View
215
Download
1
Category
Tags:
Preview:
Citation preview
XX Month 20XX ME 428 – Technical Design Review
Bigger, Better, BadderWidgets for Whistling
Dixie
Your Names Here
Mechanical Engineering Department
California Polytechnic State University
San Luis Obispo, California
XX Month 20XX ME 428 – Technical Design Review
Overview of Presentation
• Introduction• Project Plan• Idea Generation• Comparing Alternatives• Design• Conclusions• Recommendations
XX Month 20XX ME 428 – Technical Design Review
Summarize the Results• Give main recommendations at the
beginning
• No suspense
• Just the facts at first, the “what” not the “why”
• No details
• Then get on with the story
XX Month 20XX ME 428 – Technical Design Review
XYZ Design is “Slick” and Meets Objectives
Features• Light• Fast• Looks Good• Unique
Introduce the design, the answer, No “Mystery” presentations, tell them what you arrived at right up front (may take a couple of slides)
The Conclusionthe “Story”
Give the audience the context for the details to be presented next, “tell them what you are going to tell them”
Actioncaption:each slide tells its own story
XX Month 20XX ME 428 – Technical Design Review
XYZ Design Exceeds Detailed Requirements
• Functional
– jumps over buildings
– serves breakfast
• Performance
– 20 lbs in weight
• Aesthetic
– purple
Design Requirements - Restate the problem definition, give detailed requirements overview (give the important stuff, what drove the design)
Note the Action Caption
XX Month 20XX ME 428 – Technical Design Review
(A Few Things to Note)
• Interesting background/color scheme
• Slides are not “busy”
• Subtle tie of business with Cal Poly ME
XX Month 20XX ME 428 – Technical Design Review
The Scary Facts
• In two weeks you will be presenting your final project in class
• In three weeks you will be presenting your final project to your sponsor
XX Month 20XX ME 428 – Technical Design Review
Design Review Contents
• Inform – give structure of problem
• Show choices and comparison of alternatives
• Warn of possible dangers and pitfalls
• Give your best recommendation(s) for the course to follow (you keep returning to this)
XX Month 20XX ME 428 – Technical Design Review
Style of Presentation
• Short and sweet
• Not complicated
• Tell a good story
• Avoid busy slides
• Give structure and then fill in details
• Use lots of graphics or photos
XX Month 20XX ME 428 – Technical Design Review
Extensive Trade Study Shows XYZ is the Best Choice
Trade Study Results: Show How You Arrived at What you Didimportant stuff only, an overview
For some projects slides or charts might be thebulk or majority of the presentation
Show that you did your homework, thought about options, used “engineering” to make decisions
Design Weight Color Speed
XYZ 2 Purple Rabbit
Lame 1 200 Brown Tortoise
Lame 2 2000 Black N/A
XX Month 20XX ME 428 – Technical Design Review
XYZ Design Employs Several Key Features
• Super Elastomer Springs
• Carbon Fiber Fiber Reinforced Titanium
• *$^%$&
• *(@$#@$#
Series of charts which explain the design, how it works, its key features
XX Month 20XX ME 428 – Technical Design Review
XYZ Loads Were Derived from Given Requirements
• Statics
• Dynamics
• Vibes
Then go into overview of the engineering details, the methods, the procedures
Put it out there:AssumptionsFBDs, MADs,cost estimates, etc.Limited detailsShow methods
Annotate the graphics not cartoons
XX Month 20XX ME 428 – Technical Design Review
XYZ Structural and Thermal Analysis Confirms Integrity
• Material Properties
• Analysis Techniques
– Beam Theory, Plates
– FEA
– Etc.
Outline the assumptions, analytical methods, and approachNo detailed calcs just an overview
XX Month 20XX ME 428 – Technical Design Review
XYZ Design Peak Von-Mises Stress Shows Factor of Safety of 2.0 on Ultimate
Show selected key results
XX Month 20XX ME 428 – Technical Design Review
Summary of All XYZ Analytical Results Indicates a Robust Design
• Use a table to give results• Or use a bulleted list• Make this crystal clear• Eradicate ambiguity
XX Month 20XX ME 428 – Technical Design Review
XYZ Costs are Well below Target
• XYZ costs are $879 in material, $1026 in labor
• Give tabular breakdown of costs
• Give costs for alternates if appropriate
XX Month 20XX ME 428 – Technical Design Review
XYZ Design is Low Risk
• Robust
• Easy to make
• Current, proven technology
Risk analysis if applicable
XX Month 20XX ME 428 – Technical Design Review
XYZ Design is Way Cool and The Future
• Robust• Light• Low-Cost• Easy to Make
Make your final conclusions, all previous charts should back up this conclusion
Seriously - be honest and, show problems as well, but always have an answer or a fix, depends on audience as to the amount of sales...
XX Month 20XX ME 428 – Technical Design Review
XYZ Design Should Be …
• Recommendation 1
• Recommendation 2
• Recommendation n
• These should point toward the future
• Your customer, after hearing these, should have a clear idea of what to do next
Give them the advice as to what needs to be done next...
XX Month 20XX ME 428 – Technical Design Review
Some More Do’s and Don’tsDo’s
•Know your audience•Know your topic•Be organized•Maintain eye contact;include whole audience•Make audience participants•Maintain clarity in presentation, keep it as simple as possible•Be enthusiastic•Use humor effectively•Watch audience and adapt•Dress appropriately•Be aware of position and distracting movements•Be aware of voice: clarity, speed (slow down), tone, inflection, volume•Use props effectively•Be aware of time•Use clear transitions between sections•Be prepared to answer questions
Don’ts•Failure to adhere to the time limits•Failure to identify the objectives of your presentation•Failure to set limits on the subject (scope)•Lack of organization•Over-complexity of visual aids(too much info, too small print)•Use of terms not familiar to the audience•Give details not related to your main points•Sloppy delivery•Facing the screen with back to audience•Use of inappropriate jokes•Do not use noisy, busy distracting PowerPoint slides or gimmicks
XX Month 20XX ME 428 – Technical Design Review
Presentation Grading Scheme (Reviewers and Professor)(10 pts) 1. Quality of Presentation Delivery
– Do Presenters have a professional appearance?– Are voices clear and easy to understand?– Do presenters face the audience and not block the screen?– Are transitions handled smoothly?– Are presentation tools used properly and with confidence?– Do presenters use too much slang or inappropriate remarks in presentation?
(10 pts) 2. Preparedness– Is the “story” well planned?– Was stage well set with sufficient background material?– Are relevant questions handled well?
(10 pts) 3. Quality of Presentation Slides– Clear and readable?– Logical Organization?– Appropriate Level of detail/abstraction?– Effective use of Graphics, illustrations, drawings?– Are there spelling, grammar, capitalization, or punctuation mistakes on the slides?
(10 pts) 4. Completeness of Presentation– Are all required areas addressed?– Has sufficient information in each area been provided?– Were hard-to-understand points conveyed with sufficient graphical aids?
(10 pts) 5. Thoroughness of Design– Have important design issues been overlooked?– Has the design process proceeded in a logical sequence?
Recommended