View
218
Download
0
Category
Preview:
Citation preview
Able's in-house specialized services
bring industry leading capabilities
under one roof, allowing us to
maximize quality while reducing cost
and delivery time.
Robotic Shot Peen
Mobile Mobile On-Site Services Available
WORLD CLASS SPECIALIZED
SERVICES
ADVANCED ROBOTIC
SHOT PEEN
ADVANCED ROBOTIC SHOT PEENWorld Class Specialized Services
Able Aerospace Services | 7706 E. Velocity Way | Mesa, AZ 85212 | 602.304.1227 | ableengineering.com
ADVANCED ROBOTIC SHOTPEEN CAPABILITIES
WHAT IS SHOT PEENING
SHOT SIZESSPECIFICATIONSCCW-14 CCW-20 CCW-28 CCW-35 *per AMS2431/8
AMS 2430 AMS2432BAC5730 AMS-S-13165
EXAMPLES OF PARTS THAT CAN BENEFIT FROM SHOT PEENINGAircraft wheels Coil springs Compressor airfoil and roots Compressor disks Connecting rods Crankshafts Fatigue sensitive helicopter components Landing gear Leaf springs Ring and pinion gears Spur gears Turbine disks
Shot peening is a metal working process which enhances the surfaces of a variety of di�erent materials.
Various manufacturing processes used throughout the aerospace, aircraft, automotive, energy, and heavy equipment industries can produce tensile stresses on the surface of components. These processes include milling, turning, drilling, welding, severe grinding, heat treating, bending, and forming. The tensile stress left behind on the surface provides a perfect environment for a cracking to start forming, reducing the life of these components.
Shot peening is performed by accelerating spherical media toward the surface of a part. When the media hits the part, a small dent is formed, stretching the surface of the part. The material surrounding that dent resists this, and creates an area of compressive stress. When the surface of the part has these small dents all over the surface, there is a continuous layer of compressive stress on the surface of the part. This replaces the tensile stress on the surface with a compressive layer. The compressive layer stops the fatigue cracks and stress corrosion that typically start at the surface of the part.
Robotic Shot Peen (7Axis)
Manual Shot Peen
Rotary Lance
Several Shot Media Sizes
ID/OD
Flap Peen
ADVANCED ROBOTIC
SHOT PEEN
Recommended