Winch Manual 12.12.18

BA 6001 - 9,500 LbsBA 6002 - 12,000 Lbs

USER GUIDEPlease read this manual to understand the

installation and operation of this winch.

from

DANGER

DANGER

jewellery

Bearmach.

DANGER

DANGER

DANGER

DANGER

DANGER

DANGER

WINCH SPECIFICATION

BA 6001 - 9500 Lbs BA 6002 - 12000 Lbs

7.Please use only the designated size batteries mentioned above.

For normal self-recovery work,your existing electrical system is adequate. A fully charged battery and proper connections are essential.Run the vehicle engine during winching operation to keep battery charged. Pay close attention to proper electrical cable connection as follows:

1.Long Black Cable (Supplied Separately with Winch) one end connecting to the Winch Terminal ‘A’ and other to the Negative(-) terminal of the Battery.

2.Long Red Cable from Winch connecting to the Positive(+) Terminal of the Battery.

ELECTRICAL CONNECTION WIRELESS REMOTE INSTRUCTION

Turn onPress the button "B" for 5 seconds until the LED lights up.

Turn offPress the button "B" for 5 seconds until the LED lights off.

Button "B"

Attention:The wired remote must not be plugged in / used at the same time as the wireless remote.