Zippie how to embroidery · how to embroider your zippie animals . step 1 chose your zippie animal...

checklist:Select your embroidery frame, square or circular will fit.15cm or 18cm diameter will suit most of our zippies.

Cut a couple of sheets of backing the size of your frame.Place this under your frame which will sit inside your teddy.This will help stabilise your fabric and avoid any slippage.

Cut a sheet of aquafilm the size of your frame. Place this over your frame which will sit outside your teddy.This will help stitches sit on top of the fur and not sink in.

top tip:Lining up your zippie is an important step!Mark a centre point + on a piece of tape and stick to yourzippie tummy. Use this to guide the centre of your frame,you can remove this once linked to the machine.Laser needles will also help guide you.

HOW TO EMBROIDER YOUR ZIPPIE ANIMALS

STEP 1CHOSE YOUR ZIPPIE ANIMAL

FROM THE COLLECTION

STEP 2UNZIP YOUR

ZIPPIE

STEP 3REMOVE THE

INNER STUFFING

STEP 4FRAME UP

YOUR DESIGN

STEP 5RETURN THE STUFFING

& ZIP BACK UP

STEP 6ENJOY

LET YOUR IMAGINATION RUN WILD

HOW TO FRAME UP YOUR ZIPPIE