Welcome to Yaneng Wind’s rising super power. Appearance FD14-30KW

Welcome to Yaneng

Wind’s rising super power

Appearance

FD14-30KW

Inner structure

Anemometer supply the information of wind speed wind direction to PLC

PLC sends pitch / yawing signal Electric drive pusher for variable pitch Worm wheel for yawing

Hub for 30kw Variable pitch Wind Turbine

hub

30KW Wind Turbine Nacelle Inner sturcture

30kw wind turbine technical parameters

Generator： Type: Asynchronous, 22 poles (11 Pole pairs ) Rating ： 30KW ， 140 rpm ， 500VDC Generator ： Permanent magnet (Nd-Fe-B) 38SH Certificate ： CE Superior grade bearings (NSK,SKF), long-term grease, r

un 30000 hours without maintenance Advantage: electric pitch control

3 bladed, upwind Diameter: 14.0m Swept Area: 154 ㎡

Technology : via foaming Material : Fiberglass reinforced polyester Resin : American Ashland Special paint for wind turbine blade Protective film Vacumme infusion without bubble, high

strength, light weight

FD14-30kw Blade

Operational Data &Protection Mode：

Start-up wind speed: 2.5m/s Rated wind speed : 9m/s Cut-out wind speed: 35m/s Survival wind speed: 50m/s

Yaw Dumpload Manual/Automatic Feathering propeller Electromagnetic Brake Blade position sensor Temperature sensor Double proximity switches

Active electric pitch control Controller SIEMENS PLC ADSL remote control RS485 Interface SIEMENS touch screen interface New function : The controller can drive the inver

ter by an analog frequency signal , it can match Power One TRIO inverter.

Free Stand Tower

Material : Q235/Q345 Surface treatment : hot dipped galvanizing Professional drawings and Stress analysis

Package

FD14-30KW Output Curve

FD14-30KW Wind Turbine

Wind Speed （ m/s) RPM ( r/min ) Output power (kw)

3 36 0.84

4 48 1.99

5 60 3.889

6 72 6.72

7 84 10.672

8 96 15.93

9 108 22.682

10 120 30

11 120 30

12 120 30

13 120 30

14 120 30

15 120 30

16 120 30

Projects in Silicy Island

Projects in Silicy Island

Projects in Livorno, Italy

Projects in Sicily, Italy