View
228
Download
3
Category
Tags:
Preview:
Citation preview
VEX PARTS - MOTION
Robotics – 8
VEX Parts - Motion
2-Wire Motor 269 Add motors to
power more wheels or add an end effector to take your robot to the next level.
VEX Parts - Motion
• The 2 Wire Motor 393 provides 60% more output power than the standard motor, which allows for more powerful mechanisms and drive bases.
• Strong, steel internal gears.
• Can be configured into a "high speed" version.
VEX Parts - Motion
• Gear Kit• This kit contains four sizes of
VEX Spur Gears (12-, 36-, 60-, and 84-tooth gears). The 60- and 84-tooth gears have extra mounting holes.
• Create robot transmissions, gearboxes, and gear reductions.
• Vary the speed or torque of robot motion systems.
• Increase design possibilities for your robots.
VEX Parts - Motion
• Advanced Gear Kit• This kit provides several
options for advanced motion. These parts allow advanced mechanical VEX designers to create new ingenious mechanisms.
• Create Linear Motion with the Rack Gears.
• Transfer Motion 90 degrees with Bevel Gears.
• Add a Differential to your Drivetrain.
• Get a high-reduction with the Worm Gears.
VEX Parts - Motion
Intake Roller
VEX Parts - Motion
• Sprocket & Chain Kit• The six different sprocket
sizes allow for a variety of ratios. Great for any application where you need to transfer power across long distances.
• Transfers power effectively over long distances.
• Designed to carry moderate loads.
• Every section of chain is a master link.
• (14) Sprockets in (5) Sizes.
VEX Parts - Motion
• Tank Tread Kit• Use this tank tread to build
robot tracks which can overcome tough terrain, or build a conveyor belt for scooping up objects.
• Climb over obstacles and traverse tough terrain.
• Drive through sandy or soft spongy surfaces.
• Can be used for a robot conveyor belt.
• Every section is a master link, create treads of any length.
VEX Parts - Motion• 2.75" Omni Directional
Wheel - Double Roller (2-pack)
• Omni-Directional wheels roll forward like normal wheels, but slide sideways with almost no friction (no skidding during turns). Use these wheels to make your robot turn smoothly or build a holonomic drivetrain.
• 2.75" diameter• 14 rollers per wheel
VEX Parts - Motion
• 4" Omni-Directional Wheel (2-pack)
• Omni-Directional wheels roll forward like normal, but slide sideways with almost no friction. Use these wheels to make your robot turn smoothly.
• 4" Omni Wheels roll sideways with very little friction.
• Minimize skidding during turns.
• Build a holonomic drive.
VEX Parts - Motion
• 2.75" Wheel (4-pack)• A pack of (4) of the
VEX 2.75" diameter Wheels. These wheels include a smooth grippy tire which has high traction on smooth surfaces.
• High Traction rounded tread.
• Removing the tread make a low-friction wheel.
VEX Parts - Motion
• 4" Wheel (4-pack)• A pack of (4) of the
VEX 4" diameter wheels. These wheels include a tire which works well on any surface.
• High Traction square tread.
• Removing the tread leaves a ribbed plastic wheel.
VEX Parts - Motion
• 5" Wheel (4-pack)• A pack of (4) of the
VEX 5" diameter Wheels. These wheels include a knobby tire which works great on rough terrain or loose surfaces.
• High Traction rough knobby tread.
• Removing the tread leaves a ribbed plastic wheel.
VEX Parts - Motion
• Mecanum Wheel 4" (4-pack) • Mecanum wheels allow savvy
robot designers to create drivetrains capable of moving in any direction using a standard chassis shape. Simply power each wheel with a different motor and by changing the directions the wheels spin get your robot to move in different directions!
• Allows robots to move in any direction.
• Split Roller style design.• 14 rollers per wheel.
VEX Parts - Motion
• Shaft Coupler (5-pack)• Shaft couplers are the
same length as old VEX clutches, allowing 2-Wire Motors to be used in places that previously had a clutch without changing shaft length.
• Makes replacing 3-Wire Motors quick and simple.
• Placement between motor and drive shaft makes changing shafts easier.
VEX Parts - Motion
Clutch (3-pack) For use with a
VEX Continuous Rotation Motor or VEX Servo.
(3) Clutches (3) Short Axles
for Clutches
VEX Parts - Motion
• Drive Shafts (2-choices)• The square shaft has
rounded corners which allow it to spin easily in a round hole, while locking to a square hole.
• Three length: 2", 3", and 12".
• Use the 12" to make your own custom length shafts.
• Works with motors, wheels, gears, and bearings.
VEX Parts - Motion
• Pillow Block Bearing & Lock Bar Pack
• Bearing Blocks mount on a piece of structure and supports a shaft which is offset either above, below, or to the side of the structure. Lock Bars allow any VEX component to be “locked” to a shaft so that it will spin with the shaft.
• Bearing blocks mount on a piece of structure to support a shaft.
• Lock Bars allow VEX components to be "locked" to a shaft.
VEX Parts - Motion
• Bearing Flat, Delrin (10-pack)
• The Bearing Flat mounts directly on a piece of VEX structure and supports a shaft which runs perpendicular and directly through the structure.
• Low friction allows shafts to turn smoothly.
• Mount with Screws & Nuts or Pop Rivets
VEX Parts - Motion
• Shaft Collar (16-pack)• Collars lock to drive
shafts, keeping wheels and gears from sliding along the shaft. Collars fit around Drive Shafts and can be fastened in place using a setscrew.
• Designed specifically for the VEX Drive Shaft.
• Set screw uses the same Allen Wrench as the 6-32 Motor Screws.
VEX Parts - Motion
• Washers (2-choices)• A washer is a thin disk
with a hole used to distribute the load of a threaded fastener. All VEX washers fit on all VEX screws and VEX shafts.
• Steel washers are a good all-purpose washer.
• Teflon washers are low friction. Use on shafts where metal rubs on metal.
VEX Parts - Motion
• Spacers (3-choices)• A spacer is used to
create a space between two objects, often to properly position them. Available in various lengths.
• Eliminate slop on shafts.
• Add space between metal parts.
• Plastic and Nylon.
VEX Parts - Motion
Claw Kit Easily grab and manipulate
various objects. Motor required and not included.
Strong Enough to hold a 12 oz soda can.
Dexterous Enough to grab a Feather.
Compatible with all VEX Mechanical Parts.
VEX Parts - Motion
• Winch and Pulley Kit• This kit provides the
ability to implement a winch and pulley system and create block and tackle mechanisms to utilize mechanical advantage.
• Lift, lower, hang, drag and more.
• Configurable for many applications.
• Ratchet and Pawl can be engaged to prevent back driving.
VEX Parts - Motion
• Pneumatics Kit 1 - Single Acting Cylinders
• Complete pneumatics add-on for the VEX Robotics system.
• Uses one VEX Controller I/O port per air cylinder
• Reservoir is filled using a standard tie pump fitting
• Single Acting cylinder kit (air push, spring return)
Recommended