My Lesson to Pledges (Sororities & fraternity)

Preview:

Citation preview

MY LESSON TOfraternities and sororities

PLEASE FOLLOWTHESE

INSTRUCTIONS

VOLUME CONTROL• Open up volume control on the computer in Windows XP or

older windows version

VOLUME CONTROL• Open up volume control on the computer in Windows XP or

older windows version• Switch to Recording Control by going in options to

properties and switch to Recording Control. After that, switch to MICROPHONE. and switch back to volume control and then close Volume Control.

FOR VOLUME MIXER• Open up or click up volume mixers on the computer in Windows

Vista or newer windows version

FOR VOLUME MIXER• Open up or click up volume mixers on the computer in Windows

Vista or newer windows version• Or, got to control panel, go to hardware & sound, and click on

manage audio devices. After that, switch to Recording and select MICROPHONE. Finally press OK and close control panel.

Connect your radio or boom box to Microphone with your Mp3 Cable or other auxiliary cable.

The Pink Button is Microphone.The Light Green Button is Speaker phone

The Light Blue Button is Line-Ins.

Plug your Headphone/earphone or computer speaker to the Light green jack (Speaker phone)

Now turn on your radio and test it out on Sound recorder on the computer. It should work.

Make your settings are set up and SAVE it so you really know that works and go on to audio

recorder

FROM WINDOWS VISTA AND NEWER

Open Up START and then Control Panel inside on your computer

FROM WINDOWS VISTA AND NEWER

Click on Hardware & Sound and go in to Sound Manage Devices, you will see Playback,

Recording and Sound

FROM WINDOWS VISTA AND NEWER

Switch to Recording inside Sound / Sound manage devices.

FROM WINDOWS VISTA AND NEWER

Set your default to Microphone and put to the volume so it can be connected from your radio.

FROM WINDOWS VISTA AND NEWER

Set your default to Microphone and put to the volume so it can be connected from your radio.

Now, there is no limit how much time you put in recording. Save your work before you lose it.

MEMORIZE THIS LESSON

DIRECTION TO THIS LESSON• Insert your audio tapes in the tape player and

rewind it if possible

DIRECTION TO THIS LESSON• Insert your audio tapes in the tape player and

rewind it if possible• If you have sound recorder on windows vista

and newer, open up this program

DIRECTION TO THIS LESSON• Insert your audio tapes in the tape player and

rewind it if possible• If you have sound recorder on windows vista

and newer, open up this program• If you have audacity or other mp3/audio

recorder, press the record button if the recording control is already set to microphone

DIRECTION TO THIS LESSON• Press the play button on your tape player.

DIRECTION TO THIS LESSON• Press the play button on your tape player.• Get the ones you want

DIRECTION TO THIS LESSON• Press the play button on your tape player.• Get the ones you want• If you are playing 1 side only, play this side to the end and

Save your project.

DIRECTION TO THIS LESSON• Press the play button on your tape player.• Get the ones you want• If you are playing 1 side only, play this side to the end and

Save your project.• If you are playing both sides on this tape, press the pause

button after it ends, then back to the record button after pressing the play button the play the other side

DIRECTION TO THIS LESSON• Press the play button on your tape player.• Get the ones you want• If you are playing 1 side only, play this side to the end and

Save your project.• If you are playing both sides on this tape, press the pause

button after it ends, then back to the record button after pressing the play button the play the other side

• Now when is complete then save your project, I know it takes a little long, but save it before your lose it.

THANK YOU FOR LISTENING

Recommended