View
15
Download
1
Category
Preview:
Citation preview
Xitanium
LED driver
Datasheet
Xitanium LED drivers – spot- and downlight SELVXitanium 36W WH 0.3-1A 54V TD/Is 230V
Enabling future-proof LED technologyOur Xitanium programmable window LED drivers ensure OEMs have complete flexibility and control in producing high quality luminaires.Available in application dedicated form factors, our LED point drivers provide further customization via wide operating windows. Additionally,almost all drivers feature the following specifications: SELV, improved ripple current, temperature derating, hot wiring, – providing OEMs thetools to produce, and even alter later if necessary, premium downlights and spotlights.
Benefits• High reliability underpinned by 5 year
warranty • Future-proof flexibility -application-oriented operatingwindows enable LED generation andcomplexity management • Compatibility - can also be used forother manufacturers' modules orOEMs' own PCB designs
Features• Operating windows - output current can be adjusted
via the Philips MultiOne configurator ('TD' drivers) orwith a resistor outside the driver or SimpleSet • Power ratings: 10-75W • Choice of housing designs -linear housing for tracks in'3 in 1' in design, conventional HID housings for downand Spotlighting and WH housing for independent usewith strain relief and loop through
Application• Retail• Office
April 2018
Electrical input data
Specification item Value Unit ConditionRated input voltage range 220...240 Vac Performance range
Rated input voltage 230 Vac
Rated input frequency range 50...60 Hz Performance range
Rated input current 0.19 A @ rated output power @ rated input voltage
Rated input power 44 W @ rated output power @ rated input voltage
Power factor ≥ 0.9 @ performance range
Total harmonic distortion ≤ 20 % @ performance range
Efficiency ≥ 89 % @ rated output power @ rated input voltage
Rated input voltage DC range 186...250 Vdc Performance range
Rated input current DC range ≤ 0.24 Adc Performance range
Input voltage AC range 202...254 Vac Operational range
Input frequency AC range 47.5...63 Hz Operational range
Input voltage DC range 168...275 Vdc Operational range
Isolation input to output SELV
Electrical output data
Specification item Value Unit ConditionRegulation method Constant Current
Output voltage 24...54 Vdc
Output voltage max. 60 V Peak voltage at open load
Output current 0.3...1.05 A Full output current setting
Output current tolerance ± 5 %
Output current ripple LF ≤ 4 % Ripple = peak / average
Output power 11...37 W Full output
Electrical data controls input
Specification item Value Unit ConditionControl method DALI, TD
Dimming range 1...100 % Default range
Galvanic Isolation Basic
Logistical data
Specification item ValueProduct name Xitanium 36W WH 0.3-1A 54V TD/Is 230V
Order code 8718696515587
Logistic code 12NC 9290 009 69906
EAN3 8718696515594
Pieces per box 20
2 / 8 Xitanium 36W WH 0.3-1A 54V TD/Is 230V April 2018
Wiring & Connections
Specification item Value Unit ConditionInput wire cross-section 0.2...1.5 mm2 WAGO250 (3.5 mm), solid / stranded wire
16...24 AWG WAGO250 (3.5 mm), solid / stranded wire
Input wire strip length 8.5...9.5 mm
Input wire cross-section 0.5...2.5 mm2 WAGO804, solid / stranded wire
14...20 AWG WAGO804, solid / stranded wire
Input wire strip length 10...11 mm
Output wire cross-section 0.2...1.5 mm2 WAGO250 (3.5 mm), solid / stranded wire
16...24 AWG WAGO250 (3.5 mm), solid / stranded wire
Output wire strip length 8.5...9.5 mm
Maximum cable length 600 mm Total length of wiring including LED module, one way
Insulation
Insulation input output DALIinput SELV Basic
output SELV SELV
DALI Basic SELV
3 / 8 Xitanium 36W WH 0.3-1A 54V TD/Is 230V April 2018
Dimensions and weight
Specification item Value Unit ConditionLength (A1) 200 mm
Width (B1) 74.2 mm
Height (C1) 32 mm
Weight 204 gram
Operational temperatures and humidity
Specification item Value Unit ConditionAmbient temperature -20...+65 ºC Higher ambient temperature allowed as long as Tcase-max is not
exceeded.
Tcase-max 85 ºC Maximum temperature measured at Tcase-point
Tcase-life 75 ºC Measured at Tcase-point
Maximum housing temperature 110 ºC In case of a failure
Relative humidity 10...90 % Non-condensing
Storage temperature and humidity
Specification item Value Unit ConditionAmbient temperature -25...+85 ºC
Relative humidity 5...95 % Non-condensing
4 / 8 Xitanium 36W WH 0.3-1A 54V TD/Is 230V April 2018
Lifetime
Specification item Value Unit ConditionDriver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life.
Maximum failures = 10%
Programmable features
Specification item Value Remark ConditionSet output current (AOC) Programmable, SimpleSet See Design-in guide. Default output current: = 300 mA
Constant Lumen Over Lifetime (CLO) Yes
DC emergency dimming (DCemDIM) Yes output power to 15%
Corridor mode Yes See Design-in guide Default: T1=55s, T2=12s, T3=30min
Energy metering Yes
Diagnostics Yes
Features
Specification item Value Remark ConditionOpen load protection Yes Automatic recovering
Short circuit protection Yes Automatic recovering
Over power protection Yes Automatic recovering
Hot wiring Yes
Suitable for fixtures with protection class I and II per IEC60598
Certificates and standards
Specification item ValueApproval marks CE / ENEC / KC
Ingress Protection classification (IP) 20
5 / 8 Xitanium 36W WH 0.3-1A 54V TD/Is 230V April 2018
Inrush current
Specification item Value Unit ConditionInrush current Ipeak 20.4 A Input voltage 230V
Inrush current Twidth 195 µs Input voltage 230V, measured at 50% Ipeak
Drivers / MCB 16A type B ≤ 32 pcs
MCB Rating Relative number of LED driversB 10A 63%
B 13A 81%
B 16A 100% (stated in datasheet)
B 20A 125%
B 25A 156%
C 10A 104%
C 13A 135%
C 16A 170%
C 20A 208%
C 25A 260%
Driver touch current / protective conductor current
Specification item Value Unit ConditionTypical touch current (ins. Class II) < 0.7 mA peak Acc. IEC61347-1. LED module contribution not included
Surge immunity
Specification item Value Unit ConditionMains surge immunity (diff. mode) 1 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Mains surge immunity (comm. mode) 2 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
Control surge immunity (diff. mode) 1 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Control surge immunity (comm. mode) 2 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
Additional information
Specification item Default setting Remark ConditionAOC 300 mA
6 / 8 Xitanium 36W WH 0.3-1A 54V TD/Is 230V April 2018
Graphs
Operating window
Power factor versus output power
Efficiency versus output power
7 / 8 Xitanium 36W WH 0.3-1A 54V TD/Is 230V April 2018
THD versus output power
Notes
This product includes software licensed under terms that require Philips Lighting Holding B.V. to display the following notice:
ASF: Release ASF-3.32The Atmel® Software Framework (ASF, www.atmel.com/asf) is a compilation of embedded software for Atmel flash MCUs: megaAVR®, AVR XMEGA®, AVR UC3 and SAM devices.It has been designed to help develop and glue together the different components of a software design. It can easily integrate into an operating system (OS) or run as astand-alone product.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materialsprovided with the distribution.3. The name of Atmel may not be used to endorse or promote products derived from this software without specific prior written permission.4. This software may only be redistributed and used in connection with an Atmel microcontroller product.THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE EXPRESSLY ANDSPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTEGOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCHDAMAGE.
©2018 Philips Lighting Holding B.V. All rights reserved.
This document contains information relating to the Philips Lighting portfolio, intended for companies who may be interested in developing theirproduct offering. Note that the information provided is subject to change. Philips Lighting does not give any representation or warranty as to theaccuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented inthis document is not intended as any commercial offer and does not form part of any quotation or contract.
Date of release: April 30, 2018 v2
www.philips.com/technology
Recommended