ZTE EMS GSM Data Configuration V1.0

GSM Data Configuration

Editor: Cola Wong

GSM Neighbor Cells

Make Backup Config in BSC Function BCCH Frequency Modify TCH Frequency Modify 2G Dump file Export 2G Dump file Import 2G Radio Parameters 2G External Cell Configuration 2G Adjacent Cell Configuration 2G External&Adjacent Cell Configuration Import Switch Configuration Synchronize Modified Data

Make Backup Config in BSC Function1.Log in ZTE EMS, Configuration on toolbar to click NE Management

Make Backup Config in BSC Function2.Select BSC or RNC, right click to Start NE Management

Make Backup Config in BSC Function3.Finish “Start NE Management”, right click Configuration Management

Make Backup Config in BSC Function4.Shown below is Open Configuration Management, click + to show more details

Make Backup Config in BSC Function5.Finish clicking “+” you will see all functions on OMCR

Make Backup Config in BSC Function6. Apply Mutex Right in order to Operate action

Make Backup Config in BSC Function7.Get Mutex Right from EMS, show “Green lock”

Make Backup Config in BSC Function8. Right click “Config Set XXX”—Subtree Copy

Make Backup Config in BSC Function9.Back to BSC Management to right click to Subtree Duplicate –Subtree Paste

Make Backup Config in BSC Function10. Subtree Paste Progress

Make Backup Config in BSC Function11.Finish “Subtree Paste”, new Backup Config will be shown under Master Config

BCCH Frequency Modify

TCH Frequency Modify

2G Dump file Export1.Export 2G Dump file(Network Plan Data) on BSC Function by right click

2G Dump file Export2.Select sub-sheet or all sheet

2G Dump file Export3.Click OK

2G Dump file Export4.Select format of Exporting

2G Dump file Export5.Save route for Dump files of exporting

2G Dump file Import1.Select Import function

2G Dump file Import2.Select import file’s format

2G Radio Parameters1. BSC Level Parameters

2G Radio Parameters2.Site Level Parameters

2G Radio Parameters3.Cell Level Parameter (Power Control,HO Control,TRXs etc)

2G Radio Parameters4.Handover Control Parameters

2G Radio Parameters5.SDCCH Handover Control Parameters

2G External Cell Configuration1. Check specific BSC all GERAN External Cell Config

2G External Cell Configuration2. Check External Ncells information

2G Adjacent Cell Configuration1.Check specific Cell’s Adjacent Cells under Cell level parameter

2G Adjacent Cell Configuration2.Show Adjacent Cells belong to Specific Cell(e.g.EN0010A)

2G External&Adjacent Cells Import 1.Right Click “BSC Function” with Mutex avaible --- “Import Config Data”--- “Batch Apply Network Plan Data”

2G External&Adjacent Cells Import 2.Select file to import

2G External&Adjacent Cells Import 3.Show for External import file when realize on EMS

2G External&Adjacent Cells Import 4.Show for Adjacent import file when realize on EMS

Clarification for External and Adjacent Cell Configuration1.Must Define External first,and then Define Adjacent ncells

2.Must Delete External first,and then Delete Adjacent ncells

ENZBSC13 ADD NeighborHoResel-1009

ENZBSC13 ExternalGsmCell-1009

Attach that import templete for Adjacent and External cells

Parameters

Values on EMS

900 1800

Frequency band(FreqBand) 0 2

Max power level of MS(MsTxPwrMax) 5 0

Parameters

Handover Forward

900-900 900-1800 1800-900

MIN threshold of signal level for handover on PBGT(HoMarginPbgt) 29 36 20

Adjacent cell handover and reselection ID(HoResObjectId) Range from 1 to 64 cycle use

Ncells Modified Relative Parameters

Switch Configuration1.Select Backup Config,double click will be seen right side

Switch Configuration2.Click lable to switch to be Master Config

Synchronize Modified Data1.Finish Modification

Synchronize Modified Data2.Apply Mutex,right click, “Config Data Managed Element”— “Synchronize Modified Data”