View
224
Download
8
Category
Preview:
Citation preview
Universal CAN BUS INTERFACE Instruction Manual
Volkswagen , Skoda & Seat
PDF created with pdfFactory trial version www.pdffactory.com
I. Introduction
This universal CAN BUS interface is for VW, SKODA & SEAT car models to keep theoriginal functions when use the aftermarket head unit, provide ignition, illumination,reverse signal, parking brake, steering wheel control, A/C information and parking sensorinformation via the original buttons.
II. Preparation before installation.
A. Remove the head unit carefullyB. Please learn the steering wheel control code if the head unit need it, check the
following steps ( Pioneer head unit ).
PDF created with pdfFactory trial version www.pdffactory.com
C. Warning ! Always make sure that the ignition key is removed from the car and thehead unit is powered off.
D.Please make sure that the vehicle compatibility is correct(Check the following form please).Compatibility Notes
Vehicles:
Manufacturer Models Year
VOLKSWAGEN
Passat B5 2008 ~
Bora 2011
Jetta
Passat B6 2009 ~
Passat B7 2011
Passat Variant 2009 ~
Passat CC 2009 ~
Touran 2011 ~
Glof V 2007 ~
Glof VI 2009 ~
Tiguan 2009 ~
Sharan 2010 ~
Caddy 2010 ~
Polo 2010 ~
EOS 2009 ~
Scirocco 2009 ~
T5
Lavida 2011
SKODA
Octavia 2009 ~
Superb 2009 ~
Fabia 2008 ~
Yeti 2011 ~
Roomster
Praktik
SEAT
Leon 2010
Altea / Altea XL 2011 ~
Toleda
PDF created with pdfFactory trial version www.pdffactory.com
Aftermarket Head units:
Alpine:CDA-9851, CDA-9853, CDA-9855, CDA-9857, CDA-9883, CDA-9885, CDA-9887,CVA-1004, DVA-9861, DVA-9965, IDA-X001, IVA-D105, IVA-D310, IVA-D900, IVA-D901,IVA-W200, IVA-W205
Kenwood:DDX-6019, DDX-7017, DDX-7019, DDX-7100, DDX-8017, DDX-8019, DNX-7100,DPX-701, KDC-X590, KDC-X591, KDC-X790, KDC-X791, KDC-X890, KDC-X891,KDC-X991, KOS-V1000, KOS-V500, KVT-617DVD, KVT-717DVD, KVT-719DVD,KVT-817DVD, KVT-819DVD, KVT-M707
JVC:KD-ADV38-AV, KD-ADV5380-AV, KD-APD38, KD-APD58, KD-AR270, KD-AR370,KD-AR470, KD-AR480, KD-AR5500, KD-AR7500, KD-AR770, KD-AR780, KD-AR8500,KD-AR870, KD-AR880, KD-ARV6270, KD-AV7010, KD-AVX1, KD-AVX11-AV, KD-AVX2,KD-AVX33-AV, KD-BT1, KD-LHX550, KD-NX5000, KD-SHX750, KD-SHX850,KW-AVW706, KW-AVX800-AV, KW-XG500, KW-XG700
Clarion:DXZ275MP, DXZ375MP, DXZ475MP, DXZ575USB, DXZ675USB, DXZ775USB,VRX375USB, VRX575USB, VRX775VD
Pioneer:AVIC-D1, AVIC-D2, AVIC-D3, AVIC-N2, AVIC-N3, AVIC-Z2, AVIC-ZI, DEH-2700,DEH-760MP, DEH-780MP, DEH-8MP, DEH-P2600, DEH-P2900MP,DEH-P3700MP,DEH-P3800MP, DEH-P3900MP, DEH-P390MP, DEH-P4600MP,DEH-P460MP, DEH-P4700MP, DEH-P4800MP, DEH-P480MP, DEH-P4900iB,DEH-P490iB, DEH-P560MP, DEH-P5800MP, DEH-P580MP, DEH-P5900iB, DEH-P590iB,DEH-P6600, DEH-P6700MP, DEH-P670MP, DEH-P6800MP, DEH-P680MP,DEH-P6900UB, DEH-P690UB, DEH-P7700MP, DEH-P770MP, DEH-P7800BT,DEH-P7800MP, DEH-P790BT, DEH-P80MP, DEH-P8600MP, DEH-P860MP,DEH-P880MP, DEH-P880RPS, DEH-P8MP, DEH-P9600MP, DEH-P960MP,DEH-P9800BT, DEH-P980BT, FHP-5000MP
PDF created with pdfFactory trial version www.pdffactory.com
III. Functions
1) Ignition function:Decode Ignition ( ACC ) control signal from CAN data stream to make the head unitstanding by and go into working state, to make consumption of head unit becomeslowest. ( It's on "ON" State after ignition , output: 12V. It's on "OFF" State whenremove the key, output: 0V. )
2) Illumination function:Decode ILL control signal from CAN data stream to make the head unit switchingbetween Day & Night mode. ( The output is 12V when the dashboard light turns on ,output is 0v when the dashboard light turn off ).
3) Reverse Signal :Decode reverse signal from CAN data stream to make the head unit switching to rearviewing camera input when reverse. ( Output is 12 V when speed in reverse,otherwise is 0V).
4) Steering wheel control of car stereo. ( As the following pictures. ):Decode the information of steering wheel control from CAN BUS to controlaftermarket DVD / GPS unit.
PDF created with pdfFactory trial version www.pdffactory.com
5) Original A/C information display
SWC Function Pioneer JVC Kenwood Clarion Alpinevolume+ √ √ √ √ √volume- √ √ √ √ √
> /MENU UP √ √ √ √ √
</MENU DOWN √ √ √ √ √SRC √ √ √ √ √
MUTE √ √ √ √ √MIC √ √ √ √ √TEL √ √ √ √
PDF created with pdfFactory trial version www.pdffactory.com
6 ) Parking sensor and rear view camera information display
IV. Technical Characteristics• Feeding Power: +12/16 VDC• Consumption (Idle): < 0.6mA• Consumption (Working): 0.25A• Positive ignition output• Positive light output• Negative parking brake output• Positive Reverse output• Video output type: Composite• Rear view camera video input• Size: W / D / H : 100X95X25mm• Weight: 160g
V. Core Components:
a) CAN Transceiver : Use TJA1054A from NXP. TJA1054A is the CAN BUStransceiver with fault tolerance function, it's applicable to CAN BUS system and bewidely used in CAN BUS field, it's regard as the standard of fault tolerance CANtransceiver in this industry.
b) CPU :Use STM32F103 from ST. STM32F103 use high performance ARMCortex-M3 by 32 bits, built-in High Speed Memory and standard can communicationinterface. CAN interface is compatible with standard 2.0A & 2.0B ( Active ). The bitrate is 1mb/ S, it satisfies all the function of CAN BUS control.
PDF created with pdfFactory trial version www.pdffactory.com
VI. Fitting the interface.
PDF created with pdfFactory trial version www.pdffactory.com
Interface for Illustration
Please check the following steps⑤
① ② ③ ④ ⑥ ⑦
⑧ ⑨ ⑩
PDF created with pdfFactory trial version www.pdffactory.com
VW-SS-10
Once the original head unit has been removed:①: Connect the① with the original head unit connector on the car side.②: Connect the② with⑧.③: Connect the③ with the aftermarket head unit ( this one is for Pioneer Head unit. It willbe different in other head unit manufacturers.).④: Connect the④ with the original rear view camera on the car side.⑤: Connect the⑤ with the⑥⑦: Connect the⑦ with (It's for video output).
: Switch the arrow to "1" ( It's for Pioneer head unit remote control code. Please checkthe following form for other manufacturer head units).
Manufacturer Head unit Switch PositionPioneer 1JVC 2Kenwood 3Clarion 4Alpine 5
⑨ & ⑩: it's the reservation port for the car models which has the S-VIDEO & CVBSvideo input of rear view camera.
If use the universal cables, please check the following definition to connect with theaftermarket head unit. There are 2 kinds of universal cables which according differentaftermarket’s IR output ( SWC /SWC Jack ),the one with 3.5MM IR output, the otherwithout it .
The First with 3.5MM IR Output
IR-GND R2 IR1
PDF created with pdfFactory trial version www.pdffactory.com
Part I
Part II
The Second without 3.5MM IR output
The definition of the cable:
Part IColor Red Black Brown Orange Purple Blue&White Orange&WhiteDefinition ACC IR GND Park CTRL ILL CTRL Reverse CTRL IR OUT1 IR OUT2
Part II
Color Yellow Black Green Green&Black Grey&BlackDefinition BATT GND RL+ RL- FR-Color Grey Purple Purple&Black White White&BlackDefinition FR+ RR+ RR- FL+ FL-
16 12 8 4
13 9 5 1
PDF created with pdfFactory trial version www.pdffactory.com
Definition of original car
PIN Definition PIN Definition1 RR+ 9 CAN_H2 RF+ 10 CAN_L3 LF+ 11 NC4 LR+ 12 GND(Black)5 RR- 13 NC6 RF- 14 NC7 LF- 15 BATT(Yelow)8 LR- 16 NC
Definition of CAN BUS
PIN Definition PIN Definition1 IR-GND 2 IR13 IR2 4 Reverse CTRL Output5 CAM_RGB_GND 6 CAM_SYNC-IN7 CAM_B-IN 8 CAM_G-IN9 CAM_R-IN 10 NC11 NC 12 NC13 NC 14 NC15 NC 16 NC17 Park CTRL Output 18 NC19 ILL CTRL Output 20 ACC21 CAN_H 22 CAN_L23 GND 24 BATT25 NC 26 NC27 NC 28 NC
Pin2 Pin28
Pin1 Pin27
PDF created with pdfFactory trial version www.pdffactory.com
For the AD remote control, please refer the following values:
VII. TestBefore you test the CAN BUS interface with the head unit, make sure all connections arecorrect.
Step A. Ignite the car and power on the head unit.
Step B. Press the original buttons on the car to adjust A/C, as the following picture:
It will last 3 seconds after you adjust the A/C, then exit to the previous page automatically.
Step C. When you put into reverse gear, the parking sensor system will be activated, thehead unit will switch the screen to rear view camera or parking sensor automatically. Youcould press the volume "+" button on the steering wheel to switch the picture on thescreen between rear view camera and parking sensor.
PDF created with pdfFactory trial version www.pdffactory.com
Volume "+" button on the steering wheel
Rear View Camera Parking SensorFor the vehicles which have the front and rear parking sensors, it will exit from the parkingsensor system automatically when the speed is more than 20km/h, or you could exit itmanually via the button beside the gear lever. For the vehicles which only have the rearparking sensor, it will exit from the parking sensor system automatically when you exit thereverse gear.
Step D. Press " Volume + / Volume -" button on the steering wheel, it will be displayed onthe aftermarket head unit.
Step E. Press "∧ /∨" button on the steering wheel to switch the previous or next channelor music.
V. Functions• Ignition function
PDF created with pdfFactory trial version www.pdffactory.com
Recommended