View
218
Download
1
Category
Preview:
Citation preview
79Daman Products Company, Inc. • 1811 North Home Street • Mishawaka, IN 46545-7267
Tel: 800.959.7841 574.259.7841 • Fax: 800.241.7664 • Email: sales@daman.com • www.daman.com
Bolt Threads
Metric (ISO 6H) bolt kitM
Adapt D02 valve to D03 manifold
Adapt D05 valve to D03 manifold • style A Adapt D05 valve to D03 manifold • style B
Valve mtg: UNC #10-24 x 0.50 DP or Metric M5-0.8mm ISO 6H x [12.7] DPAdaptor mounting hardware is supplied.See page 98 for itemized list.
Valve mtg: UNC 0.25-20 x 0.50 DP or Metric M6-1.0mm ISO 6H x [12.7] DPAdaptor mounting hardware is supplied.See page 98 for itemized list.
Valve mtg: UNC 0.25-20 x 0.75 DP or Metric M6-1.0mm ISO 6H x [19.1] DPAdaptor mounting hardware is supplied.See page 98 for itemized list.
Valve Adaptors for D03 Manifolds
Omit for inch (UNC) bolt kit.
Port OrientationAv common to AmBv common to BmABAv common to BmBv common to AmS04 valve pattern only.
BA
Valve PatternISO 4401-02-01NFPA T3.5.1-D02 See Tech InformationISO 4401-05-04NFPA T3.5.1-D05 See Tech Information
D02
D05ISO 10372-04-04Daman standard S04See Tech Information
S04
Manifold PatternISO 4401-03-02NFPA T3.5.1-D03See Tech Information
D03
D05-D03 StyleRequired with D05 valve pattern. Omit with D02 or S04 patterns.
Style ALow height, wide design Style BTall height, narrow design
A
B
Product Type Valve AdaptorVA
Adapt S04 valve to D03 manifold • BA orientedValve mtg: UNC 0.31-18 x 0.88 DP or Metric M8 x 1.25mm ISO 6H x [22.2] DPAdaptor mounting hardware is supplied.See page 98 for itemized list.
This adaptor does not orient the A & B ports on the manifold to the respective valve solenoids.
Specifications, descriptions, and dimensional data are subject to correction or change without notice or incurring obligation. Download latest catalog page revisions at www.daman.com.
Ordering InformationMaterial Valve
PatternManifold Pattern Product Type Port
Orientation Style Bolt Threads
Stan
dard
Man
ifold
sC
usto
mPr
oduc
tsC
over
Plat
esVa
lve
Ada
ptor
sSu
bpla
tes
Serv
o Va
lve
Subp
late
sTa
ppin
gPl
ates
DIN
Car
trid
geVa
lve
Bod
ies
Hea
der a
ndJu
nctio
n B
lock
sTe
chni
cal
Info
rmat
ion
Material
D
A
† Working pressure should be considered in accordance with ISO 4413 to determine appro-priate material type.
Ductile Iron - D4512 5000† psi 34.5 MPa
Aluminum - 6061-T6 3000† psi 20.7 MPa
NElectroless Nickel Coated Ductile Iron - D4512 5000† psi 34.5 MPa
80Daman Products Company, Inc. • 1811 North Home Street • Mishawaka, IN 46545-7267
Tel: 800.959.7841 574.259.7841 • Fax: 800.241.7664 • Email: sales@daman.com • www.daman.com
Valve Pattern
Valve Adaptors for D03 Manifolds
Mounting holes sized for Metric (ISO 6H) bolts.M
D03 A & B Port Swap Block • (BA oriented)Adaptor hardware / interface seal kit is supplied. See page 98 for itemized list.
Omit: Mounting holes sized for inch (UNC) bolts.
Port OrientationBv common to AmAv common to BmD03 valve pattern only.
BA
Manifold PatternISO 4401-03-02NFPA T3.5.1-D03 See Tech Information
D03
Bolt ThreadsProduct Type Valve AdaptorVA
Specifications, descriptions, and dimensional data are subject to correction or change without notice or incurring obligation. Download latest catalog page revisions at www.daman.com.
D03ISO 4401-03-02NFPA T3.5.1-D03 See Tech Information
Ordering InformationMaterial Valve Pattern Manifold Pattern Product Type Port Orientation Bolt Threads
Material
D
A
† Working pressure should be considered in accordance with ISO 4413 to determine appro-priate material type.
Ductile Iron - D4512 5000† psi 34.5 MPa
Aluminum - 6061-T6 3000† psi 20.7 MPa
NElectroless Nickel Coated Ductile Iron - D4512 5000† psi 34.5 MPa
Adaptor hardware / interface seal kit is supplied. See page 98 for itemized list.
Adaptor hardware / interface seal kit is supplied. See page 98 for itemized list.
Adaptor hardware / interface seal kit is supplied. See page 98 for itemized list.
80.1Daman Products Company, Inc. • 1811 North Home Street • Mishawaka, IN 46545-7267
Tel: 800.959.7841 574.259.7841 • Fax: 800.241.7664 • Email: sales@daman.com • www.daman.com
Valve Adaptors for D03 Manifolds
Product TypeValve AdaptorVA
Port OrientationAv common to AmBv common to Bm
AB
Rotation90° CCW090
Valve PatternISO 4401-03-02NFPA T3.5.1-D03 See Tech Information
D03
Ordering InformationMaterial Valve Pattern Manifold Pattern Product Type RotationPort Orientation
Manifold PatternISO 4401-03-02NFPA T3.5.1-D03 See Tech Information
D03
180° CCW
270° CCW
180
270
Rotate D03 Valve 90°
Rotate D03 Valve 270°
Rotate D03 Valve 180° Stan
dard
Man
ifold
sC
usto
mPr
oduc
tsC
over
Plat
esVa
lve
Ada
ptor
sSu
bpla
tes
Serv
o Va
lve
Subp
late
sTa
ppin
gPl
ates
DIN
Car
trid
geVa
lve
Bod
ies
Hea
der a
ndJu
nctio
n B
lock
sTe
chni
cal
Info
rmat
ion
Material
D
A
† Working pressure should be considered in accordance with ISO 4413 to determine appro-priate material type.
Ductile Iron - D4512 5000† psi 34.5 MPa
Aluminum - 6061-T6 3000† psi 20.7 MPa
NElectroless Nickel Coated Ductile Iron - D4512 5000† psi 34.5 MPa
81Daman Products Company, Inc. • 1811 North Home Street • Mishawaka, IN 46545-7267
Tel: 800.959.7841 574.259.7841 • Fax: 800.241.7664 • Email: sales@daman.com • www.daman.com
Valve Pattern
Valve Adaptors for D05 Manifolds
Metric (ISO 6H) bolt kitM
Adapt D03 valve to D05 manifold • AB oriented Adapt D03 valve to D05 manifold • BA orientedValve mtg: UNC #10-24 x 0.50 DP or Metric M5-0.8mm ISO 6H x [12.7] DPAdaptor mounting hardware is supplied.See page 98 for itemized list.
Valve mtg: UNC #10-24 x 0.44 DP or Metric M5 x 0.8mm ISO 6H x [11] DPAdaptor mounting hardware is supplied.See page 98 for itemized list.
Omit for inch (UNC) bolt kit.
Port OrientationAv common to AmBv common to BmABBv common to AmAv common to BmD03 valve pattern only.
BA
Manifold PatternISO 4401-05-04NFPA T3.5.1-D05 See Tech Information
D05
This adaptor permits the installation of a D03 valve on a D05 manifold. This adaptor, unlike *D03D05VABA*, properly orients the A & B ports on the manifold to the respective valve solenoids.
This adaptor permits the installation of a D03 valve on a D05 manifold. This adaptor, while low in cost, does not orient the A & B ports on the manifold to the respective valve solenoids.
Bolt ThreadsProduct Type Valve AdaptorVA
Adapt S04 valve to D05 manifold • AB orientedValve mtg: UNC 0.31-18 x 0.63 DP or Metric M8 x 1.25mm ISO 6H x [15.9] DPAdaptor mounting hardware is supplied.See page 98 for itemized list.
This adaptor properly orients the A & B ports on the manifold to the respective valve solenoids.
Specifications, descriptions, and dimensional data are subject to correction or change without notice or incurring obligation. Download latest catalog page revisions at www.daman.com.
D03
S04
ISO 4401-03-02NFPA T3.5.1-D03 See Tech InformationISO 10372-04-04Daman standard S04 See Tech Information
Ordering InformationMaterial Valve Pattern Manifold Pattern Product Type Port Orientation Bolt Threads
Stan
dard
Man
ifold
sC
usto
mPr
oduc
tsC
over
Plat
esVa
lve
Ada
ptor
sSu
bpla
tes
Serv
o Va
lve
Subp
late
sTa
ppin
gPl
ates
DIN
Car
trid
geVa
lve
Bod
ies
Hea
der a
ndJu
nctio
n B
lock
sTe
chni
cal
Info
rmat
ion
Material
D
A
† Working pressure should be considered in accordance with ISO 4413 to determine appro-priate material type.
Ductile Iron - D4512 5000† psi 34.5 MPa
Aluminum - 6061-T6 3000† psi 20.7 MPa
NElectroless Nickel Coated Ductile Iron - D4512 5000† psi 34.5 MPa
87Daman Products Company, Inc. • 1811 North Home Street • Mishawaka, IN 46545-7267
Tel: 800.959.7841 574.259.7841 • Fax: 800.241.7664 • Email: sales@daman.com • www.daman.com
Metric (ISO 6H) bolt kitM
Adapt D03 valve to D08 manifold Adapt D05 valve to D08 manifold
Adapt D05H valve to D08 manifold Adapt D05HE valve to D08 manifold
Valve mtg: UNC #10-24 x 0.50 DP or Metric M5-0.8mm ISO 6H x [12.7] DPAdaptor mounting hardware is supplied.See page 99 for itemized list.
Valve mtg: UNC 0.25-20 x 0.50 DP or Metric M6-1.0mm ISO 6H x [12.7] DPAdaptor mounting hardware is supplied.See page 99 for itemized list.
Valve mtg: UNC 0.25-20 x 0.75 DP or Metric M6-1.0mm ISO 6H x [19.1] DPAdaptor mounting hardware is supplied.See page 99 for itemized list.
Valve mtg: 0.25-20 UNC x 0.50 DP or Metric M6-1.0mm ISO 6H x [12.7] DPAdaptor mounting hardware is supplied.See page 99 for itemized list.
Valve Adaptors for D08 Manifolds
Omit for inch (UNC) bolt kit.
Port OrientationAv common to AmBv common to BmAB
Valve PatternSee Tech Information
ISO 4401-03-02NFPA T3.5.1-D03 ISO 4401-05-04NFPA T3.5.1-D05 (USA std)NFPA T3.5.1-D05 Alt B ISO 4401-05-05NFPA T3.5.1-D05 Alt A
D03
D05
D05H
D05HE
Manifold PatternISO 4401-08-07NFPA T3.5.1-D08See Tech Information
D08
Specifications, descriptions, and dimensional data are subject to correction or change without notice or incurring obligation. Download latest catalog page revisions at www.daman.com.
Bolt ThreadsProduct Type Valve AdaptorVA
Ordering InformationMaterial Valve Pattern Manifold Pattern Product Type Port Orientation Bolt Threads
Stan
dard
Man
ifold
sC
usto
mPr
oduc
tsC
over
Plat
esVa
lve
Ada
ptor
sSu
bpla
tes
Serv
o Va
lve
Subp
late
sTa
ppin
gPl
ates
DIN
Car
trid
geVa
lve
Bod
ies
Hea
der a
ndJu
nctio
n B
lock
sTe
chni
cal
Info
rmat
ion
Material
D
A
† Working pressure should be considered in accordance with ISO 4413 to determine appro-priate material type.
Ductile Iron - D4512 5000† psi 34.5 MPa
Aluminum - 6061-T6 3000† psi 20.7 MPa
NElectroless Nickel Coated Ductile Iron - D4512 5000† psi 34.5 MPa
88Daman Products Company, Inc. • 1811 North Home Street • Mishawaka, IN 46545-7267
Tel: 800.959.7841 574.259.7841 • Fax: 800.241.7664 • Email: sales@daman.com • www.daman.com
Valve Pattern
Metric (ISO 6H) bolt kitM
NFPA T3.5.1-D06 See Tech InformationD06
Adapt D06 valve to D08 manifold Adapt D07 valve to D08 manifoldValve mtg: UNC 0.38-16 x 0.75 DP or Metric M10-1.5mm ISO 6H x [19.1] DPAdaptor mounting hardware is supplied.See page 99 for itemized list.
Valve mtg: UNC 0.38-16 x 0.75 DP or Metric M10-1.5mm ISO 6H x [19.1] DPAdaptor mounting hardware is supplied.See page 99 for itemized list.
Omit for inch (UNC) bolt kit.
Port OrientationAv common to AmBv common to BmAB
Valve Adaptors for D08 Manifolds
ISO 4401-07-06NFPA T3.5.1-D07See Tech Information
D07
Manifold PatternISO 4401-08-07NFPA T3.5.1-D08See Tech Information
D08
Specifications, descriptions, and dimensional data are subject to correction or change without notice or incurring obligation. Download latest catalog page revisions at www.daman.com.
Bolt ThreadsProduct Type Valve AdaptorVA
Ordering InformationMaterial Valve Pattern Manifold Pattern Product Type Port Orientation Bolt Threads
Material
D
A
† Working pressure should be considered in accordance with ISO 4413 to determine appro-priate material type.
Ductile Iron - D4512 5000† psi 34.5 MPa
Aluminum - 6061-T6 3000† psi 20.7 MPa
NElectroless Nickel Coated Ductile Iron - D4512 5000† psi 34.5 MPa
Recommended