VIBRATION TEST SYSTEMS Selection Guide - · PDF fileVIBRATION TEST SYSTEMS. 2 Force (N) =...

Selection Guide

VIBRATION TEST SYSTEMS

Force (N) = acceleration (m/s2) x mass (kg)*

General formula for calculatingthe force vector of vibration systems

*Mass = moving element + device under test + fixture, where applicable:slip table + driver bar + thermobarrier

Vibration Testing Equipment

The system at a glance

As a worldwide supplier of measuring and testing systems forindustry and research, TIRA operates from a number of sites andis active in the development and production of advanced equip-ment (including application-specific software) for simulatingenvironmental conditions, testing the properties of materials, andeliminating undesirable vibrations.

Product range:

• Electrodynamic vibration systems, 9N - 300 kN• Modal thrusters• Long stroke systems, max. stroke 102 mm• Analog/digital amplifiers• Vibration control systems for sine/random/shock/

mixed mode• Slip tables, linear/hydrostatic guided• Climatic/temperature systems• Head expanders/special-purpose units• Calibration systems

A variety of applications, all from one source

The TIRA group is structured for maximumflexibility and production depth, an effect rein-forced by interaction between such productlines as vibration testing and environmentalsimulation, a company-owned mechanicalmanufacturing center, and divisions for mate-rial testing and balancing equipment. Recordshave been kept for the last 50 years and in-clude design data, past experience and thelatest findings regarding the industry as awhole, all designed to form the best technolo-gical standards and reliable performance.Customers can thus expect customized and/orstandardized system solutions from one source,and advice from the development, planningand design stages through to assembly, instal-lation, startup and after-sales services.

TIRA equipment has proven its worth in in-dustry and at universities and research institutesworldwide. In order to provide product-specificconsulting, assistance and know-how on aglobal scale, the company works throughselected distributors and service partner in over60 countries.

TIRA on the Hanover Trade Fair

Shakers 9 N - 200 N

Vibration Systems

Vibration systems from 9 N (2 lbf) to 440 N (100 lbf)

TIRA products are subject to strict quality assurance proceduresdesigned to meet CE requirements as well as national and inter-national norms. This also applies to our proven testing andmeasuring systems where feedback from our customers helps usto retain high standards of quality and profitability now and inthe future. Quality management has been certified in terms of DIN ISO9001 since 1995, and DIN EN ISO 9001: 2008 since February2010.

These shakers use permanent magnets and areavailable as portable and stationary systemsfor simulating ambient vibration conditions.Robust design ensures a long service life, andtypical applications include structure analysis,sensor calibration and testing smaller subas-semblies. These exciters are characterized byhigh lateral and axial stiffness and come inlightweight construction as specified by indu-strial users.

New rare earth magnets have been added tothe range of conventional Alnico magnets,reducing weight from 30 kg to 10 kg for easyhandling particularly in mobile applications.Our vibration generators have proven theirworth in environmental labs, universities andindustrial production lines both for componentsand calibration. These complete systemsenable testing in accordance with national andinternational standards such as DIN, ISO, BS,MIL, IEC and ASTM.

System TV 51120 TV 52110 TV 52120 TV 51144Shaker S 51120 S 52110 S 52120 S 51144Amplifier BAA 500 BAA 120 BAA 500 BAA 1000Blower SB 0080 – SB 0080 SB0140

Metric US Metric US Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random 200/140 44/31 100/50 22/11 200/100 44/22 440/311 99/70Frequency range (Hz) 2 - 7000 2 - 7000 2 - 7000 2 - 7000 2 - 7000 2 - 7000 2 - 6500 2 - 6500Max. rated travel (mm)/(inch) Pk - Pk 13 0.5 15 *(25) 0.6*(1.0) 15 *(25) 0.6*(1.0) 25.4 1.0Max. velocity (m/s)/(inch/sec) Sine/Random 1.5/1.5 59/59 1.5/1.5 59/59 1.5/1.5 59/59 1.5/1.5 59/59Max. acceleration (g) Sine/Random 89/62 89/62 50/25 50/25 100/50 100/50 110/80 110/80Suspension stiffness (N/mm) (lbf/inch) 8 45.7 5 28.6 5 28.6 5 28.6Effective moving mass (kg)/(lb) 0.23 0.51 0.2 0.44 0.2 0.44 0.4 0.88Max. weight tested (kg)/(lb) 3.0 6.6 3.0 6.6 3.0 6.6 6.0 13.2Main resonance frequency (Hz) >6500 >6500 >5700 >5700 >5700 >5700 > 5500 > 5500Weight with trunnion (kg)/(lb) 12 26.4 36 79.4 36 79.4 18 39.7Armature (ø/mm)/(ø/inch) 60 2.36 60 2.36 60 2.36 60 2.36Max. power consumption at 230 V (kVA) Ampl./Blow. 0.35/0.46 0.35/0.46 0.08/- 0.08/- 0.35/0.46 0.35/0.46 1.22/1.4 1.22/1.4

* Increased displacements available on request

System TV 50009 TV 50018 TV 51075 TV 51110Shaker S 50009 S 50018 S 51075 S 51110Amplifier BAA 60 BAA 60 BAA 120 BAA 120

Metric US Metric US Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random 9/- 2/- 18/- 4/- 75/40 16/8 100/70 22/15Frequency range (Hz) 2 - 18000 2 - 18000 2 - 18000 2 - 18000 2 - 7000 2 - 7000 2 - 7000 2 - 7000Max. rated travel (mm)/(inch) Pk - Pk 3 0.12 5 0.20 10 0.39 13 0.51Max. velocity (m/s)/(inch/sec) Sine/Random 1.5/- 59/- 1.5/- 59/- 1.5/1.5 59/59 1.5/1.5 59/59Max. acceleration (g) Sine/Random 60/- 60/- 65/- 65/- 50/30 50/30 45/30 45/30Suspension stiffness (N/mm) (lbf/inch) 4 22.8 4.4 25.1 6.5 37.1 8 45.7Effective moving mass (kg)/(lb) 0.015 0.033 0.028 0.062 0.15 0.331 0.23 0.507Main resonance frequency (Hz) >16000 >16000 >17000 >17000 >5500 >5500 >6500 >6500Weight with trunnion (kg)/(lb) 2.2 4.9 5.0 11.0 20 44.1 12 26.4Armature (ø/mm)/(ø/inch) 7 0.28 7 0.28 40 1.57 60 2.36Max. power consumption at 230 V (kVA) 0.05 0.05 0.05 0.05 0.07 0.07 0.08 0.08

Shaker S 50101-80

System TV 50101-80 TV 50101/LS-80 TV 5220-120Shaker S 50101-80 S 50101/LS-80 S 5220-120Amplifier BAA 1000-E BAA 1000-ET BAA 1000-EBlower SB 0140 SB 0140 SB 0140

Metric US Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random/Shock 650/420/840 146/94/189 650/420/840 146/94/189 1000/650/1300 225/146/292Frequency range (Hz) DC - 7000 DC - 7000 DC - 7000 DC - 7000 DC - 7000 DC - 7000Max. rated travel (mm)/(inch) Pk - Pk 25.4 1.0 40.0 1.6 25.4 1.0Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.5/1.5/2.0 59/59/79 1.5/1.5/2.0 59/59/79 1.5/1.5/2.0 59/59/79Max. acceleration (g) Sine/Random/Shock 42/27/54 42/27/54 42/27/54 42/27/54 60/39/79 60/39/79Suspension stiffness (N/mm) (lbf/inch) 22 125.6 ** ** 22 125.6Effective moving mass (kg)/(lb) 1.6 3.5 1.6 3.5 1.7 3.7Max. weight tested (kg)/(lb) 20 44.1 20 44.1 20 44.1Main resonance frequency (Hz) >4800 >4800 >4700 >4700 >5000 >5000Weight with trunnion (kg)/(lb) 122 269.0 122 269.0 122 269.0Stray magnetic field (mT) without/with degauss kit <8.5/<0.5 <8.5/<0.5 <8.5/<0.5 <8.5/<0.5 <8.5/<0.5 <8.5/<0.5Armature (ø/mm)/(ø/inch) 80 3.15 80 3.15 120 4.72Max. power consumption at 230 V (kVA) Amplifier/FPS+Blower 1.3/2.4 1.3/2.4 1.4/2.4 1.4/2.4 2/2.4 2/2.4Interlocks Temperature, overtravel, Temperature, overtravel, Temperature, overtravel,

airflow, overcurrent, airflow, overcurrent airflow, overcurrent,compressed air compressed air

System TV 5220/LS-120 TV 54216-130 TV 54216/LS-130Shaker S 5220/LS-120 S 54216-130 S 54216/LS-130Amplifier BAA 1000-ET BAA 1000-E BAA 1000-ETBlower SB 0140 SB 0140 SB 0140

Rated peak force (N)/(lbf) Sine/Random/Shock 1000/650/1300 225/146/292 1600/1000/2000 360/225/450 1600/1000/2000 360/225/450Frequency range (Hz) DC - 7000 DC - 7000 DC - 4000 DC - 4000 DC - 4000 DC - 4000Max. rated travel (mm)/(inch) Pk - Pk 40.0 1.6 25.4 1.0 50.8 2.0Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.5/1.5/2.0 59/59/79 1.3/1.3/2.0 51/51/79 1.3/1.3/2.0 51/51/79Max. acceleration (g) Sine/Random/Shock 60/39/79 60/39/79 60/40/80 60/40/80 60/40/80 60/40/80Suspension stiffness (N/mm) (lbf/inch) ** ** 22 125.6 ** **Effective moving mass (kg)/(lb) 1.7 3.7 2.5 5.5 2.5 5.5Max. weight tested (kg)/(lb) 20 44.1 20 44.1 20 44.1Main resonance frequency (Hz) >5000 >5000 >3500 >3500 >3000 >3000Weight with trunnion (kg)/(lb) 122 269.0 188 414.5 188 414.5Stray magnetic field (mT) without/with degauss kit <8.5/<0.5 <8.5/<0.5 <8.5/<1 <8.5/<1 <8.5/<1 <8.5/<1Armature (ø/mm)/(ø/inch) 120 4.72 130 5.12 130 5.12Max. power consumption at 230 V (kVA) Amplifier/FPS+Blower 2.1/2.4 2.1/2.4 2.3/2.4 2.3/2.4 2.4/2.4 2.4/2.4Interlocks Temperature, overtravel, Temperature, overtravel Temperature, overtravel,

airflow, overcurrent airflow,overcurrent, airflow, overcurrentcompressed air

** Electronic 0 – point regulation with adjustable stiffness

Vibration Systems

Vibration systems from 650 N (146 lbf) to 1600 N (360 lbf)

- Long-time operation- Minimum maintenance effort- High cross-axial stiffness- Supported by rugged frame with vibration isolators- Automatic centering of the armature- Pneumatic or electronic load compensation for heavy test

loads- LS-shakers with up to 50.8 mm (2 inch) displacement

and electronic zero-point regulation with adjustable stiffness

- Optional degauss kit to reduce stray magnetic field- Multiple safety devices- Filtered air-cooling blower- Squeak&Rattle Option (Low noise operation without

blower)

Shaker S 50350-120

System TV 50350-120 TV 50350/LS-120Shaker S 50350-120 S 50350/LS-120Amplifier A 1 01 1 004 A 1 01 1 004 TBlower SB 0310 SB 0310

Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random/Shock 2700/2000/4000 607/450/899 2700/2000/4000 607/450/899Frequency range (Hz) DC - 4000 DC - 4000 DC - 4000 DC - 4000Max. rated travel (mm)/(inch) Pk - Pk 25.4 1.0 50.8 2.0Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.5/1.5/2.5 59/59/98 1.5/1.5/2.5 59/59/98Max. acceleration (g) Sine/Random/Shock 110/81/163 110/81/163 98/73/148 98/73/148Suspension stiffness (N/mm) (lbf/inch) 22 125.6 ** **Effective moving mass (kg)/(lb) 2.5 5.5 2.8 6.2Max. weight tested (kg)/(lb) 25 55.1 25 55.1Main resonance frequency (Hz) >4000 >4000 >3700 >3700Weight with trunnion (kg)/(lb) 280 617.3 280 617.3Stray magnetic field (mT) without/with degauss kit <8.5/<0.5 <8.5/<0.5 <8.5/<0.5 <8.5/<0.5Armature (ø/mm)/(ø/inch) 120 4.72 120 4.72Max. power consumption at 400 V (kVA) incl. Blower 6 6 6 6Interlocks Temperature, overtravel, Temperature, overtravel,

airflow, overcurrent, airflow, overcurrentcompressed air

System TV 50303-120 TV 50303/LS-120Shaker S 50303-120 S 50303/LS-120Amplifier A 1 01 1 003 A 1 01 1 003 TBlower SB 0200 SB 0200

Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random/Shock 2000/1000/4000 450/225/900 2000/1000/4000 450/225/900Frequency range (Hz) DC - 4000 DC - 4000 DC - 4000 DC - 4000Max. rated travel (mm)/(inch) Pk - Pk 25.4 1.0 50.8 2.0Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.5/1.5/2.0 59/59/79 1.5/1.5/2.0 59/59/79Max. acceleration (g) Sine/Random/Shock 80/40/160 80/40/160 72/36/144 72/36/144Suspension stiffness (N/mm) (lbf/inch) 22 125.6 ** **Effective moving mass (kg)/(lb) 2.5 5.5 2.8 6.2Max. weight tested (kg)/(lb) 25 55.1 25 55.1Main resonance frequency (Hz) >4000 >4000 >3700 >3700Weight with trunnion (kg)/(lb) 280 617.3 280 617.3Stray magnetic field (mT) without/with degauss kit <8.5/<0.5 <8.5/<0.5 <8.5/<0.5 <8.5/<0.5Armature (ø/mm)/(ø/inch) 120 4.72 120 4.72Max. power consumption at 400 V (kVA) incl. Blower 5 5 5 5Interlocks Temperature, overtravel, Temperature, overtravel,

airflow, overcurrent, airflow, overcurrentcompressed air

Vibration Systems

Vibration systems from 2 kN (450 lbf) to 2.7 kN (610 lbf)

- Clamping table ø120 mm with 7 threaded inserts- Long-time operation- Minimum maintenance effort- High cross-axial stiffness - Supported by rugged frame with combined

rubber/air isolators - Automatic centering of the armature - Fully automatic pneumatic or electronic load compen-

sation for heavy test loads - LS-shakers with 50.8 mm (2 inch) displacement- Optional degauss kit to reduce stray magnetic field- Multiple safety devices- Filtered air-cooling blower - Squeak&Rattle Option (Low noise operation without

blower)

Shaker S 56263/LS-180

System TV 56263/LS-340 TV 56280/LS-180 TV 56280/LS-340Shaker S 56263/LS-340 S 56280/LS-180 S 56280/LS-340Amplifier A 1 02 1 010 A 1 02 1 015 A 1 02 1 015Blower SD 9 SD 9 SD 9

Rated peak force (N)/(lbf) Sine/Random/Shock 6300/6300/12600 1416/1416/2833 8000/8000/16000 1798/1798/3597 8000/8000/16000 1798/1798/3597Frequency range (Hz) DC - 3000 DC - 3000 DC - 3000 DC - 3000 DC - 3000 DC - 3000Max. rated travel (mm)/(inch) Pk - Pk 50.8 2.0 50.8 2.0 50.8 2.0Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.7/1.7/2.5 67/67/98 1.7/1.7/2.5 67/67/98 1.7/1.7/2.5 67/67/98Max. acceleration (g) Sine/Random/Shock 75/75/151 75/75/151 93/93/186 93/93/186 88/88/175 88/88/175Suspension stiffness (N/mm) (lbf/inch) 50 285.5 50 285.5 50 285.5Effective moving mass (kg)/(lb) 8.5 18,7 8.8 19.4 9.3 20.5Max. weight tested (kg)/(lb) 150 330.7 150 330.7 150 330.7Main resonance frequency (Hz) >2700 >2700 >3000 >3000 >2700 >2700Weight with trunnion (kg)/(lb) 800 1763.7 900 1984.2 950 2094.4Stray magnetic field (mT) without/with degauss kit <8.5/<0.5 <8.5/<0.5 <8.5/<0.5 <8.5/<0.5 <8.5/<0.5 <8.5/<0.5Armature (ø/mm)/(ø/inch) 340 13.39 180 7.09 340 13.39Max. power consumption at 400 V (kVA) incl. Blower 14.6 14.6 16 16 16 16Interlocks Temperature, overtravel, Temperature, overtravel, Temperature, overtravel,

airflow, overcurrent, airflow, overcurrent, airflow, overcurrent,compressed air compressed air compressed air

System TV 55240/LS-180 TV 55240/LS-340 TV 56263/LS-180Shaker S 55240/LS-180 S 55240/LS-340 S 56263/LS-180Amplifier A 1 01 1 010 A 1 01 1 010 A 1 02 1 010Blower SB 0310 SB 0310 SD 9

Rated peak force (N)/(lbf) Sine/Random/Shock 4000/4000/8000 899/899/1798 4000/4000/8000 899/899/1798 6300/6300/12600 1416/1416/2833Frequency range (Hz) DC - 3000 DC - 3000 DC - 3000 DC - 3000 DC - 3000 DC - 3000Max. rated travel (mm)/(inch) Pk - Pk 50.8 2.0 50.8 2.0 50.8 2.0Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.7/1.7/2.0 67/67/79 1.7/1.7/2.0 67/67/79 1.7/1.7/2.5 67/67/98Max. acceleration (g) Sine/Random/Shock 59/59/119 59/59/119 49/49/98 49/49/98 80/80/160 80/80/160Suspension stiffness (N/mm) (lbf/inch) 50 285.5 50 285.5 50 285.5Effective moving mass (kg)/(lb) 6.8 15.0 8.2 18.1 8 17.6Max. weight tested (kg)/(lb) 100 220.5 100 220.5 150 330.7Main resonance frequency (Hz) >3000 >3000 >2700 >2700 >3000 >3000Weight with trunnion (kg)/(lb) 700 1543.2 750 1653.5 765 1686.6Stray magnetic field (mT) without/with degauss kit <8.5/<0.5 <8.5/<0.5 <8.5/<0.5 <8.5/<0.5 <8.5/<0.5 <8.5/<0.5Armature (ø/mm)/(ø/inch) 180 7.09 340 13.39 180 7.09Max. power consumption at 400 V (kVA) incl. Blower 6.6 6.6 6.6 6.6 14.6 14.6Interlocks Temperature, overtravel, Temperature, overtravel, Temperature, overtravel,

Vibration Systems

Vibration systems from 4 kN (900 lbf) to 8 kN (1800 lbf)

- Clamping table ø180 mm with 21 threaded inserts or ø340 mm with 25 threaded inserts

- Long-time operation- Minimum maintenance effort- High cross-axial stiffness - Supported by rugged frame with combined rubber/air isolators- Automatic centering of the armature - Fully automatic pneumatic or electronic load compensation for

heavy test loads- 50.8 mm (2 inch) displacement- Optional degauss kit to reduce stray magnetic field- Multiple safety devices- Filtered air-cooling blower - Squeak&Rattle Option (Low noise operation without blower) - Wheels&Rails Option (Shaker is displaceable on rails)

System TV 57315/LS-230 TV 57315/LS-340Shaker S 57315/LS -230 S 57315/LS-340Amplifier A 3 01 3 030 A 3 01 3 030Blower SD 120 SD 120

Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random/Shock 15000/15000/30000 3372/3372/6744 15000/15000/30000 3372/3372/6744Frequency range (Hz) DC - 3000 DC - 3000 DC - 3000 DC - 3000Max. rated travel (mm)/(inch) Pk - Pk 50.8 2.0 50.8 2.0Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98Max. acceleration (g) Sine/Random/Shock 115/115/230 115/115/230 100/100/200 100/100/200Suspension stiffness (N/mm) (lbf/inch) 75 428.3 75 428.3Effective moving mass (kg)/(lb) 13 28.7 15 33.1Max. weight tested (kg)/(lb) 250 551.2 250 551.2Main resonance frequency (Hz) >2300 >2300 >2500 >2500Weight with trunnion (kg)/(lb) 1450 3196.7 1450 3196.7Stray magnetic field (mT) without/with degauss kit <20/<1 <20/<1 <20/<1 <20/<1Armature (ø/mm)/(ø/inch) 230 9.06 340 13.39Max. power consumption at 400 V (kVA) incl. Blower 37.5 37.5 37.5 37.5Interlocks Temperature, overtravel, Temperature, overtravel,

airflow, overcurrent, airflow, overcurrent,compressed air compressed air

System TV 51010/LS-230 TV 51010/LS-340Shaker S 51010/LS-230 S 51010/LS-340Amplifier A 1 01 1 015 A 1 01 1 015Blower SD 120 SD 120

Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random/Shock 11000/11000/22000 2473/2473/4946 11000/11000/22000 2473/2473/4946Frequency range (Hz) DC - 3000 DC - 3000 DC - 3000 DC - 3000Max. rated travel (mm)/(inch) Pk - Pk 50.8 2.0 50.8 2.0Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98Max. acceleration (g) Sine/Random/Shock 100/100/200 100/100/200 82/82/167 82/82/167Suspension stiffness (N/mm) (lbf/inch) 75 428.3 75 428.3Effective moving mass (kg)/(lb) 11 24.3 13.4 29.5Max. weight tested (kg)/(lb) 150 330.7 150 330.7Main resonance frequency (Hz) >2300 >2300 >2500 >2500Weight with trunnion (kg)/(lb) 1450 3196.7 1450 3196.7Stray magnetic field (mT) without/with degauss kit <8.5/<1 <8.5/<1 <8.5/<1 <8.5/<1Armature (ø/mm)/(ø/inch) 230 9.06 340 13.39Max. power consumption at 400 V (kVA) incl. Blower 28.2 28.2 28.2 28.2Interlocks Temperature, overtravel, Temperature, overtravel,

airflow, overcurrent, airflow, overcurrent,compressed air compressed air

Vibration Systems

Vibration systems from11 kN (2500 lbf) to 15 kN (3350 lbf)

- Clamping table ø230 mm with 17 threaded inserts or ø340 mm with 25 threaded inserts

- Long-time operation- Minimum maintenance effort- High cross-axial stiffness - Supported by rugged frame with combined

rubber/air isolators - Automatic centering of the armature - Fully automatic pneumatic or electronic load compensation for

heavy test loads - LS-shakers with 50.8 mm (2 inch) displacement- Optional degauss kit to reduce stray magnetic field- Multiple safety devices- Filtered air-cooling blower - Squeak&Rattle Option (Low noise operation without blower) - Wheels&Rails Option (Shaker is displaceable on rails)

Shaker S 59327/AIT-340

TIRA's ”AIT” system - built into the frame - pro-vides integrated vibration isolation for verticaland horizontal body operation. The AIT systemensures optimal vibration isolation at low fre-quencies and precisely guides the generatorbody in the direction of excitation.

System TV 59327/*-340 TV 59327/*-440 TV 59327/*-640Shaker S 59327/*-340 S 59327/*-440 S 59327/*-640Amplifier A 3 08 3 040 A 3 08 3 040 A 3 08 3 060Blower HRD 7/FU/11 HRD 7/FU/11 HRD 7/FU/11

Rated peak force (N)/(lbf) Sine/Random/Shock 26700/26700/53400 6002/6002/12005 26700/26700/53400 6002/6002/12005 26700/26700/53400 6002/6002/12005Frequency range (Hz) 5 - 3000 5 - 3000 5 - 3000 5 - 3000 5 - 2000 5 - 2000Max. rated travel (mm)/(inch) Pk - Pk 50.8** 2.0** 50.8** 2.0** 50.8** 2.0**Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98Max. acceleration (g) Sine/Random/Shock 84/84/167 84/84/167 79/79/158 79/79/158 66/66/131 66/66/131Suspension stiffness (N/mm) (lbf/inch) 150 856.5 150 856.5 150 856.5Effective moving mass (kg)/(lb) 29.0 63.9 36.5 80.5 40.5 89.3Max. weight tested (kg)/(lb) 610 1345 610 1345 610 1345Main resonance frequency (Hz) >2400 >2400 >2400 >2400 2000 2000Weight with trunnion (kg)/(lb) RIT/AIT/LB 2350/2700/2250 5181/5952/4960 2350/2700/2250 5181/5952/4960 2350/2700/2250 5181/5952/4960Stray magnetic field (mT) with degauss kit <1 <1 <1 <1 <2 <2Armature (ø/mm)/(ø/inch) 340 13.4 440 17.3 640 25.2Max. power consumption at 400 V (kVA) Amplifier/Blower 30/17.5 30/17.5 30/17.5 30/17.5 38/17.5 38/17.5Interlocks Temperature, overtravel, Temperature, overtravel, Temperature, overtravel,

* RIT, AIT or LB

** Optionally 3“ displacement

System TV 59320/*-340 TV 59320/*-440 TV 59320/*-640Shaker S 59320/*-340 S 59320/*-440 S 59320/*-640Amplifier A 3 07 3 030 A 3 07 3 030 A 3 07 3 030Blower RD 8 RD 8 RD 8

Rated peak force (N)/(lbf) Sine/Random/Shock 20000/20000/40000 4496/4496/8992 20000/20000/40000 4496/4496/8992 20000/20000/40000 4496/4496/8992Frequency range (Hz) 5 - 3000 5 - 3000 5 - 3000 5 - 3000 5 - 2000 5 - 2000Max. rated travel (mm)/(inch) Pk - Pk 50.8 2.0 50.8 2.0 50.8 2.0Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98Max. acceleration (g) Sine/Random/Shock 82/82/163 82/82/163 73/73/146 73/73/146 50/50/101 50/50/101Suspension stiffness (N/mm) (lbf/inch) 150 856.5 150 856.5 150 856.5Effective moving mass (kg)/(lb) 25.0 55.1 28.0 61.7 35.0 77.2Max. weight tested (kg)/(lb) 410 904 410 904 410 904Main resonance frequency (Hz) >2400 >2400 >2400 >2400 2000 2000Weight with trunnion (kg)/(lb) RIT/AIT/LB 1650/1850/1550 3636/4079/3417 1850/2100/1750 4079/4630/3858 2000/2250/1900 4409/4960/4189Stray magnetic field (mT) with degauss kit <1 <1 <1 <1 <2 <2Armature (ø/mm)/(ø/inch) 340 13.4 440 17.3 640 25.2Max. power consumption at 400 V (kVA) incl. Blower 30 30 30 30 30 30Interlocks Temperature, overtravel, Temperature, overtravel, Temperature, overtravel,

Vibration Systems

Vibration systems from 20 kN (4500 lbf)to 26.7 kN (6000 lbf)

- Clamping table ø340 mm, ø440 mm or ø640 mm- Long-time operation- Minimum maintenance effort- High cross-axial stiffness - Supported by rugged frame with vibration isolators- Automatic centering of the AIT-System and the armature - AIT-System fixable to use the full displacement also at low

frequencies - Fully automatic pneumatic or electronic load compensation for

heavy test loads - Filtered air-cooling blower - Available as RIT, AIT or LB system- 2 inch displacement (26.7 kN optional 3 inch) - Switchable to energy-saving mode - Optional Dual Bearing-System (at 26.7 kN) for enhancement

of cross axial stiffness and reduction of wear - Wheels&Rails Option (Shaker is displaceable on rails)

- Optional Dual Bearing-System for enhancement of cross axial stiffness andreduction of wear

- Wheels&Rails Option (Shaker is displace-able on rails)

- Multiple safety devices

Rated peak force (N)/(lbf) Sine/Random/Shock 49500/49500/99000 11128/11128/22256 49500/49500/99000 11128/11128/22256 49500/49500/99000 11128/11128/22256Frequency range (Hz) 5 - 3000 5 - 3000 5 - 3000 5 - 3000 5 - 2000 5 - 2000Max. rated travel (mm)/(inch) Pk - Pk 50.8** 2.0** 50.8** 2.0** 50.8** 2.0**Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98Max. acceleration (g) Sine/Random/Shock 100/100/264 100/100/264 100/100/224 100/100/224 70/70/160 70/70/160Suspension stiffness (N/mm) (lbf/inch) 200 1142 200 1142 200 1142Effective moving mass (kg)/(lb) 38.0 83.8 43.0 94.8 52.0 114.6Max. weight tested (kg)/(lb) 910 2006 910 2006 910 2006Main resonance frequency (Hz) >2100 >2100 >2100 >2100 2000 2000Weight with trunnion (kg)/(lb) AIT/LB 4350/3350 9590/7385 4350/3350 9590/7385 4350/3350 9590/7385Stray magnetic field (mT) with degauss kit <1 <1 <1 <1 <2 <2Armature (ø/mm)/(ø/inch) 340 13.4 440 17.3 640 25.2Max. power consumption at 400 V (kVA) Amplifier/Blower 47/27 47/27 47/27 47/27 47/27 47/27Interlocks Temperature, overtravel, Temperature, overtravel, Temperature, overtravel,

* AIT or LB

Vibration systems from 35 kN (7868 lbf)to 49.5 kN (11128 lbf)

- Clamping table ø340 mm, ø440 mm or ø640 mm- Long-time operation- Minimum maintenance effort- High cross-axial stiffness - Supported by rugged frame with vibration isolators- Automatic centering of the AIT-System and the

armature - AIT-System fixable to use the full displacement also

at low frequencies - Fully automatic pneumatic or electronic load com-

pensation for heavy test loads - Air-cooling blower- 35 kN is available as RIT, AIT or LB trunnion system - 49.5 kN is available as AIT or LB trunnion system - 2 inch displacement (optional 3 inch) - Degauss kit to reduce stray magnetic field- Switchable to energy-saving mode

Vibration Systems

Rated peak force (N)/(lbf) Sine/Random/Shock 35000/35000/70000 7868/7868/15737 35000/35000/70000 7868/7868/15737 35000/35000/70000 7868/7868/15737Frequency range (Hz) 5 - 3000 5 - 3000 5 - 3000 5 - 3000 5 - 2000 5 - 2000Max. rated travel (mm)/(inch) Pk - Pk 50.8** 2.0** 50.8** 2.0** 50.8** 2.0**Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98Max. acceleration (g) Sine/Random/Shock 100/100/220 100/100/220 100/100/207 100/100/207 70/70/160 70/70/160Suspension stiffness (N/mm) (lbf/inch) 150 856.5 150 856.5 200 1142Effective moving mass (kg)/(lb) 29.0 63.9 36.5 80.5 40.5 89.3Max. weight tested (kg)/(lb) 610 1345 610 1345 610 1345Main resonance frequency (Hz) >2400 >2400 >2400 >2400 2000 2000Weight with trunnion (kg)/(lb) RIT/AIT/LB 2350/2700/2250 5181/5952/4960 2350/2700/2250 5181/5952/4960 2350/2700/2250 5181/5952/4960Stray magnetic field (mT) with degauss kit <1 <1 <1 <1 <2 <2Armature (ø/mm)/(ø/inch) 340 13.4 440 17.3 640 25.2Max. power consumption at 400 V (kVA) Amplifier/Blower 38/17.5 38/17.5 38/17.5 38/17.5 38/17.5 38/17.5Interlocks Temperature, overtravel, Temperature, overtravel, Temperature, overtravel,

* RIT, AIT or LB

Vibration Systems

Vibration system 55 kN (12364 lbf)

- Clamping table ø340 mm, ø440 mm or ø640 mm- Long-time operation- Minimum maintenance effort- High cross-axial stiffness - Supported by rugged frame with

vibration isolators- Automatic centering of the AIT-System

and the armature - AIT-System fixable to use the full

displacement also at low frequencies - Fully automatic pneumatic or electronic

load compensation for heavy test loads - Air-cooling blower - 55 kN is available as AIT or

LB trunnion system- 2 inch displacement (optional 3 inch) - Degauss kit to reduce stray magnetic field- Switchable to energy-saving mode - Optional Dual Bearing-System

for enhancement of cross axial stiffness and reduction of wear

- Wheels&Rails Option (Shaker is displaceable on rails)

- Multiple safety devices

Rated peak force (N)/(lbf) Sine/Random/Shock 55000/50000/110000 12364/11240/24729 55000/50000/110000 12364/11240/24729 55000/50000/110000 12364/11240/24729Frequency range (Hz) 5 - 3000 5 - 3000 5 - 3000 5 - 3000 5 - 2000 5 - 2000Max. rated travel (mm)/(inch) Pk - Pk 50.8** 2.0** 50.8** 2.0** 50.8** 2.0**Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98Max. acceleration (g) Sine/Random/Shock 100/100/264 100/100/264 100/100/224 100/100/224 70/70/160 70/70/160Suspension stiffness (N/mm) (lbf/inch) 200 1142 200 1142 200 1142Effective moving mass (kg)/(lb) 41.0 90.4 46.5 102.5 56.5 124.6Max. weight tested (kg)/(lb) 910 2006 910 2006 910 2006Main resonance frequency (Hz) >2100 >2100 >2100 >2100 2000 2000Weight with trunnion (kg)/(lb) AIT/LB 4350/3350 9590/7385 4350/3350 9590/7385 4350/3350 9590/7385Stray magnetic field (mT) with degauss kit <1 <1 <1 <1 <2 <2Armature (ø/mm)/(ø/inch) 340 13.4 440 17.3 640 25.2Max. power consumption at 400 V (kVA) Amplifier/Blower 63/27 63/27 63/27 63/27 63/27 63/27Interlocks Temperature, overtravel, Temperature, overtravel, Temperature, overtravel,

* AIT or LB

- AIT-System fixable to use the full displace-ment also at low frequencies

Water-cooled vibration systems 89 kN (20000 lbf) and 100 kN (22500 lbf)

TIRA water-cooled shakers are hydrostatically guided and coo-led by a closed-loop water cooling system. The external coolingunit also provides the guidance lubricant for the hydrostatic bea-rings which enable a frictionless guidance of the armature.Water-cooled vibration test systems have the advantage of gene-rating very high forces to test heavy payloads at high accelerati-on. Payloads of up to 910 kg (2006 lb) are possible.A built-in fully automatic, pneumatic operated load compensationsystem allows the realization of the nominal vibration displace-ment, even with heavy test loads.

- 2 inch displacement (optional 3 inch) - Optional Dual Bearing-System for enhancement of cross axial

stiffness and reduction of wear - Automatic permanent conductance monitoring of the cooling

water - Shaker water circuit with overpressure - Automatic centering of the AIT-System and the armature

Vibration Systems

System TV 59389/AIT-440 TV 59389/AIT-640Shaker S 59389/AIT-440 S 59389/AIT-640Amplifier A 5 40 3 203 A 5 40 3 203Cooling Unit C 59389 C 59389

Metric US Metric US

Rated peak force (N) (lbf) Sine/Random/Shock 89000/89000/178000 20000/20000/40000 89000/89000/178000 20000/20000/40000Frequency range (Hz) 5 - 3000 5 - 3000 5 - 2000 5 - 2000Max. rated travel (mm) (inch) Pk-Pk 50.8** 2** 50.8** 2**Max. velocity (m/sec) (inch/sec) Sine/Random/Shock 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98Max. acceleration (g) Sine/Random/Shock 100/100/200 100/100/200 60/60/120 60/60/120Suspension stiffness (kN/m) (lbf/inch) 70 399.7 70 399.7Effective moving mass (kg) (lb) 56.0 123.5 70.0 154.3Max. weight tested (kg) (lb) 910 2006 910 2006Main resonance frequency (Hz) > 2100 > 2100 > 1800 > 1800Weight with/without trunnion (kg) (lb) 4500/4100 9921/9039 4500/4100 9921/9039Stray magnetic field (mT) with degauss kit < 1 < 1 < 1 < 1Armature (ø/mm) (ø/inch) 440 17.3 640 25.2Max. power consumption at 400 V (kVA) incl. Cooling Unit 140 140 140 140Interlocks Temperature, overtravel, Temperature, overtravel,

overcurrent, compressed air, overcurrent, compressed air,water flow rate, water pressure water flow rate, water pressure

System TV 59410/AIT-440 TV 59410/AIT-640Shaker S 59410/AIT-440 S 59410/AIT-640Amplifier A 5 40 3 270 A 5 40 3 270Cooling Unit C 59389 C 59389

Metric US Metric US

Rated peak force (N) (lbf) Sine/Random/Shock 100000/89000/200000 22500/20000/45000 100000/89000/200000 22500/20000/45000Frequency range (Hz) 5 - 3000 5 - 3000 5 - 2000 5 - 2000Max. rated travel (mm) (inch) Pk-Pk 50.8** 2** 50.8** 2**Max. velocity (m/sec) (inch/sec) Sine/Random/Shock 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98Max. acceleration (g) Sine/Random/Shock 100/90/200 100/90/200 60/50/120 60/50/120Suspension stiffness (kN/m) (lbf/inch) 70 399.7 70 399.7Effective moving mass (kg) (lb) 56.0 123.5 70.0 154.3Max. weight tested (kg) (lb) 910 2006 910 2006Main resonance frequency (Hz) > 2100 > 2100 > 1800 > 1800Weight with/without trunnion (kg) (lb) 4500/4100 9921/9039 4500/4100 9921/9039Stray magnetic field (mT) with degauss kit < 1 < 1 < 1 < 1Armature (ø/mm) (ø/inch) 440 17.3 640 25.2Max. power consumption at 400 V (kVA) incl. Cooling Unit 175 175 175 175Interlocks Temperature, overtravel, Temperature, overtravel,

overcurrent, compressed air, overcurrent, compressed air,water flow rate, water pressure water flow rate, water pressure

**Optionally 3“ displacement

Vibration Systems

Water-cooled vibration systems from 168 kN(37768 lbf) to 300 kN (67443 lbf)

TIRA water-cooled shakers are hydrostatically guided and coo-led by a closed-loop water cooling system. The external coolingunit also provides the guidance lubricant for the hydrostatic bea-rings which enable a frictionless guidance of the armature.Water-cooled vibration test systems have the advantage of gene-rating very high forces to test heavy payloads at high accelerati-on. Payloads of up to 2500 kg (5512 lb) are possible.A built-in fully automatic, pneumatic operated load compensati-on system allows the realization of the nominal vibration displa-cement, even with heavy test loads.

- Optional Dual Bearing-System for enhancement of cross axialstiffness and reduction of wear

- Automatic permanent conductance monitoring of the coolingwater

- Shaker water circuit with overpressure- Automatic centering of the AIT-System and the armature - AIT-System fixable to use the full displacement

also at low frequencies

System TV 59416/AIT-590 TV 59420/AIT-590 TV 59430/AIT-840Shaker S 59416/AIT-590 S 59420/AIT-590 S 59430/AIT-840Amplifier A 5 85 3 293 A 5 85 3 338 A 5 00 3 360Cooling Unit C 59416 C 59416 C 59430

Rated peak force (N) (lbf) Sine/Random/Shock 168000/168000/336000 37768/37768/75536 200000/168000/400000 45000/37768/90000 300000/270000/600000 67443/60698/134885Frequency range (Hz) 5 - 2000 5 - 2000 5 - 2000 5 - 2000 5 - 2000 5 - 2000Max. rated travel (mm) (inch) Pk-Pk 50.8 2 50.8 2 50.8 (63.5 peak) 2(2.5 peak)Max. velocity (m/sec) (inch/sec) Sine/Random/Shock 1.8/1.8/2.5 71/71/98 1.8/1.8/2.5 71/71/98 2.0/2.0/3.0 79/79/118Max. acceleration (g) Sine/Random/Shock 100/100/250 100/100/250 100/100/250 100/100/250 125/100/250 125/100/250Rated current (A) 1800 1800 2250 2250 2400 2400Suspension stiffness (kN/m) (lbf/inch) 175 1000 175 1000 175 1000Effective moving mass (kg) (lb) 122 269 125 275.6 242 533.5Max. weight tested (kg) (lb) 1300 (7 bar) 2866 (700 kPa) 1300 (7 bar) 2866 (700 kPa) 2500 (6 bar) 5512 (600 kPa)Main resonance frequency (Hz) 1800 1800 1700 1700 1500 1500Weight with/without trunnion (kg) (lb) 8450/6200 18629/13669 8450/6200 18629/13669 18500/12600 40786/27778Stray magnetic field (mT) with degauss kit < 1 < 1 < 1 < 1 < 1 < 1Armature (ø/mm) (ø/inch) 590 23.2 590 23.2 840 33.1Interlocks Temperature, overtravel, Temperature, overtravel, Temperature, overtravel,

overcurrent, compressed air, overcurrent, compressed air, overcurrent, compressed air,water flow rate, water pressure water flow rate, water pressure water flow rate, water pressure

Calibration Shaker S 51140-C

Calibration Shaker

System TV 51110-C TV 51110-AC TV 51120-CShaker S 51110-C S 51110-AC S 51120-CAmplifier BAA 120 BAA 500-T BAA 500Blower - - SB 0080

Rated peak force (N)/(lbf) Sine/Random 100/50 22/11 100/50 22/11 200/100 45/22Frequency range (Hz) 40 - 25000 40 - 25000 DC - 25000 DC - 25000 40 - 25000 40 - 25000Max. rated travel (mm)/(inch) Pk - Pk 4 0.2 25.4 1.0 4 0.2Max. velocity (m/s)/(inch/sec) Sine/Random 1.2/1.2 47/47 1.2/1.2 47/47 1.2/1.2 47/47Max. acceleration (g) Sine/Random 25/12 25/12 17/8 17/8 51/25 51/25Effective moving mass (kg)/(lb) 0.40 0.88 0.53 1.17 0.40 0.88Main resonance frequency (Hz) >25000 >25000 >19000 >19000 >25000 >25000Weight with trunnion (kg)/(lb) 33 72.8 18 39.7 42 92.6Armature (ø/mm)/(ø/inch) 54 2.1 50 1.97 54 2.1Compressed air (bar)/(psi) 3 (app. 2.5 l/min) 43.5Max. power consumption at 230 V (kVA) Amplifier/Blower 0.08/- 0.08/- 0.35/- 0.35/- 0.35/0.46 0.35/0.46

Calibration shakers from 100 N (22.5 lbf) to1000 N (225 lbf)

In all fields of industry, in aviation, the automotive industry and inpower stations, vibration analyses and measurements for deter-mining the vibration transmission are increasingly carried out.A large variety of measuring sensors is necessary to realize suchinvestigations. These measuring sensors have to be checked fortheir accuracy and calibrated in defined time intervals.As most of the measuring sensors have a large measuring rangeand large frequency ranges, special shakers for calibrating thesesensors are required.TIRA has risen to this challenge and designed a unique shakerwhich meets these requirements. This newly developed shaker isequipped with a special guide system and a vibration systemmade of ceramic material. It is characterized by a very highutilizable frequency range up to 25 kHz and with the appropriatemeasuring equipment it is optimally suitable for professionalcalibration applications.The “AC” calibration shaker has additionally a special air bea-ring with the advantage of being frictionless, wear-free and dam-ping spurious oscillations.

System TV 51140-C TV 5220-CShaker S 51140-C S 5220-CAmplifier BAA 1000 BAA 1000-ETBlower SB 0140 SB 0140

Metric US Metric US

Rated peak force (N) (lbf) Sine / Random 400/200 90/45 1000/650 225/146Frequency range (Hz) 40-25000 40-25000 DC - 20000 DC - 20000Max. rated travel (mm) (inch) Pk-Pk 4 0.2 25.4 1.0Max. velocity (m/sec) (inch/sec) Sine / Random 1.2/1.2 47/47 1.5/1.5 59/59Max. acceleration (g) Sine / Random 68/34 68/34 66/43 66/43Effective moving mass (kg) (lb) 0.60 1.32 1.5 3.3Main resonance frequency (Hz) >19000 >19000 >19000 >19000Weight with trunnion (kg) (lb) 21 46.3 110 242.5Armature (ø/mm) (ø/inch) 54 2.1 130 5.12Max. power consumption at 230 V (kVA) Amplifier/FPS+Blower 1.22/1.4 1.22/1.4 2.1/2.4 2.1/2.4

The Modal exciter system TV 51130-MSC is a special develop-ment of TIRA to increase the mobility. The 350 N vibration exci-ter has an integrated air cooling to make an external coolingunit unnecessary.

Modal thruster S 51075-M Modal thruster S 51130-MSC

System TV 50101-M TV 5220-M TV 54216-M TV 50303-M TV 50350-MShaker S 50101-M S 5220-M S 54216-M S 50303-M S 50350-MAmplifier BAA 1000-ET BAA 1000-ET BAA 1000-ET A 1 01 1 003 T A 1 01 1 004 TBlower SB 0140 SB 0140 SB 0140 SB 0200 SB 0310

Metric US Metric US Metric US Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random 650/420 146/94 1000/650 220/146 1600/1000 360/220 2000/1000 450/220 2700/2000 607/450Frequency range (Hz) DC - 5000 DC - 5000 DC - 5000 DC - 5000 DC - 4000 DC - 4000 DC - 3000 DC - 3000 DC - 3000 DC - 3000Max. rated travel (mm)/(inch) Pk - Pk 50.8 2.0 50.8 2.0 50.8 2.0 50.8 2.0 50.8 2.0Max. velocity (m/s)/(inch/sec) Sine/Random 1.5/1.5 59/59 1.5/1.5 59/59 1.5/1.5 59/59 1.5/1.5 59/59 1.5/1.5 59/59Max. acceleration (g) Sine/Random 60/35 60/35 78/50 78/50 85/55 85/55 95/45 95/45 120/90 120/90Suspension stiffness (N/mm) (lbf/inch) ** ** ** ** ** ** ** ** ** **Effective moving mass (kg)/(lb) 1.3 2.9 1.3 2.9 1.9 4.2 2.2 4.9 2.3 5.1Main resonance frequency (Hz) >3000 >3000 >3000 >3000 >3000 >3000 >3000 >3000 >3000 >3000Weight with trunnion (kg)/(lb) 122 269.0 122 269.0 188 414.5 280 617.3 280 617.3Coupling (Thread ø/mm) M8 M8 M8 M8 M8 M8 M8 M8 M8 M8Max. power consumption at 230/400 V (kVA) A./B. 1.4/2.4 1.4/2.4 2.1/2.4 2.1/2.4 2.4/2.4 2.4/2.4 5 (incl. B.) 5 (incl. B.) 6 (incl. B.) 6 (incl. B.)

System TV 51075-M TV 51110-M TV 51120-M TV 51130-MSC TV 51140-MShaker S 51075-M S 51110-M S 51120-M S 51130-MSC S 51140-MAmplifier BAA 120 BAA 120 BAA 500 BAA 500-R2 BAA 1000Blower – – SB 0080 internal SB 0140

Metric US Metric US Metric US Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random 75/40 17/9 100/70 22/15 200/140 44/31 350/200 78/44 400/280 90/62Frequency range (Hz) DC - 5000 DC - 5000 DC - 5000 DC - 5000 DC - 5000 DC - 5000 DC - 500 DC - 500 DC - 5000 DC - 5000Max. rated travel (mm)/(inch) Pk - Pk 10 0.4 25.4 1.0 25.4 1.0 9 0.35 25.4 1.0Max. velocity (m/s)/(inch/sec) Sine/Random 1.5/1.5 59/59 1.5/1.5 59/59 1.5/1.5 59/59 1.3/1.3 51/51 1.5/1.5 59/59Max. acceleration (g) Sine/Random 60/35 60/35 43/30 43/30 86/60 86/60 40/20 40/20 100/71 100/71Suspension stiffness (N/mm) (lbf/inch) 3 17.1 4 22.8 4 22.8 70 400 4 22.8Effective moving mass (kg)/(lb) 0.125 0.28 0.23 0.51 0.23 0.51 0.5 1.10 0.4 0.88Main resonance frequency (Hz) >5000 >5000 >6000 >6000 >6000 >6000 >4000 >4000 >4000 >4000Weight with trunnion (kg)/(lb) 20 44.1 12 26.5 12 26.5 27 59.5 18 39.7Coupling (Thread ø/mm) M5 M5 M6 M6 M6 M6 M8 M8 M6 M6Max. power consumption at 230 V (kVA) Ampl./Blow. 0.07/- 0.07/- 0.08/- 0.08/- 0.35/0.46 0.35/0.46 0.35 (incl. B.) 0.35 (incl. B.) 1.22/1.4 1.22/1.4

These exciters are specifically designed formodal and structure analysis. Modal thrustersup to 400 N are excited by permanent mag-nets, with lightweight rare earth magnets pro-vided for mobile use. These thrusters arecharacterized by high cross-axial stiffness.From 650 N onwards, modal thrusters permit amax. displacement of 50.8 mm due to TMCcontrol. TMC is an electronic armature positioncontrol system for precisely coupling the modalthruster to the specimen. The armature datumadjustment allows the operator to offset thenominal position of the armature in relation tothe body. A preload can easily be set. Theaxial stiffness can also be adjusted electro-nically.A standard feature on all modal generators isa swivel-frame. This allows a great variety ofcoupling options.

Modal Thrusters

Modal thrusters from 75 N (17 lbf) to 2.7 kN (607 lbf)

Modal thruster S 55240-M/LSS

System TV 51010-M/LSS TV 57315-M/LSSShaker S 51010-M/LSS S 57315-M/LSSAmplifier* A 1 01 3 023 T A 3 01 3 030 TBlower SD 120 SD 120

Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random 11000/11000 2470/2470 15000/15000 3370/3370Frequency range (Hz) DC - 2000 DC - 2000 DC - 2000 DC - 2000Max. rated travel (mm)/(inch) Pk - Pk 102 4.0 102 4.0

Overtravel 107 4.21 107 4.21Mechanical stop 112 4.41 112 4.41

Max. velocity (m/s)/(inch/sec) Sine/Random 3.0/3.0 118/118 3.0/3.0 118/118Max. acceleration (g) Sine/Random 80/80 80/80 85/85 85/85Suspension stiffness (N/mm) (lbf/inch) ** ** ** **Effective moving mass (kg)/(lb) 14.0 30.9 18.0 39.7Main resonance frequency (Hz) >2500 >2500 >2500 >2500Weight with trunnion (kg)/(lb) 1450 3197 1450 3197Coupling (Thread ø/mm) M10 M10 M10 M10Max. power consumption at 400 V (kVA) incl. Blower 28.2 28.2 37.5 37.5

*Amplifier with BPS-1514 modules (150 V/150 A)

System TV 55240-M/LSS TV 56263-M/LSS TV 56280-M/LSSShaker S 55240-M/LSS S 56263-M/LSS S 56280-M/LSSAmplifier* A 1 01 3 023 T A 1 02 3 023 T A 1 02 3 023 TBlower SB 0310 SD 9 SD 9

Rated peak force (N)/(lbf) Sine/Random 4000/4000 900/900 6300/6300 1420/1420 8000/8000 1800/1800Frequency range (Hz) DC - 2000 DC - 2000 DC - 2000 DC - 2000 DC - 2000 DC - 2000Max. rated travel (mm)/(inch) Pk - Pk 102 4.0 102 4.0 102 4.0

Overtravel 107 4.21 107 4.21 107 4.21Mechanical stop 112 4.41 112 4.41 112 4.41

Max. velocity (m/s)/(inch/sec) Sine/Random 3.0/3.0 118/118 3.0/3.0 118/118 3.0/3.0 118/118Max. acceleration (g) Sine/Random 37/37 37/37 54/54 54/54 68/68 68/68Suspension stiffness (N/mm) (lbf/inch) ** ** ** ** ** **Effective moving mass (kg)/(lb) 11.0 24.3 12.0 26.5 12.0 26.5Main resonance frequency (Hz) >2500 >2500 >2500 >2500 >2500 >2500Weight with trunnion (kg)/(lb) 750 1653 850 1874 1000 2205Coupling (Thread ø/mm) M10 M10 M10 M10 M10 M10Max. power consumption at 400 V (kVA) incl. Blower 6.6 6.6 14.6 14.6 16 16

Modal Thrusters

Specially to meet the requirements for modaland structure analysis, TIRA offers a range ofmodal thrusters from 4 kN up to 15 kN. Thesegenerators are characterized by high cross-axial stiffness and permit a max. displacementof up to 102 mm (pk-pk) due to TMC control.

TMC is an electronic armature position controlsystem for precisely coupling the modal gene-rator to the specimen. The armature datum leveladjustment allows the operator to offset thenominal position of the armature in relation tothe body. A preload can easily be set. The axialstiffness can also be adjusted electronically.

The power amplifier can be run in current- orvoltage mode.A standard feature on all modal generators is aswivel-frame. This allows a great variety ofcoupling options.

Modal thrusters from 4 kN (900 lbf) to 15 kN (3370 lbf)

Inertial shaker S 51144-IN

System TV 51144-IN TV 51165-INShaker S 51144-IN S 51165-INAmplifier BAA 1000 BAA 1000Blower SB0140 SB0140

Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random 440/311 100/70 650/420 145/95Frequency range (Hz) DC - 2000 DC - 2000 DC - 2000 DC - 2000Max. rated travel (mm)/(inch) Pk - Pk 9 0.4 9 0.4Max. velocity (m/s)/(inch/sec) Sine/Random 1.5/1.5 59/59 1.5/1.5 59/59Max. acceleration (g) Sine/Random 2.8/2 2.8/2 2.8/1.8 2.8/1.8Suspension stiffness (N/mm) (lbf/inch) 56 319.8 98 559.6Effective moving mass (kg)/(lb) 0.63 1.4 0.85 1.9Weight (kg)/(lb) 16 35.3 24 52.9Coupling (Thread ø/mm) M12 M12 M12 M12Max. power consumption at 230 V (kVA) Ampl./Blow. 1.22/2.4 1.22/2.4 1.27/2.4 1.27/2.4

System TV 51112-IN TV 51125-INShaker S 51112-IN S 51125-INAmplifier BAA 120 BAA 500Blower – SB 0080

Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random 125/70 28/16 250/150 60/30Frequency range (Hz) DC - 2000 DC - 2000 DC - 2000 DC - 2000Max. rated travel (mm)/(inch) Pk - Pk 9 0.4 9 0.4Max. velocity (m/s)/(inch/sec) Sine/Random 1.5/1.5 59/59 1.5/1.5 59/59Max. acceleration (g) Sine/Random 0.98/0.54 0.98/0.54 2/1.2 2/1.2Suspension stiffness (N/mm) (lbf/inch) 20 114.2 20 114.2Effective moving mass (kg)/(lb) 0.35 0.8 0.35 0.8Weight (kg)/(lb) 13 28.7 13 28.7Coupling (Thread ø/mm) M12 M12 M12 M12Max. power consumption at 230 V (kVA) Ampl./Blow. 0.1/- 0.1/- 0.4/0.46 0.4/0.46

Inertial Systems

TIRA produces inertial systems (IN) in therange from 125 N to 650 N, which can bebolted directly to the structure and aligned atany angle within 360°. The generators have anexcellent lateral and axial stiffness. Excitationis made by permanent magnets, and a specialspring system provides optimal guidance sothat the full body mass can impact on thestructure.The generator is cooled by a maintenance-freefan, with cooling air entering through a filterassembly. As inertial generators from TIRAcan efficiently apply dynamic forces to largestructures, they have found their applications inmanufacturing, aerospace, buildings, civilengineering and shipbuilding.

Inertial systems from 125 N (28 lbf) to 650 N (146 lbf)

Long stroke shaker with 102 mm displacement(pk-pk)

Due to the ever increasing safety requirements the industry deve-lops a wide range of sensor technology and components thathave to be tested under extreme stress conditions.The test parameters are developing to match higher accelerationsin combination with large impact ranges. These tests cannot berealized with conventional standard systems offering a displace-ment of 50.8 mm (2").TIRA has met the requirements of the industry to manufacture testinstallations that can imitate extreme shock simulations. It deve-loped a series of long-stroke shakers with a displacement of102mm (4”, peak -peak).Apart from their application in laboratories for testing develop-ment problems the integration of these shakers in complete pro-duction lines has been a proven advantage.

System TV 51010/LSS-300 TV 57315/LSS-300Shaker S 51010/LSS-300 S 57315/LSS-300Amplifier* A 1 01 3 023 T A 3 01 3 030 TBlower SD 120 SD 120

Metric US Metric US

Rated peak force (N)/(lbf) Sine/Random/Shock 11000/11000/22000 2470/2470/4950 15000/15000/30000 3370/3370/6740Frequency range (Hz) DC - 2000 DC - 2000 DC - 2000 DC - 2000Max. rated travel (mm)/(inch) Pk - Pk 102 4.0 102 4.0

Overtravel 107 4.21 107 4.21Mechanical stop 112 4.41 112 4.41

Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 3.0/3.0/4.5 118/118/177 3.0/3.0/4.5 118/118/177Max. acceleration (g) Sine/Random/Shock 80/80/160 80/80/160 96/96/191 96/96/191Suspension stiffness (N/mm) (lbf/inch) ** ** ** **Effective moving mass (kg)/(lb) 14.0 30.9 16.0 35.3Main resonance frequency (Hz) >2000 >2000 >2000 >2000Weight with trunnion (kg)/(lb) 1450 3197 1450 3197Armature (ø/mm)/(ø/inch) 300 11.8 300 11.8Max. power consumption at 400 V (kVA) incl. Blower 28.2 28.2 37.5 37.5

*Amplifier with BPS-1514 modules (150 V/150 A)

System TV 55240/LSS-250 TV 56263/LSS-250 TV 56280/LSS-250Shaker S 55240/LSS-250 S 56263/LSS-250 S 56280/LSS-250Amplifier* A 1 01 3 023 T A 1 02 3 023 T A 1 02 3 023 T Blower SB 0310 SD 9 SD 9

Rated peak force (N)/(lbf) Sine/Random/Shock 4000/4000/8000 900/900/1800 6300/6300/12600 1420/1420/2830 8000/8000/16000 1800/1800/3600Frequency range (Hz) DC - 2000 DC - 2000 DC - 2000 DC - 2000 DC - 2000 DC - 2000Max. rated travel (mm)/(inch) Pk - Pk 102 4.0 102 4.0 102 4.0

Overtravel 107 4.21 107 4.21 107 4.21Mechanical stop 112 4.41 112 4.41 112 4.41

Max. velocity (m/s)/(inch/sec) Sine/Random/Shock 3.0/3.0/4.5 118/118/177 3.0/3.0/4.5 118/118/177 3.0/3.0/4.5 118/118/177Max. acceleration (g) Sine/Random/Shock 37/37/74 37/37/74 54/54/107 54/54/107 68/68/136 68/68/136Suspension stiffness (N/mm) (lbf/inch) ** ** ** ** ** **Effective moving mass (kg)/(lb) 11.0 24.3 12.0 26.5 12.0 26.5Main resonance frequency (Hz) >2000 >2000 >2000 >2000 >2000 >2000Weight with trunnion (kg)/(lb) 750 1653 850 1874 1000 2205Armature (ø/mm)/(ø/inch) 250 9.8 250 9.8 250 9.8Max. power consumption at 400 V (kVA) incl. Blower 6.6 6.6 14.6 14.6 16 16

Long Stroke Shaker

TIRA Slip Tables

OUR CONCEPT

TIRA slip tables are clearly designed and functional, whichmakes them easy to handle for smooth testing. Turning the shakerwill not limit conventional testing on the vibrating fixture. Stiffenedand welded structures at the base increase the reaction mass,while any undesirable transfer of vibration is damped. The linearguide system guarantees high stiffness of the slip plate and mini-mize cross vibration if the test setup is not symmetrical.

TIRA's Monobase slip tables are available in different versions:

Index XS: for vibration systems:TV 50101, TV 5220

Index S: for vibration systems:TV 50303, TV 50350, TV 54216

Index M: for vibration systems:TV 55240, TV 56263, TV 56280

Index L: for vibration systems:TV 51010, TV 57315

Index XL: for vibration systems:TV 59320, TV 59327, TV 59335

Index XXL for vibration systems:TV 59349, TV 59355, TV 59389, TV 59410

Index XXXL: for vibration systems:TV 59416, TV 59420

Vibration technology enables testing in research, developmentand quality assurance. As test objects become heavier and larger,electrodynamic generators can no longer be used.

SLIP TABLE MINIBASETIRA MINIBASE slip table: shaker in the origi-nal frame and sliding table module mountedtogether on a base plate.Available on request.

SLIP TABLE MONOBASETIRA MONOBASE slip table: shaker and slipplate are integrated in a common frame.

• customized solutions - our key to success• solutions from TIRA can meet any require-

ments you specify, with slip tables adjustedto all existing vibration/climatic chambersystems. Our products use high-gradematerials and reliable components for long-time use at low operating costs.

Slip plate 12’’

Slip plate 24’’

TIRA Slip Tables

TIRA slip tables

TESTING UNDER STRESSToday's equipment has to work in all kinds of environments in-cluding changes of temperature, vibration, and high humidity.From the design stage right through to final inspection, combinedvibration/climatic test systems can simulate the effect of environ-mental conditions on electric, electronic and mechanical compo-nents. Weak points can thus be detected at an early point andeliminated at low cost. Properly designed key parts will preventexpensive downtimes and/or damage. Such multi-test systems areindispensable for quality assurance, research and development.

DRIVER BARSTIRA driver bars provide the link between shaker and slip plate.They are FEM designed and made of magnesium. Depending onsize they are single pieces or welded together. Their geometricdesign enables perfect force transmission while minimizing themoving mass.

Driver bars are available for vibration generators with differentarmature diameters from 120 mm to 640 mm.

Our test systems guarantee your product functions.

VIBRATION ISOLATION, SAFE INSTALLATIONPneumatic isolation elements make it possible to install slip tableswithout expensive foundations. Due to the low natural frequencyof isolators (3 - 5 Hz), a wide test spectrum is applicable.

TEST OBJECT FIXINGTo simulate practical conditions, devices under test have to beexcited in their working position. TIRA has specific magnesiumfixtures for all applications.

Oil-film slip tables

With growing requirements on vibration test systems, there is aneed for slip table systems which can hold large and heavy speci-mens in a mounting position for testing in horizontal direction.

With monobase designs, you can quickly align and preciselycouple vibration generators to slip tables. These are available

Shaker S 50101-80 with slip table TGT MO 12 XS

Moving plate Limit Slip plate Slip plate Max. testing Dimension Max. pitch Max. roll Max. yaw working area weight thickness object weight L*W*H moment moment moment

(mm)/(inch) (mm)/(inch) (kg)/(lb) (mm)/(inch) (kg)/(lb) (mm)/(inch) (Nm)/(lbf inch) (Nm)/(lbf inch) (Nm)/(lbf inch)Metric US Metric US Metric US Metric US Metric US Metric US Metric US Metric US Metric US

TGT MO 12 XS 900*500*500 35.4*19.7*19.7TGT MO 12 S 305*305 12*12 62 2.44 8.5 18.7 40 1.57 100 220 1100*500*500 43.3*19.7*19.7 550 4868 550 4868 250 2213TGT MO 12 M 1300*800*700 51.2*31.5*27.6TGT MO 18 XS 1200*550*500 47.2*21.7*19.7TGT MO 18 S 458*458 18*18 62 2.44 18 39.7 40 1.57 300 661 1300*700*500 51.2*27.6*19.7 1600 14161 1600 14161 250 2213TGT MO 18 M 1300*780*700 51.2*30.7*27.6TGT MO 18 L 1300*800*1000 51.2*31.5*39.4TGT MO 20 XS 1300*600*500 51.2*23.6*19.7TGT MO 20 S 1300*800*500 51.2*31.5*19.7TGT MO 20 M 508*508 20*20 62 2.44 21.5 47.4 40 1.57 400 882 1400*900*700 55.1*35.4*27.6 2400 21242 2400 21242 250 2213TGT MO 20 L 1590*900*1000 62.6*35.4*39.4TGT MO 20 XL 1590*950*1200 62.6*37.4*47.2TGT MO 24 S 1400*900*500 55.1*35.4*19.7TGT MO 24 M 610*610 24*24 62 2.44 30 66.1 40 1.57 550 1213 1500*900*700 59.1*35.4*27.6 3880 34341 3880 34341 250 2213TGT MO 24 L 1700*800*1000 66.9*31.5*39.4TGT MO 24 XL 1700*900*1000 66.9*35.4*39.4TGT MO 30 M 1600*1000*1000 63*39.4*39.4TGT MO 30 L 762*762 30*30 62 2.44 46 101.4 40 1.57 1000 2205 1900*1000*1000 74.8*39.4*39.4 7600 67266 7600 67266 250 2213TGT MO 30 XL 2000*1400*1200 78.7*55.1*47.2TGT MO 36 L 2000*1200*1000 78.7*47.2*39.4TGT MO 36 XL 915*915 36*36 62 2.44 80.5 177.5 50 1.97 1750 3858 2200*1400*1200 86.6*55.1*47.2 12670 112139 12670 112139 250 2213TGT MO 36 XXL 2400*1700*1400 94.5*66.9*55.1TGT MO 39 L 2100*1300*1000 82.7*51.2*39.4TGT MO 39 XL 991*991 39*39 62 2.44 94 207.2 50 1.97 2200 4850 2300*1400*1260 90.6*55.1*49.6 16700 147807 16700 147807 250 2213TGT MO 39 XXL 2500*1700*1400 98.4*66.9*55.1TGT MO 48 L 2150*1350*1000 84.6*53.1*39.4TGT MO 48 XL 1200*1200 48*48 62 2.44 145 319.7 50 1.97 2400 5291 2350*1400*1200 92.5*55.1*47.2 19500 172589 19500 172589 250 2213TGT MO 48 XXL 2700*1700*1400 106.3*66.9*55.1TGT MO 60 L 2700*1800*1000 106.3*70.9*39.4TGT MO 60 XL 1500*1500 60*60 62 2.44 227 500.4 50 1.97 3500 7716 2900*1800*1200 114.2*70.9*47.2 25600 226579 25600 226579 250 2213TGT MO 60 XXL 3000*1700*1400 118.1*66.9*55.1TGT MO 70 L 3000*2100*1000 118.1*82.7*39.4TGT MO 70 XL 1800*1800 70*70 62 2.44 302 665.8 50 1.97 4000 8818 3100*2100*1200 122*82.7*47.2 30000 265522 30000 265522 250 2213TGT MO 70 XXL 3300*2000*1400 129.9*78.7*55.1TGT MO 78 XL 2000*2000 78*78 62 2.44 390 859.8 50 1.97 4500 9921 3400*2300*1400 133.9*90.6*55.1 34000 300925 34000 300925 250 2213TGT MO 78 XXL 3500*2300*1400 137.8*90.6*55.1

Effective frequency range 0 - 2000 Hz / please inquire for larger slip plates/other sizes

TIRA Slip Tables

with standard working areas of max. 2000 x2000 mm, other sizes can be produced onrequest. Oil-film slip tables consist of a precisiongrinded and lapped natural granite block witha magnesium plate that slides on an oil film.Four linear guides guarantee the lateralguidance of the slip plate and minimize trans-verse motion. Horizontal and vertical excitationis possible so that specimens may be tested intheir working position.

Vibration isolators are provided on the under-side of the frame as a standard feature to pre-vent vibration transfer to the building.

- Integrated oil pan - Non-contact displacement monitoring - 76,2 mm (3”) displacement possible - AIT-System fixable to use the full displace-

ment also at low frequencies

- Enclosed oil aggregate with return flowpump

- Integrated oil pan - Non-contact displacement monitoring - 76,2 mm (3”) displacement possible - AIT-System fixable to use the full displace-

ment also at low frequencies

Shaker S 56280/LS-180 with slip table TGT MOH 30 M

Moving plate Bearings Limit Slip plate Slip plate Max. testing Dimension Max. pitch Max. roll Max. yaw working area weight thickness object weight L*W*H moment moment moment

(mm)/(inch) (mm)/(inch) (kg)/(lb) (mm)/(inch) (kg)/(lb) (mm)/(inch) (Nm)/(lbf inch) (Nm)/(lbf inch) (Nm)/(lbf inch)Metric US Metric US Metric US Metric US Metric US Metric US Metric US Metric US Metric US

TGT MOH 24 M 1500*900*700 59.1*35.4*27.6TGT MOH 24 L 610*610 24*24 2 62 2.44 43.0 94.8 50 1.97 550 1213 1700*800*1000 66.9*31.5*39.4 26500 234544 25000 221268 22300 197371TGT MOH 24 XL 1700*900*1000 66.9*35.4*39.4TGT MOH 30 M 1600*1000*1000 63*39.4*39.4TGT MOH 30 L 762*762 30*30 2 62 2.44 56.0 123.5 50 1.97 1000 2205 1900*1000*1000 74.8*39.4*39.4 32200 284994 34000 300925 24700 218613TGT MOH 30 XL 2000*1400*1200 78.7*55.1*47.2TGT MOH 36 L 2000*1200*1000 78.7*47.2*39.4TGT MOH 36 XL 915*915 36*36 2 62 2.44 91.7 202.2 50 1.97 1750 3858 2200*1400*1200 86.6*55.1*47.2 47900 423950 45700 404478 34700 307120TGT MOH 36 XXL 2400*1700*1400 94.5*66.9*55.1TGT MOH 39 L 2100*1300*1000 82.7*51.2*39.4TGT MOH 39 XL 991*991 39*39 2 62 2.44 105.2 231.9 50 1.97 2200 4850 2300*1400*1260 90.6*55.1*49.6 66500 588574 59800 529274 44700 395628TGT MOH 39 XXL 2500*1700*1400 98.4*66.9*55.1TGT MOH 48 L 2150*1350*1000 84.6*53.1*39.4TGT MOH 48 XL 1200*1200 48*48 3 62 2.44 162.0 357.1 50 1.97 6000 13228 2350*1400*1200 92.5*55.1*47.2 91400 808957 82200 727530 56000 495641TGT MOH 48 XXL 2700*1700*1400 106.3*66.9*55.1TGT MOH 60 L 2700*1800*1000 106.3*70.9*39.4TGT MOH 60 XL 1500*1500 60*60 3 62 2.44 252.0 555.6 50 1.97 8000 17637 2900*1800*1200 114.2*70.9*47.2 167000 1478072 143000 1265654 99600 881533TGT MOH 60 XXL 3000*1700*1400 118.1*66.9*55.1TGT MOH 70 L 3000*2100*1000 118.1*82.7*39.4TGT MOH 70 XL 1800*1800 70*70 5 62 2.44 330 727.5 50 1.97 10000 22046 3100*2100*1200 122*82.7*47.2 260000 2301190 215000 1902907 125000 1106341TGT MOH 70 XXL 3300*2000*1400 129.9*78.7*55.1TGT MOH 78 XL 2000*2000 78*78 5 62 2.44 418 921.5 50 1.97 12000 26455 3400*2300*1400 133.9*90.6*55.1 320000 2832234 272000 2407399 182000 1610833TGT MOH 78 XXL 3500*2300*1400 137.8*90.6*55.1

Effective frequency range 0 - 2000 Hz / please inquire for larger slip plates/other sizes

Hydrostatically guided slip tables

Oil film slip tables with hydrostatic guidance from TIRA give youa compact system for a variety of vibration tests, including thoseof large and heavy specimens which generate high yaw, roll andpitch moments due to their high centers of gravity above the slipplate.These tables use high-pressure bearings with a separate hydrau-lic supply unit.

The monobase design enables rapid conversion from horizontalto vertical testing and the accurate alignment of vibration gene-rators relative to slip tables. Magnesium slip plates are availablein different sizes, up to a working area of max. 2000 x 2000 mm.Other (and larger) sizes can be produced on request. Oil-film slip tables consist of a precision grinded and lapped natu-ral granite block with a magnesium plate sliding on an oil film.

Hydrostatic slide bearings make it possible to apply the high yaw,roll and pitch moments as they appear with heavy test items orvery large loads which may have a high centre of gravity.Hydrostatically guided slip tables are used to test specimens in ahorizontal direction.

Vibration isolators are provided on the underside of the frame asa standard feature to prevent vibration transfer to the building.

TIRA Slip Tables

Load-bearing platform (guided head expander)FEM-designed head expander

TIRA offers a wide range of head expanders, L and T-type fixtu-res, cubes and special support systems. The latest software forFEM calculation and analysis is used so that customers get specifi-cally designed fixture assemblies with optimized and predicteddynamic performance to produce the best result.

Fixtures are often main items of application conditions inindustrial testing where specimens are tested to high standards ofprecision. This means that the fixture has to be optimized for boththe specimen and the test parameters. Many customers, however,can't do these sophisticated calculations to produce a suitable fix-ture. TIRA has met this challenge and will develop, calculate andmanufacture any type of special-purpose fixtures for your appli-cation, with the emphasis on minimizing its weight and optimizeits dynamic performance.

Monobase systems with a horizontal slip table and verticallyguided load-bearing platform make it possible to test extremelylarge and heavy loads in direction of x, y and z axis. Specially-designed slip tables and load-bearing platforms are availablewith a working area of max. of 2000 mm x 2000 mm (78 x78"). Slip plate and load-bearing platform are accurately alignedin a common base frame. Conversion from horizontal to verticaloperation is easy and takes a minimum of time.

Head Expanders and Fixtures

SQUARE VERSION without vibrodampSize Type Armature Height Weight

mm inch mm/ø inch/ø mm inch kg lb

250 x 250 10 x 10 THS 25-120 120 4.7 100 3.9 6.9 15.2300 x 300 12 x 12 THS 30-120 120 4.7 100 3.9 7.1 15.7

THS 30-180 180 7.1 100 3.9 7.55 16.6400 x 400 16 x 16 THS 40-180 180 7.1 100 3.9 16 35.3

THS 40-230 230 9.1 100 3.9 13.5 29.8500 x 500 20 x 20 THS 50-180 180 7.1 120 4.7 23.5 51.8

THS 50-230 230 9.1 150 5.9 28 61.7THS 50-340 340 13.4 180 7.1 34 75.0

600 x 600 24 x 24 THS 60-180 180 7.1 180 7.1 36 79.4THS 60-230 230 9.1 180 7.1 39 86.0THS 60-340 340 13.4 180 7.1 54 119.0THS 60-440 440 17.3 180 7.1 54 119.0

800 x 800 31 x 31 THS 80-440 440 17.3 180 7.1 95 209.4THS 80-640 640 25.2 120 4.7 80 176.4

1000 x 1000 39 x 39 THS 100-440 440 17.3 200 7.9 134 295.4THS 100-640 640 25.2 140 5.5 153 337.3

SQUARE VERSION with vibrodampSize Type Armature Height Weight

300 x 300 12 x 12 THS 30-120V 120 4.7 100 3.9 17.0* 37.5*THS 30-180V 180 7.1 100 3.9 24.0* 52.9*

400 x 400 16 x 16 THS 40-180V 180 7.1 100 3.9 20.3* 44.8*THS 40-230V 230 9.1 120 4.7 35.3* 77.8*

500 x 500 20 x 20 THS 50-180V 180 7.1 150 5.9 42.0* 92.6*THS 50-230V 230 9.1 180 7.1 51.0* 112.4*THS 50-340V 340 13.4 180 7.1 54.0* 119.0*

600 x 600 24 x 24 THS 60-180V 180 7.1 180 7.1 58.5* 129.0*THS 60-230V 230 9.1 180 7.1 81.0* 178.6*THS 60-340V 340 13.4 180 7.1 81.0* 178.6*THS 60-440V 440 17.3 180 7.1 81.0* 178.6*

800 x 800 31 x 31 THS 80-440V 440 17.3 180 7.1 142.5* 314.2*THS 80-640V 640 25.2 120 4.7 120.0* 264.6*

1000 x 1000 39 x 39 THS 100-440 440 17.3 200 7.9 201.0* 443.1*THS 100-640 640 25.2 140 5.5 229.5* 506.0*

* may vary by 10 %

CIRCULAR VERSION with vibrodampSize Type Armature Height Weight

400 16THR 40-180V 180 7.1 120 4.7 15.0* 33.1*THR 40-230V 230 9.1 120 4.7 18.0* 39.7*THR 50-180V 180 7.1 150 5.9 30.0* 66.1*

500 20 THR 50-230V 230 9.1 150 5.9 36.0* 79.4*THR 50-340V 340 13.4 150 5.9 42.0* 92.6*THR 60-180V 180 7.1 210 8.3 43.5* 95.9*

600 24 THR 60-230V 230 9.1 210 8.3 60.0* 132.3*THR 60-340V 340 13.4 210 8.3 72.0* 158.7*THR 80-340V 340 13.4 230 9.1 103.5* 228.2*

800 31 THR 80-440V 440 17.3 245 9.6 123.0* 271.2*THR 80-640V 640 25.2 180 7.1 100.5* 221.6*

1000 39THR 100-440V 440 17.3 305 12.0 214.5* 472.9*THR 100-640V 640 25.2 235 9.3 189.0* 416.7*

* may vary by 10 %

CIRCULAR VERSION without vibrodampSize Type Armature Height Weight

250 10THR 25-120 120 4.7 80 3.1 3.7 8.2THR 25-180 180 7.1 80 3.1 4.3 9.5

300 12THR 30-180 180 7.1 80 3.1 5.6 12.3THR 30-230 230 9.1 80 3.1 26.7 58.9

400 16THR 40-180 180 7.1 120 4.7 10.0 22.0THR 40-230 230 9.1 120 4.7 12.0 26.5THR 50-180 180 7.1 150 5.9 20.0 44.1

500 20 THR 50-230 230 9.1 150 5.9 24.0 52.9THR 50-340 340 13.4 150 5.9 28.0 61.7THR 60-180 180 7.1 210 8.3 29.0 63.9

600 24 THR 60-230 230 9.1 210 8.3 40.0 88.2THR 60-340 340 13.4 210 8.3 48.0 105.8THR 80-340 340 13.4 230 9.1 69.0 152.1

800 31 THR 80-440 440 17.3 245 9.6 82.0 180.8THR 80-640 640 25.2 180 7.1 67.0 147.7

1000 39THR 100-440 440 17.3 305 12.0 143.0 315.3THR 100-640 640 25.2 235 9.3 126.0 277.8

Head Expanders

TIRA head expanders are manufactured from magnesium andprovide an expansion of the armature table up to a ratio of 2:1.The unique design of the head expanders allows tests up to 2000Hz. Head expanders especially provided with 'vibrodamp' canbe subjected to test frequencies above 1000 Hz. This dampingprocess reduces amplification of upper frequency resonances.Apart from the range of standard head expanders TIRA alsooffers customized fixtures for round, square or rectangular wor-king areas.

Cube - FixtureType Size mm Size inchFix-C 20 200 x 200 mm 8 x 8 inchFix-C 25 250 x 250 mm 10 x 10 inchFix-C 30 300 x 300 mm 12 x 12 inchFix-C 40 400 x 400 mm 16 x 16 inch

T - FixtureType Size mm Size inchFix-T 20 200 x 200 mm 8 x 8 inchFix-T 26 260 x 260 mm 10 x 10 inchFix-T 30 300 x 300 mm 12 x 12 inchFix-T 40 400 x 400 mm 16 x 16 inch

L - FixtureType Size mm Size inchFix-L 20 200 x 200 mm 8 x 8 inchFix-L 26 260 x 260 mm 10 x 10 inchFix-L 30 300 x 300 mm 12 x 12 inchFix-L 40 400 x 400 mm 16 x 16 inch

L-fixtures

T-fixtures

To perform multi-axis vibration testing, L & T fixtures and cubicdesigns, as well as specially-engineered support fixtures, can beproduced to meet any particular test requirements.

The unique design of the fixtures allows tests up to 2000 Hz.

TIRA also offers customized fixtures for round, square or rectan-gular working areas.

Fixtures

Temperature/Climatic Test Systems

The quality, reliability, and safety of products require utmost carefrom the concept to the end-user.To meet this ambitious requirement, one nowadays investigatesthe interactions between objects and their direct or indirectenvironment by means of environment-testing systems. Basedupon such experience, products are developed with reference tospecific applications as well as high quality and long lifetime.Such flaws as material and production faults can be detectedearly and costly breakdowns or callback actions are avoided.In practical use, the products are exposed to various environ-mental influences at the same time such as e.g. temperature,humidity, vibrations, and transport loads. User-specific one-sidedtest systems are used as combinations in the test setup and linkedto form full test systems. TIRA delivers full test systems from onesource.

Product range:• Chambers for simulating environmental conditions

(temperature, air humidity, pressure, irradiation, vibration)

• Temperature shock testing installations(air/air, liquid/liquid, horizontal, vertical)

• Corrosion test chambers and devices for artificial weathering(salt nebulization, air pollutants, ultraviolet irradiation)

• Combined vibration chamber systems(complete vertical and horizontal solutions)

• Walk-in special installations(air-bag test chambers, sunlight simulation, open-plan cells)

With TIRAvibro a series of vibration testingchambers for combined testing proceduresunder climatic and thermic influences andmechanical and dynamic loading was develo-ped.The climate- and temperature-testing chamberscan be adapted to any vertical and horizontalvibration system. They are especially optimisedfor the operation with TIRA vibration testinginstallations and for the integration in completeTIRA systems. Due to the integration in systemsolutions the testing chamber and the shakercan be operated by a common test software(TEC). Exchangeable or fixed base plates arethe interface for coupling the shaker to the testchamber. In dependence on the kind of vibrati-on test a permanently installed base plate ortwo flexible base plates are inserted into thetest chamber.

Integration of vibra-tion generator intoclimatic chamber

Head extender

Integration of sliptable into climaticchamber

GRAPHICAL FUNCTIONS • Fully-configurable layout of charts • Display of several charts on the monitor • Several colours to be chosen for the curves • Enable/disable of chart display and grids • Real time update of charts

Thermobarriers for headexpandersSize Height Weight

mm inch mm inch kg lb

300 x300 12 x 12 20 0.8 4.3 9.5400 x 400 16 x 16 20 0.8 7.7 17.0500 x 500 20 x 20 20 0.8 12 26.5600 x 600 24 x 24 20 0.8 17.3 38.1800 x 800 31 x 31 20 0.8 30.7 67.7

1000 x 1000 39 x 39 20 0.8 51.1 112.7

Climatic chamber leadthroughsDiameter Height (Standard)*

mm inch mm inch

120 4.7 80-140 (100) 3.1-5.5 (3.9)130 5.1 80-140 (100) 3.1-5.5 (3.9)180 7.1 80-140 (100) 3.1-5.5 (3.9)230 9.1 80-140 (100) 3.1-5.5 (3.9)340 13.4 80-140 (100) 3.1-5.5 (3.9)440 17.3 80-140 (100) 3.1-5.5 (3.9)640 25.2 80-140 (100) 3.1-5.5 (3.9)

*Thickness of chamber floor

Weight on request

Temperature/Climatic Test Systems

TIRA has developed a new leadthrough for the operation ofshakers with climatic chambers. This leadthrough allows in com-parison to the previous systems with headextender and massivethermobarrier plate a significant better configuration of thetemperature differences. This enhancement is achieved by a spe-cial honeycomb structure of the armature sided plate and theintermediate plates at which the isolation is substantially in-creased by a displaced arrangement of the inner fins (Thermalconduction only by the outer ring and the bolted connection). Thisway an operation of sensitive climate with higher dew points isbetter possible. Therefore more constant temperature conditionsfor the test material are present. The condensation of humidity outof the testing air is reduced considerably. At cooling operation ofthe chamber the shaker inside is better protected againstcondensation.

The new model offers by the honeycomb structure in addition tothe significantly enhanced isolation attributes also a weightadvantage of about 30%.

WinKratos Control Software

WinKratos is the new generation control and management systemrunning under Windows XP/Vista/7.WINKRATOS offers many innovative features and it allows theuser to: • Create test programs • Refer to and modify previously created test programs • Delete all test programs that are no longer necessary • Print any test program in text format

MAIN FEATURES • Connection to the micro-PLC through the serial port. RS232

for connection to a single chamber, RS422 for multi dropconnection of up to 16 chambers

• Colour printing of all diagrams • Multiple access, password level

Thermobarriers for headexpandersDiameter Height Weight

250 9.8 20 0.8 2.4 5.3300 11.8 20 0.8 3.4 7.5400 15.8 20 0.8 6 13.2500 19.7 20 0.8 9.4 20.7600 23.6 20 0.8 13.6 30.0800 31.5 20 0.8 24.1 53.11000 39.4 20 0.8 37.7 83.1

Thermobarriers for slip tablesSize Height Weight

305 x 305 12 x 12 20 0.8 4.5 9.9458 x 458 18 x 18 20 0.8 10.1 22.3508 x 508 20 x 20 20 0.8 12.4 27.3610 x 610 24 x 24 20 0.8 17.9 39.5762 x 762 30 x 30 20 0.8 27.9 61.5915 x 915 36 x 36 20 0.8 40.2 88.6991 x 991 39 x 39 20 0.8 47.1 103.8

1200 x 1200 48 x 48 20 0.8 72.1 159.01500 x 1500 60 x 60 20 0.8 112.5 248.01800 x1800 70 x 70 20 0.8 162.4 358.0

Leadthrough

Silencer HRD 7/FU-SIAcoustic enclosure HRD 7/FU-AE

Blower Engine Dimension Air Hose Weight SoundpressureDesignation Air amount Performance Phase Voltage Frequency L/W/H Diameter Length level (max.)

m3/h kW V Hz mm inch mm inch m inch kg lb dB(A)SB 0080 80 0.37 1 115/230 50 246/256/247 9.7/10.1/9.7 40 1.57 3 118 10 22.0 58SB 0140 140 1.1 1 115/230 50 285/269/302 11.2/10.6/11.9 50 1.97 3 118 16 35.3 63SB 0200 210 1.3 3 230/400 50 334/314/337 13.1/12.4/13.3 60 2.36 5 197 20 44.1 66SB 0310 315 2.2 3 230/400 50 381/377/384 15/14.8/15.1 60 2.36 5 197 29 63.9 69SD 9 870 7.0 3 400 50 560/695/650 22/27.4/25.6 100 3.94 5 197 104 229.3 84SD 120 1140 11.5 3 400 50 600/676/675 23.6/26.6/26.6 100 3.94 5 197 131 288.8 87RD 8 3300 5.5 3 400 50 845/540/915 33.3/21.3/36 150 5.91 5 197 95 209.4 98HRD 7/FU/11 5820 11 3 400 50 611/692/700 24.1/27.2/27.6 150 5.91 5 197 92 202.8 103HRD 7/FU/20 5820 20 3 400 50 611/692/700 24.1/27.2/27.6 175 6.89 5 197 110 242.5 106

Blower Acoustic Enclosure SilencerDesignation Designation Dimension (LxWxH) Weight Noise Reduction* Designation Dimension(LxD) Weight Noise Reduction*

mm inch kg lb dB(A) mm inch kg lb dB(A)SB 0080 SB 0080-AE 795 x 699 x 841 31.3 x 27.5 x 33.1 – – 15-23 SB 0080-SI 310 x 65 12.2 x 2.6 0.8 1.76 5SB 0140 SB 0140-AE 795 x 699 x 841 31.3 x 27.5 x 33.1 – – 15-23 SB 0140-SI 308 x 82 12.1 x 3.2 0.35 0.77 8SB 0200 SB 0200-AE 795 x 836 x 841 31.3 x 32.9 x 33.1 – – 15-23 SB 0200-SI 308 x 82 12.1 x 3.2 0.5 1.10 6SB 0310 SB 0310-AE 795 x 836 x 841 31.3 x 32.9 x 33.1 – – 15-23 SB 0310-SI 308 x 82 12.1 x 3.2 0.5 1.10 6SD 9 SD 9-AE 1094 x 1000 x 1086 43.0 x 39.4 x 42.8 153 337 5-23 SD 9-SI 1012 x 150 39.8 x 5.9 1.2 2.65 3-6SD 120 SD 120-AE 1094 x 1000 x 1086 43.0 x 39.4 x 42.8 153 337 5-23 SD 120-SI 1100 x 160 43.3 x 6.3 1.2 2.65 3-6RD 8 RD 8-AE 1094 x 1179 x 1271 43.0 x 46.4 x 50.0 185 408 5-23 RD 8-SI 1200 x 340 47.2 x 13.4 3.3 7.27 6-10HRD 7/FU HRD 7/FU-AE 1094 x 1000 x 1086 43.0 x 39.4 x 42.8 153 337 5-23 HRD 7/FU-SI 1120 x 280 44.1 x 11.0 9.2 20.3 9-15

* Depending on frequency

Blowers are used for cooling the shakers. TIRA exclusively offersradial-flow fans that provide an above-average cooling perfor-mance in comparison with axial blowers.

In addition to this, silencers for damping the blow-off noise areoffered.

An aerated sound-absorbing chamber is offered for installing thecooling blower in closed rooms. The low-maintenance blower canalso be installed outdoors.

Blowers/Silencers

Blower SD 9

Cooling Unit C 59389 C 59416Environmental conditions:

Temperature ( °C / °F ) 5-30 / 41-86 5-30 / 41-86Relativ humidity ( % ) 10-80 10-80

Energy transfer, max. (kW) 3 3Process water:

Water temperature ( °C / °F ) 5-30 / 41-86 5-30 / 41-86Volumeflow at max. supply temperature ( m3/h / ft3/min ) 10 / 5.89 14 / 8.25

Working pressure: supply - static ( bar / kPa ) ≤ 8 / ≤ 800 ≤ 8 / ≤ 800Dynamic differential pressure ( bar / kPa ) ≥ 3 / ≥ 300 ≥ 3 / ≥ 300

Max. cooling load ( kW ) 110 160

Water Cooling Unit

The cooling unit includes the complete primary circuit of shakercooling system for the TIRA water-cooled shakers and the hydrau-lics of the shaker’s hydrostatic bearing.

The unit is designed as a compact mobile device. Primary circuitis based on deionised water. The extraction of the heat is carriedout by a customer-provided secondary-process water circuit.Pressure gauges and flow indicators are available at many posi-tions.

The device includes its own control circuit based on PLC. The frontand side walls are designed with swing doors to ensure a goodaccessibility to all built-in components. The connections to the sha-ker are accomplished by hoses with self-sealing couplings thatare free from leakage.

By the over pressure in the shaker circuit the unwanted formationof air bubbles (Cavitation) is avoided.

Analog Power Amplifiers

Amplifer BAA 1000 BAA 1000-E BAA 1000-ETKVA ratings 1200 VA 1200 VA 1200 VAFrequency range 2 Hz - 20 kHz 2 Hz - 20 kHz DC- 20 kHzVoltage-/Current mode yes/yes yes/yes yes/noVoltage, max. 72 V 72 V 72 VCurrent, max. 18 A 18 A 18 AOptimal load resistance 4 Ohm 4 Ohm 4 OhmSignal input voltage < 5 V < 5 V < 5 VDistortion < 0.1 % < 0.1 % < 0.1 %Signal to noise ratio > 90 dB > 90 dB > 90 dBField supply no yes (external) yes (external + TMC)Field voltage, max. – 70 V 70 VField current, max. – 3.2 A 3.2 AWeight (kg) (lb) 45 99.2 72 158.7 76 167.6Size (WxHxD) (mm) (inch) 483 x 190 x 600 19 x 7.5 x 23.6 483 x 320x 600 19 x 12.6 x 23.6 483 x 400 x 600 19 x 15.7 x 23.6Interlocks Overload Overload Overload

Temperature Temperature TemperatureClipping Clipping Clipping

Amplifer BAA 60 BAA 120 BAA 500KVA ratings 60 VA 120 VA 500 VAFrequency range DC- 20 kHz DC- 20 kHz DC- 20 kHzVoltage-/Current mode yes/no yes/yes yes/yesVoltage, max. 16 V 22 V 45 VCurrent, max. 3.8 A 5.5 A 11.2 AOptimal load resistance 4 Ohm 4 Ohm 4 OhmSignal input voltage < 5V < 5V < 5VDistortion < 0.1 % < 0.1 % < 0.1 %Signal to noise ratio > 90 dB > 90 dB > 90 dBField supply no no noField voltage, max. – – –Field current, max. – – –Weight (kg) (lb) 12 26.5 16 35.3 25 55.1Size (WxHxD) (mm) (inch) 483 x 90 x 450 19 x 3.5 x 17.7 483 x 90 x 450 19 x 3.5 x 17.7 483 x 90 x 450 19 x 3.5 x 17.7Interlocks Overload Overload Overload

TIRA offers a new series of analog amplifiers with a rated sinu-soidial power output up to 1200 VA. The modules control all per-manent magnetic shakers as well as shakers in connection withan internal field excitation up to 1600 N.These amplifiers, equipped with highly-advanced MOSFET tran-sistors, can be run in the current or the voltage mode, as desired.The amplifiers are user-friendly because of their background-litmultifunctional display.A safety management system monitors functions such as tempe-rature, overcurrent and overtravel and avoids the destruction ofthe amplifier in case of short circuit.A high signal-to-noise ratio and a low distortion factor areoutstanding features. Selectable ranges of operating voltage andcurrent range limiting are preconditions for the fact that TIRAamplifiers can be readily adapted to other shakers from othermanufacturers.Optionally, the amplifiers are designed for connecting the elec-tronic zero-adjustment unit “Tira Middle Control“ (TMC), whichmakes even with small longstroke-shakers a load compensationfor achieving the nominal displacement possible.Optionally a remote control in hardware or software is availa-ble (from BAA 500).

Amplifier A 1 01 1 003 A 1 01 1 004 A 1 01 1 010KVA ratings 2.7 kVA 4.2 kVA 11 kVAFrequency range DC - 4 kHz DC - 4 kHz DC - 4 kHzVoltage, max. 105 V 105 V 105 VCurrent, max. 25 A 40 A 100 AOptimal load resistance 4.2 Ohm 2.6 Ohm 1 OhmSignal input voltage (switchable) 2.5/5/10 V 2.5/5/10 V 2.5/5/10 VDistortion < 0.5 % < 0.5 % < 0.5 %Signal to noise ratio > 90 dB > 90 dB > 90 dBField supply internal internal internalField voltage, max.* 100 V 100/180 V 180 VField current, max.* 6 A 6 A 6 AWeight (Kg) / (lb) 234 515.9 225 496.0 250 551.2Size (W x H x D) (mm)/(inch) 600 x 1800 x 800 23.6 x 70.9 x 31.5 600 x 1800 x 800 23.6 x 70.9 x 31.5 600 x 1800 x 800 23.6 x 70.9 x 31.5Interlocks Overload Overload Overload

and more and more and more

Amplifier A 1 02 1 010 A 1 01 1 015 A 1 02 1 015KVA ratings 11 kVA 16 kVA 16 kVAFrequency range DC - 4 kHz DC - 4 kHz DC - 4 kHzVoltage, max. 105 V 105 V 105 VCurrent, max. 100 A 150 A 150 AOptimal load resistance 1 Ohm 1 Ohm 1 OhmSignal input voltage (switchable) 2.5/5/10 V 2.5/5/10 V 2.5/5/10 VDistortion < 0.5 % < 0.7 % < 0.7 %Signal to noise ratio > 90 dB > 90 dB > 90 dBField supply internal internal internalField voltage, max.* 280 V 140 V 280 VField current, max.* 6 A 8 A 6 AWeight (Kg) / (lb) 290 639.3 380 837.8 360 793.7Size (W x H x D) (mm)/(inch) 600 x 1800 x 800 23.6 x 70.9 x 31.5 600 x 1800 x 800 23.6 x 70.9 x 31.5 600 x 1800 x 800 23.6 x 70.9 x 31.5Interlocks Overload Overload Overload

and more and more and more* variable according to customer specification

Digital Power Amplifiers

TIRA power amplifiers are built with cascadable 22.5 kVAmodules, designed according to the latest technologicaldevelopments. Highly-advanced MOSFET power transistorscombined with a complete module management guaranteea high output power at highest safety.On the LCD-touch screen display the module status with cur-rent indication, the percental modulation of the modulesand the error diagnostics are shown. A safety monitoringunit protects the amplifier from short circuit and from a pos-sible destruction of the modules.Error indication and system parameters in plain text increa-se the availability thanks to a faster diagnostics. The highclock frequency of 82 kHz allows test frequencies of up to4000 Hz without any decrease in power possible. The cas-cading of the modules allows an amplifier design up to 540kVA at low floor space requirement.The output voltage of the modules can be modified so thatTIRA amplifiers can be adapted to almost all shakers exi-sting on the market.

The BPS 1016-PG/1514-PG is a switched high power amplifier, which canbe connected to an external BPS 15-1 M (M/R) master module. A special fea-ture allows this amplifier to be connected to single ended shaker systems.This product is designed with the latest technology and manufacturingmethods. Modern POWER MOSFET- transistors, in MDmesh II technology,combined with state-of-the-art multi-chip technology for the module manage-ment allows very high output power, combined with a maximum of perfor-mance and safety. It may be paralleled for increased current output; therefo-re a customized system can be realized very easily.

Amplifier A 3 01 3 030 A 3 07 3 030 A 3 08 3 040KVA ratings 34 kVA 34 kVA 45 kVAFrequency range DC - 4 kHz DC - 4 kHz DC - 4 kHzVoltage, max. 150 V 150 V 150 VCurrent, max. 225 A 225 A 300 AOptimal load resistance 1 Ohm 1 Ohm 1 OhmSignal input voltage (switchable) 2.5/5/10 V 2.5/5/10 V 2.5/5/10 VDistortion < 0.7 % < 0.7 % < 0.7 %Signal to noise ratio > 90 dB > 90 dB > 90 dBField supply internal internal internalField voltage, max.* 140 V 85 V 105 VField current, max.* 8 A 85 A 75 AWeight (Kg) / (lb) 515 1135.4 570 1256.7 585 1289.7Size (W x H x D) (mm)/(inch) 600 x 2200 x 800 23.6 x 86.6 x 31.5 600 x 2200 x 800 23.6 x 86.6x 31.5 600 x 2200 x 800 23.6 x 86.6 x 31.5Interlocks Overload Overload Overload

and more and more and more* variable according to customer specification

BPS 1016-PGDC Power input 80 V to 170 V

Output current RMS @ Sine 150 AOutput voltage RMS @ Sine 105 V / Load dependent

Output power @ Sine 16 kVAOptimum impedance for Sine 0.7 Ohm

Max. output voltage p-p @ Sine ± 149 VMax. output current p-p @ Sine ± 212 A

Optimum impedance for nom Noise 0.35 OhmMax. output voltage p-p @ nom Noise ± 158 VMax. output current p-p @ nom Noise ± 450 A

Frequency range @ full power - 1dB DC to 3 kHzDimensions W x H x D 482 mm x 132 mm x 630 mm

Weight 43 kgProtection circuits Overtemperature control

Overcurrent RMS controlOvercurrent p-p protection + / -DC input power controlInternal short circuit protection

BPS 1514-PGDC Power input 80 V to 270 V

Output current RMS @ Sine 150 AOutput voltage RMS @ Sine 150 V / Load dependent

Output power @ Sine 22.5 kVAOptimum impedance for Sine 1.0 Ohm

Max. output voltage p-p @ Sine ± 212 VMax. output current p-p @ Sine ± 212 A

Optimum impedance for nom Noise 0.54 OhmMax. output voltage p-p @ nom Noise ± 242 VMax. output current p-p @ nom Noise ± 450 A

Frequency range @ full power - 1dB DC to 3 kHzDimensions W x H x D 482 mm x 176 mm x 610 mm

Weight 43 kgProtection circuits Overtemperature control

Overcurrent RMS controlOvercurrent p-p protection + / -DC input power controlInternal short circuit protection

Power modules BPS 1016-PG / BPS 1514-PG for grounded systems

Features: - High Signal to Noise Ratio of >90 dB - Protection rating min. IP 20 - Integrated field power supply - Integrated mains switch and line filter - Lo-Field/Hi-Field button

(Energy-saving mode) - ESD monitoring

(Protection of the system against damage) - Noise button - Input voltage analyser - Voltage-clipping limiter to avoid clipping - 3 Σ peak current

A 5 85 3 338 A 5 00 3 360338 kVA 360 kVA

DC - 4 kHz DC - 4 kHz150 V 150 V

2250 A 2400 A1 Ohm 1 Ohm

2.5/5/10 V 2.5/5/10 V< 0,7 % < 0,7 %> 90 dB > 90 dBinternal external240 V 320 V355 A 251 A

3100 6834.3 2800 kg (External field supply: 600 kg)2800 x 2400 x 1000 110-2 x 94.5 x 39.4 2800 x 2400 x 1000 (Field supply: 600 x 1800 x 800)

Overload OverloadTemperature Temperature

Clipping Clippingand more and more

* variable according to customer specification

AmplifierKVA ratingsFrequency rangeVoltage, max.Current, max.Optimal load resistanceSignal input voltage (switchable)DistortionSignal to noise ratioField supplyField voltage, max.*Field current, max.*Weight (Kg) / (lb)Size (W x H x D) (mm)/(inch)Interlocks

The phase control unit is used for combining multi-ple shakers and coordinating the thrust in magnitu-de and phase. The supervisor is used to control allrelevant signals.

Features (Phase control):• Multi shaker control of up to 6 shakers• Push-Pull and Push-Push configuration switch• Accurate control of LF and HF phase• Master gain and bypass configuration switch• LED front panel for magnitude and phase• Electronic master gain overload protection

Features (Supervisor):• High speed signal handling• Accurate control of error messages

Control Units

Phase Control Unit & Supervisor

BPS 24-S Remote Control The BPS 24-S Remote Control is an intelligent interface to remo-te a single BPS 15-1 master module and the connected amplifiersystem.The communication between BSP 24-S Remote Control and BPS15-1 master module is established by a RS485 connection.

Features:• up to 1000 m distance• integrated emergency stop• shows all status information• shows all error information• voltage and current monitor• electronic gain• adjustable time-ramp for gain, start, stop and shutdown• different profiles can be saved• Dimension W x H x D (mm): 482 x 132 x 450• Weight (kg): 10

The digital input and output channels of VibPilot can be used versatile in test operations. At combined climatic andvibration tests or also when function tests of payloads have to be done simultaneously, external control signals can beprocessed directly. The VibControl software has the necessary functions to fully automate the test procedures. For longlasting tests you keep the full control: Test status reports are sent per mail or directly as SMS message to your mobilephone.

for Random-, Sine-, Shock-, SoR-, RoR-Excitation. Resonancedwell, SRS, Time Signal-Replication (Street simulation). 4 to 32simultaneous input channels. Multi-Signalprocessor-Architecture.Extensive signal analysing programs incl. Sine-, Transient-, andModal analysis, Analysis program for rotating machines, acou-stic analysis, signal generator.

PUMA is based on the innovative CATS architecture (ComputerAided Test Suite). PUMA is optimised for „Multi Tasking“ and isbased on the industry-standards for network connection and dataexchange protocols. PUMA makes your complete test cycle time-saving and more efficient.

PUMA offers a wide range of options for integration with condi-tioning cabinets and other test equipment. The unique “Client/-Server” architecture allows the automation of test functions in thetest laboratory. PUMA allows monitoring and complete control ofthe test over network and even internet. With the help of theActiveX automation option, control- and analysis functions can befit into higher-level program flows by using Visual Basic, C++.JAVA or National Instrument LabView™.

The VibControl Vibration Control software finds in our VibPilotHardware platform an ideal completion for comprehensive vibra-tion tests. The 4/8-channel VibPilot is an all-rounder, that hasbeen developed for vibration tests as well as for vibration analy-sis with the SO Analyzer Software. VibPilot achieves excellentmeasuring accuracy and an impressive real-time performance byusing state of the art IC technology. The compact and robust devi-ce has a clearly arranged front panel with four or eight BNCsockets for the input signals. For increasing the number of chan-nels, two or more VibPilots can be operated together, at whichthe master clock of the first device takes over the accurate syn-chronisation of all devices. The performance of the single deviceis hereby not affected.

The VibPilot Hardware platform supports the extensive functiona-lity of VibControl software, which includes simple sine or randomtests over complex tests with random signal excitation, that isoverlayed with a multiple sine signal, up to a load simulation intime interval. Of course all tests are accomplished according tothe respective standards ISO, DIN, MIL and IEC.

”Puma” Vibration Control and Analysis System

VibPilot Hardware platform and VibControl Vibration Control Software

Vibration Control Systems

Road simulation

Transient

Sine wave

Random

VR Vibration Control System and Vibration View Software

The computer-aided vibration control system meets all require-ments for an advanced shaker control. It combines a highly-deve-loped and powerful DSP hardware with a personal computer thatis simple to operate. The system covers the entire test range withthe modes of operation random, sine, shock and mixed-modeand offers a simple operation with an outstanding graphic userenvironment. Within the control system the PC carries out the testpreparation, the indication of the test data and the very flexiblereport generation.

FAMILIAR MICROSOFT WINDOWS INTERFACEThe VibrationVIEW controller runs on all varieties of the MicrosoftWindows (R) operating system.

SYSTEM CHECKAll VibrationVIEW software packages include a System Checkmode which provides a manually controllable sine wave outputand oscilloscope and spectrum analysis plots of the accelerome-ter inputs. This test mode is used to calibrate the system and verifyoperation of the controller, amplifier, shaker, and accelerometers.

REMOTE CONTROLA variety of remote monitoring and control options are available.The controller can be monitored or controlled via network andweb with built in web page and e-mail servers.

GRAPHSAll of the VibrationVIEW software packages share a commoneasy-to-use graphing system. Graphs can be easily autoscaled orzoomed. Cursors can be used to locate peaks and highlight par-ticular data points. Data and text annotations can be easily pla-ced on the graphs, with annotations updated live as the datachanges. Graph images and raw graph data can be copied andpasted into your favorite word processor or spreadsheet.

DOCUMENTATIONTest reports can be easily created from customizable report tem-plates. Graphs and raw numerical data can be transferredthrough the Windows clipboard into any word processor orspreadsheet program.

Notes:

Subject to alterations · 6/2010

TIRA Environmental Simulation

Gewerbestraße 19D-08233 TreuenTelefon: +49 (0) 374 68 / 68 08-0Telefax: +49 (0) 374 68 / 68 08-21e-mail: mailinfo@tira-gmbh.deInternet: www.tira-gmbh.de

TIRA Vibration Test Systems

Eisfelder Straße 23/25D-96528 SchalkauTelefon: +49 (0) 367 66 / 280-0Telefax: +49 (0) 367 66 / 280-99e-mail: st@tira-gmbh.deInternet: www.tira-gmbh.de

TIRA VIBRATION TEST SYSTEMS

VIBRATION TEST SYSTEMS Selection Guide - · PDF fileVIBRATION TEST SYSTEMS. 2 Force (N) =...

Documents

Baa! Issue#1

Terrie Schmoldt - University of Wisconsin–Whitewater in a gunny sack, jump to the other hoola hoop and back. Baa Baa Black Sheep Baa Baa Black Sheep have you any wool? Yes sir, yes

learn Arabic alif baa

FY 2016 Governor’s Recommended (BAA) - Home | … BAA...FY 2016 Governor’s Recommended Budget Adjustment (BAA) House Committee on Appropriations December 14, 2015 CONTENTS: 1

OBH82X BaA

BAA Oracle EBS R12.1 iSupplier Portal · BAA Oracle EBS R12.1 iSupplier Portal Page 1 BAA Oracle EBS R12.1 iSupplier Portal BAA Oracle EBS R12.1 iSupplier Portal Oracle iSupplier

HICKORY DICKORY DOCK - School Diva · Hickory Dickory Dock, the mouse ran up the clock. The clock struck one the mouse ran down. Hickory Dickory Dock. BAA BAA BLACK SHEEP Baa baa

BAA Update

3.4.1 - Baa Bapu

ONR BAA # 12-019

Baa Baa Black Sheep - Simple Living. Creative Learning...Baa Baa Black Sheep Baa, baa, black sheep, have you any wool? Yes sir, yes sir, three bags full! One for the master, One for

NURSERY RHYMES · 2020. 11. 11. · 2. Baa, Baa, black sheep Baa, Baa, black sheep Have you any wool? Yes sir, yes sir, three bags full. One for the master, And one for the dame,

Davao Sawmill vs BAA

Board/Authority Authorized (BAA) Courses Requirements … · BAA Subject Areas ... (BAA) Courses Requirements and Procedures Guidebook 1 ... Board/Authority Authorized (BAA) Courses

Two Nursery Rhymes: Rock-a-Bye, Baby and Baa Baa Blacksheep

Baa Baa Black Sheep Group 2 - North Lincolnshire€¦ · Baa Baa Black Sheep Fun things to do! Group 2 Children born in 2019 Little hands will find stimulating pictures and interesting

2013 BAA - Obstetrics

2-Step Broad Agency Announcement (BAA) Number: BAA-12-01 ...crusher.mines.edu/UserFiles/File/finance/researchAdmin/BAA-12-01-PKS.pdfPage 1 of 22 2-Step Broad Agency Announcement (BAA)

OWE Baa · 2016. 9. 21. · OWE Baa ... OWE Baa

Baa Baa Black Sheep BW - Simple Living. Creative Learning€¦ · Baa Baa Black Sheep Baa, baa, black sheep, have you any wool? Yes sir, yes sir, three bags full! One for the master,