Walking-Working Surfaces and Fall Protection

Walking-Working Surfaces and Fall Protection

MODULE 9

2 ©2006 TEEX

29 CFR 1910 and 29 CFR 1926

Construction work = construction, alteration, and/or repair

1910 Subpart D = Walking-Working Surfaces

1926 Subpart M = Fall Protection for construction

Protect against recognized hazards

3 ©2006 TEEX

Fall Hazards on Oil and Gas Well Sites

4 ©2006 TEEX

Fall Hazards on Oil and Gas Well Sites

5 ©2006 TEEX

Fall Hazards on Oil and Gas Well Sites

6 ©2006 TEEX

Fall Hazards on Oil and Gas Well Sites

7 ©2006 TEEX

29 CFR 1910 Subpart D: Walking-Working Surfaces

1910.21 Definitions by section 1910.22 General Requirements

Housekeeping Aisles and passageways Covers and guardrails Floor loading protection

8 ©2006 TEEX

1910.23 Floor / wall openings

Protection for floor openings Guardrails, covers, screens, attendants Keep people from walking into holes Keep tools/materials from falling through

Protection for wall openings 4 foot drop Choice of barriers/guards by conditions

9 ©2006 TEEX

1910.23 Floor / wall openings

Protection of open-sided floors… 4 foot drop or dangerous situation Railing except for ramp/stairway/ladder Toeboard for falling material hazards Special allowances for runways

Stairway railings and guards Railing, toeboard, cover specifications

10 ©2006 TEEX

1910.24 Fixed industrial stairs

Must be used for: Routine access Regular access with tools or chemicals

Spiral stairs only for limited/secondary Strong enough for 5x load, 1000 lb 22” wide, 30°-50°, uniform rise/tread Nonslip Platforms, railings, clearance

11 ©2006 TEEX

Portable and fixed ladders

1910.25 Portable wood ladders 1910.26 Portable metal ladders 1910.27 Fixed ladders

12 ©2006 TEEX

Scaffolding

Where are scaffolds used in oil and gas field service?

1910.28 Safety requirements for scaffolding

1910.29 Manually propelled mobile ladder stands and scaffolds (towers)

13 ©2006 TEEX

29 CFR 1926 Subpart M: Fall Protection

Applicable to construction workplaces Site preparation, rig up, rig down Special requirements for cranes/derricks,

scaffolds, tank erection, stairways, ladders 1926.500 Scope, application, definitions 1926.501 Requirement for fall protection 1926.502 Installation, construction, use 1926.503 Training

14 ©2006 TEEX

1926.501 Duty to have fall protection

6 foot drop in construction situations (a)(2) Surface strength and integrity (b)(1) Unprotected sides and edges (b)(2) Leading edges (b)(3) Hoist areas (b)(4) Holes (b)(6) Ramps, runways, walkways

15 ©2006 TEEX

1926.501 Duty to have fall protection

(b)(8) Dangerous equipment (b)(14) Wall openings (b)(15) Not otherwise addressed (c) Falling object protection

16 ©2006 TEEX

1926.502 Fall protection systems criteria and practices

General Provided for employee before work starts

Guardrail systems Safety net systems Personal fall arrest systems Positioning device systems Warning line systems

17 ©2006 TEEX

1926.502 Fall protection systems criteria and practices

Controlled access zones Safety monitoring systems Covers Protection from falling objects Fall protection plan (limited use)

18 ©2006 TEEX

1926.503 Training requirements

Training Certification of training Retraining

19 ©2006 TEEX

1926 Subpart M Appendices

B: Guardrail systems C: Personal fall arrest systems D: Positioning device systems E: Sample fall protection plan

20 ©2006 TEEX

API RP 54

5.5 Fall Protection “All personnel, when engaged in work ten

feet above the rig floor or other working surfaces, shall be protected at all times from falling by guardrail systems, safety net systems, or personal fall arrest systems (PFAS).”

Unless unfeasible or creates a greater hazard

21 ©2006 TEEX

API RP 54

6.11 Personnel Lifting Systems In general, people may not ride elevators Bosun’s chair or equivalent, attached to

traveling block, may be used to reach otherwise inaccessible location – with special provisions

22 ©2006 TEEX

API RP 54

9.3 Ladders, Stairways, and Platforms Fixed ladder specifications: location,

design, and installation At least 2 stairways from rig floor to ground Housekeeping for slips, trips, and egress Platform design and installation Guardrails and toeboards Floor openings