View
22
Download
0
Category
Preview:
Citation preview
75
CALIPERS
Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
Workshop Vernier Caliper 100 Series
FeaturesStandard DIN 862
• Standard workshop model with locking screw
• 4-way measurement
• Made of hardened alloyed stainless steel
• Chromed scale with engraved graduations
• Measuring surface is micro-lapped
• Packed in plastic box
WORKSHOP VERNIER CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) Dimn – A Dimn – BMW100-15B 0-150 0-6 0.05 1/128 40 16MW100-20B 0-200 0-8 0.05 1/128 50 20MW100-30B 0-300 0-12 0.05 1/128 55 20MW100-15BI 0-150 0-6 0.02 0.001 40 16MW100-20BI 0-200 0-8 0.02 0.001 50 20MW100-30BI 0-300 0-12 0.02 0.001 55 20
Large Workshop Vernier Caliper 150 Series
FeaturesStandard: Factory Standard
• Standard workshop model with locking screw
• Mono block solid slider
• Made of hardened alloyed stainless steel
• Jaws for internal and external measurement
• Chromed scale with laser engraved graduations
• Measuring surface is micro-lapped
• With fine adjustment
• Packed in wooden box
LARGE WORKSHOP VERNIER CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) Dimn – A Dimn – B Dimn – CMW150-52 0-500 0-20 0.02 0.001 100 12 5MW150-55 0-500 0-20 0.05 1/128 100 12 5MW150-62 0-600 0-24 0.02 0.001 100 12 5MW150-65 0-600 0-24 0.05 1/128 100 12 5MW150-72 0-1000 0-40 0.02 0.001 125 18 10MW150-75 0-1000 0-40 0.05 1/128 125 18 10MW150-82 0-1500 0-60 0.02 0.001 150 18 10MW150-85 0-1500 0-60 0.05 1/128 150 18 10
76 For more information visit www.bowersgroup.co.uk
Vernier Calipers
Features• Stainless steel monoblock design
• Satin chrome finish on scale faces
• Clearly defined laser engraved graduations
• Includes depth rod
• Knife edge internal jaws
• Knife edge tips on external jaws
• Economical design for general workshop use
Moore & Wright Vernier Calipers are manufactured to the DIN 862 standard from high quality materials and combine good traditional design at a reasonable price. In addition to our standard range of vernier calipers, we are able to offer a wide range of non-standard designs.
Comply with: DIN 862.
VERNIER CALIPERCode No Resolution (mm) Resolution (inch) Range (mm) Range (inch) JawsVCL-015D 0.05 0.001 150 6 40mmVCT-015D 0.02 0.001 150 6 40mm
CALIPERS
Dial Caliper 140 Series
FeaturesStandard: Factory Standard
• Thumb wheel for fine adjustment
• Rack cover prevents dust or grit fouling teeth of rack
• High precision model with mono block solid slider
• 4-way measurement
• Made of alloyed hardened stainless steel
• Chromed scale with engraved graduations
• Measuring surface is micro-lapped
• Black indicator plate with clear red pointer
DIAL CALIPERCode No Range (mm) Resolution (mm) JawsMW140-15 0-150 0.02 40mmMW140-20 0-200 0.02 55mmMW140-30 0-300 0.02 55mm
77
CALIPERS
Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
Dial Caliper 141 Series
FeaturesStandard: DIN 862
• Thumb wheel for fine adjustment
• Covered rack
• 4-way measurement
• Hardened stainless steel rack
• Measuring surface is micro-lapped
DIAL CALIPERCode No Range (mm) Resolution (mm) Code No Range (inch) Resolution (inch)MW141-15 0-150 0.02 MW141-15I 0-6 0.001
Dial Caliper 142 Series
FeaturesStandard: DIN 862
• Shockproof dial caliper
• Thumb wheel for fine adjustment
• Covered rack
• 4-way measurement
• Hardened stainless steel rack
• Measuring surface is micro-lapped
DIAL CALIPERCode No Range (mm) Resolution (mm)MW142-15 0-150 0.02MW142-20 0-200 0.02MW142-30 0-300 0.02
78 For more information visit www.bowersgroup.co.uk
CALIPERS
Plastic Dial Caliper
FeaturesStandard: Factory Standard
• Manufactured from glass reinforced nylon material
• Highly durable design
• ± 0.1mm / ± 0.004" accuracy
• Plastic depth rod
CDP150M
Plastic Digital Caliper
Features• Manufactured from glass reinforced
nylon material
• Highly durable design
• Accuracy 0.05mm/0.002"
• Plastic depth rod
• Functions: mm/inch, zero setting, auto off
IMPERIAL: DIAL CALIPERCode No Range (inch) Resolution (inch) JawsCDP006E 0-6 0.01 1.57"
METRIC: DIAL CALIPERCode No Range (mm) Resolution (mm) JawsCDP150M 0-150 0.1 40mm
METRIC / IMPERIAL: DIGITAL CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) JawsECP015D 0-150 0-6 0.01 0.0005 40mm
79Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
Polycarbonate Digital Caliper
FeaturesStandard: Factory Standard
• Polycarbonate frame
• 4-way measurement
• Accuracy +/- 0.2mm / 0.008"
• Functions: mm/inch, zero setting, Absolute/Incremental measurement
• Supplied retail packed with vinyl pouch
• CR2032 battery
POLYCARBONATE DIGITAL CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) JawsMW110-15DPC 0-150 0-6 0.01 0.0005 40mm
CALIPERS
Workshop Digital Caliper 110-DBL Series
FeaturesStandard: DIN 862
• On/off switch
• Zero point at any position
• Displays values in mm and inch
• All metal parts made of hardened stainless steel
• CR2032 battery
• ABS / INC measurement
• Thumb wheel for fine adjustment
• Auto off function
• 4-way measurement
WORKSHOP DIGITAL CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) JawsMW110-15DBL 0-150 0-6 0.01 0.0005 40mmMW110-20DBL 0-200 0-8 0.01 0.0005 50mmMW110-30DBL 0-300 0-12 0.01 0.0005 60mm
80
CALIPERS
For more information visit www.bowersgroup.co.uk
THREE READING DIGITAL CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) JawsMW110-15DFC 0-150 0-6 0.01 0.0005 / 1/128 40mmMW110-20DFC 0-200 0-8 0.01 0.0005 / 1/128 50mmMW110-30DFC 0-300 0-12 0.01 0.0005 / 1/128 60mm
Three Reading Digital Caliper DFC SeriesFeatures• Extra large, easy-to-read display
• High measuring speed: 120" per second
• Read and convert in inch, metric and fractions
• Stainless steel frame with extra smooth movements
• CR2032 battery
• Thumb wheel for fine adjustment
• 4-way measurement
METRIC INCH
FRACTION
FeaturesStandard: DIN 862
• Water and dust resistant to IP54 specification
• Functions: mm/inch conversion, on/off, zero setting
• Patented ceramic capacitive sensor
• Thumb wheel for fine adjustment
• CR2032 battery
• ABS / INC measurement
• 4-way measurement
Water Resistant Caliper IP54 Series
WATER RESISTANT CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) JawsMW110-15WR 0-150 0-6 0.01 0.0005 40mmMW110-20WR 0-200 0-8 0.01 0.0005 50mmMW110-30WR 0-300 0-12 0.01 0.0005 60mm
Features• Absolute Measuring System
• RS232 Digimatic output
• CR2032 Battery
• 4-way measurement
• Functions: mm/Inch conversion, on/off, data-output
• Thumb wheel for fine adjustment
Digital Absolute Caliper 110-DABS Series
DIGITAL ABSOLUTE CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) Accuracy (mm) Accuracy (inch)MW110-15DABS 0-150 0-6 0.01 0.0005 +/-.020 +/-.001MW110-20DABS 0-200 0-8 0.01 0.0005 +/-.030 +/-.0015MW110-30DABS 0-300 0-12 0.01 0.0005 +/-.030 +/-.0015
DATA CABLECode No DescriptionMW-Y100/700USB Data Cable-USB to suit all DABS products
81Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
CALIPERS
Sylvac S_Cal ONE Workshop Caliper
Sylvac S_Cal WORK Workshop Caliper
Features• Mechanical frame in stainless steel
• Swiss measuring system
• Large digits (9.6mm)
• Simple and intuitive functions
• Thumb wheel on request (see below)
Features• Mechanical frame in
stainless steel
• Automatic switch off mode
• Thumb wheel on request (see below)
Swiss Precision
SYLVAC S_CAL ONE WORKSHOP CALIPERCode No Description Range (mm) Note30-910-2502 S_Cal ONE 0-150 Flat depth rod30-910-2507 S_Cal ONE 0-150 Round depth rod
ACCESSORIESCode No Description30-910-2202 Thumbwheel for S_Cal ONE30-910-2201 Thumbwheel for S_Cal PRO
and S_Cal PRO μm
Code No Description30-926-6721 Sylvac Proximity USB*25-604-064 Wireless Proximity Module*Other data cable options available.
Code No Description Note30-810-2201 Thumbwheel for S_Cal WORK Suits: S_Cal WORK30-910-2205 Base for depth measurement
- 76mm / 3"Suits: S_Cal PRO, S_Cal WORK, S_Cal ONE, S_Cal EVO
SYLVAC S_CAL WORK CALIPERCode No Description Range (mm) Note30-910-0502 Sylvac S_Cal WORK 0-150 Depth rod: 4 x 1.430-910-0507 Sylvac S_Cal WORK 0-150 Depth rod: Ø 1.530-910-0522 Sylvac S_Cal WORK 0-200 Depth rod: 4 x 1.430-910-0532 Sylvac S_Cal WORK 0-300 No depth rod
Option
Option
Sylvac S_Cal PRO CaliperFeatures• Automatic
stand-by mode
• Origin saved
• Automatic wake-up by motion of the slider
• Increased self-contained use (12,000 working hours)
• Thumb wheel on request (see below)
SYLVAC S_CAL PRO CALIPERCode No Description Range (mm) Note30-910-1502 S_Cal PRO IP67 caliper 0-150 Flat depth rod (4 x 1.4)30-910-1507 S_Cal PRO IP67 caliper 0-150 Round depth rod (Ø 1.5mm)30-910-1522 S_Cal PRO IP67 caliper 0-200 Flat depth rod (4 x 1.4)30-910-1532 S_Cal PRO IP67 caliper 0-300 No depth rod
Sylvac S_Cal PRO Micron CaliperFeatures• Automatic wake-up
• Sleeping mode after 20 min. of no use
• Mechanical frame in stainless steel
• Improved parallelism of internal jaws
• Preset
• Resolution 0.001 or 0.00005"
• 4μm repeatability
SYLVAC S_CAL PRO MICRON CALIPERCode No Description Range (mm) Note30-910-9502 S_Cal PRO Micron Caliper 0-150 Flat depth rod (4 x 1.4)30-910-9507 S_Cal PRO Micron Caliper 0-150 Round depth rod (Ø 1.5)
Swiss Precision
Swiss Precision
OptionSwiss Precision
• Thumb wheel on request (see below)
82 For more information visit www.bowersgroup.co.uk
Swiss Precision
Swiss Precision
Swiss Precision
CALIPERS
Sylvac S_Cal EVO Caliper
Sylvac S_Cal EVO Bluetooth Caliper
Sylvac S_Cal EVO Carbide and EVO μm Calipers
Features• Max. error 20 μm
• IP67 protected
• No output
• Absolute system
• Automatic wake-up
• Powered by standard CR2032 battery
• Battery life up to 3 years
Features• Max. error 20 μm
• IP67 protected
• Built-in Bluetooth® 4.0 transmitter
• Transmission distance up to 15m.
• Absolute system
• Automatic wake-up
• Powered by standard CR2032 battery
• Battery life up to 3 years
• Mechanical frame in stainless steel
Features• Integrated Bluetooth® Smart data
transmission (depending on model)
• New extra-large display
• Programmable button according to needs (depending on model)
• Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529
• Automatic wake-up by moving the electronic on his frame (Absolute System SIS)
• Sleeping mode after 20 min. of no use. (Absolute System SIS)
• Maximum speed of displacement: 2.5 m/sec
• Mechanical frame in stainless steel
SYLVAC S_CAL EVO CALIPERCode No Description Range (mm) Note30-810-1502/NO Sylvac S_Cal EVO 0-150 With flat depth rod30-810-1522/NO Sylvac S_Cal EVO 0-200 With flat depth rod
SYLVAC S_CAL EVO BLUETOOTH CALIPERCode No Description Range (mm) Note30-810-1506 Sylvac S_Cal EVO Bluetooth 0-150 With flat depth rod30-810-1516 Sylvac S_Cal EVO Bluetooth 0-150 With round depth rod30-810-1526 Sylvac S_Cal EVO Bluetooth 0-200 With flat depth rod30-810-1536 Sylvac S_Cal EVO Bluetooth 0-300 Without depth rod
SYLVAC S_CAL EVO CARBIDE CALIPERCode No Description Range (mm) Note30-810-1509 Sylvac S_Cal EVO Carbide Caliper 0-150 With flat depth rod
SYLVAC S_CAL EVO μM CALIPERCode No Description Range (mm) Note30-810-9506 Sylvac S_Cal EVO μm Caliper 0-150 With flat depth rod
Option
Option
30-810-1509 – with Carbide jaws
30-810-9506
83
CALIPERS
Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
Swiss Precision
Swiss Precision
Swiss Precision
Swiss Precision
Sylvac S_Cal EVO SVE Special Caliper
Sylvac S_Cal EVO SVL Special Caliper
Sylvac S_Cal EVO SVI Special Caliper
Sylvac S_Cal EVO SVR Special Caliper
Features• Special jaws for measuring
grooves and external seatings
Features• Special long internal jaws
for deep measurement
Features• Special jaws for measuring
grooves and internal seatings
Features• Special jaws for measuring
grooves and internal seatings, with interchangeable, lapped, round-tipped anvils (M2.5 thread)
• Other accessories available on request
SYLVAC S_CAL EVO SVE SPECIAL CALIPERCode No Description Range (mm) Note30-810-1602 Sylvac S_Cal EVO SVE Special Caliper 0-150 With flat depth rod
SYLVAC S_CAL EVO SVL SPECIAL CALIPERCode No Description Range (mm) Note30-810-1603 Sylvac S_Cal EVO SVL Special Caliper 0-150 With flat depth rod
SYLVAC S_CAL EVO SVI SPECIAL CALIPERCode No Description Range (mm) Note30-810-1600 Sylvac S_Cal EVO SVI Special Caliper 0-150 With flat depth rod
SYLVAC S_CAL EVO SVR SPECIAL CALIPERCode No Description Range (mm) Note30-810-1601 Sylvac S_Cal EVO SVR Special Caliper 0-150 With flat depth rod
84
CALIPERS
For more information visit www.bowersgroup.co.uk
OptionSwiss Precision
Sylvac Ultra Light Caliper Mark 4
Features• Integrated Bluetooth Smart data transmission
• Adjustable jaws
• Maximum speed of displacement: 2 m/sec
• Internal and external measurement
• This system ensures a perfect guidance and protects the beam against shocks
SYLVAC ULTRA LIGHT CALIPER MARK 4Code No Range (mm) Maximum Error (μm) Repeatability (μm) Force Weight30-811-1404 0-400 30 20 5-10N 1.5kg30-811-1406 0-600 40 20 5-10N 1.6kg30-811-1410 0-1000 50 20 5-10N 1.9kg30-811-1415 0-1500 90 20 5-10N 2.3kg30-811-1420 0-2000 120 20 5-10N 2.6kg30-811-1425 0-2500 150 30 5-10N 2.9kg30-811-1430 0-3000 200 20 5-10N 3.3kg
dep
th
TECHNICAL SPECIFICATION
Dimensions 30-811-1404 30-811-1406 30-811-1410 30-811-1415 30-811-1420 30-811-1425 30-811-1430 A (mm) 0-478 0-683 0-1093 0-1608 0-2123 0-2638 0-3153 C (mm) 27-505 27-710 27-1110 27-1635 27-2150 27-2665 27-3180 B (mm) 796 1001 1411 1926 2441 2956 3471
• Displays the upper and lower tolerances
• Extremely light instrument
• IP67 protection
85Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
Option
Option
Swiss Precision
Swiss Precision
SYLVAC ULTRA LIGHT DEPTH GAUGECode No Range (mm) Maximum Error (μm) Repeatability (μm)30-811-6100 0-1000 100 2030-811-6150 0-1500 130 20
SYLVAC ULTRA LIGHT DIGITAL SCALECode No Range (mm) Maximum Error (μm) Repeatability (μm)30-814-1510 0-1000 60 2030-814-1515 0-1500 90 2030-814-1520 0-2000 120 2030-814-1525 0-2500 150 2030-814-1530 0-3000 200 20
CALIPERS
TECHNICAL SPECIFICATION
Dimensions 30-811-6100 30-811-6150 A (mm) 0-1030 0-1545 C (mm) 400/600 400/600 B (mm) 1242 1757
TECHNICAL SPECIFICATION
Dimensions 30-814-1510 30-814-1515 30-814-1520 30-814-1525 30-814-1530 A (mm) 0-1120 0-1620 0-2120 0-2620 0-3120 B (mm) 1306 1806 2306 2806 3306
Sylvac Ultra Light Depth Gauge
Sylvac Ultra Light Digital Scale
A (course)
B
153 153500
23
10
20
38
170
60
40
25
25
Nb rangées de trous(voir tableau)
5.5
3x M3 + 2x M4
3x M3 + 2x M4
2x M3
86
CALIPERS
For more information visit www.bowersgroup.co.uk
Sylvac Ultra Light Caliper Mark 4 - Special Application - Jaws Type A
Features• Integrated Bluetooth Smart data transmission
• Mobile jaws
• Maximum speed of displacement: 2 m/sec
• Internal and external measurement
• This system ensures a perfect guidance and protects the beam against shocks
• Displays the upper and lower tolerances
• Extremely light instrument
• IP67 protection
OptionSwiss Precision
SPECIAL APPLICATION - JAWS TYPE A
Code No Jaws30-811-2316-99 L = 300mm,
M = L - 75mm30-811-2317-99 L = 400mm,
M = L - 75mm
TECHNICAL SPECIFICATION
Max error (um) / Repeatability (um) UL Specification UL400 UL600 UL1000 UL1500 UL2000 UL2500 UL3000 With jaws 30-811-2316-99 40/20 50/20 70/20 130/30 180/40 220/40 320/40 With jaws 30-811-2317-99 70/40 80/40 120/40 200/50 300/60 400/70 500/80 Measuring range (mm) 400 600 1000 1500 2000 2500 3000 B (mm) 796 1001 1411 1926 2441 2956 3471
87
CALIPERS
Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
Sylvac Ultra Light Caliper Mark 4 - Special Application - Jaws Type C
Features• Integrated Bluetooth Smart data transmission
• Mobile jaws
• Maximum speed of displacement: 2 m/sec
• Internal and external measurement
• This system ensures a perfect guidance and protects the beam against shocks
• Displays the upper and lower tolerances
• Extremely light instrument
• IP67 protection
OptionSwiss Precision
SPECIAL APPLICATION - JAWS TYPE C
Code No Jaws30-811-2319-99 L = 300mm,
M = L - 75mm
TECHNICAL SPECIFICATION
Max error (um) / Repeatability (um) UL Specification UL400 UL600 UL1000 UL1500 UL2000 UL2500 UL3000 With jaws 200 40/20 50/20 70/30 120/30 170/30 210/30 300/40 With jaws 300 50/30 60/30 90/30 150/30 200/40 300/40 400/50 Measuring range (mm) 400 600 1000 1500 2000 2500 3000 B (mm) 796 1001 1411 1926 2441 2956 3471
88
CALIPERS
For more information visit www.bowersgroup.co.uk
Digital Long Jaw Caliper 110-DLJ Series
FeaturesStandard: Factory Standard
• Heavy duty design
• Long jaws with internal measuring nibs
• Ground micro-lapped measuring surfaces
• With fine adjustment
• Functions: mm / inch conversion, on/off, zero-setting, ABS / zero, battery low indication
DIGITAL LONG JAW CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) Jaws Internal NibsMW110-15DLJ 0-150 0-6 0.01 0.0005 60mm 10 x 5mm
Large Digital Workshop Caliper 150 Series
FeaturesStandard: Factory Standard
• Ground micro-lapped measuring surfaces
• Functions: mm / inch conversion, on/off, data-output, zero-setting, ABS / zero, battery low indication
• With fine adjustment
• Long jaws with internal measuring nibs
LARGE DIGITAL WORKSHOP CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) Jaws Internal NibsMW150-50DDL 0-500 0-20 0.01 0.0005 100mm 18 x 10mmMW150-60DDL 0-600 0-24 0.01 0.0005 100mm 24 x 10mmMW150-75DDL 0-1000 0-40 0.01 0.0005 125mm 24 x 10mm
89Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
Heavy Duty Digital Workshop Caliper 160-D Series
Long Jaw Heavy Duty Digital Workshop Caliper 160-D Series
Features• Heavy duty design
• Internal measuring nibs on external jaws and knife edge external jaws
• Ground micro-lapped measuring surfaces
• Functions: mm / inch conversion, on/off, zero-setting, ABS / zero, battery low indication
• With fine adjustment
Features• Heavy duty design
• Internal measuring nibs on external jaws and knife edge external jaws
• ‘Soft keys’ for maximum operating comfort
• Easy to read LCD display
• Ground micro-lapped measuring surfaces
• Functions: mm / inch conversion, on/off, zero-setting, ABS / zero, battery low indication
• Fine adjustment
HEAVY DUTY DIGITAL WORKSHOP CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) Jaws External Knife Edge Internal NibsMW160-20D 0-200 0-8 0.01 0.0005 60mm 12mm 33.5 x 5mmMW160-30D 0-300 0-12 0.01 0.0005 60mm 12mm 38 x 5mm
LONG JAW HEAVY DUTY DIGITAL WORKSHOP CALIPERCode No Range (mm) Range (inch) Resolution (mm) Resolution (inch) Jaws External Knife Edge Internal NibsMW160-50D 0-500 0-20 0.01 0. 0005 150mm 18mm 50 x 10mm
CALIPERS
90 For more information visit www.bowersgroup.co.uk
OptionSwiss Precision
Sylvac S_Scale Work Horizontal / Vertical Digital Scales
Features• Max speed displacement: 2 m/sec
• RS232 or USB data output
• External power supply option by power cable
• Easy to integrate in to existing projects
• Selection of measuring direction
• PRESET function
• 2 references
SYLVAC S_SCALE WORK DIGITAL SCALESCode No Range (mm) Description Maximum Error (μm) Repeatability (μm) Resolution (mm) Output30-816-1015 150 H / V 20 10 0.01 USB / RS232 / Digimatic / Wireless30-816-1020 200 H / V 20 10 0.01 USB / RS232 / Digimatic / Wireless30-816-1030 300 H / V 30 10 0.01 USB / RS232 / Digimatic / Wireless30-816-1060 600 H / V 30 10 0.01 USB / RS232 / Digimatic / Wireless
Beam in stainless steel, hardened and ground
Steel carriage Rotating display 270º
Digital display LCD Height of digits 6mm
Clamping device supplied as standard
+1-1
+1-1
52.5
106
15
47.5
29.2
M4
M4
70
Ø44
Ø44
8
26
13.5
205
B
22
C
6.2
A (course)
CALIPERS
91Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
CALIPERS
Internal / External CalipersExternal
METRIC - EXTERNAL CALIPERS
Code No Range (mm) Resolution (mm)Leg Length (mm)
Groove Depth (mm)
12-D110 0-10 0.005 35 1212-D220 0-20 0.01 81 1212-D450 0.50 0.05 167 12
IMPERIAL - EXTERNAL CALIPERS
Code No Range (inch) Resolution (inch)Leg Length (inch)
Groove Depth (inch)
12-D610 0-0.4 0.0002 1.37 0.4712-D720 0-0.8 0.0005 3.2 0.4712-D950 0-2 0.001 6.57 0.47* See Data sheet for full detailSpecial application or other ranges available upon requestDigital versions available upon requestData Transmission:USB Cable - 12-1961-09Adaptor - 12-2482-05NB both parts required These calipers are supplied as standard in cardboard cartons. Wooden cases are available upon request at extra cost.
12-D110
12-D450
12-D220
12-C220
92 For more information visit www.bowersgroup.co.uk
CALIPERS
Internal / External CalipersInternal
METRIC - INTERNAL CALIPERS
Code No Range (mm) Resolution (mm)Leg Length (mm)
Groove Depth (mm)
12-H105 5-15 0.005 35 2.512-H210 10-30 0.01 85 5.412-H220 20-40 0.01 85 7.312-H230 30-50 0.01 85 7.312-H240 40-60 0.01 85 8.512-H250 50-70 0.01 85 8.512-H2M50 50-100** 0.01 85 8.512-H2M90 90-140** 0.01 85 8.512-H2M130 130-180** 0.01 85 8.5
IMPERIAL - INTERNAL CALIPERS
Code No Range (inch) Resolution (inch)Leg Length (inch)
Groove Depth (inch)
12-H602 0.1-0.5 0.0002 1.37 0.0412-H710 0.4-1.2 0.0005 3.3 0.2112-H720 0.8-1.6 0.0005 3.3 0.2912-H730 1.2-2.0 0.0005 3.3 0.2912-H740 1.6-2.4 0.0005 3.3 0.3312-H750 2.0-2.8 0.0005 3.3 0.3312-H7M50 2.0-4.0** 0.0005 3.3 0.3312-H7M90 3.6-5.6** 0.0005 3.3 0.3312-H7M130 5.2-7.2** 0.0005 3.3 0.33* See Data sheet for full detail** Using interchangeable anvilsDigital versions available upon requestThese calipers are supplied as standard in cardboard cartons. Wooden cases are available upon request at extra cost
12-H105
12-H2M50
12-H210
12-G220
93
CALIPERS
Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
Internal / External Calipers - Applications
CALIPER APPLICATIONSCode No Description Range12-G4100 Internal Measurement up to 120mm12-G850 Internal Measurement up to 120mm12-H4100 Internal Measurement up to 120mm12-H870 Internal Measurement up to 120mm12-ID80200 Internal Measurement up to 120mm12-C450 External Measurement up to 200mm12-C8100 External Measurement up to 200mm
12-G4100
12-C8100
12-C330T
12-H870
12-D450F
12-POCO2T
Code No Description Range12-D450F External Measurement up to 200mm12-OD60100BJ External Measurement up to 200mm12-C110T Foamed Materials and Foils Measurement up to 100mm12-C330T Foamed Materials and Foils Measurement up to 100mm12-D220T Foamed Materials and Foils Measurement up to 100mm12-D450T Foamed Materials and Foils Measurement up to 100mm12-POCO2T Foamed Materials and Foils Measurement up to 100mm
Kroeplin internal and external calipers can be used for many special applications. Below are just a few examples; contact our Sales Team for further options.
94 For more information visit www.bowersgroup.co.uk
CALIPERS
Internal Digital Caliper
Features• Large LCD display
• 0.005mm or 0.0002" resolution
• Preset capability
• Direct Inch/Metric conversion
• Absolute/Incremental measurements
Incorporating advanced electronics, these advanced gauges have the benefit of a large digital readout and an auto adjusting analogue display. These gauges are ideally suited for measuring bores, internal grooves and other hard to reach inside dimensions.
External Digital Caliper
Features• Large LCD display
• 0.005mm or 0.0002" resolution
• Preset capability
• Direct Inch/Metric conversion
• Absolute/Incremental measurements
Incorporating advanced electronics, these advanced gauges have the benefit of a large digital readout and an auto adjusting analogue display. These gauges are ideally suited for measuring external grooves and other hard to reach outside dimensions.
INTERNAL DIGITAL CALIPER SPECIFICATION
Range (mm) Range (inch) Dimn – A Dimn – B Dimn – CContact RadiusCode No
MW432-01DC 5-15 0.2-0.6 20.0 1.0 1.5 0.3mmMW432-02DC 10-20 0.4-0.8 25.0 1.5 3.0 0.3mmMW432-03DC 20-30 0.8-1.2 30.0 2.0 6.5 0.5mmMW432-04DC 30-40 1.2-1.6 30.0 2.5 9.0 0.5mmMW432-05DC 40-50 1.6-2.0 30.0 2.5 9.0 0.5mm
EXTERNAL DIGITAL CALIPER SPECIFICATION
Range (mm) Range (inch) Dimn – A Dimn – B Dimn – CContact RadiusCode No
MW442-01DC 0-10 0.2-0.4 40.0 3.0 8.0 0.5mmMW442-02DC 10-20 0.4-0.8 40.0 3.0 8.0 0.5mmMW442-03DC 20-30 0.8-1.2 40.0 3.0 8.0 0.5mmMW442-04DC 30-40 1.2-1.6 40.0 3.0 8.0 0.5mmMW442-05DC 40-50 1.6-2.0 40.0 3.0 8.0 0.5mm
95
CALIPERS
Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
Baty Major Calipers
FeaturesCustom frame designs available for specific applications
An extensive range of dial caliper gauges for measuring external dimensions.
These instruments can be used as direct reading instruments for quick checking of components such as castings prior to machining or for the checking of wall thickness in difficult to measure components such as valve or pump bodies.
Alternatively they can be used as a comparative gauge when set to a measuring standard and the indicator zeroed. When used as a comparative gauge it is generally recognised that a higher standard of accuracy is achieved.
Every major caliper comes fitted with an indicator. These indicators are specially adapted for use on major calipers and are calibrated along with the instrument. Under no circumstances should indicators be interchanged between instruments.
For finer reading options, please contact our sales team.
BATY MAJOR CALIPERS
Code NoApplication Range (mm)
Application Range (inch) Range (mm) Range (inch) Length (mm) Length (inch)
705-I 0.010 0-2 6710-M 0.1 0-50 254710-I 0.010 0-2 10725-M 0.1 0-50 150725-I 0.010 0-2 6730-M 0.1 0-50 254730-I 0.010 0-2 10800-M 0.1 0-50 150800-I 0.010 0-2 6802-M 0.1 0-50 254
96
CALIPERS
For more information visit www.bowersgroup.co.uk
Baty Dial Thickness Gauges
Features• All standard instruments are supplied with 10mm (0.39") diameter flat contacts
• The well balanced frame and handgrip make these thickness gauges very easy to use for the measurement of sheet materials
• The range of throat depths permit measurements to be made across the sheet. The lifting lever and springloaded spindle ensures controlled contact pressure on the work
• Larger anvils available (price on application)
• Range per revolution: 1mm / 0.1"
Baty dial thickness gauges are direct reading instruments for quick and accurate measurement of rod, strip or sheet material.
BATY DIAL THICKNESS GAUGES
Code NoIndicator Range (mm)
Indicator Range (inch)
Capacity (mm)
Capacity (inch) Graduation
Depth (mm)
Depth (inch)
1353 0.01 10 Dial - 0-100 1001356 0.01 25 Dial - 0-100 1001359 0.01 25 Dial - 0-100 20013512 0.01 25 Dial - 0-100 3001351 0.001 0.5 Dial - 0-100 41354 0.001 1 Dial - 0-100 41357 0.001 1 Dial - 0-100 813510 0.001 1 Dial - 0-100 12
BATY DIAL THICKNESS GAUGES
Code NoIndicator Range (mm)
Indicator Range (inch)
Range (mm)
Range (inch)
Capacity (mm)
Capacity (inch) Graduation
Depth (mm)
Depth (inch)
FTM-1 0.01 10 10 Dial - 0-100 30FTM-5 0.01 10 25 Dial - 0-100 50FTI-1 0.001 0.1 0.5 Dial - 0-100 1.2FTI-5 0.001 0.1 1 Dial - 0-100 2FPMP-1 0.1 10 25 Dial - 0-10 50
FPMP-1 FTM-1
97Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision
CALIPERS
EXTERNAL CALIPERS - METRIC
Code No Dimn – A Dimn – BLength (mm)
Resolution (mm)
Range (mm)
TGIC063 55 - 150 0.02 0-50TGEC063 25 55 150 0.02 0-50TGIC064 55 - 150 0.1 0-50TGEC064 25 55 150 0.1 0-50TGIC103 55 - 250 0.02 0-50TGEC103 25 55 250 0.02 0-50TGIC104 55 - 250 0.1 0-50TGEC104 25 55 250 0.1 0-50
EXTERNAL CALIPERS - IMPERIAL
Code No Dimn – A Dimn – BLength (inch)
Resolution (inch)
Range (inch)
TGIC061 55 - 6 0.001 0-2TGEC061 25 55 6 0.001 0-2TGIC062 55 - 6 0.01 0-2TGEC062 25 55 6 0.01 0-2TGIC101 55 - 10 0.001 0-2TGEC101 25 55 10 0.001 0-2TGIC102 55 - 10 0.01 0-2TGEC102 25 55 10 0.01 0-2
Bowers TGM Analogue Major CalipersThe major versions of Bowers TGM calipers include hard wearing carbide contact points as standard. As with other Bowers TGM products, non-standard applications can be quoted against a component drawing.
A
L
BA
LModel TGICExternal caliper allowing clearance over such obstructions as flanges, pipes etc.
Model TGECExternal caliper for use where access is limited.
Bowers TGM Digital Major CalipersDigital Major Calipers have a direct Inch/Metric indicator with switchable resolution 0.01mm / 0.0005". They have zero and preset facility for both absolute and comparative measurement.
A
L
Model TGIC
BA
L
Model TGEC
Features• High contrast digital display
• Switchable resolution
• Zero and preset facility for absolute and comparative readings
• Proximity USB output
• Carbide measuring faces as standard
• Hold function for ease of reading
• Min / max function
EXTERNAL SPECIFICATIONCode No Dimn – A Dimn – B Length (mm) Length (inch) Resolution (mm) Resolution (inch) Range (mm) Range (inch)TGIC060 55 - 150 6 0.02 0.001 0-50 0-2TGEC060 25 55 150 6 0.02 0.001 0-50 0-2TGIC100 55 - 250 10 0.02 0.001 0-50 0-2TGEC100 25 55 250 10 0.02 0.001 0-50 0-2TGIC200 55 - 550 22 0.1 0.005 0-50 0-2TGEC200 25 55 550 22 0.1 0.005 0-50 0-2
Recommended