View
0
Download
0
Category
Preview:
Citation preview
UVZ-Ferrosplav
Russia, Nizhny Tagil
OOO UVZ-Ferrosplav is a leading manufacturing
enterprises in Russia and the CIS in producing
cored wire, finely-divided ferroalloys,
nodulizers and foundry rich alloys.
About the company
OOO UVZ-Ferrosplav produces high-quality cored wire
for secondary treatment of steels and cast irons, iron and
steel nodulizers, finely-divided ferroalloys, fine powders (0-
0,315mm) for spray coating of welding electrodes and
welding flux cored wire.
Production potential is 36,000 tons per year for
secondary treatment cored wire, 5,000 tons per year for fine
powders, 3,000 tons per year for nodulizers. Our production
is supplied to all metallurgical enterprises of Russia.
Our customers
EVRAZ Group
MMK Group
NLMK Group
Metalloinvest Holding
OMK Holding
TMK Group
Severstal Group
Mechel Group
and many other steel works of Russia and the CIS
Sales geography
Technical aspect
UVZ-Ferrosplav's structure:
Center for science and innovation
Cored wire department
Foundry department
Granulating and bricketing units
Production facility:
4 blocks for cored wire production
3 units of granulating (double-roll
crusher, 2 vibroscreens, desintegrator,
attritor)
Foundry department (electric arc
furnace, scrap stockyard, gas purification)
chemical analysis laboratory
Technical aspect
Scientific aspect
Our Center for science and
innovation is fully staffed
with highly skilled experts.
Scientific aspect
The continuous improvement of production technology
and the development of new materials allowed to form the
main technological areas of our activities:
improvement of steel quality used in transport
engineering, shipbuilding, welding and etc.;
output that provides refining, desulphurization,
modification and microalloying in production of steel and
cast iron.
The main activities of the Center
for sceince and innovation
Development and implementation of the iron-carbon
melts' modification technology that provides the output of
metal with the required level of consumer properties;
Improving the quality and effectiveness of nodulizers;
Development and implementation of a new generation of
nodulizers – multi-elements, mixed, flux-metall, etc.,
providing the output of steel with improved consumer
properties.
Relevant scientific objections:
Differentiation of composition and application
technology of nodulizers for steel and cast iron for various
purposes.
Microatomization of steels and cast iron structures as a
result of modifying processing.
Increase in the purity of metal for gases and nonmetallic
inclusions by optimizing the composition of nodulizers.
Creating nodulizers of prolonged action.
Technological development
Together with South Ural State University we implement the
program "Improving the quality and performance properties of steel
for different purposes by enhancement the technology of modifying
iron-carbon melts with the use of nodulizing materials of new
generation" The purpose of the work:
development of technology for smelting, ensuring output of steel with
improved performance characteristics;
optimization of the structural condition and homogeneity increase for
different purposes;
increasing purity (for gases and nonmetallic inclusions) and
microatomization of the metal structure;
optimizing the composition of complex brand-new nodulizers;
introduction of new technologies and materials for smelting at steel
works.
Technological development
getting convincing experimental results that reveal the effect
mechanism of various nodulizing materials on the structure and
properties of steel consumption.
complex (using the most modern methods) study of the metal's fine
structure, using various nodulizing material and technologies for their
application.
experimental metal smelting in laboratory with the use of various
nodulizers and technologies.
evaluation of gas content, composition and morphology of nonmetallic
inclusions and dispersed particles, the size and nature of the grain
structure in the laboratory and pilot industrial metals.
evaluation of experimental steel's mechanical properties obtained by
using different nodulizers.
Production areas are based in Chelyabinsk on the territory of
ZAO Ferrosplav, established in 1993.
Production
Since 2006 the
Quality
management
system is implied
for the successful
performance in
compliance with
the requirements
of standard GOST
R ISO 9001-2001
(certified by TUF
ISO 9001:2008).
Participation in exhibitions
Since 2006 every year we take part in the Annual
International exclusive exhibition Metal-Expo. The
quality of our production is proved by medals and
diplomas received on this exhibition.
Contacts
Senior management: Albert Iskhakov, Sergei Malko
Chief officer of the Center for science and innovation:
Paschenko Sergei
Senior research scientist of the Center for science and
innovation: Radchenko Yury
Tel/fax: +7 (351) 237-39-29, 237-63-33, 261-88-78, 261-86-80.
Web: www.ferrosplav-chel.ru
E-mail: fs@ferrosplav-chel.ru, uvzferrosplav@gmail.com
Recommended