Van-Deeo PORTFOLIO for issuu.compressed

dymowatt@hotmail.com 416-906-0579 416-674-1 1 30

DEEOVAN MOWATT

DEEOVAN MOWATT

About Me

I am an International Student from Jamaica currently enrolled in the Industrial Design Degree program at Humber College. My passion for design started through my love for Formula 1 and who so could be so functional yet so beautiful. I believe that great design isn’t just about beauty and form following function but for following emotion, experience and after the product is no longer in use.

Ski lls Exceptional Sketching And Rendering Skills Proficient in the use of Photo-Shop, Sketch-Book-Pro and IllustratorExcellent Visual Model making Skills and Exposure to Clay modeling.

Other Ski lls Include SolidWorks, Alias, Z-Sketch.

Profi le

PROJECTS

KARAKTAR

3-WHEELER

SPEED-FORM

MICHELLIN

CLAY MODELING

BRITISH LIGHT CAR

THESIS PROJECT

��������

The Eco-Flow is catamaran style vessel designed to remove flowing debris from city waterways, canals and rivers. Over 12 mill ion metric tons of plastic debris enters the ocean each year; 40% of which are produced by developing countries. The Phil ippines rank 3rd, producing over 1.9 Mill ion metric tons of aquatic plastic waste each year.

Manila

�������

��� Million metric tons of Aquatic plastic waste per year.

(Photos of examples found online)

Manila

Reducing plastic pollution in developing countries.

Reducing plastic pollution in developing countries.

35°(X2)

���������

When fully extended, the conveyors can swing back and forth up to 35 degrees. The rotataion of the conveyor can be powered either via the motor or manually via pedals.

�������

���������

Conveyors are retractable, enabling better Hydrodynamics. This makes the vessel shorter and more nimble, thus offering better handling dynamics.

������� The front scooper is able to lower itself below waterlevel creating an area of low pressure for surfacewater and debris to run off into.

�� ����

50 ft 3

A Hydraulic press pushes debris towards the back of the container, maximizing its 50 ft3 of storage space.

The pressure for the hydraulics is provided via (2) 40-pound air tanks.

���� ��

A Hydraulic press pushes debris towards the back of the container, maximizing its 50 ft3 of storage space.

The pressure for the hydraulics is provided via (2) 40-pound air tanks.

dymowatt@hotmail.com 416-906-0579 416-674-1 1 30

DEEOVAN MOWATT

KARAKTAR

KARAKTAR

KARAKTAR

The objective for the chair project was to design a chair for a modern l iving environment, which was influenced by Scandinavian Design. The twist was that the chair had to uti l ize no more than 10 fasteners and made from plywood and cord. Some consider-ations for this project were, bending wood, designing the chair be flat packable, use a l ittle material as possible, use as l ittle adhesive as possible.

The Karaktar is a Scandinavian style dining room chair. It is made from 1” thick boltic-burch plywood, Paper cord (twisted paper) and 8 screws. Karaktar is also flat-packable.

KARAKTAR

The objective for the chair project was to design a chair for a modern l iving environment, which was influenced by Scandinavian Design. The twist was that the chair had to uti l ize no more than 10 fasteners and made from plywood and cord. Some considerations for this project were, bending wood, designing the chair be flat packable, use a l ittle material as possible, use as l ittle adhesive as possible. The Karaaktar is a Scandina-vian style dining room chair. It is made from 1” thick boltic-burch plywood, Paper cord (twisted paper) and 8 screws. Karaktar is also flat-packable.

SPEED-FORM

SPEED-FORM

SPEED-FORM

The objective for this project was to design a form that appeared to be fast. The form had to be aerodynamic in nature yet modern and its appearance was to show a clear association with SPEED.

3-WHEELER

SPEED-FORM

The Final Design had convincingly met all the objectives needed in this project; an interesting and dynamic shape that conveys a sense of speed and aero-dynamic efficiency. With sharp edges and gentle flowing l ines it is reminiscent of some of the styl ing we see in many recent high performance sports cars.

3-WHEELER

3-WHEELER

3-WHEELER

The aim of this project was to design a 1+1 comunter vehicle for the year 2020 that utelized 3 wheels and took up 1/4 the space of a Ford F150. This project was heavily focused on ergonomics being that the vehicle’s footprint l imit was so small. Considerations were also made for its power source/ sourses and driving system.

3-WHEELER

3-WHEELER

Much of the insperation behind the design of this vehicle came from organic shapes combind with strong sharp l ines. My aim for the exterior of the vehicle was to creat a form that appeared to sculpted by the air. To achieve this I incorporated very sharp creased lines that flowed gently down the sides and around the car to give it an instincktively aerodynamic yet beautiful form.

DEEOVAN MOWATT

SUPER-CAR

SUPER-CAR

dymowatt@hotmail.com 416-906-0579 416-674-1 1 30

DEEOVAN MOWATT

BRITISH LIGHT CAR

BRITISH LIGHT CAR

!"#$#%&'(#)&$*+"'''''''''*,-./0$''''''''''''''''''''''''''''''1223456'738599'''

!"#$#%&'(#)&$*+"'''''''''*,-./0$''''''''''''''''''''''''''''''1223456'738599'''

CLAY

MICHELINCHALLENGE