

blood which is then ground in the form of a coarse

powder.

• Blood meal shall be free from any spores of Bacillus

anthracis and Clostridium sp.

Requirements for Blood meal

S.No Characteristic Requirement

1 Moisture, percent by mass (max) 8

2 Crude protein, percent by mass (min) 80

3 Crude fat , percent by mass (min) 2

4 Total Ash ,percent by mass (max) 5

5 AIA, percent by mass (max) 1.5

Specification for Meat meal and meat-cum-bone meal

• Meat meal and meat-cum-bone meal shall be coarse, deep

brown coloured powdery material.

S.NO CharacteristicRequirements

Meat meal Meat-cum-bone meal

1 Moisture, percent by mass (max) 10 10

2 Crude protein, percent by mass (min) 70 45

3 Crude fat , percent by mass (max) 6 10

4 Phosphorus(P), percent by mass (max) 1 5 to 7

5 AIA , (on dry basis) max 2 2

Specifications for Bone meal

• Bone meal shall be obtained from un decomposed

bones after removal of adhering tissues, defatting,

sterilization by steam under pressure, drying and

grinding.

• The material shall be nearly white in color .

Requirements for Bone meal

S.No Characteristic Requirement

1 Moisture, percent by mass (max) 7

2 Calcium, percent by mass (min) 31

3 Phosphorus, percent by mass (min) 14

4 Crude fat , percent by mass (min) 1.0

5 Total Ash ,percent by mass (min) 85

6 AIA, percent by mass (max) 1.5

7 Fluorine, percent by mass (max) 0.06

8 Spores of Bacillus anthracis & clostridium sp. Nil

Specifications for Fish meal

• Depending upon their chemical composition two

grades: Grade 1 and Grade-2

• Preparation:-The fish meal shall be prepared by

cooking the raw material or by heat-treating the dried

fish in a steam-jacket cooker, pressing the cooked mass

if necessary, drying and pulverizing the treated

material to the required mesh size.

Requirements for Fish meal

S.No Characteristic Grade 1 Grade 2

1 Moisture, percent by mass (max) 10 10

2 Crude protein , percent by mass (min) 60 50

3 Ammonical nitrogen, percent by mass (max) 0.5 0.5

4 Crude fat , percent by mass (max) 10 10

5 AIA , percent by mass (max) 3 5

6 Chloride(NaCl), percent by mass (max) 4 5

Specifications for Decorticated Groundnut oil cake

• It is expeller pressed decorticated ground nut oil cake shall

be of firm texture

S.No Characteristic Grade 1 Grade 2

1 Moisture, percent by mass (max) 8 8

2 Crude protein , percent by mass (min) 48 43

3 Crude fat , percent by mass (min) 7 6

4 Crude fibre, percent by mass (max) 8 12

5 AIA , percent by mass (max) 2 2.5

Specifications for solvent extracted cottonseed oil cake (meal)

• The solvent extracted cottonseed oil cake (meal) shall be

obtained by extraction of oil by means of a solvent from

the decorticated cottonseed oil cake. or directly from

decorticated cottonseed after a certain preliminary

treatment.

• The meal shall have been subjected to heat and steam

treatment under controlled and regulated conditions so

as to remove traces of solvent.

Requirements for Solvent extracted Cotton seed oil cake (meal)

S.No Characteristic Grade 1 Grade 2

1 Moisture, percent by mass (max) 10 10

2 Crude protein , percent by mass (min) 42 40

3 Crude fat , percent by mass (min) 1.5 2.0

4 Crude fibre, percent by mass (max) 16 18

5 AIA , percent by mass (max) 2 2.5

6 Castor husk, percent by mass (max) Nil 0.005

Solvent extracted sal seed meal

• Sal seed meal shall be produced by extraction of oil by

means of a solvent from decorticated and flaked or

pelletized or both sal seed kernels or expeller pressed

cake of decorticated sal seeds.

• Solvent-extracted sal seed meal shall have been

subjected to heat and steam treatment under controlled

and regulated conditions so as to remove traces of

solvent.

Requirements for solvent extracted sal seed meal

S.No Characteristic Requirement

1 Moisture, percent by mass (max) 10

2 Crude protein, , percent by mass (min) 8

3 Crude fat , percent by mass (max) 2

4 Crude fibre , , percent by mass (max) 3

5 Total Ash ,percent by mass (max) 4

6 AIA, percent by mass (max) 1

Solvent extracted Niger seed oilcake meal

• The solvent extracted Niger seed oil cake (meal) shall

be obtained by extraction of oil by means of a solvent

from the ghani or expeller pressed Niger seed oil cake.

or by pressing clean and sound Niger seeds .

• The meal shall have been subjected to heat and steam

treatment under controlled and regulated conditions

so as to remove traces of solvent

Requirements for Niger seed oil cake meal

S.No Characteristic Grade 1 Grade 2

1 Moisture, percent by mass (max) 9 9

2 Crude protein , percent by mass (min) 35 29

3 Crude fat , percent by mass (min) 1 1

4 Crude fibre, percent by mass (max) 18 20

5 AIA , percent by mass (max) 1.5 2.5

Dried Silk worm pupae meal

• The dried silk worm pupae shall be from brown to dark

brown in color.S.No Characteristic Type 1 Type 2

1 Moisture, percent by mass (max) 10 7

2 Crude protein , percent by mass (min) 50 65

3 Crude fat , percent by mass (max) 25 3

4 Crude fibre, percent by mass (max) 3 4

5 Total ash, , percent by mass (max) 5 6.5

6 AIA , percent by mass (max) 1 1.5

THANK YOU

Vishnu Vardhan Reddy.PTVM/2015-029