[XLS] · Web viewMulti-Response Optimization Of Al2024/Red Mud Mmc Using Hybrid...

Preview:

Click to see full reader

Citation preview

Special Issue Manuscript Tracking FormJournal Title:

Special Issue Title:Guest Editor:

Guest Editor Email:Guest Editor Phone No.

Ms ID # Paper id Manuscript Title

7_ICMPC_1 101 Regular

7_ICMPC_2 102 Regular Diptikanta Das

7_ICMPC_3 104 Regular Diptikanta Das

7_ICMPC_4 105 Regular Rajneesh Verma

7_ICMPC_5 107 Regular Kaushik Kumar

7_ICMPC_6 112 Regular Ch.Hima Gireesh

7_ICMPC_7 113 Regular

7_ICMPC_8 114 Regular Himanshu Bisaria

7_ICMPC_9 117 Regular BharadwajAdiraju

Article Type

Corresponding Author Name

Synthesis and Characterization of Al-alloy by Mechanical alloying

Shailesh Kumar Singh

Characterization of the developed aluminium matrix composites-an

experimental analysis

Experimental investigation on material removal rate and chip

forms during turning T6 tempered Al 7075 alloy

Characterization of Mechanical Properties of Short Kenaf Fiber-

HDPE Green Composites

Biomedical Design of Powered Ankle- Foot Prosthesis – A

Review

Mechanical Characterization of Aluminium Metal Matrix

Composite Reinforced with Aloe vera powder

Effect of Heat Treatment on the Characteristics of Electroless Ni-

B, Ni-B-W and Ni-B-Mo Coatings

Arkadeb MukhopadhyayStudy on Effect of Machining

Parameters on Performance Characteristics of Ni-rich NiTi Shape Memory Alloy during

Wire Electric Discharge MachiningSynthesis of activated carbon

from agricultural waste using a simple method: Characterization, parametric and isotherms study

C3
Enter the full title of the journal the special issue will be published in.
C4
Enter the full title of the special issue as you wouldl ike it to appear in print.
C5
Enter your name as you would like it to appear in print.
A9
Enter the manuscript identification number (Ms ID #) of the manuscript. NOTE: Upon acceptance, please include the manuscript number in the filename of the electronic files of the manuscript.
C9
Upon submission: Enter the full manuscript title. Upon acceptance: Update the title if it has changed during the review process.
D9
Enter the article type associated to the manuscript, eg. "Short Communication", "Review article", "Regular article", "Editorial".
E9
Enter the corresponding author's full name and degree(s) as it appears on the title page of the manuscript.

7_ICMPC_10 118 Regular Manowar Hussain

7_ICMPC_11 121 Regular S. Nalini Jayanthi

7_ICMPC_12 122 Regular N.Bhuvaneswari

7_ICMPC_13 123 Regular Shailesh Kumar Singh

7_ICMPC_14 125 Regular Gopal Nandan

7_ICMPC_15 126 Regular J. Mishra

7_ICMPC_16 128 Regular B.C. Routara

7_ICMPC_17 130 Regular C.M. Joseph

7_ICMPC_18 131 Regular Chethan.k.n

7_ICMPC_19 132 Regular Jaydeep M. Kapopara

7_ICMPC_20 133 Regular

7_ICMPC_21 134 Regular Aruri Devaraju

Laser sintered TiN reinforced Ti6Al4V Alloy based MMC:

fabrication, characterization and performance

Growth and characterization of L-histidinium perchlorate crystals

(LHP)

Effect of L-threonine on the optical and electrical properties of

TTZS crystal

Processing and Characterization of Fly-ash Compacts

Study of Phase Change materials and its domestic application

Adsorption characteristic study of activated carbons down to 4.5 k

Study of machining characteristics of Inconel 601in

EDM using RSM

Dynamic Response studies of GeTe devices for memory

applications

Fabrication and Mechanicalcharacterization of

aluminium [6061] with conventionally prepared

bamboocharcoalSynthesis And Studies Of

Titanium Based Films Deposited At Different Oxygen Flow Rates

PROPERTIES of SCC in GREEN and GREY STATE

Hamid Eskandari-Naddaf

Influence of Tool Rotational speed and Pin Profile on

Mechanical and Microstructural Characterization of Friction Stir Welded 5083 Aluminium Alloy

7_ICMPC_22 137 Regular Saurabh Dewangan

7_ICMPC_23 138 Regular Vemu Vara Prasad

7_ICMPC_24 139 Regular Gopal Nandan

7_ICMPC_25 140 Regular Tanmay Jain

7_ICMPC_26 143 Regular Rajat Upadhyaya

7_ICMPC_27 144 Regular Ankush Anand

7_ICMPC_28 145 Regular S. K. Rajput

7_ICMPC_29 148 Regular

7_ICMPC_30 149 Regular K. Buschaiah

7_ICMPC_31 150 Regular Radha Krishna Lal

7_ICMPC_32 152 Regular Anoopnath P. R

7_ICMPC_33 153 Regular Eswara Kumar A

7_ICMPC_34 156 Regular

Wear Characterization into WC-Co by FESEM

A Review On Rotating Arc Welding Process

Sodium Silicide As A Hydrogen Source For Portable Energy

Devices: A Review

Study of emission parameter of biodiesel from non edible oil

sources.

Effect of some inoculants on the structure and properties of thin

wall ductile iron

An Assessment of Tribological Characteristics of Different Materials under Sea Water

EnvironmentEffect of heat treatment and

uniaxial deformation on thermal stability and wear behavior of AA

2014 alloyImproving supply chain performance by Supplier

Development program through enhanced visibility

Sudeep Kumar Pradhan

Investigation On The Influence Of Edm Parameters On

Machining Characteristics For Aisi 304

Residual Stress analysis of Equilateral Triangular Sectioned bar ofLinear Work- Hardening

Materials under Torsional Loading

Hertz Contact Stress of Deep Groove Ball Bearing

Effect of Thermal Environment on Buckling of Thick Cylinder Subjected to Combined Axial

Compressive and External Pressure loadsPerformance And Emission

Characteristic Of A Multicylinder DI Diesel Enginerunning On

Diesel And Biofuelsblendedwith Methanol

Hiregoudar Yerrennagoudaru

7_ICMPC_35 157 Regular Dr. A.R Anwar Khan

7_ICMPC_36 158 Regular Kanishka Jha

7_ICMPC_37 160 Regular Naseeb Khan

7_ICMPC_38 162 Regular Gurprit Singh

7_ICMPC_39 165 Regular

7_ICMPC_40 166 Regular Sivaselvi K

7_ICMPC_41 172 Regular Vilas G Dhore

7_ICMPC_42 173 Regular Mobi Mathew

7_ICMPC_43 175 Regular Swades Ranjan Bera

7_ICMPC_44 176 Regular Sandeep Kumar

7_ICMPC_45 177 Regular C.M. Joseph

7_ICMPC_46 181 Regular Sarfraj Ahmed

Characterization of Agricultural Waste Sugarcane Bagasse Ash at

11000C with various hours

Characterization of Biodegradable Composites and

Application of Preference Selection Index for Deciding Optimum Phase Combination

Performance and emission characteristics of a diesel engine with varying injection pressure and fueled with hydrogen and

cottonseed oil methyl ester blends

Effect of hard faced Cr-alloy on abrasive wear of low carbon

rotavator blades using design of experiments

Synthesis and Study of Reduced Graphene Oxide layers under

Microwave Irradiation

Vasudeva Rao Veeredhi

Polymer thin film coating on Biomaterial

Synthesis and Characterization of High Yield Multiwalled Carbon Nanotubes by Ternary Catalyst

Outdoor measurement of mono and poly c-Si PV modules and

array characteristics under varying load in hot-humid

tropical climateBiosynthesis and characterization of Thevetia peruviana leaf extract

capped CdTe nanoparticles in photoconductive and photovoltaic

applicationsThe Influence of Cold Forging Process on the Microstructure, Porosity and Wear Behavior of

Spray Formed Al-Si Alloys

Effect of thickness on bistable switching characteristics of a

pentacene based memory device

A Review On Slurry Abrasion Of Hard Faced Steels

7_ICMPC_47 182 Regular Nitin G. Kanse

7_ICMPC_48 184 Regular Amit R Patil

7_ICMPC_49 187 Regular Aditya Kumar

7_ICMPC_50 190 Regular A Sambasiva Rao

7_ICMPC_51 192 Regular Ladeesh V G

7_ICMPC_52 193 Regular M.Senthi Raja

7_ICMPC_53 194 Regular Anubha Deshpande

7_ICMPC_54 195 Regular T. Sarkar

7_ICMPC_55 198 Regular Raktim Bhattacharya

7_ICMPC_56 201 Regular

7_ICMPC_57 202 Regular Prashant Dhanke

Effect of Feed Temperature and Solution Concentration on

Pervaporation for separation of Azeotropic Mixtures

Comparative study on Effect of Biodiesel on CI Engine

Performance and Emission Characteristics

Risk Assessment in Automobile Supply Chain

Characterization of Ni-Fe-W matrix alloys in as-cast and heat

treated conditions

Performance study and mathematical modeling of

grinding aided electro-chemical discharge drilling (G-ECDD) of

soda-lime-silica glass

Modified Rotor Material for Minimization of Torque Ripple for Interior Permanent Magnet

BLDC motor

Microstructural Characterization of Metastable Beta Titanium

Alloys in Hot Rolled and Solution Treated condition

Mechanical and Tribological Characteristics of Copper Alloyed

Austempered Gray Cast Iron (AGI)

A Study On The Effect Of Process Parameters On Weld

Width And Heat Affected Zone Of Pulsed Laser Welding Of

Dissimilar Transparent Thermoplastics Without Filler

Materials In Lap Joint Configuration

Advances and Researches on Non Destructive Testing: A Review

Sandeep Kumar Dwivedi

Degradation of Fish Processing Industry Wastewater in Hydro-

cavitation Reactor

7_ICMPC_58 203 Regular K. K. Kishore

7_ICMPC_59 204 Regular Lakshmi Yadav

7_ICMPC_60 205 Regular

7_ICMPC_61 206 Regular Mukesh Kumar

7_ICMPC_62 207 Regular M.Ayaz Afsar

7_ICMPC_63 208 Regular Ajay Verma

7_ICMPC_64 211 Regular D. Mohana krishnudu

7_ICMPC_65 215 Regular Madhavi Barla

7_ICMPC_66 216 Regular Ajay Verma

7_ICMPC_67 217 Regular Sunil R.Patil

7_ICMPC_68 222 Regular Aashish Gandigude

7_ICMPC_69 223 Regular U. Ravi Kiran

7_ICMPC_70 227 Regular I. Sudhakar

Preparation and characterization of ternary alloy (Al-20Cu-10Mg) reinforced aluminium composite

Effect of calcium on mechanical and tribological properties of Mg-

Sn alloy system fabricated by powder metallurgy (PM) process

Design of Single Cavity Band Pass Graded Index Optical Filter

with Quintic Apodization

Vemuri SRS Praveen Kumar

Determination of optical constants of tantalum oxide thin film deposited by electron beam

evaporationExperimental Investigation on

Externally Scavenged S.I.Engine with Aluminium as Piston

MaterialLogistics Management in Supply

Chain – An Overview

Synthesis, Characterization, and Properties of Epoxy Filled Luffa cylindrica reinforced composites

Influence of Strain Hardening Behaviour in Friction Stir Welded Joints of Aluminium-alloy Plates

Inventory Management in Supply Chain

Effect of Volute Tongue Clearance Variation on

Performance of Centrifugal Blower by Numerical and

Experimental Analysis

Simulation of Rocket Cook-Stove Geometrical Aspect for its Performance Improvement

Effect of swaging and aging heat treatment on microstructure and

mechanical properties of tungsten heavy alloy

Study on Corrosion Behavior of Heat Treated High Carbon Low

Alloy Steel

7_ICMPC_71 228 Regular Ashish Thakur

7_ICMPC_72 232 Regular Nisha Singhal

7_ICMPC_73 233 Regular M Anil Prakash

7_ICMPC_74 237 Regular V Vijaya Rama Raju

7_ICMPC_75 239 Regular Amit Suhane

7_ICMPC_76 242 Regular Sanjay Soni

7_ICMPC_77 247 Regular Prakhar Chansauria

7_ICMPC_78 251 Regular Utkarsh Pandey

7_ICMPC_79 252 Regular Rajesh Purohit

7_ICMPC_80 253 Regular Anant Saraogi

7_ICMPC_81 262 Regular Dr. Priti Mishra

7_ICMPC_82 301 Regular Mohd Azmal Hussain

Characterization and Evaluation of Mechanical Behavior of

Epoxy-CNT-Bamboo Matrix Hybrid Composites

An Application of Similarity Measure of Fuzzy Soft Sets in

Verndor Selection Problem

Facility Location Problems In The Presence Of Two Elliptical

Forbidden Regions

Development of Processes and Characterization of Ferro Magnetic Materials for

Manufacture of Transformer Core and Motors for Higher Efficiency

Prospects of Torsen Differential in Four Wheel Drive Automobile

Transmission System

Synthesis and Characterization of Epoxy based Hybrid Composite Reinforced with Glass Fiber and

Milled Carbon

Effects of Ethanol Blends on Performance of Spark Ignition

Engine-A Review

Study of Fabrication, Testing and Characterization of Al/TiC Metal

Matrix Composites through different Processing Techniques

Synthesis of high surface area mesoporous silica materials using

soft templating approach

Study of performance parameters of fusion bonded epoxy coated

reinforcing bars and their testing

Material delivery problems in construction projects: A possible

solution

Effect Of Different Tool Pin Profiles On The Joint Quality Of

Friction Stir Welded AA6063

7_ICMPC_83 303 Regular A.Venkata Vishnu

7_ICMPC_84 305 Regular A.ElAmri

7_ICMPC_85 306 Regular PradeepJohnson

7_ICMPC_86 309 Regular Anjal R. Patel

7_ICMPC_87 314 Regular Surabhi Lata

7_ICMPC_88 315 Regular S. Gajanana

7_ICMPC_89 318 Regular Radha Krishna Lal

7_ICMPC_90 319 Regular K. Aruna Prabha

7_ICMPC_91 320 Regular Arunangsu Das

7_ICMPC_92 321 Regular Nishant K. Singh

7_ICMPC_93 322 Regular Vijay Gautam

Experimental Investigations of Process Parameters Influence on Surface Roughness in Turning of

EN-353 Alloy Steel under Different Machining

Environments

Humidity and Thermo-Mechanical Cycling Effects on Defects inHot metal forming

processes

Friction Stir Welding Of 321Stainless Steel Plates

byTungsten Lanthanum Tool and ItsJoint Analyses

Investigation of Mechanical Properties for Hybrid Joint of Aluminium to Polymer using Friction Stir Welding (FSW)

Investigation of Chip-Tool Interface Temperature: Effect of Machining Parameters and Tool Material on Ferrous and Non-

Ferrous Metal

Development of Mathematical Model for Metal Removal Rate on EDM using Copper & Brass

Electrodes

Study of factors affecting Springback in Sheet Metal

Forming and Deep Drawing Process

Comparative Study of Wear Patterns of both Coated and

Uncoated Tool Inserts in High Speed Turning of EN36 Steel

RSM Based Study on the Influence of Sintering

Temperature on MRRfor Titanium Powder Metallurgy Products using Box-Behnken

Design

Electrical Discharge Drilling of D3 Die Steel using Air Assisted

Rotary Tubular Electrode

Experimental and Numerical Studies on Springback in U-

Bending of 3-Ply Cladded Sheet Metal

7_ICMPC_94 326 Regular Shivaraj S. Vadgeri

7_ICMPC_95 329 Regular Jyoti Mukhopadhyay

7_ICMPC_96 330 Regular S.Palit Sagar

7_ICMPC_97 333 Regular Pradeep Khanna

7_ICMPC_98 334 Regular Hodbe G.A.

7_ICMPC_99 335 Regular Santanu Das

7_ICMPC_100 338 Regular Sovan Bhowmick

7_ICMPC_101 344 Regular Navneet Khanna

7_ICMPC_102 345 Regular A.AnithaLakshmi

7_ICMPC_103 350 Regular Anurag Vaidyanathan

7_ICMPC_104 351 Regular Akhil Bhardwaj

7_ICMPC_105 354 Regular M. Ravi Sankar

7_ICMPC_106 357 Regular M Manohar

Static and Fatigue Analysis of Lathe spindle for Maximum

Cutting Force

A Review of Super plastic forming

Creep Damage Evaluation In P92 Steel Using Second Harmonic Of

High Power Ultrasonic Signal

Development of Mathematical Models for Prediction and

Control of Weld Bead Dimensions in MIG Welding of

Stainless Steel 409M

Design And Simulation Of LM 25 Sand Casting For Defect

Minimization

Exploring Grind Ability Of Inconel 718 Using Small

Quantity Cooling And Lubrication Technique

Experimental study of plasma arc cutting of AISI 304 stainless steel

An Experimental Study of Surface Roughness Variation in

End Milling of Super Duplex 2507 Stainless Steel

Prediction of Mechanical properties of Austenitic stainless steel in Superplastic region using

Artificial Neural Network

Deep Drawing of constrained groove pressed EDD steel sheets

Microstructural and SEM analysis on thin sheets of Ti6Al4V alloy subjected to biaxial and uniaxial

tensile tests

Experimental Study of Deflection and Surface Roughness in Thin Wall Machining of Aluminum

Alloy

Performance Prediction of Electric Discharge Machining of

Inconel-718 using Artificial Neural Network

7_ICMPC_107 361 Regular K.Limbadri

7_ICMPC_108 362 Regular Kurra Suresh

7_ICMPC_109 502 Regular D. Rajamani

7_ICMPC_110 505 Regular Karmjit Singh

7_ICMPC_111 507 Regular A. U. Karmarkar

7_ICMPC_112 509 Regular Vootla Ashok Kumar

7_ICMPC_113 510 Regular K.Satish Prakash

7_ICMPC_114 511 Regular

7_ICMPC_115 512 Regular Deepak Kumar

7_ICMPC_116 516 Regular Swapnil Magar

7_ICMPC_117 517 Regular Surabhi Lata

7_ICMPC_118 519 Regular Guru B. Kamalakar

7_ICMPC_119 520 Regular Paresh Panchal

Stress variations of Zircaloy-4 produced from pilgering and

rolling and Johnson Cook Model.

Finite Element Simulations Of Multi Stage Incremental Forming

Process

A Study On Dimensional Accuracy Of Selective Inhibition

Sintered HDPE Parts Using Fuzzy Logic

Modelling and Evaluation of KPIs for the Assessment of

Sustainable Manufacturing: An Extrusion process case study

Fuzzy Logic based decision support systems in variant

production

Comparison Of Process Parameters Influence On

Mechanical And Metallurgical Properties Of Zinc Coating On

Mild Steel & Aluminium During Mechanical Process

Additive Manufacturing Techniques in Manufacturing -An

Overview

Application of Additive Manufacturing technology to an Aerospace component for better

trade-off’s

Kanuparti Vishnu Prashant Reddy

Influence of Yttria on Oxide Dispersion Strengthened (ODS)

Ferritic Steel

Review of the effect of built orientation on mechanical Properties of metal-plastic

composite parts fabricated by Additive Manufacturing

Technique

Development and Investigation of Hybrid Electric Discharge

Machining Electrode Process

Development and Analysis of Human Hand-Arm System Model

for Anti-Vibration Isolators

Outgassing measurement of various activated carbon sorbents

for application in prototype cryopump

7_ICMPC_120 523 Regular Trushal Sardhara

7_ICMPC_121 524 Regular Satyanarayana A

7_ICMPC_122 525 Regular Prudhvi Reddy Gutta

7_ICMPC_123 526 Regular Puneeth Valmiki

7_ICMPC_124 530 Regular Srikanta Routroy

7_ICMPC_125 531 Regular Priyank B. Patel

7_ICMPC_126 532 Regular Ashish Khaira

7_ICMPC_127 538 Regular Dr.G. V. Reddy

7_ICMPC_128 539 Regular JitendraSatpute

7_ICMPC_129 540 Regular Rajendra Chavhan

7_ICMPC_130 546 Regular Diptikanta Das

7_ICMPC_131 550 Regular Prashant K. Jain

7_ICMPC_132 551 Regular Aditya Mohan Alwala

7_ICMPC_133 554 Regular Samir Chakravarti

Design and Development of Automatic Lubrication system for

ATC of CNC

Influence of LASER CMM Process Parameters on

Dimensional Inspection of Standard Spheres

A review on facility layout design of an automated guided vehicle in

flexible manufacturing system

A Study on Simulation Methods for AGV Fleet Size Estimation in a Flexible Manufacturing System

Analysis of Agile Manufacturing Enablers: A Case Study

Application of PSI Methods to Select FDM Process Parameter

for Polylactic Acid

A State of the Art Review of Analytical Hierarchy Process

Training Young Maxillofacial Surgeons or Trainees Using

Additive Manufacturing

Thermal Performance Investigation of Concentrated Solar Collector Using Novel

Aluminium Absorber

Supplier Development Success Factors In Iindian Manufacturing

PracticesHigh speed turning of EN24 steel - a Taguchi based grey relational

approach

Experimental investigations on suitability of polypropylene (PP) and ethylene vinyl acetate (EVA)

in additive manufacturing

Customization of Patient Specific Distraction Device using Additive

Manufacture Technology

A study on solidification of large iron casting in a thin water cooled

copper mould

7_ICMPC_134 558 Regular N D Mehta

7_ICMPC_135 561 Regular

7_ICMPC_136 570 Regular Durga Prasad

7_ICMPC_137 571 Regular Ajay Verma

7_ICMPC_138 572 Regular Rajesh Purohit

7_ICMPC_139 573 Regular Saraswati Rana

7_ICMPC_140 575 Regular

7_ICMPC_141 701 Regular Rupinder Singh

7_ICMPC_142 703 Regular Saurav Datta

7_ICMPC_143 704 Regular

7_ICMPC_144 705 Regular B. Panja

7_ICMPC_145 706 Regular Souvik Das

7_ICMPC_146 708 Regular Mohd Salim Qureshi

7_ICMPC_147 709 Regular K. R. Jagtap

7_ICMPC_148 711 Regular Ajit G. Mohite

Innovative Support System for Casting Defect Analysis – A

Need of Time

Assessment and Treatment Planning in Maxillofacial Surgery by using Additive Manufacturing

Technology

Santosh Kumar malyala

Scheduling of Products for Reconfiguration Effort in

Reconfigurable Manufacturing System

A Computing Methodology for Evaluating Supply Chain

Competitiveness

Exploration of the Hydroforming Process for Manufacturing of Domestic Component by FEA

Application

Removal of Organic pollutant with the use of Rotating

Biological Contactor

Process Capability Comparison of Fused Deposition Modelling for

ABS and Fe-Nylon (6) Feedstock Filaments

Multi-Response Optimization during Electro-Discharge Machining of Super Alloy

Inconel 718: Application of PCA-TOPSIS

Linear &Nonlinear electrical behavior of Energy Harvester

K.Viswanath Allamraju

Study of MRR for EN47 Spring Steel in WEDM

Design of integral sliding mode control for DC-DC converters

Design and implementation of sliding mode control for uncertain

systems

Modeling of Piezoelectric Energy Harvester and Comparative

Performance Study of the Proof Mass for Eigen Frequency

Development of Linear and Non-linear Vehicle Suspension Model

7_ICMPC_149 712 Regular Anirban C. Mitra

7_ICMPC_150 716 Regular N. Subramanyam

7_ICMPC_151 717 Regular TVR Sekhar

7_ICMPC_152 720 Regular

7_ICMPC_153 722 Regular Rahul Basu

7_ICMPC_154 723 Regular

7_ICMPC_155 726 Regular Vimal Babu.U

7_ICMPC_156 727 Regular D Chandra Naik

7_ICMPC_157 728 Regular Surabhi Lata

7_ICMPC_158 732 Regular Renuka Kamdar

7_ICMPC_159 733 Regular Pushkar Jha

7_ICMPC_160 736 Regular B.Koteswararao

7_ICMPC_161 737 Regular P. Bhatt

7_ICMPC_162 741 Regular Aashish Gandigude

Development and Validation of a Simulation Model of Automotive Suspension System using MSC-

ADAMS

Prediction Of Progressive Damage And Failure Analysis Of

Rotorcraft Composite Nose Cowling By Continuum Damage

Mechanics Model

Modeling a Renewable Energy Collector and Prediction in

Different Flow Regimes Using CFD

Multi-quality Response Optimization of Wire EDM for Ni-75 using PCA based Utility

theory

Sachin Ashok Sonawane

Freezing and Sublimation in Porous Media

Multi Criteria Decision Making For Selection Of Material Composition For Powder

Metallurgy Process

Shrikrushna B. Bhosale

Data Preprocessing For Modelling The Audulteration

Detection In Gasoline With Bis

Helicopter Main Rotor Blade Root End under High Velocity

Bird Impact

Effectuation Of Lean Tool “5s” On Materials And Work Space Efficiency In A Copper Wire

Drawing Micro-Scale Industry In India

Labview Based Multi-Agent Approach Towards Restoration In

Smart Grid

Modeling The Dry Sliding Wear Behavior Of Cu-4wt%Ni-Tic Composites Using Response

Surface Methodology

Structural Analysis Of Down The Hole Button Bit With Different

Materials

Parametric Study And Modelling Of Orthogonal Cutting Process For Aisi 4340 And Ti-6al-4v

Alloy

Review Of Rocket Cook-Stove Geometrical Aspects For Its Performance Improvement

7_ICMPC_163 742 Regular Amit Sharma

7_ICMPC_164 743 Regular

7_ICMPC_165 747 Regular Gayatri S. Joshi

7_ICMPC_166 750 Regular S. Mujaheed Khan

7_ICMPC_167 752 Regular Ajay Verma

7_ICMPC_168 753 Regular Kamlesh Pant

7_ICMPC_169 755 Regular Nitin Kotkunde

7_ICMPC_170 758 Regular Abhay Agrawal

7_ICMPC_171 762 Regular

7_ICMPC_172 901 Regular Rahul

7_ICMPC_173 902 Regular Gadde Naveen

7_ICMPC_174 905 Regular Omkar Kulkarni

Multi-Response Optimization Of Al2024/Red Mud Mmc Using Hybrid Taguchi-Gra-Entropy

Optimization Technique

Application Of Regression And Artificial Neural Network

Analysis In Modelling Of Surface Roughness In Hard Turning Of

Aisi 52100 Steel

Uma Maheshwera Reddy Paturi

Modelling And Product Customization Of Pvc Coating

Machine

A Perspective Review On Experimental Investigation And Numerical Modeling Of Electron

Beam Welding Process

Application Of Interpretive Structural Modelling To

Establish Interrelationships Among The Enablers Of Supply

Chain Competitiveness

A Multi Echelon mixed integer linear programming model of a close loop supply chain network

design.

Study of Hot Dformation Behaviour Using

Phenomenological Based Constitutive Model for Austenitic

Stainless Steel 316

Application of jute cloth (natural fibre) to enhance the distillate

output in solar distillation system

Consequence Analysis Of Lpg Storage Tank

Rupesh Kumar Malviya

Optimization Of Electro-Discharge Machining Responses Of Super Alloy Inconel 718: Use

Of Satisfaction Function Approach Combined With

Taguchi Philosophy

Effect Of Process Parameters On Mechanical And Metallurgical

Properties Of Friction Stir Processed Az31mg Alloy

Process Parameter Optimization In Wedm By Grey Wolf

Optimizer

7_ICMPC_175 906 Regular

7_ICMPC_176 907 Regular Diptikanta Das

7_ICMPC_177 910 Regular

7_ICMPC_178 912 Regular Kaushik Kumar

7_ICMPC_179 913 Regular Tushar Y. Badgujar

7_ICMPC_180 915 Regular J.Babu

7_ICMPC_181 916 Regular

7_ICMPC_182 919 Regular B. Siva kumar

7_ICMPC_183 920 Regular G.kartheek

7_ICMPC_184 921 Regular D.Devaiah

7_ICMPC_185 923 Regular

7_ICMPC_186 924 Regular Dr Ruby Mishra

7_ICMPC_187 927 Regular

Optimisation Of Process Parameters Of Electrical Discharge Machining Of

Fabricated Aa 6061/ 10% Al2 O3 Aluminium Based Metal Matrix

Composite

Bhaskar Chandra Kandpal

Optimization Of Machining Parameters And Development Of

Surface Roughness Models During Turning Al-Based Metal

Matrix Composite

Grey-Taguchi Optimization Of Near Dry Edm Process

Parameters On The Surface Roughness

Nimo Singh Khundrakpam

Design And Optimization Of Mixed Flow Pump Impeller

Blades – A ReviewStamping Process Parameter Optimization With Multiple

Regression Analysis ApproachExperimental Studies On Friction

Stir Processing Of Az31 Magnesium Alloy

Parametric Modeling In Drilling Of Die Steels Using Taguchi

Method Based Response Surface Analysis

Stress Analysis And Design Optimization Of A Pressure Vessel Using Ansys Package

Optimization Of Residual Stresses In Hard Turning Of

Super Alloy Inconel 718

Optimal Fsw Process Parameters For Dissimilar Aluminium Alloys

(Aa5083 And Aa6061) Using Taguchi Technique

An Experimental Study On Parametric Optimization For Material Removal Rate And

Surface Roughness On Edm By Using Taguchi Method

Rashed Mustafa Mazarbhuiya

Optimum Design Of Elastic And Flexible Linkages For Motion

And Path Generation

Dynamic Cost Optimization Method Of Concrete Mix Design

Gholam-Reza Tadayonfar

7_ICMPC_188 929 Regular Apurba Pathak

7_ICMPC_189 933 Regular Rishabh Jain

7_ICMPC_190 934 Regular

7_ICMPC_191 938 Regular Chirag G. Dalwadi

7_ICMPC_192 939 Regular Sagar M Baligidad

7_ICMPC_193 940 Regular Asma Perveen

7_ICMPC_194 941 Regular M.V.R.Durga Prasad

7_ICMPC_195 943 Regular B. Ravi Sankar

7_ICMPC_196 944 Regular B. Satyanatayana

7_ICMPC_197 945 Regular Sagar M Baligidad

7_ICMPC_198 946 Regular R Venkata Rao

7_ICMPC_199 947 Regular

Taguchi-Grey Relational Based Multi-Objective Optimization Of

Process Parameters On The Emission And Fuel Consumption Characteristics Of A Vcr Petrol

Engine

Optimization To The Parameters Of Abrasive Flow Machining By

Taguchi Method

Parametric Optimization For Photochemical Machining Of

Copper Using Overall Evaluation Criteria

Sandeep Sitaram Wangikar

Examination Of Mechanical Properties For Dissimilar Friction

Stir Welded Joint Of Al Alloy (Aa-6061) To Pmma (Acrylic)

Taguchi’s Approach: Design Optimization Of Process

Parameters In Selective Inhibition Sintering

Statistical Modeling And Optimization Of Micro Electro

Discharge Machining Of Ti Alloy

Process Parameters Optimization In Friction Stir Welding By

Anova

Multi Objective Optimization Of Cfrp Composite Drilling Using

Ant Colony Algorithm

Optimization Of Controllable Turning Parameters For High

Speed Dry Machining Of A Super Alloy

Rsm Optimization Of Parameters Influencing Mechanical

Properties In Selective Inhibition Sintering

Optimization Of Abrasive Waterjet Machining Process Using Multi-Objective Jaya

Algorithm

Optimization Of Welding Parameters Of Ti 6al 4v

Cruciform Shape Weld Joint To Improve Weld Strength Based On

Taguchi Method

Srinivasa Reddy Vempati

7_ICMPC_200 948 Regular M. Venkata Ramana

7_ICMPC_201 949 Regular Venkatesh Mundada

7_ICMPC_202 950 Regular Dilip Khedekar

7_ICMPC_203 951 Regular R. Venkata Rao

7_ICMPC_204 952 Regular Jashanpreet Singh

7_ICMPC_205 956 Regular Aditya Kumar

7_ICMPC_206 957 Regular Arun J. Kulangara

7_ICMPC_207 960 Regular A. D. Pathak

7_ICMPC_208 961 Regular Sunita Parinam

7_ICMPC_209 965 Regular Basani Satish

7_ICMPC_210 966 Regular Bijaya Bijeta Nayak

Optimization Of Material Removal Rate In Turning Of Aisi

321 Stainless Steel Using Taguchi Methodology

Optimization Of Milling Operations Using Artificial Neural Networks (Ann) And

Simulated Annealing Algorithm (Saa)

Development Of The Cryogenic Processing Cycle For Age

Hardenable Aa7075 Aluminium Alloy And Optimization Of The

Process For Surface Quality Using Gray Relational Analysis

Experimental Investigation And Parameter Optimization Of

Al2o3-40% Tio2 Atmospheric Plasma Spray Coating On Ss316

Steel Substrate

Taguchi’s Approach For Optimization Of Tribo-Resistance

Parameters Forss304

Optimization Of Agglomerated Fluxes In Submerged Arc

Welding

Generation And Optimization Of Lattice Structure On A Spur Gear

Optimization Of Cutting Parameters In Dry Turning Of

Aisi A2 Tool Steel Using Carbide Tool By Taguchi Based Fuzzy

Logics

Optimization Of Optical Parameters For The Design Of

Multilayer Bandpass Filter Using Genetic Algorithm

Hierarchical Parallel Processing For Design Optimization - A

Case Study

Application Of Wpca Based Taguchi Method For Multi-Response Optimization Of

Abrasive Jet Machining Process

7_ICMPC_211 967 Regular Nitesh Kumar

7_ICMPC_212 970 Regular Angshuman Roy

7_ICMPC_213 973 Regular B.Ch.Nookaraju

7_ICMPC_214 983 Regular Navneet Khanna

7_ICMPC_215 990 Regular Navneet Khanna

7_ICMPC_216 993 Regular

7_ICMPC_217 998 Regular

7_ICMPC_218 1015 Regular Anitha D

7_ICMPC_219 1016 Regular Aharwal K R

7_ICMPC_220 1101 Regular Prabhunandan G S

7_ICMPC_221 1102 Regular L. Selvarajan

7_ICMPC_222 1105 Regular Shikhar Goel

Optimization Of Pulsed Nd:Yvo4 Laser Through Transmission

Welding Of Transparent Acrylic And Polycarbonate

Optimization Of Pulsed Nd:Yvo4 Laser Marking Of Aisi 304

Stainless Steel Using Response Surface Methodology

Optimization of Process Parameters of Helical Grooved

Heat pipe Using Response Surface Methodology

Optimization and analysis of surface roughness for INVAR-36

in end milling operations

Multi-objective optimization of surface parameters such as concavity, straightness and roughnessin milling process

Voltage Optimization of Piezoelectric Circular Transducer

by Taguchi and ANOVA Approches

K.Viswanath Allamraju

Optimization Of Machining Parameter In Turning Inconel 625

Satyanarayana Kosaraju

Airfoil Shape Optimization Using Cfd And Parametrization

Methods

Optimization of Material Removal Rate and Surface

Roughness in EDM Machining of Metal Matrix Composite using

Genetic Algorithm

Dynamic Analysis Of A Steam Turbine With Numerical

Approach

Experimental Analysis Of En 19 Alloy Material On Edm For

Improving Geometrical Errors Using Copper Pentagon Shaped

Electrode

Effect Of Process Parameters On Mechanical And Metallurgical

Properties Of Friction Stir Processed Az31mg Alloy

7_ICMPC_223 1107 Regular Sambhrant Srivastava

7_ICMPC_224 1108 Regular K.D.Mohapatra

7_ICMPC_225 1109 Regular W.Shivaraj Singh

7_ICMPC_226 1110 Regular Saurav Datta

7_ICMPC_227 1113 Regular

7_ICMPC_228 1115 Regular

7_ICMPC_229 1116 Regular Radha Krishna Lal

7_ICMPC_230 1118 Regular Ramanjaneyulu V

7_ICMPC_231 1120 Regular Pradeep Khanna

7_ICMPC_232 1121 Regular

7_ICMPC_233 1122 Regular N.K.Kharate

7_ICMPC_234 1124 Regular Ravneet Singh

7_ICMPC_235 1125 Regular K.Satyanarayana

7_ICMPC_236 1126 Regular Rajesh Sharma

Design Validation & Stress Analysis Of Mixed Flow Pump Impeller Blades Under Applied

Uniformly Distributed And Uniformly Varying Loads.

Modeling And Analysis Of Wire Edm In A Gear Cutting Process

For A 2d ModelDesign And Analysis Of Shock

Absorber: A Review

Electro-Discharge Machining Of Inconel 718 Using Square Cross

Sectioned Copper Tool Electrode: Studies On Topography And

Metallurgical Features Of The Edmed Work Surface

On Electro-Discharge Machining Of Inconel 718 Super Alloys: An

Experimental Investigation

Bighnesh Kumar Sahu

Nonlinear behavior of quarter locomotive suspension system

K.Viswanath Allamraju

Residual Stress Analysis Of Triangular Cross-Sectioned Bar

Of Linear Work- Hardening Materials Under Torsional

Loading

Analysis Of Composite Rocket Motor Case Using Finite Element

Method

Residual Stress Analysis In Mig Welding Of Stainless Steel 409m

Fatigue Analysis Of Sundry I.C Engine Connecting Rods

S.V.Uma Maheswara Rao

Effect Of Material Properties On Disc Brakesquealand

Performance Using Fem Andema Approach.

Study Of High-Temperature Corrosion Behavior Of D-Gun

Spray Coatings On Astm-Sa213, T-11 Steel In Molten Salt

Environment

Quasi-Dynamic And Thermal Analysis Of A Diesel Engine’s

Piston Under Variable Compression Ratios

Failure Analysis Of Variable Inlet Guide Vane And Compressor

Rotor Blade Of Helicopter Engine

7_ICMPC_237 1128 Regular

7_ICMPC_238 1129 Regular Sanjay Kumar

7_ICMPC_239 1130 Regular

7_ICMPC_240 1132 Regular Ratnakar Das

7_ICMPC_241 1135 Regular Anirban Mitra

7_ICMPC_242 1138 Regular Sushant K. Rawal

7_ICMPC_243 1140 Regular

7_ICMPC_244 1141 Regular Dhrupal J. Kotadiya

7_ICMPC_245 1142 Regular Ranjan Kumar Mishra

7_ICMPC_246 1143 Regular

Anirban C. Mitra

7_ICMPC_247 1144 RegularIbrar Jahan M.A

7_ICMPC_248 1147 Regular

Dr Ruby Mishra

7_ICMPC_249 1149 Thermal Analysis Of Heat Sink Regular

Syeda Romana

Design And Analysis Of Bolted Joint For Rocket Motor Casing

Mr.Kondru Nagendra Babu

Statistical And Frequency Analysis Of Acoustic Signals For

Condition Monitoring Of Ball Bearing

Analysis Of An Anaerobic Digester Using Numerical And

Experimental Method For Biogas Production

Thokchom Subhaschandra Singh

Finite Element Analysis And Experimental Study On Forward,

Backward And Forward-Backward Multi-Hole Extrusion

Process

Large Amplitude Forced Vibration Analysis Of An Axially

Functionally Graded Tapered Beam Resting On Elastic

Foundation

Fea Analysis Of Zirconium Nitride Coatings Prepared By Rf

Magnetron Sputtering: Cfd Approach

Thermal Buckling Analysis Of Laminated Composite Plate With

Square/Rectangular, Elliptical/Circular Cutout

A. Lakshmi narayanaa

Parametric Analysis Of Process Parameter For Laser Cutting

Process On Ss-304

A Review On Fracture Mechanics In Piezoelectric Structures

Experimental Vibration Analysis Of Isolator Material On Hand-Handle Interface For Chopsaw

Machine

Analysis Of Fbg Sensor For Accurate Pressure Sensing With

Improved Sensitivity

Structural And Dynamic Analysis Of Optimized Four Bar Mechanism Considering

Counterweight In Coupler Link

7_ICMPC_250 1150 Regular Pujan Sarkar

7_ICMPC_251 1151 Finite Element Modeling of She Regular H. Eskandari-Naddaf

7_ICMPC_252 1155 Sensitivity Analysis of Reinfo Regular

7_ICMPC_253 1158The Mechanical Properties of Dif

Regular Ravi Butola

7_ICMPC_254 1159 Regular Puja Basu Chaudhuri

7_ICMPC_255 1163 Regular N.D.Misal

7_ICMPC_256 1164 Regular Shahid Husain

7_ICMPC_257 1166 Regular Pankaj Dhatrak

7_ICMPC_258 1167 Regular Dr.Vivek Hegde

7_ICMPC_259 1170 Regular Pradip D.Haridas

7_ICMPC_260 1171 Regular Anil Kumar S

7_ICMPC_261 1172 Regular G. Srinivasa Gupta

7_ICMPC_262 1173 Regular A.C.Mitra

7_ICMPC_263 1176 Regular

Mechanical and Tribological Characteristics of Aluminium

Powder filled Glass Epoxy Composites

Hamid Eskandari-Naddaf

Free vibration analysis of antisymmetric angle ply

laminated composite stiffened hyper shell with cut out

Multi-Objective Optimization of Photochemical machining of

Inconel 601 using Grey Relational Analysis

Structural Properties and Williamson-Hall Analysis of Mn

Doped SmFeO3

Finite Element Analysis and Experimental Investigations on

Stress Distribution of Dental Implants around Implant-Bone

Interface

Analysis Of Gutta Percha A Dental Root Filling Material For

Impact

Experimental analysis of thin walled composite rotor blade model from structural health

monitoring aspect

Effect of Proximity Hole on Induced Residual Stresses during

Cold Expansion of Adjacent Holes

Micro Stress Evaluation and Analysis in FRP Composites for

Rocket Motor Casing

Experimental Design, Sensitivity Analysis of Steering Geometry

and Suspension Parameters

Microstructural, Mechanical And Metallurgical Analysis of Al Interlayer Coating On Mg-Al

Alloy Using Diffusion Bonding

R. J. Golden Renjith Nimal

7_ICMPC_264 1177 Regular Radha Krishna Lal

7_ICMPC_265 1178 Regular Satish Kumar Verma

7_ICMPC_266 1180 Regular Radha Krishna Lal

7_ICMPC_267 1181 Regular Radha Krishna Lal

7_ICMPC_268 1182 Regular Anil Shinde

7_ICMPC_269 1186 Regular Navneet Khanna

7_ICMPC_270 1187 Regular V.V.VenuMadhav

7_ICMPC_271 1189 Regular Binoy Kumar Baroi

7_ICMPC_272 1192 Regular Vikas Kannojiya

7_ICMPC_273 1193 Regular Eswara Kumar.A

7_ICMPC_274 1195 Regular Chandramouli S.

7_ICMPC_275 1196 Regular Sachit T S

7_ICMPC_276 1200 Regular

Residual Stress analysis of Equilateral Triangular Sectioned

bar of Non-Linear Work- Hardening Materials under

Torsional Loading

Analysis of Filling in Thin Section by FEM Based

Simulation for LM6 Material

Residual Stress analysis in Torsion of Elliptical Sectioned

bar of Non-Linear Work- Hardening Materials

Residual Stress analysis of Triangular Sectioned bar of Non-

Linear Work- Hardening Materials under Torsional

Loading

Numerical Analysis of Deterministic Micro-Textures on

the Performance of Hydrodynamic Journal Bearing

Study the effect of process parameters in plasma arc cutting

on Quard-400 material using analysis of variance

Thermo-Elastic Fracture Analysis of Angle-ply laminates

Electric Discharge Machining of Titanium Grade 2 Alloy and its

Parametric Study

Numerical Analysis of Solid Particle Erosion in Pipe Elbow

Static and Dynamic Analysis of Pressure Vessels With Various

Stiffeners

Experimental investigation of EDM Process parameters in

Machining of 17-4 PH Steel using Taguchi Method

Thermal analysis of Cr2O3 coated diesel engine piston using

FEA

Facile Synthesis and thermal analysis of Antimony Telluride

Nanostructures

Vasudeva Rao Veeredhi

7_ICMPC_277 1202 Regular Radha Krishna Lal

7_ICMPC_278 1203 Regular Nikul D. Patel

7_ICMPC_279 1205 Regular Pranshu Gehlot

7_ICMPC_280 1207 Regular Ashwin Chopane

7_ICMPC_281 1210 Regular

7_ICMPC_282 1211 Regular S Debnath

7_ICMPC_283 1212 Regular Pavan G. Chaudhari

7_ICMPC_284 1215 Regular Suswagata Poria

7_ICMPC_285 1217 Regular Premkumar Manda

7_ICMPC_286 1218 Regular Ramesh Rudrapati

7_ICMPC_287 1220 Regular P.S.S. Murthy

7_ICMPC_288 1221 Regular

7_ICMPC_289 1225 Regular Talluri Srinivasa Rao

Study and Analysis of Meshfree Methods in elastic-plastic Torsion

Problem

CFD Analysis of Scavenging Process for Dome Headed Piston

in Two-Stroke Cycle Engine

Harmonic analysis of Stiffened Functionally Graded Plate using

FEM

Design and analysis of plastic gears in rack and pinion steering

system for formula supra car

Analysis and comparison of performance and emissions of compression ignition engine

fuelled with diesel and different bio-fuels blended with Methanol

Dr. Hiregoudar Yerrennagoudaru

A Study Of Multiple Regression Analysis On Die Sinking Edm

Machining Of Ex-Situ Developed Al-4.5cu-Sic Composite

Evaluation of MIG welding process parameter using

Activated Flux on SS316L by AHP-MOORA method

Design of Experiments Analysis of Wear Behavior of Stir Cast Al-

TiB2 Composite in Lubricated Condition

Failure Analysis of Cooler Fan Drive Gear System of Helicopter

Experiments, analysis and parametric optimization of

cylindrical traverse cut grinding of aluminium bronze

Kinematic Analysis of Spatial Mechanism by Generated

Surfaces

Free vibration analysis of Stiffened Laminated Plate using

FEM

Aishwary Singh Rajawat

Enhancement of Lift-Drag characteristics of NACA 0012

7_ICMPC_290 1231 Regular Mohd. Zahid Ansari

7_ICMPC_291 1232 Regular Dwaipayan De

7_ICMPC_292 1234 Regular

7_ICMPC_293 1237 Regular P. D. Ingle

7_ICMPC_294 1238 Regular Dr. S.K. Dhakad

7_ICMPC_295 1239 Regular

7_ICMPC_296 1242 Regular S.Jai Krishna Sahith

7_ICMPC_297 1246 Regular

7_ICMPC_298 1251 Regular J.Venkata suresh

7_ICMPC_299 1252 Regular S Banumathy

7_ICMPC_300 1257 Regular S.RaviSekhar

7_ICMPC_301 1304 Regular L. Selvarajan

Finite element analysis of AA1100 elasto-plastic behaviour

using Johnson-Cook model

Analysis of Machining Parameters for Wire Cut

Electrical Discharge Machining of Pure Titanium Using Response

Surface Methodology

Principal component analysis to optimize the ECM parameters of

Aluminium alloy

Dinesh Kumar Kasdekar

A Literature Survey Of Methods To Study And Analyze The

Gating System Design For Its Effect On Casting Quality

Stress Intensity Factor (SIF) analysis on the Pressurized Base

Weld Component (PBWC) Materials a Review

Prediction of surface roughness and MRR in grinding process on Inconel 800 alloy using neural

networks and ANFIS

N Sudheer Kumar Varma

Design and Surge Study of Salaya Mathura Pipeline for Higher

Throughput of Crude Oil Transportation

Effect of Temperature on Tensile flow behaviour of Nimonic C-263

alloy

Koteswara Rao.V.Rajulapati

CFD Analysis of Copper Closed Loop Pulsating Heat pipe

The Effect of Nb addition on microstructure, oxidation

behavior and strength of some g-TiAl alloys

Effect Of Tool Rotational Speed On Friction Stir Spot Welded

Aa5052 – H38 Aluminum Alloy

A Review Paper on EDM Parameter of Composite material and Industrial Demand Material

Machining

7_ICMPC_302 1305 Regular Pulakesh Chetia

7_ICMPC_303 1307 Regular Ramesh Gupta Burela

7_ICMPC_304 1308 Regular Kaushik Kumar

7_ICMPC_305 1310 Regular Dr.S.Geetha

7_ICMPC_306 1313 Regular Prashant Jindal

7_ICMPC_307 1316 Regular M.Indra Reddy

7_ICMPC_308 1317 Regular Mohit Sood

7_ICMPC_309 1319 Regular NabanitaBanik

7_ICMPC_310 1320 Regular

7_ICMPC_311 1323 Regular Mohamed Zakaulla

7_ICMPC_312 1329 Regular L. Selvarajan

7_ICMPC_313 1333 Regular Archana Yadav

Parametric Optimization in Drilling of Bamboo/Basalt

Hybrid Composite

A review of recent research on multifunctional composite

materials and structures with their applications

Suitability of Composite Material for Orthotic Calipers –

Tribological Study

Fibre Reinforced Lightweight Composite Reinforced with

Geogrid for Wall Panels

Effect of MWCNTs on damping behaviour of Polyurethane based

nano-composites

Comparative Evaluation on Mechanical Properties of Jute, Pineapple leaf fiber and Glass

fiber Reinforced Composites with Polyester and Epoxy Resin

Matrices

Tensile properties of sisal fiber / recycled polyethylene (high

density) composite:Effect of fiber chemical treatment

An experimental study on the dominance of process parameters

on mechanical properties for making a fire retardant bamboo fiber composite with the help of

Taguchi experimental design

Wire electrical discharge machining of MWCNT filled

alumina composites

Meinam Annebushan Singh

Tribological Characteristics of Multiwalled Carbon Nanotubes

And Boron Carbide Particles Reinforced Al2024 Matrix

Composites

A Review on Less Tool Wear Rate and Improving Surface

Quality of Conductive Ceramic Composites by Spark EDM

Flexural and impact characterization of wheat flour reinforced epoxy composites

treated with saline water

7_ICMPC_314 1334 Regular Sachit T S

7_ICMPC_315 1335 Regular A. Lakshmi narayana

7_ICMPC_316 1336 Regular Surabhi Lata

7_ICMPC_317 1337 Regular Gurinder Singh Brar

7_ICMPC_318 1338 Regular Pankaj Charan Jena

7_ICMPC_319 1342 Regular Sachit T. S.

7_ICMPC_320 1343 Regular N. V. Subba Raju

7_ICMPC_321 1344 Regular K.Naveenkumar

7_ICMPC_322 1348 Regular BatluriTilak Chandra

7_ICMPC_323 1350 Regular

7_ICMPC_324 1351 Regular Vemu Vara Prasad

7_ICMPC_325 1356 Regular Diptikanta Das

A review on effect of powder metallurgy process on mechanical

and tribological properties of Hybrid nano composites

Effect Of Volume Fraction On The Thermal Buckling Analysis Of Laminated Composite Plate

With Square/Rectangular Cutout

GA based Optimization of Process Parameters for Drilling

on Al-MgO Metal Matrix Composite

Characterization and Investigation of Mechanical

Properties of Composite Materials used for Leaf Spring

Free Vibration Analysis of Short Bamboo Fiberbased Polymer Composite Beam Structure

Effect of Particle Size on Mechanical and Tribological Behavior of LM4/SiCp Based

MMC

Study on Thermo physical properties of Hemp, Jute and

Glass fiber reinforced polyester composites

Machining Characteristics Of Al /Ticp/Gr Hybrid Composites

Effect Of Heat Treatmenton Dry Sand Abrasive Wear Behavior Of

Al7075-Albite Particulate Composites

Performance Analysis of Ply Orientation in Composite

Laminates

N.B.V. Lakshmi Kumari

A Review on Reinforcement of Basalt and Aramid (Kevlar 129)

fibers

Turning performance of Al 7075/SiCp MMC and multi-response optimization using

WPCA and Taguchi approach

7_ICMPC_326 1360 Regular Pavithra H S

7_ICMPC_327 1361 Regular A. Malar Retna

7_ICMPC_328 1362 Regular Surabhi Lata

7_ICMPC_329 1363 Regular Rakesh Potluri

7_ICMPC_330 1366 Regular M. K. Gupta

7_ICMPC_331 1368 Regular M RaviKumar

7_ICMPC_332 1369 Regular Kanishka Jha

7_ICMPC_333 1370 Regular

7_ICMPC_334 1371 Regular Shahadev B. Ubale

7_ICMPC_335 1372 Regular

7_ICMPC_336 1373 Regular Prof C.V. Mohan Rao

7_ICMPC_337 1377 Regular

Study on Microstructure and Mechanical Properties of

Al/SiO2/C hybrid metal matrix composite, with the Influence of

Chills

A new insight of degradation and stability performance of

polyurethane and its composites

An Experimental Study and Analysis of the Mechanical

Properties of Titanium Dioxide Reinforced Aluminium (AA

5051) Composite

Effect of Silicon Carbide Particles Embedmenton the properties of

Kevlar Fiber ReinforcedPolymer Composites

Flexural and Dynamic Mechanical Analysis (DMA) of Polylactic Acid (PLA) Coated

Sisal Fibre Reinforced Polyester Composite

Mechanical and Wear behavior of Al7075/Al2O3/SiC Hybrid

Composite

A Study on Erosion and Mechanical Behavior of Jute/E-

Glass Hybrid Composite

Effect of fiber loading on Thermal properties of Banana and

Pineapple leaf fiber Reinforced Polyester Composites

P. V. Ch. R. K. Santosh

Artificial Neural Network based Modelling of Wire Electrical

Discharge Machining onTungsten-Copper Composite

Mechanical and electrical behaviour of developed copper

based hybrid composites

Rakesh Kumar Gautam

Design and Analysis of Leaf Spring using Various Composites

– An Overview

Mechanical and tribological properties of plastically deformed

copper metal matrix nano composite

Rakesh Kumar Gautam

7_ICMPC_338 1378 Regular Suresh. R

7_ICMPC_339 1380 Regular N. Sateesh

7_ICMPC_340 1383 Regular S.B. Potdar

7_ICMPC_341 1384 Regular Rakesh Potluri

7_ICMPC_342 1385 Regular Manish Shukla

7_ICMPC_343 1389 Regular P. Vijaya Kumar Raju

7_ICMPC_344 1393 Regular P Shiva Shanker

7_ICMPC_345 1397 Regular Rakesh Potluri

7_ICMPC_346 1398 Regular K.Vijaya Bhaskar

7_ICMPC_347 1400 Regular M.Arif Siddiqui

7_ICMPC_348 1401 Regular Mohd. Zahid Ansari

7_ICMPC_349 1402 Regular Amit Chauhan

7_ICMPC_350 1406 Regular Hari Vasudevan

Abrasive Jet Machining for Micro-hole Drilling on Glass and

GFRP Composites

Thermal analysis of Carbon Composites Subjected to Various

Atmospheric Conditions

Effect of Changes in Fiber Orientations on Modal Density of

Fiberglass Composite Plates

Analytical Model Application for Prediction of Mechanical

Properties of Natural Fiber Reinforced Composites

Characteristic Behaviour of Aluminium Metal Matrix Composites: A Review

Mechanical deformation behavior of aged Al-Cu alloys and

innovative Al-Cu metal matrix composite fabricated using stir-

casting technique

A review on properties of conventional and metal matrix

composite materials in manufacturing of disc brake

Effect of Stacking Sequence on the Mechanical & Thermal

Properties of Hybrid Laminates

Effect of Reinforcement and Wear Parameters on Dry Sliding Wear of Aluminum Composites-

A Review

Raw natural fiber reinforced polystyrene composites: Effect of

fiber size and loading

Study On Mechanical Properties Of Epoxy And Nylon/Epoxy

Composite

Fabrication Methods Of Particulate Reinforced

Aluminium Metal Matrix Composite-A Review

Optimization Of Multi-Performance Characteristics In

The Turning Of Gfrp(E) Composites Using Principle

Component Analysis Combined With Grey Relational Analysis

7_ICMPC_351 1411 Regular Rajesh Purohit

7_ICMPC_352 1422 Regular Pushyamitra Mishra

7_ICMPC_353 1423 Regular R. S. Rana

7_ICMPC_354 1427 Regular Ravi Kumar P

7_ICMPC_355 1501 Regular D. Rajamani

7_ICMPC_356 1504 Regular Gopal Nandan

7_ICMPC_357 1505 Regular Bijaya Bijeta Nayak

7_ICMPC_358 1506 Regular A.Naresh Kumar

7_ICMPC_359 1508 Regular

7_ICMPC_360 1510 Regular Umasankar Das

7_ICMPC_361 1511 Regular Amit kumar

7_ICMPC_362 1513 Regular

7_ICMPC_363 1515 Regular

Fabrication of magnesium matrix composites using powder

metallurgy process and testing of properties.

Effect Of Rice Husk Ash Reinforcements On Mechanical Properties Of Aluminium Alloy

(Lm6) Matrix Composites

Synthesis & Analysis Of Mechanical Properties Of

LM24/B4C Particulate Composites

Linear Buckling Analysis And Comparative Study Of Un-

Stiffened And Stiffened Composite Plate

Fuzzy Logic-Based Expert System For Prediction Of Wear

Rate In Selective Inhibition Sintered Hdpe Parts

Impact Assessment Of Ethanol As Fuel For Engine Operation

An Intelligent Approach For Prediction Of Angular Error In Taper Cutting Using Wire-Edm

An Experimental Investigation On Performance And Emissions

Of A Compression-Ignition Engine With Lemon-Peel Oil &

Diesel Blends Using Exhaust-Gas Recirculation

Advanced Path Simulation Of A 5r Robotic Arm For Ct Guided

Medical Procedures

Shah Shubham Kamlesh

Effect Of Tool Rotational Speed On Temperature And Impact

Strength Of Friction Stir Welded Joint Of Two Dissimilar

Aluminum Alloys

Investigation Of Powder Mixed Edm Process Parameters For

Machining Inconel Alloy Using Response Surface Methodology

Study On Forms Of Activated Carbon Related To Application In

Cryosorptioncryopump

Samiran Shanti Mukherjee

Effect Of Air Entraining Admixture On Concrete Under Temperature Changes In Freeze

And Thaw Cycles

Gholam-Reza Tadayonfar

7_ICMPC_364 1519 Regular

7_ICMPC_365 1521 Regular

7_ICMPC_366 1525 Regular

7_ICMPC_367 1526 Regular Rajesh Choudhary

7_ICMPC_368 1530 Regular Dipesh Popli

7_ICMPC_369 1531 Regular N. Yadaiah

7_ICMPC_370 1532 Regular Kulwinder Singh

7_ICMPC_371 1533 Regular Hemant Kumar

7_ICMPC_372 1536 Regular Amit L Sharma

7_ICMPC_373 1540 Regular Surabhi Lata

7_ICMPC_374 1541 Regular N. Joshi

Mechanistic Studies On Degradation In Sliding Wear Behavior Of Carburized Aisi 8620 Steel At 100°C Under

Unlubricated Conditions

KG.Thirugnanasambantham

Common Rail Twin Cylinder Diesel Engine Performance And Emission Running On Vegetable

Oils Blended With Ethanol

Dr. Hiregoudar Yerrennagoudaru

Experimental Study On Performance And Emissions Of A

Turbochrged Diesel Engine Fuelled With Diesel And

Vegetable Oils Blended With Ethanol

Dr. Hiregoudar Yerrennagoudaru

Effects Of Process Parameters On The Performance Of Electrical Discharge Machining Of Aisi M42 High Speed Tool Steel

Alloy

A Chipping Reduction Approach In Rotary Ultrasonic Machining

Of Advance Ceramic

A Perspective Review On Estimation Of Keyhole Profile During Plasma Arc Welding

Process

The Effect Of Lanthanum On Microstructure & Mechanical Properties Of Stir Casted Mg

Alloy

Hvof Sprayed Wc Based Cermet Coating For Mitigation Of

Cavitation, Erosion & Abrasion In Hydro Turbine Blade

Design And Deposition Of Single And Multilayer Antireflection Coatings Of Glass Substrate

Using Electron Beam Deposition

Redefining The Structure Of Uplifting Mechanism Of Tool On

A Four Way Tool Post

Experimental Investigation On Surface Quality And Dimensional

Accuracy During Curvilinear Thin-Wall Machining

7_ICMPC_375 1544 Regular S.Bhanu Teja

7_ICMPC_376 1548 Regular Alok Singh

7_ICMPC_377 1704 Regular V. J. Pillewan

7_ICMPC_378 1705 Regular N. Sudheer Kumar

7_ICMPC_379 1708 Regular Naseema

7_ICMPC_380 1710 Regular G.G.Sozhamannan

7_ICMPC_381 1711 Regular Rajeev K. Dang

7_ICMPC_382 1715 Regular Surabhi Lata

7_ICMPC_383 1716 Regular TVR Sekhar

7_ICMPC_384 1720 Regular SVSS Srinivas Raju

7_ICMPC_385 1721 Regular Amarnadh S. V

7_ICMPC_386 1722 Regular T.J.Sasikala

7_ICMPC_387 1723 Regular Surabhi Lata

Experimental Investigation On The Performance, Emission and

Combustion Characteristics Of DI Diesel Engine With Linseed

Methyl Ester Along With Methanol Carburization

Effect of Heat Treatment on Mechanical Behaviour of Fly ash Reinforced Al-Si Composite - A

Review

Carbon To Carbon Nanotubes Synthesis Process: An

Experimental And Numerical Study

Effect Of Heat Treatment & Machining Process For

Deposition Of Al2o3 Nano Particles On Steel.

Heat Enhancement Of Heat Exchanger Using Aluminium

Oxide(Al2o3),Copper Oxide(Cuo)Nano Fluids With

Different Concentrations

Effect Of Applied Load On The Wear Performance Of 6061 Al/

Nano Ticp/ Gr Hybrid Composites

Condition Based Maintenance Of Bearings And Gears For Fault

Detection – Areview

Investigation Of Properties Of Aluminum Based Nanocomposite

Reinforced With Biologically Synthesized Silver Nanoparticles

Investigations On Viscosity And Thermal Conductivity Of Cobalt

Oxide- Water Nano Fluid

Design And Fabrication Of A System For Harnessing Energy

From Road TrafficOn The Evaporation Of Fine Hydrophobic Camphor Soot

Mixed Water

Influence Of Fibre Content On The Degradation Of Punnal Oil

Based Biopolyester Resin

Green Chemistry Based Synthesis Of Silver Nanoparticles From

Floral Extract Of Nelumbo Nucifera

7_ICMPC_388 1726 Regular S. Gokul Raj

7_ICMPC_389 1728 Regular

7_ICMPC_390 1730 Regular A. Malar Retna

7_ICMPC_391 1731 Regular Vandana Kaler

7_ICMPC_392 1735 Regular Manjeet kumari

7_ICMPC_393 1736 Regular Kamal Bera

7_ICMPC_394 1740 Regular Sushil Kumar Singh

7_ICMPC_395 1741 Regular V. Kumar

7_ICMPC_396 1758 Regular Sachindra J. Doshi

7_ICMPC_397 1763 Regular Ved Prakash Sharma

7_ICMPC_398 1768 Regular Pravin Kumar

7_ICMPC_399 1773 Regular Neha Khatri

Tailoring The Phase, Microstructure And Magnetic Properties Of Nanocrystalline

Cobalt Ferrite

Investigation And Assessment Of Performance And Emissions Of

An Ic Engine Fuelled With Diesel And Different Bio-Fuels Blended

With Ethanol

Hiregoudar Yerrennagoudaru

Stearic Acid Modified Casein Based Nanocomposites With Improved Mechanical And

Thermal Properties

Development Of Tio2/Pva Nanocomposites For Application

In Solar Cells

Unsteady Mhd Chemically Reacting Mixed Convection Nano-Fluids Flow Past An

Inclined Pours Stretching Sheet With Slip Effect And Variable Thermal Radiation And Heat

Source

Investigation Of Structural And Electrical Properties Of Zns And

Mn Doped Zns Nanoparticle

Improving Tensile And Flexural Properties Of Sio2-Epoxy Polymer Nanocomposite

Investigation Of Micro/Nano Scale Particle Generated By

Airspray Electrohydrodynamic Atomization (Ehda) Process

Challenges In Fusion Welding Of Body In White

Advance Applications Of Nanomaterials: A Review

Review Paper On Ecm, Pecm And Ultrasonic Assisted Pecm

Experimental And Simulation Study Of Nanometric Surface Roughness Generated During

Magnetorheological Finishing Of Silicon

7_ICMPC_400 1774 Regular Akshat Patil

Effect of Carbon Nanotube on Mechanical Properties of Hybrid

Polymer Matrix Nano Composites at Different Weight

Percentages

First Author Name Corresponding Author mailing address

Satyajeet Kumar 0 1 6

Diptikanta Das 0 2 7

Diptikanta Das 0 3 7

Rajneesh Verma 0 4 8

Sanghamitra Debta 0 5 10

Ch.Hima Gireesh 0 6 9

0 7 10

Himanshu Bisaria 0 8 9

Jatinder Kumar Ratan 0 9 12

No. of supplementary files

Order of appearance in

the special issue

No. of pps (Accepted

article)

Department of Mechanical Engineering Krishna Engineering College Ghaziabad 201007,India

School of Mechanical Engineering, KIIT University, Bhubaneswar-751024, India

School of Mechanical Engineering, KIIT University, Bhubaneswar-751024, India

Department of Mechanical Engineering, Motilal Nehru National Institute of Technology

Allahabad, Allahabad - 211004, India

Department of Mechanical Engineering,Birla Institute of Technology, Mesra, Ranchi,

835215, India

Department of Mechanical Engineering, G.V.P School of Engineering, Technical Campus ,

Gayatri Vidya Parishad College for Degree & P.G.Courses(A),Visakhapatnam-530045, India.

Arkadeb Mukhopadhyay

Department of Mechanical Engineering, Jadavpur University, Kolkata – 700032, India

Department of Mechanical Engineering, Motilal Nehru National Institute of Technology

Allahabad, Allahabad 211004, IndiaDepartment of Chemical Engineering, Dr B R Ambedkar National Institute of Technology,

Jalandhar-144011, Punjab, India

F9
Enter the first author's full name.
G9
Enter the number of electronic files associated to content that will appear online only, i.e. the content will not appear in the printed version of the accepted manuscript. If the manuscript does not include any such files, enter "0".
H9
Elsevier: Enter the number that represents the order in which the manuscripts should appear in the special issue. If the first listed mansucript should appear as the 3rd artilcle in the issue, enter a 3 here. If you do not have a preference, please enter N/A
I9
Enter the mailing address of the corresponding author.
J9
Enter the number of pages of the accepted manuscript. IMPORTANT: In your count, do not include pages on which only figures exist.

Sudip Kundu 0 10 11

S. Nalini Jayanthi 0 11 8

N.Bhuvaneswari 0 12 11

Satyajeet Kumar 0 13 7

Jatin Vadhera 0 14 7

J. Mishra 0 15 7

Neelesh Singh 0 16 10

B.G. Sangeetha 0 17 6

Chethan.k.n 0 18 11

Jaydeep M. Kapopara 0 19 6

0 20 10

M Shivachander 0 21 6

Department of Mechanical Engineering, Indian Institute of Technology (ISM), Dhanbad,

826004, India

Department of Physics, KCG College of Technology, Chennai, India

Assistant Professor, KCG College of Technology,Chennai

Assistant Professor,Department of Mechanical Engineering ,Krishna Engineering Colege ,Ghaziabad-21007,India

Department of Mechanical Engineering, Amity University Uttar Pradesh, Noida

Institute for Plasma Research, Bhat, Gandhinagar-382421, India

School of Mechanical Engineering, KIIT University, Bhubaneswar, Odisha, India

Department of Physics,Dayananda Sagar College of Engineering, Bangalore 560 078,

India

Department of Aeronautical & Automobile Engineering, Manipal Institute of Technology,

Manipal University, 576104, Karnataka, INDIA

Department of Mechanical Engineering,Alpha College of Engineering & Technology, Khatraj-

382721, Gujarat, India.

Hamid Eskandari-Naddaf

Department of Civil Engineering, Hakim Sabzevari University, Sabzevar, Iran

Department of Mechanical Engineering, SR Engineering College, Warangal, T.S., India.

Sakuntala Nahak 0 22 8

Vemu Vara Prasad 0 23 5

Tanmay Agrawal 0 24 8

Tanmay Jain 0 25 6

Rajat Upadhyaya 0 26 7

Mir Irfan Ul Haq 0 27 8

Shubham Srivastava 0 28 8

0 29 10

K. Buschaiah 0 30 9

Radha Krishna Lal 0 31 8

Anoopnath P. R 0 32 6

Eswara Kumar A 0 33 8

0 34 9

Department of Mechanical Engineering, National Institute of Science and Technology,

Berhampur-761008, India

Assistant Professor, UCEK (A), JNTUK, Kakinada-533003, India

Department of Mechanical Engineering, Amity University Uttar Pradesh, Noida

Department of Mechanical & Automation Engineering, Amity School of Engineering,

Amity University, Noida, Uttar Pradesh, India

Department of Foundry Technology,National Institute of Foundry and Forge

Technology,Ranchi-834003,India

Department of Mechanical Engineering, Shri Mata Vaishno Devi University, Katra, Jammu

& Kashmir, India, 182320

Department of Mechanical Engineering, Bundelkhand Institute of Engineering and

Technology, Jhansi, 284128, India

Sudeep Kumar Pradhan

Assistant Professor, Mechanical Engineering Department, Birla Institute of Technology &

Science Pilani, Pilani Campus (Rajasthan)-333 031, INDIA

Dept of Mechanical Engineering, University College of Engineering, Osmania University,

Hyderabad.

Department of Mechanical Engineering, Madan Mohan Malaviya University of Technology,

Gorakhpur-273010, Uttar Pradesh, India

Department of mechanical engineering,NIT Warangal,India,506004

Dept.of Mechanical Engineering, K L University, Vaddeswaram, Guntur, A.P, India

Hiregoudar Yerrennagoudaru

Professor and PG Co-ordinator (Thermal Power Engineering), Mechanical Engineering

Department, RYMEC Bellary, Karnataka, India

Mohammed Imran 0 35 7

Kanishka Jha 0 36 9

Naseeb Khan 0 37 9

Sukhraj Singh 0 38 6

Sreedhar D 0 39 8

Sivaselvi K 0 40 7

Vilas G Dhore 0 41 6

Mobi Mathew 0 42 9

Swades Ranjan Bera 0 43 10

Sandeep Kumar 0 44 11

A. G. Gayathri 0 45 5

Sarfraj Ahmed 0 46 9

Head of Department of Mechanical Engineering, Ghousia College of Enginnering-

Ramanagaram-562159, Affiliated VTU, Karnataka, India.

Department of Mechanical Engineering, DIT University, Dehradun, Uttarakhand, India

Associate Professor, Department of Mechanical Engineering, Shadan College of Engineering and Technology, Hyd- 500 008,Telangana,

India

Thapar University, Patiala 147004, Punjab, India

DepartmentMechanical and Industrial Engineering, University of South Africa,

Johannesburg 1710, South Africa

Department of Mechanical Engineering, Amrita School of Engineering, Amritapuri,Amrita

Vishwa Vidyapeetham, Amrita University - 690 525, India

Veermata Jijabai Technological Institute, Mumbai, 400019, India

Department of Energy and Environment, TERI University, Vasant Kunj, New Delhi-110 070,

Delhi, India

Department of Physics and Technophysics, Vidyasagar University, Midnapore-721102,

India

Department of Metallurgical and Materials Engineering, Indian Institute of Technology

Roorkee, Roorkee 247667, India

Department of Physics, Dayananda Sagar College of Engineering, Shavige Malleswara

Hills, Kumaraswamy Layout, Bangalore 560078, Karnataka, India

Dept of Mechanical Engg, RSR-RCET, Kohka, Bhilai-490024, India

Nitin G. Kanse 0 47 10

Amit R Patil 0 48 7

Aditya Prakash 0 49 10

A Sambasiva Rao 0 50 8

Ladeesh V G 0 51 11

M.Senthi Raja 0 52 9

Anubha Deshpande 0 53 7

T. Sarkar 0 54 10

Raktim Bhattacharya 0 55 8

0 56 9

Prashant Dhanke 0 57 5

Department of Chemical Engineering, Finolex Acdemy of Management and Technology,

Ratnagiri-415639, India

Reaserch Scholar, G H Raisoni College of Engineering and Management, Wagholi, Pune

412216 & Asst Professor, Mechanical Dept MES College of Engineering, Pune 411001

Netaji Subhash Institute of Technology,Sector-3,Dwarka,New Delhi-110078,INDIA

Defence Metallurgical Research Laboratory, Kanchanbagh P.O., Hyderabad – 500 058, India

Department of Mechanical Engineering, National Institute of Technology Calicut,

Calicut- 673 601, Kerala, India

Research Scholar,Depatrtment of EEE Pondicherry Engineering college, Pondicherry-

605014, India

National Institute of Technology Warangal, Warangal506 004, India

School of Automotive Engineering, Jadavpur University, Kolkata-700032, India

M.Tech. Student, School of Laser Science and Engineering, Jadavpur University, Kolkata-

700032,India

Sandeep Kumar Dwivedi

Ph.d scholar,Mechanical Engineering, Manit, Bhopal 462003, India

Chemical Engineering Department, LIT, Nagpur(MH) 440033

K. K. Kishore 0 58 11

Lakshmi Yadav 0 59 12

0 60 9

Mukesh Kumar 0 61 6

M.Ayaz Afsar 0 62 Lecturer,Govt.Polytechnic,Amravati,India 12

Ravi Kain 0 63 6

D. Mohana krishnudu 0 64 7

Madhavi Barla 0 65 10

Deepesh Singh 0 66 7

Sunil R.Patil 0 67 9

Aashish Gandigude 0 68 Dept. of Mech.Engg,ZCoER,Pune,India 5

U. Ravi Kiran 0 69 5

I. Sudhakar 0 70 7

Dept. of Mechanical Engineering, Narasaraopeta Engineering college,

Narasaraopet, A.P., India

School of Mechanical Engineering & Building Sciences (SMBS) VIT University-Chennai,

600127, India

Vemuri SRS Praveen Kumar

Academy of Scientific & Innovative Research (AcSIR), CSIR-CSIO, Chandigarh

CSIR-Central Scientific Instruments Organisation, Sector 30C, Chandigarh, 160030,

India

Department of Mechanical Engineering, MANIT Bhopal, India

Research scholar, Geethanjali College of Engineering & Technology, Kurnool, AP,

518002, India

Research Scholar, associate Professor Departmentof Mechanical Engineering,

BITSPilani, Hyderabad Campus Hyderabad-500078, Telangana, India

Department of Mechanical Engineering, MANIT Bhopal, India

Department of Mechanical Engineering, AISSMS College of Engineering, Pune-

411001,Maharashta, India

Defence Metallurgical Research Laboratory, Kanchanbagh P.O., Hyderabad – 500 058,

India.

Associate Professor, Department of Mechanical Engineering Department, MVGRCE(A),

Vizianagaram,530005, A.P., India

Ashish Thakur 0 71 10

Nisha Singhal 0 72 7

M Anil Prakash 0 73 8

V Vijaya Rama Raju 0 74 8

Amit Suhane 0 75 10

Sanjay Soni 0 76 9

Prakhar Chansauria 0 77 12

Utkarsh Pandey 0 78 12

Sunil Kumar 0 79 6

Anant Saraogi 0 80 11

Dr. Priti Mishra 0 81 5

Mohd Azmal Hussain 0 82 8

M.Tech, Dept. of Mechanical Engineering, MANIT Bhopal-462003, M..P., India

Department of Mathematics, Maulana Azad national Institute of Technology, Bhopal, India

MVGR College of Engineering, Vizianagaram,535005,INDIA

Associate Professor, Department of Electrical and Electronics Engineering, GRIET,

Hyderabad

Assistant Professor, Mechanical Engg. Deptt. MANIT Bhopal, 462003,India

Associate professor, Department of Mechanical Engineering, MANIT Bhopal, India-462003

Research Scholar, Department of Mechanical Engineering, MANIT, Bhopal-462003, India

M.E. Scholar, Department of Mechanical Engineering, SATI, Vidisha, M.P., India.

Associate Professor, Department of Mechanical Engineering, MANIT,Bhopal M.P.462003,

India

Maulana Azad National Institute of Technology, Bhopal, 462003, Madhya Pradesh,

India

Assistant Professor , Department of Manangement Studies, MANIT, Bhopal –

462003, India

Department of Mechanical Engineering, Noida Institute of Engineering and Technology,

Greater Noida, U.P, India

A.Venkata Vishnu 0 83 9

A.ElAmri 0 84 6

PradeepJohnson 0 85 7

Anjal R. Patel 0 86 8

Surabhi Lata 0 87 8

B. Kishan 0 88 8

Radha Krishna Lal 0 89 6

K. Aruna Prabha 0 90 VNRVJIET,Bachupally,Hyderabad,India 8

Arunangsu Das 0 91 9

Nishant K. Singh 0 92 10

Vijay Gautam 0 93 10

Asst.Professor,Department of Mechanical Engineering, NNRG, Hyderabad, India.

Department of Physics, Faculty of Sciences at Tetouan, Tetouan 93030, Morocco

Department of Mechatronics Engineering,Hindusthan College of

Engineering and Technology,Coimbatore-641032

Department of Mechanical Engineering, Alpha college of Engineering and

Technology,Gandhinagar-382721, Gujarat, India

Maharaja Agrasen Institute of Technology, Rohini, Delhi 110086, India

Department of Mechanical Engineering, MVSR Engineering College, Hyderabad, Telangana,

India

Department of Mechanical Engineering, Madan Mohan Malaviya University of Technology,

Gorakhpur-273010, Uttar Pradesh, India

Department of Mechanical Engineering,Jadavpur University, Kolkata-

700032, India

Department of Mechanical Engineering, HCST, Mathura, India

Department of Mechanical Engineering, DTU, Delhi-110042, India

Shivaraj S. Vadgeri 0 94 7

Ritam Chatterjee 0 95 8

MinatiKumari Sahu 0 96 8

Pradeep Khanna 0 97 14

Hodbe G.A. 0 98 9

Sirsendu Mahata 0 99 8

Sovan Bhowmick 0 100 10

Jay Airao 0 101 8

A.AnithaLakshmi 0 102

Anurag Vaidyanathan 0 103 6

Krishna Toshniwal 0 104

B. V. Ramanaiah 0 105 10

Vishnu P 0 106 10

Department of Mechanical Engineering,AISSMS College of Engineering,

Pune-411001, Maharashtra, India

Discipline of Mechanical Engineering, Indian Institute of Technology Gandhinagar-382355,

India

-CSIR-National Metallurgical Laboratory, Jamshedpur, India-831007

Netaji Subhas Institute of Technology, New delhi-110078, India

Student of Mechanical Engg. Dept.,SSIEMS,Parbhani,Maharashtra, India

Department of Mechanical Engineering, Kalyani Government Engineering College, Kalyani 741235, Nadia, West Bengal, India

ME student, Mechanical Engg. Dept.,Jadavpur University, Kolkata 700032, India

Mechanical Engineering Department, IITRAM ,Ahmedabad-380026,Guajrat,India

Department of Mechanical Engineering, BITS Pilani, Hyderabad, Telangana, 500078, India

Department of Mechanical Engineering, BITS Pilani, Hyderabad, Telangana, 500078, India

Department of Mechanical Engineering, Indian Institute of Technology,Guwahati, Guwahati-

781039, Assam, India

Professor, Dept. of Mech. Engg. NSS College of Engineering, Palakkad - 678008, India

K.Limbadri 0 107

Kurra Suresh 0 108 9

D. Rajamani 0 109 8

Karmjit Singh 0 110 10

A. U. Karmarkar 0 111 8

Vootla Ashok Kumar 0 112 6

K.Satish Prakash 0 113 11

0 114 8

Deepak Kumar 0 115 5

Swapnil Magar 0 116 10

Ramakant Rana 0 117 7

Guru B. Kamalakar 0 118 10

Paresh Panchal 0 119 6

BITS-Pilani Hyderabad Campus Hyderabad, Telangana, India

Centre for Autonomous System Research (CASR), Department of Mechanical

Engineering, Vel Tech University, Avadi, Chennai- 600062, India

Mechanical Engineering Department, School of Engineering and IT, Federation University, Mt

Helen campus, Australia.

K. J. Somaiya College of Engineering, Vidyavihar Mumbai, India-400077

Research scholar (15412334), Dept of ME, shri Jagadishprasad Jhabarmal Tibrewala

University, jhunjhunu, Rajasthan

Assistant Professor, Mech. Engg. Dept., Amrita Sai Institute of Science and Technology,

Vijayawada, INDIA

Kanuparti Vishnu Prashant Reddy

Student, Mechanical Engineering Dept., Muffakham Jah College of Engg & Tech,

Telangana, 500034, India

Department of Metallurgical and Materials Engineering, Indian Institute of Technology

Roorkee-247667, Uttarakhand, India

M. Tech. Student, Symbiosis Institute of Technology, Pune-41215, Maharashtra, India

Maharaja Agrasen Institute of Technology, Rohini, Delhi-110085, India

M.E.S. College of Engineering,pune-411001, Maharashtra, India

Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar, Gujarat 382428,

INDIA

Trushal Sardhara 0 120 6

Satyanarayana A 0 121 6

Prudhvi Reddy Gutta 0 122 6

Puneeth Valmiki 0 123 6

Pavan Kumar Potdar 0 124 8

Priyank B. Patel 0 125 7

R.K.Dwivedi 0 126 7

Dr.Praveen vasamsetty 0 127 4

JitendraSatpute 0 128 8

Rajendra Chavhan 0 129 22

Diptikanta Das 0 130 8

Narendra Kumar 0 131 10

Aditya Mohan Alwala 0 132 4

Samir Chakravarti 0 133 7

Self employed Mechatronics Engineer,Surat-395006,India

Defence Metallurgical Research Laboratory, Kanchanbagh P.O., Hyderabad – 500 058, India

UG Student, Department of Mechanical Engineering, Maulana Azad National Inistitute

of Technology, Bhopal 462003, India.

UG Student, Department of Mechanical Engineering, Maulana Azad National Institute

of Technology, Bhopal 462003, India

Associate Professor, Mechanical Engineering Department, Birla Institute of Technology & Science Pilani, Pilani Campus (Rajasthan) –

333 031, INDIA

Assistant Professor, Department of Mechanical Engineering, Merchant Institute of Technology,

Mehsana-384315, Gujarat, India

Associate Professor, Mechanical Engineering Department, MANIT Bhopal, India

Department of oral & maxillofacial surgery, Panineeya Institute of Dental Science &

Research Center, Hyderabad, Telangana, India

Research scholar, Mechanical Engineering Dept. Veermata Jijabai Technological Institute,

Mumbai ,India

Mechanical Engineering, Government Polytechnic College, Bandra, Mumbai, India

School of Mechanical Engineering, KIIT University, Bhubaneswar-751024, India

Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, INDIA

Department o fOral &Maxillofacial Surgery, Panineeya Institute of Dental Science &

Research Center, Hyderabad, Telangana, India.

Assistant Professor, Jalpaiguri Govt. Engineering College, Jalpaiguri, 735102, India

N D Mehta 0 134 6

0 135 5

Durga Prasad 0 136 8

Ajay Verma 0 137 8

Rajesh Purohit 0 138 14

Saraswati Rana 0 139 8

0 140

Rupinder Singh 0 141 11

Rahul 0 142 8

0 143 6

S. Banerjee 0 144 8

Souvik Das 0 145 9

Mohd Salim Qureshi 0 146 10

S. V. Salunke 0 147 8

Ajit G. Mohite 0 148 11

Mechanical Engineering Dept., Government Engineering College, Bhavnagar, Gujarat India.

Santosh Kumar malyala

Department of Mechanical Engineering, National Institute of Technology Warangal,

Warangal, Telangana, India.

Mechanical Engineering Department, Madan Mohan Malaviya University of Technology,

Gorakhpur-273010 (U.P.), India

Department of Mechanical Engineering, Maulana Azad National Institute of

Technology, Bhopal, India

Mechanical Engineering Department, MANIT, Bhopal-462003, MP, India

Assistant Professor, Department of Chemistry, RKDF University, Bhopal, -462 051

Department of Production Engineering, GNDEC, Ludhiana 141006, India

Department of Mechanical Engineering, National Institute of Technology, Rourkela-

769008, Odisha, INDIA

K.Viswanath Allamraju

Department of Mechanical Engineering, NIT Warangal, India -506004

Department of Mechanical Engineering, Narula Institute of Technology, Kolkata-700109, India.

Maulana Azad National Institute of Technology, Bhopal, Madhya Pradesh 462003,

India

Maulana Azad National Institute of Technology,Bhopal, 462003, India

Department of Mechanical Engineering, Sinhgad Institute of Technology and Science,

Pune -411041, India

M.E.S. College of Engineering, Pune-411001, Maharashtra, India

Anirban C. Mitra 0 149 8

N. Subramanyam 0 150 10

TVR Sekhar 0 151 Amity University,Uttar Pradesh,Noida 12

0 152 8

Rahul Basu 0 153 6

0 154 6

Vimal Babu.U 0 155 11

D Chandra Naik 0 156 18

Kshitij Mohan Sharma 0 157 6

Renuka Kamdar 0 158 7

Pushkar Jha 0 159 10

D.Ravi 0 160 9

P. Bhatt 0 161 5

Aashish Gandigude 0 162 Dept. of Mech.Engg, ZCoER,Pune,India 5

MES College of Engineering, Pune-411001, Maharashtra, India

Dept. of Mechanical Engineering, JNTUA, Anantapuramu-515002,A.P, India.

Sachin Ashok Sonawane

Walchand Institute of Technology, Solapur-413006, Maharashtra, India

Adarsha Institute of Technology, Kundana, Bangalore 561120

Shrikrushna B. Bhosale

SVERI's College of Engineering, Pandharpur-413304, Maharashtra, India

VFSTR Vignan University,Vadlamudi, Guntur, AP,India

Dept. of Mechanical Engineering, National Institute of TechnologySurathkal, India

Maharaja Agrasen Institute of Technology, Rohini, Delhi 110086, India

Maulana Azad National Institute of Technology, Bhopal, M.P., India

Indian Institute of Technology (BHU), Varanasi 221005, India

Mechanical Engineering Department, Maddawalabu University, Bale robe,

Ethiopia.247

Silver Oak College of Engineering and Technology,Ahmedabad- 382481, India

Amit Sharma 0 163 13

0 164 13

Gayatri S. Joshi 0 165 6

Sohini Chowdhury 0 166 7

Ajay Verma 0 167 5

Kamlesh Pant 0 168 9

Nitin Kotkunde 0 169 8

Abhay Agrawal 0 170 10

0 171 L & T Construction ECC Division INDIA 9

Rahul 0 172 8

Shikhar Goel 0 173 8

Omkar Kulkarni 0 174 11

PEC University of Technology, Sector-12, Chandigarh-160012, India

Uma Maheshwera Reddy Paturi

CVR College of Engineering, Vastunagar, Mangalpalli (V), Ibrahimpatnam (M),

Hyderabad, 501510, India

Zeal College of Engineering & Research Pune,India

Department of Mechanical Engineering, North Eastern Regional Institute of Science And

Technology, Nirjuli, Arunachal Pradesh 791109 India

Department of Mechanical Engineering, Mualana Azad National Institute of

Technology, Bhopal, India

Department of Mechanical Engineering,NIT Raipur (C.G),India

Department of Mechanical Engineering, BITS-Pilani, Hyderabad Campus, Telangana, India –

500078

Department of Mechanical Engineering, Rewa Engineering College, Rewa, MP, India

Rupesh Kumar Malviya

Department of Industrial Design National Institute of Technology, Rourkela 769008,

Odisha, INDIA

Lovely Professional University, Phagwara, Punjab, 144411, India

Zeal College of Engineering & Research, Narhe, Pune, India

0 175 8

Diptikanta Das 0 176 7

0 177 7

Nehal Dash 0 178 7

Tushar Y. Badgujar 0 179 12

J.Babu 0 180 8

0 181

B. Siva kumar 0 182 9

G.kartheek 0 183 10

D.Devaiah 0 184 8

0 185 8

Dr Ruby Mishra 0 186 8

Amin Ziaei-Nia 0 187 9

Bhaskar Chandra Kandpal

Mechanical Engineering Department, IPEC, Ghaziabad, INDIA

School of Mechanical Engineering, KIIT University, Bhubaneswar-751024, India

Nimo Singh Khundrakpam

IKG Punjab Technical University, Kapurthala-144603, INDIA

Department of Mechanical Engineering, Birla Institute of Technology, Mesra, Ranchi,

835215, India

MET’s Institute of Engineering, Nashik-422003, India

St. Joseph’s College of Engineering& Technology, Choondacherry,686575,

Kerala,India.

Department of Mechanical Engineeirng, VNR vignana jyothi institute of engineering &

technology(autonomous), Hyderabad - 500090, Telangana, India

Department of mechanical engineering,,Lakireddy Balireddy college of

Engineering,Mylavaram,521230,India

Department of Mechanical Engineering, University College of Engineering, OU,

Hyderabad, India

Rashed Mustafa Mazarbhuiya

Assam Engineering College, Guwahati-781013, India

KIIT University, School of mechanical engineering,Bhubaneswar, Odisha-751024,

India

Department of Civil Engineering, Hakim Sabzevari University (HSU), Iran

Apurba Pathak 0 188 9

Ravi Butola 0 189 10

0 190 7

Chirag G. Dalwadi 0 191 5

Sagar M Baligidad 0 192 8

Asma Perveen 0 193 8

M.V.R.Durga Prasad 0 194 8

B. Ravi Sankar 0 195 6

B. Satyanatayana 0 196 8

Sagar M Baligidad 0 197 8

R Venkata Rao 0 198 9

0 199 10

Mechanical Engineering Department, Royal school of Engineering & Technology,

Guwahati, 781035, India

Department of Mechanical Engineering, Delhi Technological University, New Delhi-110042,

India

Sandeep Sitaram Wangikar

Department of Mechanical Engineering, SVERI's College of Engineering, Pandharpur,

Pandharpur-413304, Maharashtra, India

Department of Mechanical Engineering, Alpha College of Engineering and

Technology,Khatraj-382721, Gujarat, India

Departent of Mechanical Engineering, CMR Institute ot Technology, Bangalore and 560037,

Karnataka, India

Nazarbayev University, 53 Kabanby Batyr, Astana 10000, Kazakhstan

Department of Mechanical Engineering, VNRVJIET, Hyderabad, Telangana, India

Department of Mechanical Engineering, Bapatla Engineering college, Bapatla, A.P,

India, PIN-522102

VNR-VJIET, Bachupally, Hyderebad-500090, INDIA

Departent of Mechanical Engineering, CMR Institute ot Technology, Bangalore and 560037,

Karnataka, India

Department of Mechanical Engineering, S. V. National Institute of Technology, Surat, India

395007

Srinivasa Reddy Vempati

Dept. of Mechanical Engineering, QIS College of Engineering & Technology, ONGOLE ,

India

M. Venkata Ramana 0 200 6

Venkatesh Mundada 0 201 15

Dilip Khedekar 0 202 9

T. Sreekumar Rajesh 0 203 10

Jashanpreet Singh 0 204 8

Siddharth Choudhary 0 205 9

Arun J. Kulangara 0 206 6

A. D. Pathak 0 207 9

Sunita Parinam 0 208 6

Basani Satish 0 209 KITS Warangal, Telangana, India 7

Bijaya Bijeta Nayak 0 210 7

Department of Automobile Engineering, VNR Vignana Jyothi Institute of Engineering & Technology, Hyderabad, India – 500090

Netcracker Technology, Alumni of BITS Pilani 2015 BE Mechanical batch, Hyderabad-

500084, India

Jawaharlal Nehru Engineering College, Aurangabad, Maharashtra, India

Department of mechanical Engineering, S V National institute of Technology, Ichchanath,

Surat. Gujarat, India 395007

Thapar University, Patiala 147004, Punjab, India

Division of Manufacturing Processes & Automation Engineering, Netaji Subhas

Institute of Technology, New Delhi -110078, India

Department of Mechanical Engineering, NIT Warangal, India,506004

Department of Mechanical Engineering,SKNSITS,Lonalava, Pune , India

410401

CSIR-Central Scientific Instruments Organization, Sector -30 C, Chandigarh,160030, India.

School of Mechanical Engineering, KIIT University, Bhubaneswar, Odisha, 751024,

India

Nikhil Kumar 0 211 9

Angshuman Roy 0 212 11

B.Ch.Nookaraju 0 213 10

Navneet Khanna 0 214 7

Ashutosh Gupta 0 215 8

0 216 NIT Warangal,Telangana state, India-506004 6

0 217 6

Anitha D 0 218 11

Aharwal K R 0 219 7

Prabhunandan G S 0 220 7

L. Selvarajan 0 221 8

Shikhar Goel 0 222 10

Brainware Group of Institution, Mechanical Engineering Department, Kolkata

Department of Power Engineering, Jadavpur University, Kolkata, 700032, India

GRIET, Mechanical Engineering, Hyderabad-Telengana, India-500090

Mechanical Engineering Department, IITRAM, Ahmedabad-380026, Gujarat, India

Mechanical Engineering Department, IITRAM, Ahmedabad-380026, Gujarat, India

K.Viswanath Allamraju

Satyanarayana Kosaraju

Dept.Mech.Engg. GRIET Hyderabad 500090, Telangana, India

Institute of Aeronautical Engineering, Hyderabad, Telangana, India, 500043

Maulana Azad National Institute of Technology, Department of Mechanical

Engineering, Bhopal(462003), India

ghousia college of engineering, ramanagara, karnataka, india

Department of Mechanical Engineering,Mahendra Institute of Engineering

and Technology, Nammakal-637503, Tamilnadu

Lovely Professional University, Phagwara, Punjab, 144411, India

Sambhrant Srivastava 0 223 8

K.D.Mohapatra 0 224 12

W.Shivaraj Singh 0 225 6

Thrinadh Jadam 0 226 8

Bighnesh Kumar Sahu 0 227 9

0 228 6

Radha Krishna Lal 0 229 9

Ramanjaneyulu V 0 230 12

Pradeep Khanna 0 231 9

0 232 7

N.K.Kharate 0 233 12

Ravneet Singh 0 234 11

K.Satyanarayana 0 235 7

Rajesh Sharma 0 236 7

Department of Mechanical Engineering,Jims greater noida,(UP)201308,India

Department of Mechanical Engineering, National Institute of Technology Rourkela

769008, IndiaVNR VJIET, Bachupally, Hyderabad 500090,

India

Department of Mechanical Engineering, National Institute of Technology, Rourkela-

769008, Odisha, INDIA

Department of Mechanical EngineeringNational Institute of Technology,

Rourkela-769008, Odisha, INDIA

K.Viswanath Allamraju

Department of Mechanical Engineering,NIT Warangal, Telangana state,India-506004

Department of Mechanical Engineering, Madan Mohan Malaviya University of Technology,

Gorakhpur-273010, Uttar Pradesh, India

V.R.Siddhartha Engineering College, Vijayawada, India

Netaji Subhas Institute of Technology, New Delhi,110078, India

S.V.Uma Maheswara Rao

Department of Marine Engineering, Andhra University, Visakhapatnam, INDIA—530003

NDMVPSKBTCOE,Dept.Of Mechanical Engg,Gangapur Road,Nashik

(M.S),422003,India

Mechanical Engineering Department, Bhai Gurdas Institute of Engineering & Technology,

Sangrur,148001, Punjab, India

Department of Mechanical Engineering , ANITS, Visakhapatnam- INDIA . 531162.

Defence Metallurgical Research Laboratory, Kanchanbagh P.O., Hyderabad – 500 058, India

0 237 9

Sanjay Kumar 0 238 8

0 239 6

Rita Kumari Sahu 0 240 6

Hareram Lohar 0 241 11

Jaydeep M. Kapopara 0 242 5

A. Lakshmi narayanaa 243 13

Dhrupal J. Kotadiya 0 244 7

Ranjan Kumar Mishra 0 245 10

Anirban C. Mitra

0 246 7

Ibrar Jahan M.A0 247 7

Dr Ruby Mishra

0 248 8

Syeda Romana

0 249 5

Mr.Kondru Nagendra Babu

Vnr vignanajothi institute of engineering and technology,Hyderabad-500090,India

Department of Mechanical Engineering,I.K.Gujral Punjab Technical

University, Kapurthala (Pb.) - 144603, India

Thokchom Subhaschandra Singh

Department of Mechanical Engineering, NIT Manipur, Langol, Imphal-795004, India

School of Mechanical Engineering Engineering, KIIT University, Bhubaneswar-

751024, Odisha, India

Department of Mechanical Engineering, Heritage Institute of Technology, Kolkata

700107, India

McMaster Manufacturing Research Institute, Department of Mechanical

Engineering,Mcmaster University, 1280 Main Street West, Hamilton-L8S4L7, Ontario,

Canada

JNTU Hyderabad,Telangana State, India-500085

Mechanical Engineering Department, Silver Oak College of Engineering and Technology,

Ahmedabad-382481,Gujarat, India

Department of Mechanical Engineering, Shiv Nadar University, Gautam Buddha Nagar, Uttar

Pradesh, India 201314

MES College of Engineering, Pune-411001, Maharashtra, India

Department of Electronics and Communication Engineering,, RNS Institute of Technology,

Bangalore 560 098, India

KIIT University, School of mechanical engineering,Bhubaneswar, Odisha-751024,

India

Mechanical Engineering Department, Muffakham Jah College of Engineering and

Technology, Hyderabad, Telangana – 500034

Pujan Sarkar 0 250 10

M. Shariat 0 251 8

Mehran Shariat 0 252 7

Anshul Chaudhary 0 253 10

Puja Basu Chaudhuri 0 254 10

N.D.Misal 0 255 11

Shahid Husain 0 256 8

Pankaj Dhatrak 0 257 8

Ratnakar Ghorpade 0 258 9

Pradip D.Haridas 0 259 13

Anil Kumar S 0 260 5

G. Srinivasa Gupta 0 261 6

Kiranchand G.R 0 262 M.E.S. College of Engineering,Pune, India 15

0 263 5

Department of Mechanical Engineering, Jadavpur University, Kolkata- 700032, India

Department of Civil Engineering, Hakim Sabzevari University (HSU), Iran

Department of Civil Engineering, Hakim Sabzevari University (HSU), Iran

Department of Mechanical Engineering, Delhi Technological University(New Delhi-110042,

India

Department of Civil Engineering, Heritage Institute of Technology,Kolkata 700107, India

Ph.D. Student, Department of Mechanical Engineering, Dr. Babasaheb Ambedkar Tech.

Uni.Lonere-402 103, MS, INDIA

Department of Physics, Aligarh Muslim University, Aligarh-202002, India

MAEER’S Maharashtra Institute of Technology, Pune 411038, India

Professor & Head, Department of Conservative Dentistry & Endodontics, MA Rangoonwala

College of Dental Sciences & Research, Pune.

Research Scholar, SVERI’s College Of Engineering, Pandharpur, Dist.

Solapur,413304, India

Department of Mechanical and Manufacturing Engineeering,M.S.Ramaiah University of

Applied Sciences, Bengaluru-58, India

VNR Vignanajyothi Institute of Engineering & Technology, Bachupally, Hyderabad-500090,

India

R. J. Golden Renjith Nimal

Department of Mechanical Engineering, Bharath University, Selaiyur, Chennai 600 073,

India

Radha Krishna Lal 0 264 8

Satish Kumar Verma 0 265 8

Radha Krishna Lal 0 266 8

Radha Krishna Lal 0 267 8

Anil Shinde 0 268 10

Navneet Khanna 0 269 7

V.V.VenuMadhav 0 270 8

Binoy Kumar Baroi 0 271 8

Vikas Kannojiya 0 272 10

Eswara Kumar.A 0 273 11

Chandramouli S. 0 274 10

Sachit T S 0 275 8

0 276 6

Department of Mechanical Engineering, Madan Mohan Malaviya University of Technology,

Gorakhpur-273010, Uttar Pradesh, India

Assistant Professor, SRICT Ankleswar, Gujarat, Dist. Bharuch, India,

Department of Mechanical Engineering, Madan Mohan Malaviya University of Technology,

Gorakhpur-273010, Uttar Pradesh, India

Department of Mechanical Engineering, Madan Mohan Malaviya University of Technology,

Gorakhpur-273010, Uttar Pradesh, India

Shri Vithal Education and Research Institute’s College of Engineering, Pandharpur-413304,

India

Mechanical Engineering Department, IITRAM(Government of Gujarat Initiative),

Ahmedabad – 380026, India

Department of Mechanical Engineering, V. R. Siddhartha Engineering College, Vijayawada,

Andhra Pradesh-520007, India

Department of Mechanical Engineering, NIT Silchar, Assam-788010, India

Assistant Professor, Department of Mechanical Engineering, SGT University, Gurgaon 122505,

India

Dept.of Mechanical Engineering, K L University, Vaddeswaram, Guntur, A.P, India

Dept. Mechanical Engg, Kakatiya Institute of Technology & Science, Warangal,506015,

India

Assistant Professor, Symbiosis Institute of Technology(SIT), Symbiosis International

University(SIU), Lavale,Pune-412115. Maharashtra, India

Vasudeva Rao Veeredhi

DepartmentMechanical and Industrial Engineering, University of South Africa,

Johannesburg 1710, South Africa

Radha Krishna Lal 0 277 7

Nikul D. Patel 0 278 7

Pranshu Gehlot 0 279 8

Ashwin Chopane 0 280 12

0 281 10

S Debnath 0 282 7

Pavan G. Chaudhari 0 283 11

Suswagata Poria 0 284 9

Premkumar Manda 0 285 8

Saikat Chatterjee 0 286 9

P.S.S. Murthy 0 287 7

0 288 10

Talluri Srinivasa Rao 0 289 13

Department of Mechanical Engineering, Madan Mohan Malaviya University of

Technology, Gorakhpur-273010, Uttar Pradesh, India

Arkon Engineers, Gandhinagar-382028, Gujarat, India

Research Scholar, Madhav Institute of Technology & Science, Gwalior, 474005, India

UG Scholar, Mechanical Engineering Department VIIT Pune, Pune 411048, India

Dr. Hiregoudar Yerrennagoudaru

Professor and PG Co-ordinator (Thermal Power Engineering), Mechanical Engineering

Department, RYMEC Bellary, Karnataka, India

Department of Production Engineering, National Institute of Technology Agartala,

Tripura 799046, India

Assistant Professor, Department of Mechanical Engineering, Merchant Institute of Technology,

Mehsana-384315, Gujarat, India

Department of Mechanical Engineering, Jadavpur University, Kolkata, 700032, India

Defence Metallurgical Research Laboratory, Kanchanbagh P.O., Hyderabad – 500 058, India

Mechanical Engineering Department, Sikkim Manipal Institute of Technology, Majhitar-

737132, India

Department of Mechanical Engineering, K. I. T. S, Warangal - 506015, Telangana, India;

Aishwary Singh Rajawat

Research Scholar, Madhav Institute of Technology & Science, Gwalior, 474005, India

Department of Automobile Engineering,VNRVJIET,Hyderabad-

500090,India.

Mohd. Zahid Ansari 0 290 5

Dwaipayan De 0 291 10

0 292 6

P. D. Ingle 0 293 9

Dr. S.K. Dhakad 0 294 8

0 295 7

S.Jai Krishna Sahith 0 296 8

Jhansi Jadav 0 297 6

J.Venkata suresh 0 298

S Banumathy 0 299 7

S.RaviSekhar 0 300 7

L. Selvarajan 0 301 8

PDPM-Indian Institute of Information Technology, Design and Manufacturing,

Airport Road, Khamaria, Jabalpur 482 005, India

Assistant Professor, Mechanical Engineering Department, Institute of Engineering

&Management, Kolkata - 700091, India

Dinesh Kumar Kasdekar

Department of Mechanical Engineering,Maulana Azad National Institute of Technology, Bhopal-462051,(M.P) India

Research Scholar, V.J.T.I., Mumbai-400019 M.S.

Department of Mechanical Engineer,Asstistant . Prof ,S.A.T.I.(Engineering

College ), Vidisha,India, 464001

N Sudheer Kumar Varma

Mechanical Engineering Department, S.R.K.R Engineering College-Bhimavaram-

534204,India.

Student, M.Tech. (Pipeline Engineering), Department of Petroleum Engineering

&Petrochemical Engineering Jawaharlal Nehru Technological University Kakinada, Kakinada

– 533 003, A.P. India

School of Engineering Sciences and Technology, University of Hyderabad,

Hyderabad – 500046, INDIA

Asst. prof. & Reasearch Scholar JNTUCEH, Department of Mechanical Engineering,

GRIET, Hyderabad, Telangana ,India

Defence Metallurgical Research Laboratory, Kanchanbagh P.O., Hyderabad – 500 058,

India.

Assistant Professor in Mechanical Engineering, GokarajuRangaraju Institute of Engineering &

Technology. Hyderabad

Associate Professor, Department of mechanical Engineering, Mahendra Institute of Engineering and Technology, Namakkal, Tamilnadu

Pulakesh Chetia 0 302 8

Jagath Narayana k 0 303 12

Nisha Kumari 0 304 8

Dr.S.Geetha 0 305 6

Dinesh Kumar 0 306 6

M.Indra Reddy 0 307 6

Mohit Sood 0 308 6

NabanitaBanik 0 309 8

0 310 5

Mohamed Zakaulla 0 311 H.K.B.K.C.E, Bangalore, 560045, India 6

L. Selvarajan 0 312 9

Archana Yadav 0 313 10

Research Scholar, Department of Mechanical Engineering, NERIST, Nirjuli, Arunachal

Pradesh

Assistant Professor,Department of Mechanical Engineering, Shiv Nadar University, Dadri,

U.P, India

Associate Professor, Department of Mechanical Engineering, Birla Institute of Technology,

Mesra, Ranchi, India

Professor,Department of Civil Engineering,Rajalakshmi Engineering College, Thandalam, Chennai-602 105, Tamilnadu,India

University Institute of Engineering & Technology, Panjab University, Chandigarh-

160014, INDIA

Department of Mechanical Engineering, SRKR Engineering College, Bhimavaram-534204,

India

Assistant Professor KC College of Engineering, Nawashahr,Punjab,India

Production Engineering Department, NIT Agartala – 799046, India

Meinam Annebushan Singh

National Institute of Technology Meghalaya, Shillong – 793003, India

Associate professor ,Head of department, Department of mechanical Engineering, Mahendra Institute of Engineering and

Technology, Namakkal, Tamilnadu

Department of Mechanical Engineering, NIT Warangal, Telangana, India

Sachit T S 0 314 7

A. Lakshmi narayana 0 315 12

Sri Kant Rana 0 316 8

Harmeet Singh 0 317 7

Pankaj Charan Jena 0 318 6

Sachit T. S. 0 319 7

N. V. Subba Raju 0 320 7

C.G.Sozhamannan 0 321 Sri manakula vinayagar engineering college 8

BatluriTilak Chandra 0 322 7

0 323 9

Vemu Vara Prasad 0 324 6

Diptikanta Das 0 325 8

Associate Professor, Symbiosis Institute of Technology(SIT), Symbiosis International

University(SIU), Lavale,Pune-412115. Maharashtra,India.

RWR&DC,  Hindustan Aeronautics Limited, Bangalore-   560017, India.

Maharaja Agrasen Institute of Technology, Rohini, Delhi-110085, India

Department of Mechanical Engineering, Guru Nanak Dev Engineering College, Ludhiana

(Punjab) INDIA 141006

Professor, Department of Mechanical Engineering, Sri Vaishnavi College of

Engineering, Singipuram, Srikakulam, Andhra Pradesh

Assistant Professor, Department of Mechanical Engineering, Symbiosis International

University, Symbiosis Institute of Technology, pune-Maharastra, India-412115

Department of Mechanical Engineering, S.R.K.R. Engineering College, Bhimavaram,

Andhra Pradesh, India-534204

Research Scholar, Department of Mechanical Engineering, Sri Siddhartha Institute of Technology, Tumkur, Karnataka, India.

N.B.V. Lakshmi Kumari

Assistant Professor, Mechanical Engineering, Muffakham Jah College of Engineering and

Technology,Hyderabad-34, India.

Assistant Professor,UCEK,JNTUK.Kakinada,533003,Ind

ia

School of Mechanical Engineering, KIIT University, Bhubaneswar-751024, India

Pavithra H S 0 326 6

Y. Jasmala Joy 0 327 9

Surabhi Lata 0 328 9

Rakesh Potluri 0 329 11

M. K. Gupta 0 330 8

M RaviKumar 0 331 7

Kanishka Jha 0 332 7

0 333 6

Shahadev B. Ubale 0 334 10

0 335 10

Prof C.V. Mohan Rao 0 336 6

0 337 10

Department of Mechanical Engineering, School of Engineering, Dayananda Sagar University,

Bangalore, India,

Assistant Professor,Scott Christian College, Nagercoil, Tamil Nadu, India

Maharaja Agrasen Institute of Technology,Rohini, Delhi-110085, India

Asst. Prof., D.I.E.T,Ganguru,Vijayawada-521139,India.

Department of Mechanical Engineering, Motilal Nehru National Institute of Technology

Allahabad-211004, India

Department of Mechanical Engineering,R L Jalappa Institute of Technology, Bangalore (R),

561203, India

Department of Mechanical Engineering, Rungta College of Engg. & Tech., Bhilai, Chattisgarh,

India.

P. V. Ch. R. K. Santosh

Department of Mechanical Engineering, Swarnandhra Institute of Engineering &

Technology, Narsapur-534280

aDepartment of Mechanical Engineering, MGM’s Jawaharlal Nehru Engineering College,

Aurangabad (M.S.)-431003, India

Manvandra Kumar Singh

Department of Mechanical Engineering, Indian Institute of Technology (Banaras Hindu

University),Varanasi,221005, India

Professor, Department of Mechanical Engineering, Kakatiya University, Warangal-

506009, INDIA

Manvandra Kumar Singh

Department of Mechanical Engineering, Indian Institute of Technology(Banaras Hindu University),Varanasi,221005, INDIA

Suresh. R 0 338 5

N. Sateesh 0 339 6

A.V. Borgaonkar 0 340 10

Rakesh Potluri 0 341 10

Manish Shukla 0 342 7

P. Vijaya Kumar Raju 0 343 12

P Shiva Shanker 0 344 6

Rakesh Potluri 0 345 10

K.Vijaya Bhaskar 0 346 16

Mohd Farhan Zafar 0 347 11

Prashant Meshram 0 348 8

Narender Panwar 0 349 7

Hari Vasudevan 0 350 11

Department of Mechanical and Manufacturing Engineering, M.S.Ramaiah University of

Applied Sciences, Bengaluru, India – 560058, India

Professor,Department of Mechanical Engineering, Gokaraju Rangaraju Institute of

Engineering and Technology,Hyderabad,,India

P.G.Student , BVRIT Narsapur, Medak 502313, India

Asst. Prof.,Mechanical Engineering Dept., D.I.E.T,Ganguru,Vijayawada-521139,India.

Research Scholar Mechanical Engineering Department, S.A.T.I. Vidisha-464001India

Department of Mechanical Engineering, S.R.K.R. Engineering College, Bhimavaram,

Andhra Pradesh, India-534204

Faculty in Mechanical Engineering, University College of Engineering & Technology,MGU,

Nalgonda- 508001

Asst. Prof., Dept. of Mechanical Engineering, D.I.E.T,Ganguru,Vijayawada-521139,India.

Dept. of Mechanical Engg, D.A. Govt. Polytechnic, Ongole– 523 002, India

Department of Mechanical Engineering, Z.H.C.E.T., A.M.U., Aligarh, India.

Indian Institute Of Information Of Technology Design And Manufacturing, Jabalpur India

Uiet, Panjab University, Chandigarh-160014, India

Principal, Dj Sanghvi College Of Engineering, Mumbai, India

Rajesh Purohit 0 351 9

Pushyamitra Mishra 0 352 5

R. S. Rana 0 353 7

Ravi Kumar P 0 354

D. Rajamani 0 355 11

Sadanand Verma 0 356 6

Bijaya Bijeta Nayak 0 357 7

A.Naresh Kumar 0 358 10

0 359 8

Umasankar Das 0 360 6

Amit kumar 0 361 6

0 362 8

Amin Ziaei-Nia 0 363 9

Mechanical Engineering, Manit, Bhopal – 462003,

Assistant Professor , Department Of Mechanical Engineering, Manit, Bhopal –

462003,

Assistant Professor, Department of Mechanical Engineering, MANIT Bhopal, India

Assistant Professor, Institute Of Aeronautical Engineering, Hyderabad, Telangana, India,

500043

Centre For Autonomous System Research (Casr), Department Of Mechanical

Engineering, Vel Tech University, Avadi, Chennai- 600062, India

Department of Mechanical & Automation Engineering, Amity School of Engineering and

Technology, Amity University, Noida, Uttar Pradesh, India

School Of Mechanical Engineering, Kiit University, Bhubaneswar, Odisha, 751024,

India

Research Scholar, Department Of Mechanical Engineeirng, Andhra University,

Visakhapatnam - 530003, Ap, India

Shah Shubham Kamlesh

Kiit University, School Of Mechanical Engineering,Bhubaneswar, Odisha-751024

Department Of Manufacturing Engineering, National Institute Of Foundry And Forge

Technology, Hatia, Ranchi-834003,Jharkhand, India

Indian Institute Of Technology (Ism), Dhanbad. India

Samiran Shanti Mukherjee

Institute For Plasma Research, Near Indira Bridge, Bhat, Gandhinagar-382428, India

Department Of Civil Engineering, Hakim Sabzevari University (Hsu), Iran

0 364 17

0 365 10

0 366 11

Rajesh Choudhary 0 367 8

Dipesh Popli 0 368 10

N. Yadaiah 0 369 6

Kulwinder Singh 0 370 10

Hemant Kumar 0 371 8

Nancy Sharma 0 372 6

Dileep Singh 0 373 13

Gururaj Bolar 0 374 9

KG.Thirugnanasambantham

Department Of Mechanical Engineering, School Of Engineering, Dayanandasagar

University,Bangalore, India.

Dr. Hiregoudar Yerrennagoudaru

Professor And Pg Co-Ordinator (Thermal Power Engineering), Mechanical Engineering Department, Rymec Bellary, Karnataka, India

Dr. Hiregoudar Yerrennagoudaru

Professor And Pg Co-Ordinator (Thermal Power Engineering), Mechanical Engineering Department, Rymec Bellary, Karnataka, India

Assistant Professor, Department Of Mechanical Engineering, Mimit Malout, Punjab, 152107,

India

National Institute Of Technology, Kurukshetra, 136119, India

Department Of Mechanical Engineering, North Eastern Regional Institute Of Science And

Technology, Nirjuli, Arunachal Pradesh 791109 India

Reasearch Scholar,Deparment Of Mechnical Enggineering, Mimit Malout, Punjab,

152107,India

Department Of Mechanical Engineering, Global Institute Of Technology, Jaipur 302022,

India

Csir-Central Scientific Instruments Organization, Sector -30

C ,Chandigarh,160030, India

Maharaja Agrasen Institute Of Technology, Rohini, Delhi 110086, India

Department Of Mechanical Engineering, Indian Institute Of Technology Guwahati, Guwahati,

781039, India

S.Bhanu Teja 0 375 10

Anurag Shukla 0 376 MANIT 7

V. J. Pillewan 0 377 9

Pulla Sammaiah 0 378 9

Naseema 0 379 8

G.G.Sozhamannan 0 380 14

Sanjay Kumar 0 381 11

Surabhi Lata 0 382 11

TVR Sekhar 0 383 9

SVSS Srinivas Raju 0 384 6

Amarnadh S. V 0 385 5

A.MalarRetna 0 386 18

Hitesh 0 387 7

Asst.Prfessor, Depatment of mechanical engineering, GRIET, Hyderabad

Adepartment Of Production Engineering, Veermata Jijabai Technological Institute,

Matunga, Mumbai 400019, India

Department Of Mechanical Engineering, S. R. Engineering College, Warangal.

Assistant Professor, Mechanical Engineering Department, M.J.C.E.T

Department Of Mechanical Engineering , Sri Manakula Vinayagar Engineering College,

Pondicherry, India-605107

Department Of Mechanical Engineering, I.K.Gujral Punjab Technical University,

Kapurthala (Pb.) - 144603, India

Assistant Professor,Department Of Mechanical And Automation Engineering,Maharaja

Agrasen Institute Of Technology, Rohini, Delhi, 110086, India

Mechanical Engineering, Amity University,Uttar Pradesh,Noida

Department of Nanoscience and Technology, JNTUH, India

Professor Department Of Mechanical Engineering Vnr Vignana Jyothi Institute Of

Engineering And Technology Hyderabad

Department Of Mechanical Engineering, Vnr Vjiet, Hyderabad, India

Department Of Chemistry, Scott Christian College (Autonomous), Nagercoil-3,

Tamilnadu, India.

V.P. Senthil 0 388 4

0 389 10

A.Sophia 0 390 21

Vandana Kaler 0 391 9

Shalini Jain 0 392 16

Kamal Bera 0 393 8

Sushil Kumar Singh 0 394 6

N. Gautam 0 395 9

Sachindra J. Doshi 0 396 7

Ved Prakash Sharma 0 397 5

Pravin Kumar 0 398 7

Neha Khatri 0 399 10

Maharaja Agrasen Institute Of Technology, Rohini, Delhi 110086, India

Hiregoudar Yerrennagoudaru

Department Of Physics, Vel Tech University, Avadi, Chennai 600 062, India

Professor And Pg Co-Ordinator (Thermal Power Engineering), Mechanical Engineering Department, Rymec Bellary, Karnataka, India

Assiatant Professor, Department Of Chemitry, Scott Christian College, Nagercoil-3, India

Department Of Metallurgical And Materials Engineering, Mnit Jaipur-302017, Rajasthan,

India

Dept. Of Mathematics & Statistics, Manipal University Jaipur, Jaipur-303007, Rajasthan,

India

Department Of Physics And Technophysics, Vidyasagar University, Midnapore, India

721102

Department Of Applied Mechanics, Motilal Nehru National Institute Of Technology

Allahabad, 211004, India

Mechanical Engineering Dept., Government Engineering College, Bhavnagar, Gujarat India.

Department Of Mechanical Engineering, Global Institute Of Technology, Jaipur 302022,

India

Research Scholar, Department Of Mechanical Engineering, B. V. U., College Of Engineering,

Pune, Maharashtra-411 043, India

Csir - Central Scientific Instruments Organisation, Chandigarh, 160030

Akshat Patil 0 400 6Mechanical Engineering Department, NRI Group of Institutions, Bhopal, India

10 10

7 6

6 6

9 5

7 6

3 2

6 1

9 7

5 4

Total no. of figures

Identify any figures that are in colour

K9
Enter the total number of figures appearing in the article.
L9
Enter the figure labels of any figures that will appear in colour (eg. 1A, 1C, 2, etc.) If the accepted manuscript does not include any colour figures, enter "0".

8 7

9 8

9 9

5 3

0 0

5 3

6 5

7 4

13 13

7 6

7 7

5 5

6 2

1 0

3 2

0 0

6 5

0 0

5 4

2 1

5 5

8 6

2 2

9 3

9 9

9 9

5 3

6 6

4 4

4 3

7 6

4 3

10 2

10 9

15 9

4 4

11 1

5 1

0 0

6 5

8 3

7 4

9 9

6 0

15 8

7 6

0 0

2 0

27 22

11 3

17 1

4 4

9 8

4 3

6 6

8 2

3 2

14 12

7 6

5 1

5 4

7 6

0 0

3 2

4 2

13 5

10 7

12 4

1 1

3 2

4 4

0 0

7 6

8 5

4 4

7 5

5 2

5 5

1 1

3 1

10 10

6 4

8 6

8 8

K99
fig numbers are in correct and not in format

7 6

9 2

7 1

13 7

17 9

8 4

10 8

3 3

9 7

15 14

8 6

7 4

7 7

4 2

5 0

7 7

2 1

8 5

5 2

7 5

5 5

10 8

3 3

5 4

8 8

2 0

9 1

2 1

0 0

4 2

2 2

6 4

1 0

7 5

13 13

5 5

3 1

1 1

5 4

1 0

7 7

4 3

5 5

8 6

5 4

8 2

3 1

7 3

7 5

7 5

8 4

7 6

7 6

11 11

1 0

2 2

1 0

8 8

13 8

0 0

2 0

5 4

7 6

6 6

3 1

1 1

8 6

3 3

4 3

1 0

1 0

5 4

8 8

3 3

4 3

4 4

5 5

6 5

5 5

1 1

3 3

5 4

5 4

26 25

3 3

6 3

3 3

11 11

5 3

2 2

7 6

3 2

3 1

6 6

8 7

5 5

2 1

7 5

1 1

6 4

10 6

M205
griet: Author designations are not clear

3 2

7 6

4 1

6 0

9 5

1 0

2 2

9 9

7 6

6 0

1 1

6 6

12 11

5 5

3 2

3 3

6 6

1 1

12 10

2 2

15 10

6 6

7 7

7 5

10 9

4 1

12 8

10 8

6 4

12 10

16 16

8 7

9 9

6 6

10 9

9 8

9 8

4 1

7 6

6 3

6 3

5 2

3 3

8 7

3 3

0 0

5 3

9 9

19 17

7 7

6 2

4 4

5 5

7 3

15 0

3 2

5 5

8 8

19 15

19 18

7 7

7 7

21 20

3 2

8 6

3 3

5 0

9 7

18 15

2 1

9 9

5 5

11 6

18 11

9 9

9 7

3 2

4 3

10 10

4 2

5 5

9 9

3 3

7 5

5 4

11 5

3 2

6 5

9 7

11 11

4 4

7 7

1 1

0 0

2 2

6 4

6 6

5 4

6 3

5 5

7 4

3 3

9 5

3 3

8 2

3 0

3 3

3 1

6 6

3 2

3 2

7 1

14 7

6 3

5 4

4 4

6 6

4 4

6 5

6 6

7 7

9 8

5 3

2 1

5 2

5 3

1 0

5 1

13 13

3 3

5 3

5 5

4 4

4 2

6 5

0 0

9 8

5 5

10 7

7 6

11 10

1 0

19 18

0 0

11 5

1 1

7 6

11 8

0 0

7 6

12 9

3 3

6 6

7 7

0 0

4 3

14 13

5 5

10 4

5 5

8 8

15 15

13 5

9 9

9 9

8 5

9 6

6 6

11 7

1 1

5 5

15 13

7 7

10 10

1 1

6 4

7 7

6 6

6 3

2 2

7 3

6 5

3 3

3 3

6 4

8 8

4 2

9 9

23 2

6 4

35 33

9 8

2 2

6 3

2 2

0 0

1 1

11 9

6 5

Recommended

Low cycle lifetime assessment of Al2024 alloys
Documents
DEPARTMENT OF GEOSCIENCES€¦  · Web viewMulti-Channel Seismic Proc. Geosc ... Computational Geomechanics. Geosc ... The student will bear the cost of word processing and illustrations
Documents
pure.royalholloway.ac.ukpure.royalholloway.ac.uk/ws/files/23648425/r_r2_FINAL.d…  · Web viewMulti-Stakeholder Brand Narratives: . A. n . A. nalysis of . t. he Construction of
Documents
ClearSpeak Rules and Preferences - Design Web viewMulti-Line Pauses Between Columns Rule: (MultiLinePausesBetweenColumns_Auto.eqp)44. ... select the MathPlayer menu on the Word menu
Documents
dicom.nema.orgdicom.nema.org/dicom/2013/output/docx/part03.docx  · Web viewMulti-frame Grayscale Word SC Image IOD Entity-Relationship Model. 0. ... Structured Report Document Information
Documents
Acemor Ltd - Sirius Astronomy Associationsiriusalgeria.net/im4/BounatiroMedal-Listing.doc · Web viewMulti Invention Award Winning Innovation company Acemor Ltd.attends the show with
Documents
bsdblog.files.wordpress.com  · Web viewMulti-Text Study. Walk Two Moons. By Sharon Creech. "Don't judge a man until you've walked two moons
Documents
Investigation of Surface Texture and Surface Residual ...ijens.org/Vol_20_I_01/202301-7878-IJMME-IJENS.pdf · modeling of a pure orthogonal cutting process for Al2024- T351 at
Documents
janewaysbrain.weebly.comjanewaysbrain.weebly.com/.../46007341/teks-ap-crs_alignment_8th_grad…  · Web viewmulti-paragraph essay to convey information about a topic presents effective
Documents
secure.metronaviation.com · Web viewMulti-nodal atfm NeTWORK common operating procedures (COP)2nd Edition, 14th OCT 2016 This document provides an essential framework, details of
Documents
Multi-year Accessibility Plan, January 1, 2014 - CMHA Ottawaottawa.cmha.ca/.../Accessible-Word...interim-2014.docx  · Web viewMulti-year Accessibility Plan, January 1, 2014 –
Documents
A COMPERATIVE STUDY OF SiC REINFORCEMENT EFFECT ON ... · Abstract: In thıs study, metal matrıces composite samples, Al2024 and Al6061, has been produced by powder metallurgy. Their
Documents
caseymdavis.files.wordpress.com€¦  · Web viewMulti-Text Study. Percy Jackson. and the Olympians: The Lightning Thief. by Rick Riordan “Look, I didn’t want to …
Documents
MESA - Multi-Ethnic Study of Atherosclerosis · Web viewMULTI-ETHNIC STUDY OF ATHEROSCLEROSIS QUALITY CONTROL MANUAL BASELINE EXAMINATION PROCEDURES SEPTEMBER 2001 TABLE OF CONTENTS
Documents
PUBLICATION LIST - Open Repositorywlv.openrepository.com/.../1/Matthew+PhD_Thesis.docx  · Web viewMulti-tenancy is a familiar word that comes from the real world ... and Exadata
Documents
Introduction - Department of Computer Science | The …blake/docs/mogac_cvpr12_final.docx · Web viewMulti-Object Geodesic Active Contours (MOGAC): A Parallel Sparse-Field Algorithm
Documents
dicom.nema.orgdicom.nema.org/medical/dicom/2015a/output/docx/...  · Web viewMulti-frame Grayscale Word SC Image IOD Entity-Relationship Model . 179. A.8.4.3. Multi-frame Grayscale
Documents
Role of Heat Treatment on Al2024/B4C/Graphite …...ao Nagababu B, Rajeswari C (2019) Role of Heat Treatment on Al 2024 /B 4 C/Graphite Hybrid Metal Matrix Composites. J Material Sci
Documents
Low cycle lifetime assessment of Al2024 alloys · Shehzad Saleem Khan (MSc) Geesthacht - Germany 2011. Acknowledgement This thesis is the account of three and a half years of research
Documents
MAC functional description - mentor.ieee.org€¦  · Web viewMulti-node ranging is a ranging procedure in which one or more initiators perform ranging with multiple responders
Documents