View
268
Download
6
Category
Preview:
Citation preview
User's Manual
HYPACKMAX HYPACK, Inc. 56 Bradley St.
Middletown, CT 06457
Phone (860) 635-1500 Technical Support: help@hypack.com Fax: (860) 635-1522 Web Address: www.hypack.com
Registration Page The following information is required in order to register your HYPACK® MAX with HYPACK®, Inc. Registering your package enables us to send you software upgrades and to report bugs that have been found in the programs. Please fill in the following information and fax it to HYPACK®, Inc at (860) 635-1522 or email the same information to Accounting@hypack.com. Package: Hypack® Max
Hypack® Max Lite Hypack® Max Survey Hypack® Max Office Dredgepack®
Platform: Windows 2000 Windows XP
License Holder: Company Name: Billing Address: Phone: Fax: Email: Date Purchased: Purchased From: Key Number: FOR SHIPPING OF FUTURE UPDATES: The Maintenance Plan entitles you to all program updates during that period. Whereas the billing address is often different than where the product is actually being used, please provide instructions below as to where new release CDs should be sent. Contact Person: Address: Phone:
HYPACK® MAX Manual 1/05 • i
Contents
1. INTRODUCTION .................................... 1-1
I. Welcome to HYPACK® MAX............................................................................................ 1-1 II. HYPACK® MAX Minimum System Requirements .................................................... 1-2 III. Network System Requirements ...................................................................................... 1-3 IV. Installation........................................................................................................................ 1-4 V. HYPACK® MAX Interface ................................................................................................ 1-4
A. HYPACK® MAX Files List.............................................................................................. 1-6 B. HYPACK® MAX Screen Control Bar.............................................................................. 1-7 C. HYPACK® MAX Area Map Settings............................................................................... 1-7 D. Language Selection.......................................................................................................... 1-20
VI. Projects in HYPACK® MAX ....................................................................................... 1-20 A. Managing Projects ........................................................................................................... 1-21 B. Loading and Unloading Files to your Project .................................................................. 1-27
VII. HYPACK® MAX Data Files ........................................................................................ 1-28 A. Raw Data Files................................................................................................................. 1-28 B. Edited Data Files.............................................................................................................. 1-28 C. Sorted Data Files.............................................................................................................. 1-29 D. Catalog Files (*.LOG) ..................................................................................................... 1-29
VIII. HYPACK® MAX Project Files ................................................................................ 1-32 A. Advanced Channel Design Files (*.CHN)....................................................................... 1-32 B. Background Files ............................................................................................................. 1-32 C. Border files (*.BRD)........................................................................................................ 1-37 D. Channel Plan Files (*.PLN) ............................................................................................. 1-38 E. Kinematic Tidal Datum Files (*.KTD)............................................................................ 1-38 F. Matrix Files (*.MTX ) ..................................................................................................... 1-38 G. Planned Line Files (*.LNW)............................................................................................ 1-39 H. Plotting Sheet Files (*.PLT) ............................................................................................ 1-39 I. Sound Velocity Files (*.VEL) ......................................................................................... 1-39 J. Target Files (*.TGT)........................................................................................................ 1-40 K. Template Files (*.TPL or *.TMP) ................................................................................... 1-40 L. Tide Files (*.TID) ............................................................................................................ 1-40
IX. Preparing for your Survey ............................................................................................ 1-41 A. Channel Design................................................................................................................ 1-41 B. Editor Programs ............................................................................................................... 1-41 C. Geodetic Parameters Program.......................................................................................... 1-42 D. Hardware Programs ......................................................................................................... 1-42 E. Transducer Offsets ........................................................................................................... 1-42 F. Calibration Programs ....................................................................................................... 1-42 G. Scheme Builder................................................................................................................ 1-43
ii HYPACK® MAX Manual 1/05
X. Collecting your Data .......................................................................................................... 1-43 XI. Processing your Data ..................................................................................................... 1-44
A. Single Beam Max............................................................................................................. 1-44 B. Multibeam Max................................................................................................................ 1-44 C. Sounding Selection .......................................................................................................... 1-44 D. Tide Corrections............................................................................................................... 1-45 E. Sound Velocity Corrections............................................................................................. 1-45 F. Hyscan.............................................................................................................................. 1-45
XII. Creating your Final Reports ......................................................................................... 1-46 A. Cross Sections & Volumes .............................................................................................. 1-46 B. Exporting to Other Formats ............................................................................................. 1-46 C. Plotting Survey Data ........................................................................................................ 1-46 D. TIN Model ....................................................................................................................... 1-46
XIII. Utility Programs......................................................................................................... 1-46 A. Advanced Channel Design............................................................................................... 1-46 B. Digitizing Programs ......................................................................................................... 1-46 C. File Work Programs......................................................................................................... 1-47 D. Geodesy Programs ........................................................................................................... 1-47 E. ADCP Processing Programs ............................................................................................ 1-47 F. Other Utility Programs..................................................................................................... 1-48
XIV. External Programs..................................................................................................... 1-48
2. PREPARATION........................................ 2-1
I. Loading Background Files (Charts) to the Project........................................................... 2-1 A. Loading ARCS Charts to HYPACK® MAX .................................................................... 2-1 B. Loading VPF Charts to the Project .................................................................................... 2-5 C. Loading C-Maps to the Project .......................................................................................... 2-6 D. Displaying SHP Charts .................................................................................................... 2-11
II. Geodesy ........................................................................................................................... 2-12 A. Geodetic Parameters Program.......................................................................................... 2-12 B. Geodesy Utility Programs................................................................................................ 2-25
III. Planned Survey Lines .................................................................................................... 2-38 A. Spacing Planned Lines..................................................................................................... 2-40 B. Offset Patterns for Planned Lines .................................................................................... 2-40 C. Creating Planned Lines in the Line Editor....................................................................... 2-41 D. Creating Curved Lines with the Line Editor.................................................................... 2-55 E. Importing *.LIN and *.N83 Files to the Line Editor ....................................................... 2-56 F. Clipping Planned Lines to the Survey Area..................................................................... 2-57 G. Creating Planned Lines in Channel Design Max............................................................. 2-61 H. Creating a Planned Line File from a DXF File................................................................ 2-76
IV. Hardware Setup in HYPACK....................................................................................... 2-78 A. Specifying Devices in HYPACK Hardware .................................................................... 2-80 B. Device Setup in HYPACK Hardware.............................................................................. 2-80 C. Driver Setup in HYPACK Hardware............................................................................... 2-83
HYPACK® MAX Manual 1/05 • iii
D. Record Basis in HYPACK Hardware .............................................................................. 2-84 E. Connection Information in HYPACK Hardware............................................................. 2-85 F. Measuring Offsets in HYPACK Hardware...................................................................... 2-90 G. Station Information in HYPACK Hardware.................................................................... 2-94 H. Script Button in HYPACK Hardware.............................................................................. 2-96 I. Disabling Devices in the HYPACK Hardware Setup...................................................... 2-96 J. Saving your Hardware Setup in HYPACK Hardware..................................................... 2-96 K. Editing Device Settings in HYPACK Hardware ............................................................. 2-97
V. Hardware Notes ................................................................................................................. 2-97 A. GPS Positioning Equipment ............................................................................................ 2-97 B. Echosounders ................................................................................................................. 2-110 C. Helmsman Displays and Event Taps ............................................................................. 2-115 D. Parallel Event Boxes ...................................................................................................... 2-121 E. Motion Sensors .............................................................................................................. 2-123 F. Telemetry Tide Gauges.................................................................................................. 2-124 G. Gyros.............................................................................................................................. 2-125 H. Towfish/ROV’s/Multiple Vessels.................................................................................. 2-126 I. Example of a Typical HYPACK Hardware Setup......................................................... 2-136 J. HYSWEEP® Hardware Setup in HYPACK ................................................................. 2-141
VI. Calibrating your System.............................................................................................. 2-141 A. Latency Test................................................................................................................... 2-141 B. Correcting Latency Time in the Hardware Program...................................................... 2-144 C. Correcting Latency Errors to Survey Data..................................................................... 2-144
VII. Target Files (*.TGT).................................................................................................... 2-146 A. Creating a New Target File............................................................................................ 2-146 B. Editing an Existing Target File ...................................................................................... 2-147 C. Inserting a Target ........................................................................................................... 2-147 D. Deleting a Target............................................................................................................ 2-148 E. Appending Target Files.................................................................................................. 2-148
VIII. Plotting Sheets (*.PLT)............................................................................................ 2-148 A. Creating a Plotting File in the Plotting Sheet Editor...................................................... 2-148 B. Positioning the Plotting Sheet File with the Cursor in the Plotting Sheet Editor .......... 2-149 C. Positioning the Plotting File in the Plotting Sheet Editor in the Plotting Sheet Editor . 2-149 D. Example of Creating a Plotting Sheet in the Plotting Sheet Editor ............................... 2-150 E. Editing an Existing Plotting Sheet File in the Plotting Sheet Editor ............................. 2-151
IX. Matrix Files (*MTX).................................................................................................... 2-151 A. Creating a Matrix File with the Matrix Editor ............................................................... 2-152 B. Positioning the Matrix File with the Cursor .................................................................. 2-153 C. Positioning the Matrix File in the Matrix Editor ........................................................... 2-153 D. Example of Creating a Matrix File ................................................................................ 2-153 E. Creating a Filled Matrix File in the XYZ to Matrix Program........................................ 2-154 F. Editing an Existing Matrix File...................................................................................... 2-156 G. Matrix File View Options in Hypack Max .................................................................... 2-156
iv HYPACK® MAX Manual 1/05
3. SURVEY .................................................... 3-1
I. Overview ............................................................................................................................... 3-1 II. Survey Preparation.......................................................................................................... 3-1 III. Starting the Survey Program.......................................................................................... 3-2 IV. Navigation Parameters .................................................................................................... 3-3 V. Project Information ............................................................................................................. 3-5 VI. Raw Survey Files.............................................................................................................. 3-6
A. Survey File Naming Convention ....................................................................................... 3-6 B. Data Directories for Raw Survey Files .............................................................................. 3-7 C. Catalog Files for Raw Survey Files ................................................................................... 3-7
VII. Scheme Builder................................................................................................................. 3-7 A. Creating Display Schemes for Survey ............................................................................... 3-8 B. Color Settings in Scheme Builder...................................................................................... 3-9 C. Matrix Sounding Colors in Scheme Builder .................................................................... 3-10 D. Text Settings in Scheme Builder...................................................................................... 3-11 E. C-Map and S-57 Chart Settings in Scheme Builder ........................................................ 3-11 F. Windows Settings in Scheme Builder.............................................................................. 3-12
VIII. Windows in Survey .................................................................................................... 3-12 A. Area Map in Survey......................................................................................................... 3-13 B. Left-Right Indicator in Survey......................................................................................... 3-16 C. Data Display Window in Survey ..................................................................................... 3-17 D. Profile Window in Survey ............................................................................................... 3-19 E. Device Windows in Survey ............................................................................................. 3-23 F. Alarms in Survey ............................................................................................................. 3-23 G. Helmsman Display in Survey .......................................................................................... 3-24 H. Broadcasting Survey Windows over the Network to the Window Viewer ..................... 3-24
IX. Boat Features in Survey ................................................................................................ 3-26 A. Boat Track Parameters ..................................................................................................... 3-27 B. Boat Shapes and Symbols................................................................................................ 3-27 C. Labeling your Vessels in Survey ..................................................................................... 3-28 D. Specifying the Main Vessel in Survey............................................................................. 3-29 E. Displaying Boat Profile Windows ................................................................................... 3-29 F. Anchors in Survey............................................................................................................ 3-29
X. Chart (Background) Files.................................................................................................. 3-30 A. Chart Types Supported in Survey.................................................................................... 3-31 B. Loading Charts During Survey ........................................................................................ 3-31 C. Unloading Charts During Survey..................................................................................... 3-32
XI. Targets in Survey ........................................................................................................... 3-32 A. Marking Targets in Survey .............................................................................................. 3-33 B. Selecting Targets in Survey ............................................................................................. 3-34 C. Erasing and Restoring Targets in Survey......................................................................... 3-34 D. Target Properties in Survey ............................................................................................. 3-34
HYPACK® MAX Manual 1/05 • v
E. Target Display Defaults in Survey................................................................................... 3-36 F. Loading a Manually Prepared Target File in Survey....................................................... 3-37 G. Water's Edge Targets ....................................................................................................... 3-38 H. Connecting Targets with Survey Lines............................................................................ 3-39 I. Connecting Targets to the Boat Position in Survey......................................................... 3-39
XII. Matrix Files in Survey ................................................................................................... 3-39 A. Loading and Unloading Matrix Files in Survey .............................................................. 3-40 B. Multiple Matrix Files in Survey....................................................................................... 3-40 C. Saving Soundings to a Matrix in Survey ......................................................................... 3-40 D. Matrix Color Settings in Survey ...................................................................................... 3-44 E. Saving Matrix Files in Survey ......................................................................................... 3-45
XIII. Tide Corrections in Survey ....................................................................................... 3-45 A. Telemetry Tide Gauges in Survey ................................................................................... 3-46 B. Manual Entry of Tide Corrections in Survey................................................................... 3-46 C. Predicted Tide Corrections in Survey.............................................................................. 3-47 D. RTK GPS Tide Corrections in Survey............................................................................. 3-47
XIV. Draft/Squat Corrections............................................................................................ 3-47 A. Manual Draft/Squat Corrections ...................................................................................... 3-48 B. Automatic Draft/Squat Corrections ................................................................................. 3-48
XV. Shared Memory Programs............................................................................................ 3-49 A. Memory Viewer ............................................................................................................... 3-49 B. Shared Memory Output Program..................................................................................... 3-50 C. Echosounder Display ....................................................................................................... 3-54 D. NMEA Output.................................................................................................................. 3-55 E. Odometer.......................................................................................................................... 3-56 F. Graphical Motion Reference Unit.................................................................................... 3-57 G. Heading and Speed Indicator ........................................................................................... 3-57
XVI. Logging Data in Survey ............................................................................................. 3-58 A. Navigating Planned Lines in Survey................................................................................ 3-58 B. Logging Events in Survey................................................................................................ 3-62
XVII. Plotting in Survey....................................................................................................... 3-63 XVIII. Printing Survey Data ................................................................................................. 3-65
4. SINGLE BEAM PROCESSING ............. 4-1
I. Previewing Your Soundings in the Main Window............................................................ 4-1 II. Compress Project ............................................................................................................. 4-2 III. Single Beam Post-processing Sequence Guides............................................................. 4-3 IV. Sound Velocity Corrections Program ............................................................................ 4-4
A. Creating a Sound Velocity File.......................................................................................... 4-4 B. Importing Sound Velocity Data ......................................................................................... 4-5
V. Single Beam Max.................................................................................................................. 4-7 A. Single Beam Max Procedure ............................................................................................. 4-7 B. Selecting Sounding Files in Single Beam Max.................................................................. 4-9
vi HYPACK® MAX Manual 1/05
C. Corrections in Single Beam Max..................................................................................... 4-10 D. Merging Corrections in Single Beam Max ...................................................................... 4-13 E. Read Parameters in Single Beam Max............................................................................. 4-14 F. Merging Digitized Depth Data with Raw Survey Data in Single Beam Max ................. 4-20 G. Windows in Single Beam Max ........................................................................................ 4-21 H. Display Settings in Single Beam Max ............................................................................. 4-27 I. Search and Filter Options in Single Beam Max............................................................... 4-30 J. Single Beam Max Statistics ............................................................................................. 4-31 K. Editing Data in Single Beam Max ................................................................................... 4-32 L. Saving Edited Single Beam Data..................................................................................... 4-35 M. Exporting Edited Single Beam Data to a Text File...................................................... 4-35
VI. Clipping Survey Files..................................................................................................... 4-36 VII. Sounding Selection Programs for Single Beam Surveys ............................................ 4-37
A. Comparison of Sounding Selection Methods for Single Beam Data............................... 4-37 B. Sort Program .................................................................................................................... 4-38 C. Cross Sort Program .......................................................................................................... 4-40 D. Mapper Program .............................................................................................................. 4-42
5. SIDE SCAN ............................................... 5-1
I. Side Scan Hardware ............................................................................................................ 5-1 A. Specifying Devices in Side Scan Hardware....................................................................... 5-1 B. Driver Setup in Side Scan Hardware ................................................................................. 5-2 C. Connection Information in Side Scan Hardware ............................................................... 5-2 D. Offsets in Side Scan Hardware .......................................................................................... 5-5 E. Editing Device Settings in Side Scan Hardware................................................................ 5-6
II. Side Scan Survey .............................................................................................................. 5-6 A. Side Scan Survey Windows............................................................................................... 5-7 B. View Options in Side Scan Survey.................................................................................. 5-11 C. Logging Data in Side Scan Survey .................................................................................. 5-15 D. Side Scan Playback .......................................................................................................... 5-18
III. Side Scan Processing...................................................................................................... 5-19 A. Running Hyscan............................................................................................................... 5-20 B. Loading Data to Hyscan................................................................................................... 5-21 C. Scan View ........................................................................................................................ 5-22 D. Creating Geo-referenced TIF Files in Mosaic View........................................................ 5-30
6. FINAL PRODUCTS ................................. 6-1
I. Hyplot Max........................................................................................................................... 6-1 A. Running Hyplot Max ......................................................................................................... 6-1 B. Setting Display Options in Hyplot Max............................................................................. 6-2 C. Plotting Methods in Hyplot Max ..................................................................................... 6-20 D. Exporting your Plotting Sheet to DXF Format ................................................................ 6-20
II. Cross Sections and Volumes ......................................................................................... 6-24 A. Running Cross Sections and Volumes............................................................................. 6-24
HYPACK® MAX Manual 1/05 • vii
B. Surveys Tab in Cross Sections and Volumes .................................................................. 6-24 C. Graph Options Tab in Cross Sections and Volumes........................................................ 6-31 D. View Tab in Cross Sections and Volumes....................................................................... 6-36 E. Print Tab in Cross Sections and Volumes........................................................................ 6-37 F. Volumes Tab in Cross Sections and Volumes................................................................. 6-38 G. Cross Section-based Volumes Calculation Methods ....................................................... 6-39 H. Examples in Cross Sections and Volumes....................................................................... 6-53 I. Computing Reach Volumes Using the Channel Plan Feature ......................................... 6-63
III. Surface Modeling in the TIN Model Program ............................................................ 6-67 A. Creating a TIN Model ...................................................................................................... 6-67 B. Initial Data Dialog in TIN Modeling ............................................................................... 6-68 C. TIN Model Display Settings ............................................................................................ 6-71 D. Measuring Distance and Position in 2D TIN Models...................................................... 6-78 E. Cutting Sections through a TIN Model............................................................................ 6-78 F. Example of Cutting Sections through a TIN Model ........................................................ 6-79 G. Clipping your TIN Model using a Border File ................................................................ 6-82 H. Break Lines in TIN Models ............................................................................................. 6-84 I. Exporting Data from TIN Models.................................................................................... 6-85 J. Volumes Based on Surface Calculations ......................................................................... 6-94 K. Examples of Volumes Based on Surface Calculations .................................................... 6-99
IV. Export............................................................................................................................ 6-104 A. Running the Export Program ......................................................................................... 6-105 B. Export Options in Export ............................................................................................... 6-107 C. Example: Exporting to DGN/DXF in EXPORT............................................................ 6-115
7. UTILITIES ................................................ 7-1
I. Tide (Water Level) Corrections.......................................................................................... 7-1 A. Harmonic Tidal Predictions ............................................................................................... 7-2 B. Tide Corrections from High-Low Water Times and Heights ............................................ 7-5 C. Tide Corrections with Manual Observations ..................................................................... 7-6 D. Importing NOAA Tide Data to Manual Tides Program .................................................... 7-8 E. Editing Tide Files in the Manual Tides Program............................................................... 7-9 F. Real Time Kinematic (RTK) Tide Corrections ................................................................. 7-9
II. Boat Shape Editor .......................................................................................................... 7-17 A. Creating a Boat Shape...................................................................................................... 7-18 B. Importing your Boat Shape.............................................................................................. 7-19
III. 3D Shape Editor ............................................................................................................. 7-19 A. 3D Shape Editor Interface................................................................................................ 7-20 B. Adjusting the View in 3D Shape Editor .......................................................................... 7-21 C. Running the 3D Shape Editor .......................................................................................... 7-23 D. Opening Custom Shape Files in the 3D Shape Editor ..................................................... 7-24 E. Animating Dredge Template Files in the 3D Shape Editor ............................................. 7-26 F. Creating Basic Objects in the 3D Shape Editor ............................................................... 7-26 G. Creating Advanced Objects in the 3D Shape Editor........................................................ 7-26 H. Creating Vessel Origin and Attachment Points ............................................................... 7-30
viii HYPACK® MAX Manual 1/05
I. Removing Objects from the Custom Shape..................................................................... 7-31 J. Setting Object Properties in the 3D Shape Editor............................................................ 7-31 K. Replicating Objects in your Custom Shape ..................................................................... 7-41 L. Grouping Objects in your Custom Shape ........................................................................ 7-41 M. Saving your Custom 3D Shape File............................................................................. 7-44
IV. Advanced Channel Design ............................................................................................ 7-46 A. Running Advanced Channel Design................................................................................ 7-46 B. Creating (or Editing) your Channel File in Advanced Channel Design .......................... 7-46 C. Importing Channel Template Information to Advanced Channel Design ....................... 7-51 D. Viewing your Channel in Advanced Channel Design ..................................................... 7-54 E. Exporting Channel files in XYZ Format ......................................................................... 7-55 F. Examples in Advanced Channel Design.......................................................................... 7-56
V. Chart Program................................................................................................................... 7-60 A. Running the Chart Program ............................................................................................. 7-61 B. Registering your Chart ..................................................................................................... 7-61 C. Digitizing your Chart Features......................................................................................... 7-61 D. Editing Chart Features in the Chart Program................................................................... 7-64
VI. Echogram Program ....................................................................................................... 7-64 VII. Shore Manual ................................................................................................................. 7-65
A. Creating a *.DIG File in Shore Manual ........................................................................... 7-66 B. Editing your Object List in Shore Manual ....................................................................... 7-66 C. Printing your Object List ................................................................................................. 7-67
VIII. DGW Editor ............................................................................................................... 7-67 IX. XYZ Collector ................................................................................................................ 7-68 X. Sounding Adjustment ........................................................................................................ 7-69 XI. Data Adjustments Program .......................................................................................... 7-70
A. Running Data Adjustments .............................................................................................. 7-70 B. Data Adjustment Items .................................................................................................... 7-71
XII. Manual Entry Program................................................................................................. 7-72 XIII. Metadata ..................................................................................................................... 7-73
A. Creating Metadata............................................................................................................ 7-74 B. Navigation through Metadata projects/files..................................................................... 7-75 C. Metadata Symbols............................................................................................................ 7-75 D. Entering Data in your Metadata Report ........................................................................... 7-76 E. Building the *.MET file and Saving the *.GEN file........................................................ 7-78 F. Saving a Metadata project................................................................................................ 7-78
XIV. Metric File Converter Program................................................................................ 7-79 XV. Remap ............................................................................................................................. 7-79 XVI. Pathfinder Program................................................................................................... 7-82 XVII. Merge XYZ................................................................................................................. 7-83 XVIII. ADCP Logger ............................................................................................................. 7-84
A. ADCP LOGGER Procedure ............................................................................................ 7-85
HYPACK® MAX Manual 1/05 • ix
B. Connecting your ADCP Device....................................................................................... 7-86 C. Testing the ADCP Connection......................................................................................... 7-86 D. Opening the Plan File in the ADCP Logger .................................................................... 7-87 E. Deploying the Plan file in ADCP LOGGER ................................................................... 7-87 F. Logging ADCP Data........................................................................................................ 7-88 G. Windows in ADCP LOGGER ......................................................................................... 7-88 H. ADCP LOGGER View Options ...................................................................................... 7-96
XIX. ADCP Profile.............................................................................................................. 7-99 A. ADCP Profile Procedure.................................................................................................. 7-99 B. Surveys Tab in the ADCP Profile Program ................................................................... 7-100 C. Graph Options Tab in the ADCP Profile Program ........................................................ 7-100 D. View Tab in the ADCP Profile Program ....................................................................... 7-103 E. Print tab in the ADCP Profile program.......................................................................... 7-106 F. Discharge Report Tab in the ADCP Profile Program.................................................... 7-108
XX. ADCP to DXF............................................................................................................... 7-109 XXI. Hardlock Test ........................................................................................................... 7-111
A. Running the Hardlock Test ............................................................................................ 7-111 B. Hardlock Problem Solving............................................................................................. 7-112
XXII. Seabed Statistics ....................................................................................................... 7-113 A. Creating a Seabed Square in Seabed Statistics .............................................................. 7-114 B. Creating Seabed Statistics.............................................................................................. 7-117 C. Reassigning Seabed Identification Values..................................................................... 7-119 D. Exporting Seabed Data to a Text File ............................................................................ 7-120 E. Converting Seabed Identification Colors to Project Colors........................................... 7-121
XXIII. Cross Check Statistics.............................................................................................. 7-122 A. Running the Statistics Program...................................................................................... 7-122 B. Calculating Cross Check Statistics ................................................................................ 7-122 C. View and Print the 3-D View in the Statistics Program ................................................ 7-123 D. Viewing and Printing the Cross Check Statistics Report............................................... 7-124 E. Example in Cross Check Statistics ................................................................................ 7-125
XXIV. Channel Condition Reporter .................................................................................. 7-126 A. Channel Condition Reporter Interface ........................................................................... 7-126 B. Running Channel Condition Reporter Program............................................................. 7-127
XXV. 3D Terrain Viewer ................................................................................................... 7-137 A. Running the 3DTV Program.......................................................................................... 7-138 B. Terrain Settings in 3DTV............................................................................................... 7-140 C. 3D Terrain Viewer Flight Modes................................................................................... 7-143 D. Display Options in the 3D Terrain Viewer .................................................................... 7-145 E. Positioning your Camera in the 3D Terrain Viewer ...................................................... 7-159 F. Saving your Views in the 3D Terrain Viewer ............................................................... 7-168 G. Optimizing 3D Terrain View Performance.................................................................... 7-170
8. DREDGEPACK® ..................................... 8-1
I. Overview ............................................................................................................................... 8-1
x HYPACK® MAX Manual 1/05
II. Running DREDGEPACK® ............................................................................................ 8-1 III. Windows in Dredgepack®............................................................................................... 8-2
A. Area Map Window in DREDGEPACK®.......................................................................... 8-2 B. Data Display Window in DREDGEPACK®..................................................................... 8-3 C. Left-Right Indicator in DREDGEPACK® ........................................................................ 8-3 D. Boat Profile Window in DREDGEPACK® ...................................................................... 8-3 E. Device Windows in DREDGEPACK®............................................................................. 8-9 F. Alarms in DREDGEPACK®............................................................................................. 8-9
IV. Matrix Files in DREDGEPACK®.................................................................................. 8-9 A. Entering Survey Data into a Matrix File.......................................................................... 8-10 B. Loading and Unloading a Matrix Files in DREDGEPACK® ......................................... 8-13 C. Multiple Matrix Files in DREDGEPACK® .................................................................... 8-13 D. Saving Dredge Depths to the Matrix in DREDGEPACK® ............................................ 8-13 E. Editing Matrix Depths in DREDGEPACK® .................................................................. 8-15 F. Matrix Color Settings in DREDGEPACK®.................................................................... 8-16 G. Saving Matrix Files in DREDGEPACK®....................................................................... 8-17
V. Bucket Patterns in DREDGEPACK® ............................................................................. 8-18 A. Displaying Bucket Patterns in DREDGEPACK®........................................................... 8-18 B. Displaying Bucket Patterns in HYPACK® MAX........................................................... 8-20
VI. Volume Estimates in DREDGEPACK®...................................................................... 8-21
9. APPENDIX................................................ 9-1
I. HYPACK® Data Types....................................................................................................... 9-1 A. HYPACK® Project File Types.......................................................................................... 9-1 B. HYPACK® Data File Types ............................................................................................. 9-4
II. Hardlock Types and their Programs.............................................................................. 9-5 III. Keyboard Commands...................................................................................................... 9-6
A. Survey Keyboard Commands ............................................................................................ 9-6 B. 3DTV Keyboard Commands ............................................................................................. 9-7 C. 3D Shape Editor Keyboard Commands............................................................................. 9-8
IV. Hardware Interfacing.................................................................................................... 9-10 A. Serial Interfacing.............................................................................................................. 9-10 B. Binary Coded Decimal (BCD) Devices ........................................................................... 9-13 C. GPIB Interfaces................................................................................................................ 9-13
V. Drivers and their Devices .................................................................................................. 9-14 A. Device Drivers ................................................................................................................. 9-14 B. Devices Supported by HYPACK® Hardware ................................................................. 9-15 C. Devices Supported by Side Scan Survey......................................................................... 9-24
VI. Geodesy ........................................................................................................................... 9-24 A. Ellipsoids.......................................................................................................................... 9-24 B. Geoids .............................................................................................................................. 9-26 C. Datums ............................................................................................................................. 9-26 D. Datum Transformations ................................................................................................... 9-26
HYPACK® MAX Manual 1/05 • xi
E. Projections........................................................................................................................ 9-28 VII. Basic Acoustics for the Hydrographer......................................................................... 9-32
A. Sound Velocity and Ray Bending.................................................................................... 9-32 B. Beam Frequency Effects on Survey Data ........................................................................ 9-35 C. Beam Geometry ............................................................................................................... 9-35 D. Timing and Latency ......................................................................................................... 9-37
VIII. Echosounders 101....................................................................................................... 9-39 A. How Echosounders Work ................................................................................................ 9-39 B. Echosounder Calibration.................................................................................................. 9-41 C. Beam Patterns .................................................................................................................. 9-42
IX. Launching External Programs from the HYPACK® MAX Menu........................... 9-43
HYPACK® MAX Manual 3/03 • i
Index1PPS pulse
cabling diagram, 2-102 settings, 2-100, 2-106
3D Shape Editor. See Also 3D shapes camera controls, 7-23 grouping
names, 7-43 object hierarchy first, 7-43 objects first, 7-42
keyboard commands, 9-8 overview, 7-19 procedure, 7-23 settings
advanced objects, 7-26, 7-27, 7-29 attachment points, 7-30 basic objects, 7-26 colors, 7-22, 7-35, 7-38 default color, 7-35 display options, 7-21 dredge arms, 7-30 faces, 7-38 groups, 7-41–7-44, 7-41–7-44 mining lamp, 7-22 model types, 7-21 names, 7-40, 7-43 object properties, 7-31–7-41, 7-40, 7-43 rotation, 7-33 shading, 7-22 textures, 7-36, 7-38 translation, 7-32 transparency, 7-38 vessel origin, 7-30 visibility, 7-37 windows, 7-38
windows design panes, 7-21 face editing window, 7-38 main, 7-20 object browser, 7-21 object modeling window, 7-26, 7-27, 7-29 object properties, 7-21, 7-40
3D shapes animating, 7-26 creating
3D Shape Editor, 7-23 advanced objects, 7-26, 7-29 basic objects, 7-26 dredge arms, 7-30 groups, 7-44 spuds, 7-30 vessel origin, 7-30
editing 3D Shape Editor, 7-25, 7-31, 7-32, 7-34, 7-38, 7-41
advanced objects, 7-29 faces, 7-29, 7-38 groups, 7-41, 7-44 name, 7-40 object properties, 7-31–7-41, 7-40 removing objects, 7-31 rotation, 7-33 translation, 7-32 visibility, 7-37
exporting, 7-45 grouping, 7-41–7-44 grouping objects, 7-44 importing
3D Shape Editor, 7-25 3D Terrain Viewer, 7-153
loading 3D Shape Editor, 7-25 3D Terrain Viewer, 7-153
object properties colors, 7-35 default color, 7-35 rotation, 7-33, 7-41 scale, 7-41 textures, 7-36 translation, 7-32, 7-41 visibility, 7-37
saving, 7-44 local computer, 7-45 network locations, 7-45 VES files, 7-45
scaling 3D Terrain Viewer, 7-155
translating, 7-32, 7-33 3D Terrain Viewer
3DTV mode, 7-138 camera controls, 7-159–7-161
camera control tool bar, 7-161 camera position window, 7-159 camera set position dialog, 7-160 default position, 7-160 heading, 7-164 horizontal positioning, 7-162 keyboard commands, 7-161 motion, 7-161 speed and direction, 7-164, 7-167 tilt, 7-166 vertical positioning, 7-163 vessel settings dialog, 7-161 yaw, 7-165 zoom, 7-167
flight modes circle, 7-145 LNW file, 7-144
ii HYPACK® MAX Manual 1/05
manual, 7-143 survey, 7-144
Matrix 3DTV, 7-137, 7-138 movies
AVI, 7-169 recording, 7-168, 7-169 replaying, 7-169 saving, 7-169
overview, 7-137 procedure, 7-138 screen captures, 7-168 settings
AVI, 7-169 boat shapes, 7-153 buffering, 7-171 camera controls. See 3D Terrain Viewer:camera controls camera position, 7-158, 7-162 channel templates, 7-151 colors, 7-146, 7-149, 7-152 data set, 7-138 dredging equipment, 7-156 dynamic lighting, 7-147 flight modes, 7-139, 7-143 frame rate, 7-171 GUI response, 7-170 model type, 7-145 survey lines, 7-151 targets, 7-158 terrain settings, 7-140 vertical scale, 7-148 water surface, 7-149
windows camera position window, 7-158, 7-159 lighting position window, 7-148 size and position, 7-139
3D TIN models. See TIN models:3D TIN 3D view channel template, 7-54 3D view cross check statistics graph, 7-124 3DM files
3D Terrain Viewer, 7-139, 7-169 definition, 9-1
3DTV. See 3D Terrain Viewer 3DV files
3D Terrain Viewer, 7-139, 7-146 definition, 9-1
3OD files 3D Shape Editor, 7-44 converting, 7-45 definition, 9-1 exporting, 7-45 saving, 7-44, 7-45
acoustics theory bar check, 9-34 beams
beam angles, 9-43 beam frequency, 9-35 beam geometry, 9-35 beam patterns, 9-42 ray bending, 9-32, 9-33 reflection, 9-33 refraction. See acoustics theory:beams:ray bending
overview, 9-32
multibeam, 9-33–9-35 single beam, 9-32–9-33
Snell's Law, 9-33 sound velocity
changes, 9-33, 9-34 corrections, 9-35 profile, 9-35
ADCP files ADCP Logger, 7-84 ADCP Profile, 7-99 ADCP to DXF, 7-109 converting
ADCP to DXF, 7-109 displaying
ADCP Logger, 7-85, 7-86 ADCP Profile, 7-103
loading ADCP Profile, 7-99 ADCP to DXF, 7-110
logging, 7-88 saving, 7-84, 7-88
ADCP Logger break test, 7-86 overview, 1-43, 7-84 plan file, 7-87 procedure, 7-85 settings, 7-88
connection, 7-86 data display window, 7-97 heading, 7-98 modes, 7-85 output format, 7-98 plan file, 7-87 tabular view, 7-97 units, 7-96 velocity profile windows, 7-97 velocity reference, 7-96
windows ADCP Logger, 7-88 data display, 7-95 Hypack information, 7-95 intensity profile, 7-92 magnitude direction profile, 7-93 tabular view, 7-89 transect vector, 7-93 velocity profiles, 7-90
ADCP Profile color settings, 7-103, 7-104 exporting DXF files, 7-107 Object Editor, 7-104 overview, 1-47, 7-99 procedure, 7-99 reports
cross sections graphs, 7-106 discharge reports, 7-106, 7-108
settings color settings, 7-103 cross section graph, 7-103 object files, 7-105 print options, 7-106, 7-108 survey data, 7-102 survey lines, 7-104
HYPACK® MAX Manual 3/03 • iii
view options, 7-103 ADCP to DXF
overview, 1-48, 7-109 procedure, 7-109 settings, 7-110
Advanced Channel Design checking faces, 7-46 example
adding toes, 7-56 LNW to CHN, 7-58
inverting depths, 7-47 overview, 1-46, 7-46 procedure, 7-46
creating a CHN file from an LNW file, 7-51, 7-53 entering face data, 7-48 entering node data, 7-46 splitting faces, 7-50
settings faces, 7-48 LNW to CHN, 7-51 nodes, 7-46 view options, 7-54
warnings nonconvex shape error, 7-50 non-flat face error, 7-50 orientation error, 7-50
advanced read parameters Single Beam Max. See Single Beam Max:settings:advanced
read paramters alarms
ADCP Logger, 7-89 Dredgepack
cross track error, 8-9 device alarm, 8-9 HDOP, 8-9 minimum depth, 8-9 no kinematic, 8-9 non-differential, 8-9
Side Scan Survey, 5-7 Survey, 3-12
cross track error, 3-4, 3-17, 3-23 device alarm, 3-23 HDOP, 2-108, 3-23 minimum depth, 3-4, 3-23 no kinematic, 3-23 non-differential, 2-140, 3-23 number of satellites, 2-108
alignment devices with boat, 2-92 multibeam acoustics effects, 9-36 TIN models with survey lines, 6-70
all format definition, 9-4
all format-edited, 1-28, See Also survey files-edited, data files
ADCP Profile, 7-100 Cross Sections and Volumes, 6-25 Cross Sort, 4-37 Export, 6-104 Manual Entry program, 1-47, 7-72 Mapper, 4-37 Merge XYZ, 7-83
Metric File Converter, 7-79 Remap, 7-79 Seabed Statistics, 7-114 Single Beam Max, 4-9 Sort program, 4-37, 4-38 Sounding Adjustment program, 7-70 TIN Model program, 6-67, 6-70, 6-78, 6-89, 6-94
all format-sorted, 1-29, See Also survey files-sorted, data files
Cross Sections and Volumes, 6-25 Cross Sort, 4-38, 4-41, 4-42 Hypack Max, 4-1 Metric File Converter, 7-79 Seabed Statistics, 7-114 TIN Model program, 6-67, 6-70, 6-78, 6-89
amplitude profile displaying
Hyscan, 5-24, 5-28 Side Scan Survey, 5-9
Analog Side Scan overview, 5-3 settings, 5-3
anchors Boat Shape Editor, 7-18 dropping, 3-30 on boat shapes, 3-29, 7-18 raising, 3-30
annotation ADCP Profile, 7-106 Cross Sections and Volumes, 6-33 Hardware device setup, 2-83, 2-114, 2-122
ARCS charts ARCS PIN, 2-2 ARCS User Permit, 2-2 base charts, 2-3 chart updates, 2-1, 2-3, 2-4 georeferencing, 2-4 loading, 2-1
hard drive, 2-3 Hypack Max, 2-4
navigator permits, 2-3 permit numbers, 2-3 permits, 2-2 skipper permits, 2-3
ARCS Manager overview, 2-3 procedures
loading ARCS charts, 2-1 loading ARCS permits, 2-3 loading charts to your hard drive, 2-3 loading charts to your project, 2-4
settings ARCS permit numbers, 2-3 geodesy, 2-4
area map Hypack Max
Border Editor, 2-57, 2-58, 2-59 Line Editor, 2-43, 2-45, 2-46, 2-47, 2-60 Plotting Sheet Editor, 2-149 Target Editor, 2-147
Survey, 2-116, 3-12, 3-13, 3-31 display settings, 3-10, 3-15
iv HYPACK® MAX Manual 1/05
helmsman display, 3-24 orientation, 3-14
authorization-C-Maps, 2-6 automatic leg switching, 3-5, 3-62 autosearch
Single Beam Max, 4-32 AVI files
3D Terrain Viewer, 7-139, 7-169 azimuths
back azimuth, 2-35 geodetic, 2-25, 2-34, 2-35 geodetic azimuth
Channel Condition Reporter, 7-127 grid azimuth, 1-20
Hypack Max, 1-7 range-azimuth positioning, 2-94 reference azimuth, 2-94, 2-95 Single Beam Max, 4-22, 4-33
background files. See charts backup
catalog files, 3-61 bar check, 2-114
Bar Check program, 1-42 theory, 9-41
base surveys annotation, 6-37, 7-106 loading, 6-25, 6-54 overlaying files, 6-25 template information, 6-26
Beam Angle Test overview, 1-44
bearing measurements Side Scan Survey, 5-8, 5-9 Single Beam Max, 4-22, 4-33 Survey, 3-18, 3-34 TIN Model program, 6-78
block editing Seabed Statistics, 7-119 Single Beam Max, 4-22, 4-24, 4-33
BMP files 3D Terrain Viewer, 7-168 Dredgepack, 8-8 Hyplot Max, 6-12, 6-13, 6-15 Hyscan, 5-29, 5-30 Title Block Editor, 6-13, 6-15
Boat Shape Editor anchors, 3-29, 7-18 overview, 1-41, 7-17 procedure, 7-18
boat shapes 3D Terrain Viewer
display options, 7-154 importing, 7-153
assigning symbols or shapes, 2-131 color settings, 2-132, 2-133 creating
3D Shape Editor, 7-19, 7-23, 7-24, 7-45 Boat Shape Editor, 7-17, 7-18 Dredgepack, 8-8
custom shapes 3D Shape Editor, 7-20 3D Terrain Viewer, 7-153
Boat Shape Editor, 7-17 Dredgepack, 8-8
displaying 3D Shape Editor, 7-21 3D Terrain Viewer, 7-153, 7-154 Boat Shape Editor, 7-18 Dredgepack, 8-6 Side Scan Survey, 5-11 Survey, 3-24–3-29
Dredgepack positions, 8-2, 8-6 tracklines, 8-2
editing visibility, 7-37
follow boat Side Scan Survey, 5-11 Survey, 3-14
importing, 7-19 3D Terrain Viewer, 7-153 Dredgepack, 8-8
labeling, 2-133 loading
Boat Shape Editor, 7-18 object properties
visibility, 7-37 orientation, 2-81, 2-92, 2-94, 2-105, 2-125 outline colors, 2-132 saving
3D Shape Editor, 7-45 Boat Shape Editor, 7-19
scaling 3D Shape Editor, 7-37 3D Terrain Viewer, 7-155
Side Scan Survey display options, 5-11 positions, 5-18
Survey anchors, 3-29 assigning symbols and shapes, 3-27 color settings, 3-28 custom shapes, 3-28 display options, 3-24–3-29 follow boat, 3-14 importing, 3-27 labeling, 3-28 main vessel, 3-29, 3-30 outline colors, 3-28 positions, 3-13, 3-16–3-17, 3-23, 3-27, 3-35 range radius, 3-27 speed, 3-27 symbol colors, 3-28 symbols, 3-27 track parameters, 3-27 tracklines, 3-27 vectors, 3-27
symbol colors, 2-132, 2-133 Border Editor. See Also border files
example clipping survey lines, 2-59
overview, 1-41, 2-57 procedure, 2-57
border files. See Also BRD files, Border Editor
HYPACK® MAX Manual 3/03 • v
clipping survey lines, 2-57 creating
cursor method, 2-57 spreadsheet method, 2-58 Survey, 3-42
displaying, 2-58, 2-59, See Also project files:enabling Survey, 3-42
editing, 2-58, 2-59 editing survey data, 3-42 limiting volumes calculations, 6-35 loading
Survey, 3-42 overview, 1-37 previewing, 2-58, 2-59 saving, 2-59
Border Editor, 2-58 Border Editor, 2-59 Survey, 3-43
bottom classification exporting
Seabed Statistics, 7-120 bottom classifications
defining, 7-114, 7-116 box templates
Cross Sections and Volumes, 6-28, 6-49, 6-50 TIN Model program, 6-95
BRD files Border Editor, 2-59 Cross Sections and Volumes, 6-35 definition, 9-1 Hypack Max, 4-36 Line Editor, 2-57 Survey, 3-42 TIN Model, 6-82
BSB charts, 1-33, See Also charts:BSB charts bucket patterns
displaying Dredgepack, 8-2, 8-18 Hypack Max, 8-20
modes, 8-18 view options
Dredgepack, 8-18 Hypack Max, 8-20
cablecount. See Also: towfish, device drivers:cablecnt.dll, device drivers:towcable.dll
assigning mobiles, 2-129 cable out, 2-131 device setup, 2-127, 2-128 driver setup, 2-128, 2-130
calibration echosounders, 7-10
bar check, 2-114 Bar Check, 9-34 Latency Test, 2-141–2-144
GPS Latency Test, 2-142, 2-141–2-144
calibration tests bar check, 1-42, 2-114, 9-34 Latency Test, 1-42, 2-141–2-144 Patch Test, 1-42
camera controls 3D Shape Editor
3D camera control, 7-23 zoom and pan, 7-23
3D Terrain Viewer, 7-159–7-161 camera control tool bar, 7-161 camera position window, 7-159, 7-161 camera set position dialog, 7-160 default position, 7-160 heading, 7-164 horizontal positioning, 7-162 keyboard commands, 7-161 motion, 7-161 speed, 7-167 tilt, 7-166 vertical positioning, 7-163 yaw, 7-165 zoom, 7-167
catalog files. See Also LOG files backup, 3-61 creating, 1-29 definition, 9-2 editing, 1-31 merging All Format files, 1-30 naming, 3-7 overview, 1-29 saving, 1-29 show lines report, 1-31
centerline reference, 6-43 centerlines
creating Channel Design Max, 2-62, 2-63 Line Editor, 2-41
Cross Sections and Volumes, 6-32, 6-34, 6-36, 6-43, 6-63, 6-64
displaying 3D Terrain Viewer, 7-151 ADCP Profile, 7-104
DXF export to LNW, 2-76, 2-77 importing
Channel Design Max, 2-64 labeling
ADCP Profile, 7-101 loading
Channel Condition Reporter, 7-128, 7-129 Cross Sections and Volumes, 6-27 Dredgepack, 3-20, 8-3 Single Beam Max, 4-13
settings 3D Terrain Viewer, 7-152 Channel Design Max, 2-63
chainage Channel Design Max, 2-62, 2-63
Channel Condition Reporter color settings, 7-131, 7-134 controlling depths, 7-136 exporting XYZ files, 7-135 overview, 1-48, 7-126 procedure, 7-127
creating a channel, 7-128 creating reaches, 7-131 determining shoals, 7-135
reports creating, 7-136
vi HYPACK® MAX Manual 1/05
displaying, 7-135, 7-136 editing, 7-136 printing, 7-136
settings channel limits, 7-129 channel properties, 7-130, 7-135 channel types, 7-129 colors, 7-131 DGN layer display, 7-128 project depth, 7-131, 7-136 saving, 7-133 sounding display, 7-134 turning basins, 7-130
channel condition reports creating, 7-136 displaying, 7-135 editing, 7-136 printing, 7-136
Channel Design overview, 1-41
Channel Design Max overview, 2-61 procedure, 2-62 settings
channels, 2-63, 2-65, 2-69 curved channel lines, 2-69 offset toes, 2-65 side slopes, 2-65, 2-68 survey lines, 2-69 toe shifts, 2-65 top of bank, 2-68 turning basins, 2-66
channel plan. See Also channel templates calculating volumes, 6-64 creating, 6-64 overview, 6-63 procedure, 6-63
channel plan files. See PLN files, Channel Design, channel templates, survey lines
channel properties-Channel Condition Reporter, 7-130 channel templates. See Also box templates, Template
Editor, cross sections, PLN files centerlines
3D Terrain Viewer, 7-152 ADCP Profile, 7-104 Channel Design Max, 2-61, 2-63 Cross Sections and Volumes, 6-34, 6-36, 6-40, 6-43
chainage Channel Design Max, 2-63
creating Advanced Channel Design, 7-51, 7-53 Channel Design, 2-38 Channel Design Max, 2-61, 2-62 Cross Sections and Volumes, 6-27 Line Editor, 2-50
displaying 3D Terrain Viewer, 7-151 ADCP Profile, 7-99, 7-103, 7-104 Advanced Channel Design, 7-54 Channel Design Max, 2-73 Cross Sections and Volumes, 6-24, 6-34, 6-36 Line Editor, 2-50
Survey, 3-19–3-21, 3-19–3-21 TIN Model, 6-72
editing Advanced Channel Design, 7-52 Channel Design Max, 2-63, 2-64, 2-65 Line Editor, 2-50
loading 3D Terrain Viewer, 7-151 Advanced Channel Design, 7-46 Channel Design Max, 2-63 Cross Sections and Volumes, 6-27 Line Editor, 2-50
overview, 1-40, 6-26, 6-39 saving
Advanced Channel Design, 7-46, 7-51, 7-52 Channel Design Max, 2-63, 2-75 Cross Sections and Volumes, 6-28 Line Editor, 2-50
settings 3D Terrain Viewer, 7-151 Advanced Channel Design, 7-52 Cross Sections and Volumes, 6-34, 6-49 Line Editor, 2-50
side slopes Channel Design Max, 2-63
simplifying Advanced Channel Design, 7-52 Cross Sections and Volumes, 6-34
toe lines 3D Terrain Viewer, 7-152 Channel Condition Reporter, 7-129 Channel Design Max, 2-63
toe points Channel Design Max, 2-63, 2-67 Cross Sections and Volumes, 6-34
turning basins 3D Terrain Viewer, 7-152 Channel Design Max, 2-61, 2-63, 2-66
channel type-Channel Condition Report, 7-129 chart datum
3D Terrain Viewer, 7-150, 7-153 chart features
Chart program, 7-61 procedure
editing, 7-65 DGW Editor, 7-68
control point, 7-68 digitizing
Chart program, 7-61 DGW Editor, 7-67 Echogram program, 7-65 Shore Manual, 7-66
editing Chart program, 7-65
printing-Shore Manual program, 7-67 Shore Manual, 7-67
Chart program overview, 1-46, 7-60 procedure, 7-61
digitizing features, 7-61 registering a chart, 7-61
charts
HYPACK® MAX Manual 3/03 • vii
ARCS charts Hypack Max, 2-1 Survey, 3-31
BSB charts Hypack Max, 1-33 Survey, 3-31
C-Maps. See Also C-Maps, See Also C-Maps Hypack Max, 1-17 Survey, 3-31
DGN files, 1-34, See Also DGN files Boat Shape Editor, 7-19 Channel Condition Reporter, 7-128 Export, 6-107, 6-113 Hypack Max, 1-18 Survey, 3-31
DGW files, 1-34, See Also DGW files Boat Shape Editor, 7-18 Chart program, 7-61, 7-65 DGW Editor, 7-67 Survey, 3-31
DIG files Shore Manual program, 7-66 Survey, 3-31
digitizing DGW Editor, 7-67 Echogram, 7-65 Shore Manual, 7-66
displaying. See Also project files:loading Channel Condition Reporter, 7-128 Dredgepack, 8-2 Hypack Max, 1-32, 2-1, 2-146, 2-148, 2-152 Survey, 1-32, 3-2, 3-12, 3-13–3-15, 3-24, 3-30, 3-32
draw order, 3-31, 3-32 DXF files, 1-35, See Also DXF files
ADCP Profile, 7-107 Channel Condition Reporter, 7-128 Export, 6-107, 6-113 Hypack Max, 1-18 Survey, 3-31 TIN Model program, 6-85
geodetic parameters, 3-32 loading
Channel Condition Reporter, 7-128, 7-133 Hypack Max, 1-27, 2-1, 2-146, 2-148, 2-152 Hyplot Max, 6-1, 6-2 Survey, 3-2, 3-30, 3-31, 3-32
registering Chart program, 7-61 Echogram program, 7-65
S-57 charts Hypack Max, 1-17, 1-36 Survey, 3-31
TIF files Hypack Max, 1-37 Hyscan, 5-20 Survey, 3-31
types, 3-30 unloading, 3-32
Hypack Max, 1-28 Hyplot Max, 6-2
VPF (Vector Product Format) Hypack Max, 2-5
VPF (Vector Product Format) files Survey, 3-31, 3-32
check lines Cross Sort program, 4-40, 4-41
CHN files 3D Terrain Viewer, 7-151 Advanced Channel Design, 1-32, 7-46 Channel Design Max, 2-62 definition, 9-1 Dredgepack, 8-3 Survey, 3-20
C-Maps authorization, 2-6 day/night colors, 3-11 information query, 1-7 loading, 2-1–2-11 overview, 1-33 scales, 2-9 scanning the CD, 2-7 subscription list, 2-6 zones, 2-6
COB files. See Also Object files, See Also Object files ADCP Profile, 7-105 Cross Sections and Volumes, 6-30 definition, 9-1
color settings 3D Shape Editor, 7-22, 7-24, 7-35, 7-38
faces, 7-38 3D Terrain Viewer, 7-149
channel lines, 7-152 channel templates, 7-152 depths, 7-146 survey lines, 7-152 vessel, 7-154
ADCP Profile, 7-103, 7-104 Channel Condition Reporter, 7-131, 7-134 Cross Sections and Volumes, 6-30, 6-36 Dredgepack, 8-5, 8-16, 8-19 Export program
depths, 6-110 Hypack Max, 7-121
day/night colors, 1-11 depths, 1-8, 1-13 grid display, 1-12
Hyplot Max color bar, 6-17 depths, 6-4 matrix, 6-9 north arrow, 6-17 Seabed ID, 6-8
Hyscan, 5-24 Hysweep Survey, 5-12 Mapper, 4-45 Plotting Sheet Editor, 2-148 Scheme Builder, 3-7
chart elements, 3-9 matrix files, 3-10 survey elements, 3-9 window elements, 3-12
Seabed Statistics, 7-113, 7-116 modifying, 7-114
Seabed Statistics:, 7-114
viii HYPACK® MAX Manual 1/05
Side Scan Survey, 5-12 Single Beam Max, 4-21 Survey, 3-10, 7-121, See Also color settings:Scheme
Builder boat outlines, 2-132 boat symbols, 2-132, 2-133 boats, 2-132, 3-28 data display window, 3-17, 3-18, 3-19 depths, 3-44 matrix files, 3-44 schemes, 3-7
TIN Model program, 6-73, 6-87 COM ports. See Hardware program:settings:serial
connections COM Test, 5-4 Compress Project
overview, 1-25, 4-2 procedure, 1-25, 4-2
computer, 1-3, See hardware:PC system requirements conical projections, 9-31 connect dialog
ADCP device, 7-86 parallel event boxes, 2-123 serial helmsman display, 2-121
Content Standards for Digital Geospatial Metadata, 7-74 contour dredging, 6-43 contour TIN models, 6-75 contours
Cross Sections and Volumes contour dredging, 6-43
Hyplot Max color settings, 6-5
TIN Model attributes, 6-85, 6-87 color settings, 6-73, 6-85, 6-87 exporting, 6-85 labeling, 6-87 labels, 6-87 smoothing, 6-85, 6-86
control panel Hypack Max, 1-10 Hyplot Max, 6-2 Hyscan, 5-24
controlling depths, 7-136 CORPSCON. See geodetic parameters:Use Corpscon course made good, 2-81, 2-100, 2-105, 2-125, 3-27 cross check statistics. See statistics:cross check
graph, 7-123 cross lines
Statistics program, 7-122 cross section sessions
creating. See Cross Sections and Volumes:procedure saving. See Cross Sections and Volumes:settings:saving
cross sections (channel). See Also channel templates, box templates, Template Editor, PLN files
creating Channel Design, 2-38 Channel Design Max, 2-61, 2-62 Cross Sections and Volumes, 6-27 Line Editor, 2-50
displaying ADCP Profile, 7-99, 7-103, 7-104
Cross Sections and Volumes, 6-24, 6-34, 6-36 Line Editor, 2-50 Survey, 3-12, 3-19–3-21, 3-22
printing, 6-37, 7-106 segments, 6-43
cross sections (data) creating
TIN Model program, 6-67, 6-78 displaying, 8-3
ADCP Profile, 7-99, 7-103, 7-104 Cross Sections and Volumes, 6-24, 6-36 Single Beam Max, 4-21 Survey, 3-12, 3-19–3-21, 3-22
printing ADCP Profile, 7-106 Cross Sections and Volumes, 6-37
Cross Sections and Volumes color settings
pen properties, 6-30 examples
calculation method comparison, 6-58 changing templates, 6-56 channel plan, 6-64 session setup, 6-53
exporting DXF files, 6-37 Object Editor, 6-29 overview, 1-46, 6-24 procedure, 6-24 reports
cross sections graphs, 6-37 gap report, 6-34 top of bank report, 6-34 volumes, 6-38
settings box templates, 6-51 channel plan. See Also channel templates channel templates, 6-27, 6-34 color settings, 6-30, 6-36 cross section graph, 6-36 print options, 6-37 saving, 6-24 survey data, 6-24, 6-25 templates, 6-34 view options, 6-36
Template Editor, 6-27 volumes calculations
end area 1 method, 6-44 end area 2 method, 6-45 end area 3 method, 6-46 method comparison, 6-40 Philadelphia methods, 6-49 reach volumes, 6-63 Savannah method, 6-47 standard Hypack method, 6-43
warnings average end area and nonparallel survey lines, 6-42
Cross Sort program, 4-37 overview, 1-45, 4-40 procedure, 4-41
cross track error, 8-9, See Also distance off line Dredgepack, 8-3 Hardware, 2-137
HYPACK® MAX Manual 3/03 • ix
multiple vessels, 2-133, 3-29 parallel helmsman display, 2-119 Survey, 3-4, 3-12, 3-16, 3-17, 3-20, 3-23 USB helmsman display, 2-119
CSS files. See Cross Sections and Volumes:settings Cross Sections and Volumes program, 6-24 definition, 9-1
cut profile window. See Dredgepack:windows:cut profile window
damping, 3-27 Data Adjustments program
correcting offset errors, 2-145, 2-146 overview, 1-47, 2-145, 7-71 procedure, 2-145, 7-71
data display window color settings, 2-132–2-133, 3-19 fonts, 3-19 item order, 3-18 item selection, 3-18, 3-46 multiple vessels, 2-132, 3-18, 3-19 Survey, 3-12, 3-17
data file properties, 6-31 data files
compressing, 1-25 disabling
Export, 6-105 Hypack Max, 4-1 Hyplot Max, 6-2
displaying. See data files:enabling drawing. See data files:enabling, loading enabling
Export, 6-105 Hypack Max, 1-28, 4-1 Hyplot Max, 6-2
geodesy conversion, 2-36 loading, 1-27 unloading, 1-28, 4-1
data logger Side Scan Survey, 5-15, 5-16
datum transformation parameters 3-parameter, 2-14, 2-27 7-parameter, 2-15, 2-27 calculating, 9-26
3-parameter, 2-26, 2-27, 2-29, 2-32, 9-27 7-parameter, 2-27, 2-29, 2-32, 9-27 CORPSCON function, 2-16 exact formulae, 9-28 multiple regression formulas, 2-18 NIMA function, 2-17 numerical difference, 9-28 regression formulae, 9-27
no transformation, 2-14 specifying, 2-14 testing, 2-26 usage, 2-98
Datum Transformation program, 1-47 overview, 2-25, 2-26 printing screen, 2-27 procedure
3-parameter calculations, 2-26 testing 3- and 7-parameter transforms, 2-26
datum transformations
procedure CORPSCON feature, 2-16 multiple regression formulas, 2-18 NIMA feature, 2-17
datums definition, 9-26 separation of chart datum and reference ellipsoid, 7-13
day/night colors, 1-11, 3-11 DBL (Distance from Beginning of Line)
ADCP Profile, 7-104, 7-106 Cross Sections and Volumes, 6-33, 6-35, 6-36, 6-37 Export, 6-115 Manual Entry program, 7-73 Single Beam Max, 4-12
DCT files definition, 9-1 Sounding Adjustments program, 7-70
DEP files definition, 9-1 Echogram program, 7-65 Single Beam Max, 4-20
depth mode ADCP Profile, 7-102 Cross Sections and Volumes, 6-33 Dredgepack, 8-14 Single Beam Max, 4-10, 4-11 Survey, 3-41 TIN Model program, 6-72
depths. See Also survey files-raw, survey files-edited, survey files-sorted
calculating position, 9-37 camera controls
3DTV, 7-162, 7-163 color settings
3D Terrain Viewer, 7-146 ADCP Profile, 7-104 Dredgepack, 8-5 Export, 6-110, 6-111 Hypack Max, 1-8 Hyplot Max, 6-4 Scheme Builder, 3-10 Survey, 3-44
corrected, 1-44, 3-45, 4-7, 4-10 correcting. See Also sound velocity corrections, tide
corrections, draft/squat corrections, survey files-raw:editing, survey files-edited:editing
Data Adjustments program, 7-72 Single Beam Max, 4-13
design grade, 6-28, 6-43, 6-50 digitizing
Chart program, 7-64 Echogram program, 7-66 XYZ Collector, 7-69
displaying, 8-3 3D Terrain Viewer, 7-146 ADCP Profile, 7-99, 7-102, 7-103 ADCP to DXF, 7-110 Channel Condition Reporter, 7-133 Chart program, 7-64 Cross Sections and Volumes, 6-24, 6-33, 6-36 Dredgepack, 8-6, 8-13, 8-9–8-17 Hypack Max, 1-13, 5-33, 7-70
x HYPACK® MAX Manual 1/05
Hyplot Max, 6-1, 6-2, 6-7 Hyscan, 5-22 Memory Viewer, 3-49 Side Scan Survey, 5-7–5-9 Single Beam Max, 1-44, 4-9, 4-21, 4-22, 4-23, 4-27, 4-28,
4-29 Survey, 3-10, 3-18, 3-35, 3-49 TIN Model program, 6-67, 6-71 XYZ Collector, 7-70
exporting Export, 6-109, 6-115 Hyplot Max, 6-22 Seabed Statistics, 7-120 Single Beam Max, 4-35 TIN Model program, 6-89
filtering Dredgepack, 8-14 Single Beam Max, 4-8, 4-16–4-17 Survey, 3-41
inverting Advanced Channel Design, 7-47 Channel Condition Reporter, 7-135 Export, 6-115 Hyplot Max, 6-9 Line Editor, 2-52 Merge XYZ, 7-84 Single Beam Max, 4-30 Template Editor, 2-52 TIN Model program, 6-69, 6-72
labeling ADCP Profile, 7-101 ADCP to DXF, 7-110 Cross Sections and Volumes, 6-32 Hypack Max, 1-13 Hyplot Max, 6-7, 6-22
loading 3D Terrain Viewer, 7-138 Cross Sections and Volumes, 6-25 Dredgepack, 8-13 Hypack Max, 7-70 Hyplot Max, 6-1 TIN Model, 6-68
Manual Entry, 7-73 overdredge limit, 6-26, 6-43 plotting
Hyplot Max, 6-7 Survey, 3-65
presorting Single Beam Max, 4-17
project grade, 6-28, 6-43, 6-50 rounding options
Hypack Max, 1-14 Hyplot Max, 6-9
saving. See survey files-raw:saving, survey files-edited:saving, survey files-sorted:saving, digitizing programs
subgrade. See depths:overdredge limit supergrade, 6-26, 6-43 unit conversion
Metric File Converter, 7-79 design grade, 6-28, 6-43, 6-50 device drivers
cablecnt.dll, 2-127, 2-131 assigning mobiles, 2-129 cable out, 2-131 device setup, 2-127, 2-128 driver setup, 2-128, 2-130 warning, 2-129
echotrac.dll, 2-115 HPGL.dll, 3-63 inn448.dll, 2-114 kinematic.dll, 2-99, 2-106, 7-9 lcd3.dll, 2-118 lcd4.dll, 2-120 listing
Hypack Hardware, 9-15 Side Scan Hardware, 5-1, 9-24
lpt_tap.dll, 2-122 NetNMEA.dll, 3-55 NMEA.dll, 2-125 OTFgyro.dll, 2-125 overview, 9-14 seabedID.dll, 7-113, 7-121 selecting, 2-79–2-80 settings. See Hardware program:settings sminput.dll, 3-53 tidefile.dll, 3-47 towcable.dll, 2-127, 2-131
assigning mobiles, 2-129 cable out, 2-131 device setup, 2-127 driver setup, 2-128, 2-130 warning, 2-129
trackp.dll, 2-134 trackpo.dll, 2-134 trkplxt.dll, 2-135 wintab32.dll. See digitizer drivers
device settings. See Also Hardware program:settings, hardware:selecting devices, Hardware program:selecting devices
displaying Multibeam Max, 2-146 Single Beam Max, 2-146 Single Beam Max, 4-15
editing Hardware, 2-97 Multibeam Max, 2-146 Side Scan Hardware, 5-6 Single Beam Max, 2-146, 4-15
device setup dialog, 2-79, 2-80 GPS, 2-105 parallel event box, 2-122 parallel helmsman, 2-118 serial helmsman, 2-120 towfish, 2-127
device windows Dredgepack, 8-9 Survey, 3-12, 3-23
DGN files. See Also charts:DGN files definition, 9-2 Export, 6-113 loading
Boat Shape Editor, 7-19 Channel Condition Reporter, 7-128, 7-133
HYPACK® MAX Manual 3/03 • xi
overview, 1-34 DGN origin and units. See Export program:settings:DGN
origin and units DGW Editor
overview, 7-67 procedure, 7-67
DGW files. See Also charts:DGW files creating, 7-61
DGW Editor, 7-67 definition, 9-2 DGW Editor, 7-67 editing, 7-65 overview, 1-34
differential mode, 3-23, See GPS:positioning modes DIG files
creating-Shore Manual program, 7-66 definition, 9-2 editing, 7-67
digitizer drivers, 7-60, 7-65 digitizing programs
Chart program, 7-60 DGW Editor, 7-67 Echogram program, 7-65 Shore Manual, 7-66 XYZ Collector, 7-69
directory structure, 1-20 overriding target paths, 3-33 survey files-raw, 3-7
discharge displaying
ADCP Profile, 7-102 discharge reports, 7-106 distance from beginning of line. See DBL (Distance from
Beginning of Line) distance measurements
Channel Condition Reporter, 7-127 Dredgepack. See distance measurements:Survey Hypack Max, 1-7, 1-20 Side Scan Survey, 5-8, 5-9 Single Beam Max, 4-22, 4-33 Survey, 3-34 TIN Model program, 6-78
distance units. See geodetic parameters:distance units DOP history, 3-49 draft table. See Also squat and settlement table draft/squat corrections
applying Hardware, 2-114, 7-10 Single Beam Max, 4-19 Survey, 3-46, 3-48
creating Hardware. See draft table
displaying Dredgepack, 8-7 Memory Viewer, 3-49 Single Beam Max, 4-24, 4-28 Survey, 3-49
editing Single Beam Max, 4-11
exporting Export, 6-115 Memory Output Program, 3-50
warning, 2-114 dredge shapes
creating 3D Shape Editor, 7-19 Dredgepack, 8-8
displaying 3D Terrain Viewer, 7-156 Dredgepack, 8-6
Dredge Viewer. See 3D Terrain Viewer:Matrix 3DTV Dredgepack
bucket patterns, 8-2, 8-18 capping, 8-18 color settings, 8-5 procedure, 8-1 settings
alarms, 8-9 boat shapes, 8-7 colors, 8-19 matrix options, 8-13
volume estimates, 8-21 windows
cut profile, 8-3 data display. See Survey:windows:data display window left-right indicator, 8-3
dredging contours, 6-43 driver setup dialog, 2-79, 2-83
Hardware GPS, 2-106 MRUs, 2-82 parallel helmsman, 2-119 towfish, 2-130
Side Scan Hardware, 5-2 dual frequency data
ADCP Profile, 7-102 Cross Sections and Volumes, 6-33 Export program, 6-22, 6-107 Hypack Max, 1-14 Hyplot Max, 6-9 Mapper, 4-33, 4-34 overview, 2-111 Single Beam Max, 4-22, 4-27 Sort program, 4-39
dual monitors, 1-2, 2-116–2-117, 3-24 DXF and DGN Parameters. See Export
program:settings:DXF and DGN Parameters DXF files. See Also charts:DXF files
ADCP to DXF, 7-109 Channel Condition Reporter, 7-128 definition, 9-2 Export, 6-107, 6-113 exporting
ADCP Profile, 7-107 Cross Sections and Volumes, 6-37 DXF to LNW conversion, 2-76 Export, 6-107 Hyplot Max, 6-20 TIN Model program, 6-85
Hypack Max, 1-35 converting to survey lines, 2-76
loading Channel Condition Reporter, 7-128 Export, 6-104
xii HYPACK® MAX Manual 1/05
Hypack Max, 2-1 overview, 1-35
EC1 records, 2-111, See Also survey files-raw EC2 records, 2-111, See Also survey files-raw, dual
frequency data Echogram program
overview, 1-46, 7-65 procedure, 7-65 settings
event marks, 7-65 scale, 7-65
Echosounder Display overview, 1-43, 3-54 procedure, 3-54 settings, 3-54
echosounders annotation, 2-83, 2-114, 2-122 as boat origin, 2-90 calibrating, 2-114
bar check, 2-114 bar check theory, 9-41 Latency Test, 2-141–2-144 overview, 7-10
calibration warning, 2-114 data. See survey files-raw function
beam output, 9-39 beam reflection, 9-39 hard vs soft bottom, 9-39 sensitivity setting, 9-40 threshold setting, 9-40
multiple transducer offsets, 2-111 types
dual frequency, 2-111 multibeam, 2-112 multiple transducer, 2-111 single beam, 2-110
ECM records, 2-111, See Also survey files-raw edit directory, 1-20 elevation
camera controls 3DTV, 7-162, 7-163, 7-164
elevation mode ADCP Profile, 7-102 Dredgepack, 8-14 Geodetic Parameters program, 2-13 Line Editor, 2-51 Single Beam Max, 4-10, 4-11, 4-15 Survey, 3-41 TIN Model program, 6-72
elevations-corrected, 4-7, 4-10, 4-19 ellipsoid height, 2-82, 2-98, 2-100, 2-104, 2-106, 9-25 ellipsoids. See Also reference ellipsoid
definition, 9-24 selecting
Datum Transformations program, 2-26 Geodetic Parameters, 2-12, 2-19, 2-20
enabling project files. See project files:enabling
end area 1volumes calculations, 6-44 end area 2 volumes calculations, 6-45 end area 3 volumes calculations, 6-46
ending line, 3-61 event taps. See parallel event boxes events
annotation echosounders, 2-83, 2-114 parallel event boxes, 2-122
connecting Survey, 3-4
creating. See Also events:logging Echogram program, 7-65 Survey, 3-62–3-63
displaying Cross Sections and Volumes, 6-33 Hypack Max, 1-16, 6-7 Side Scan Survey, 5-19 Single Beam Max, 4-22 Survey, 3-4, 3-13
labeling Hypack Max, 1-16, 6-7 Survey, 3-4
logging, 3-62–3-63, 3-66 printing, 3-66 settings, 3-4, 3-62
examples Advanced Channel Design
adding toes, 7-56 LNW to CHN, 7-58
Border Editor clipping survey lines, 2-59
Cross Sections and Volumes calculation method comparison, 6-58 changing templates, 6-56 channel plan, 6-64 session setup, 6-53
Geodetic Parameters local grids, 2-21
Hardware program, 2-136 Harmonic Tides program, 7-3 Hypack Max
enabling files, 4-1 Line Editor
clipping survey lines, 2-59 cursor and offset method, 2-47 spreadsheet and offset method, 2-44
Manual Tides high-low water times and heights, 7-5 manual observations, 7-7
Matrix Editor, 2-153 Plotting Sheet Editor, 2-150 Statistics program, 7-125 TIN Model program
cutting sections, 6-79 TIN to Channel volumes calculation, 6-99 TIN to level volumes calculation, 6-101 TIN to TIN volumes calculation, 6-102
Export program color settings, 6-110, 6-111 overview, 1-46, 6-104 settings
custom formats, 6-114 DGN origin and units, 6-108 DXF and DGN file parameters, 6-107
HYPACK® MAX Manual 3/03 • xiii
DXF/DGN planned line parameters, 6-108 DXF/DGN shoreline parameters, 6-109 DXF/DGN sounding parameters, 6-109 DXF/DGN target file parameters, 6-111 DXF/DGN tic parameters, 6-111 DXF/DGN tracklines parameters, 6-112 input options, 6-107 user-defined formats, 6-114 XYZ parameters, 6-113
Export to Line File program overview, 2-76 procedure, 2-76 warnings, 2-78
external programs adding menu items, 9-43 deleting menu items, 9-44 editing tool options properties, 9-44 launching, 9-43
faces checking
Advanced Channel Design, 7-46, 7-49 convexity, 7-48 creating
3D Shape Editor, 7-29 Advanced Channel Design, 7-48
editing 3D Shape Editor, 7-29, 7-38 Advanced Channel Design, 7-48
orientation Advanced Channel Design, 7-49
FGDC standard, 7-74 file information
Single Beam Max, 4-31 file types, 9-1 fill values, 6-35 filters
Dredgepack, 8-14 RTK tides, 2-107 Single Beam Max, 4-16–4-17, 4-29, 4-30, 4-34 Survey, 2-107, 3-41
fix marks. See events flattening, 2-20, 9-24 flight modes, 7-143
circle, 7-145 LNW file, 7-144 manual, 7-143 survey, 7-144
fluxgate compasses, 2-125 follow boat
Side Scan Survey, 5-11 Survey, 3-14
fonts ADCP Profile, 7-101, 7-107 Channel Condition Reporter, 7-136 Cross Sections and Volumes, 6-32 Hypack Max
depths, 1-14 grid labels, 1-13 trackline labels, 1-16, 6-7
Hyplot Max depths, 6-9 grids, 6-6
labels, 6-16, 6-17 survey lines, 6-10, 6-22 targets, 6-11
Scheme Builder, 3-11 Survey. See Also fonts:Scheme Builder
data display window, 3-19 left-right indicator, 3-16 line labels, 3-15 screen text, 3-15 targets, 3-15
forward offsets. See offsets:Hardware program:forward frequency
beam. See acoustics theory:beams:beam frequency update. See update frequency
gain Analog Side Scan, 5-3 Side Scan Survey, 5-13
GEN files Metadata program, 7-78
geodesy. See Also geodetic parameters definition, 9-24 programs
7-Parameter Datum Transformation program. See Seven Parameter Datum Transformation program
Datum Transformation program. See Datum Transformation program
Geodetic Parameters program. See Geodetic Parameters program
Grid Conversion program. See Grid Conversion program Inverse. See Inverse program Project Converter. See Project Converter Traverse. See Traverse program Unit Conversion program. See Unit Conversion program
theory, 9-5–9-32 datum transformations, 9-26 datums, 9-26 ellipsoids, 9-24 geoids, 9-26 projections, 9-28
geodetic distance calculating, 2-25, 2-34–2-35
geodetic inverse dialog, 2-34 geodetic parameters. See Also Datum Transformations
program, Geodetic Parameters program, Geodesy charts, 3-32 converting, 2-36 datum transformation parameters, 2-13, 2-26
3-parameter, 2-14, 2-32 7-parameter, 2-15, 2-32 no datum transformation, 2-14
displaying Hyscan, 5-22
distance units, 2-19, 2-20, 2-25, 2-34, 2-131 ellipsoid, 2-12, 2-20 flattening, 2-20 georeferencing ARCS charts, 2-5 grids
local grids, 2-21 predefined, 2-19 user-defined, 2-20
multiple regression formulas, 2-18 NIMA, 2-17
xiv HYPACK® MAX Manual 1/05
projection parameters, 2-81 projections, 2-20 saving, 2-25 scale factor, 2-20 semi-major axis, 2-20 Survey, 3-2 Use Corpscon, 2-16 zones, 2-19
Geodetic Parameters program overview, 1-42, 2-12 procedure, 2-12 settings. See geodetic parameters
geoid model, 2-13 geoids, 9-26 Global Positioning System. See GPS GPS
antenna array, 2-125 calibrating
Latency Test, 2-141–2-144 dual GPS systems, 2-125 offsets
latency, 2-90, 2-141 position information, 2-98 positioning modes, 2-108
differential, 2-97 RTK (Real Time Kinematic), 2-97, See Also tide
corrections:RTK stand alone, 2-97
settings device setup, 2-105 driver setup, 2-106 offsets. See GPS:offsets
time tagging, 2-99–2-104 1PPS pulse, 2-100 fixed latency, 2-103 methods comparison, 2-100 synch. clock with ZDA, 2-82, 2-103, 2-106 ZDA and synch. clock, 2-100
warnings ellipsoid height vs mean sea level, 2-99 position accuracy warning, 2-99 update frequency affects sync clock accuracy, 2-82, 2-106
Graphical Motion Reference Unit, 3-57 Grid Conversion program
overview, 1-47, 2-25, 2-33 procedure, 2-33
grid conversions, 2-12, 2-33 grids
calculating depth differences, 6-92, 6-93, 7-14 color settings, 1-12 displaying
ADCP Profile, 7-100 Channel Condition Reporter, 7-131 Hypack Max, 1-12 Hyplot, 6-5 TIN Model program, 6-72
labeling ADCP Profile, 7-101 Cross Sections and Volumes, 6-32 Export program, 6-111 Hypack Max, 1-12 Hyplot Max, 6-6
local grid, 2-21 selecting
local grids, 2-21 predefined grids, 2-19 user-defined grids, 2-20
universal transverse mercator. See grids:UTM UTM, 9-30
gyros alignment, 2-92 correcting data, 7-72 default vessel orientation, 2-81, 2-105 multibeam acoustics, 9-35 offsets, 2-92 survey quality, 2-125
hard drive, 1-2 hardlock keys, 1-2
ARCS permit numbers, 2-2 Hardlock Test, 7-111
Hardlock Test ARCS permit numbers, 2-2 overview, 1-48, 7-111 procedure, 7-111 troubleshooting, 7-112
hardware disabling devices, 2-96 GPS
warnings, 2-82, 2-106 multibeam survey devices, 9-35 PC system requirements, 1-2, 1-3 selecting devices, 2-79–2-80, 2-118, 2-120, 2-122, 2-127, 2-
138, See Also device drivers serial, 2-86 side scan, 5-1–5-6 single beam survey devices, 9-35 testing connections, 2-87 update frequency, 9-38
Hardware program example, 2-136 overview, 1-42, 2-78 procedure, 2-78 selecting devices, 2-79–2-80, 2-118, 2-120, 2-122, 2-127, 2-
138, See Also device drivers settings
connect, 2-78, 2-85, See Also Hardware program:settings:serial connections, Hardware program:settings:parallel connections, Hardware program:settings:output to file
device setup dialog, 2-79, 2-80, See Also device setup dialog
disabling devices, 2-96 dredge hoppers, 2-136 driver setup dialog, 2-79, 2-83 editing, 2-97 heading devices, 2-125 latency, 2-79, 2-89, 2-91, 2-103, 9-38 MRUs, 2-82 network connections, 2-86 offsets, 2-79, 2-89–2-94 offsets-dual frequency transducer, 2-111 output to a file, 2-86, 2-87 parallel connections, 2-85, 2-119 parallel event box, 2-122–2-123
HYPACK® MAX Manual 3/03 • xv
parallel helmsman displays, 2-118–2-119 pitch, 2-79, 2-92 record basis, 2-79, 2-84 roll, 2-79 saving, 2-79, 2-96, 2-130 serial connections, 2-86, 2-87, 2-121 serial helmsman displays, 2-120–2-121 stations, 2-79, 2-94, 2-96 towfish, 2-127–2-131, 2-136 USB connections, 2-120 USB helmsman displays, 2-119 yaw, 2-79
warnings update frequency affects sync. clock accuracy, 2-82, 2-
106 harmonic constituents, 7-2 HCF files
Seabed Statistics, 7-114, 7-121 HCP records, 2-123 heading (camera)
3DTV, 7-167 camera controls
3DTV, 7-164 heading (vessels)
3D Terrain Viewer, 7-144 ADCP Logger, 7-89, 7-98 correcting data
Multibeam Max, 2-146 Data Adjustments, 7-72 definition, 9-36 devices
Hardware, 2-125 Survey, 2-125
displaying Hyscan, 5-22 Memory Viewer, 3-49 Side Scan Survey, 5-8 Single Beam Max, 4-25 Survey, 3-17, 3-49
measuring, 2-125, See Also gyros settings
Hardware, 2-81, 2-105, 2-125 Hysweep Hardware, 2-125
Survey heading/speed indicator, 3-57
heading/speed indicator, 3-57 heave
correcting data Data Adjustments program, 7-72 Single Beam Max, 4-18–4-20
displaying Memory Viewer, 3-49 Single Beam Max, 4-24 Survey, 3-17, 3-49
measuring. See MRUs merging with RTK tide, 4-19, 7-17 replacing with average RTK tides, 4-19, 7-17
heave compensators. See MRUs height offset. See offsets:Hardware program:height helmsman displays, 3-12, 3-24
overview, 2-115 parallel, 2-115, 2-117
connect settings, 2-119 device setup, 2-118 driver setup, 2-119
serial, 2-115, 2-120 connect settings, 2-121 device setup, 2-120
USB connect settings, 2-120
video splitters, 2-115, 2-116, 2-117 virtual screens, 2-115–2-116
HS2 files definition, 9-4
HSX files definition, 9-4 Hyscan, 5-19 Side Scan Survey, 5-16
Hypack Hardware device drivers, 9-15
Hypack Max color settings, 1-8, 1-11
day/night colors, 1-11 depths, 1-13
installation, 1-4 legend, 1-15 procedure
running external programs, 9-43 screen controls, 1-7 settings
depth display, 1-13 display, 1-7 fonts, 1-13, 1-14, 1-16, 6-7 grid display, 1-12 language, 1-20 tools, 9-43 trackline display, 1-15
system requirements, 1-2, 1-3 tools, 9-43 user interface, 1-4–1-20
information bar, 1-19 screen control bar, 1-7
warnings overwriting files, 1-23
Hyplot Max color settings
color bar, 6-17 matrix, 6-9 north arrow, 6-17
colors, 6-4 overview, 1-46, 6-1 plotting sheet information, 6-3 procedure, 6-1 settings, 6-2
color settings, 6-4, 6-17 DXF converson options, 6-21 export to DXF, 6-20 fonts, 6-6, 6-9, 6-10, 6-11, 6-16, 6-17, 6-22 matrix, 6-9 planned lines, 6-22 plotting, 6-2 plotting methods, 6-20 printing, 6-2 soundings, 6-7, 6-22
xvi HYPACK® MAX Manual 1/05
targets, 6-10, 6-23 title blocks, 6-11 tracklines, 6-23
Hyscan activity report, 5-23 color settings, 5-24 overview, 5-19 procedures
building mosaics, 5-30, 5-31 exporting TIF files, 5-30, 5-31 measuring horizontal distances, 5-24 measuring towfish altitude, 5-24 measuring vertical distances, 5-24 Mosaic View, 5-20 Scan View, 5-20
screen captures, 5-30 printing, 5-30 saving, 5-30
settings bitmaps, 5-30 colors, 5-24 file list, 5-21 mosaic, 5-31 print, 5-29 print options, 5-30 threshold, 5-28 towfish altitude, 5-28 towfish altitudes, 5-26, 5-27 view options, 5-23, 5-24 view ratio, 5-24
windows activity log, 5-23 amplitude window, 5-24 geodesy, 5-22 image view, 5-23, 5-30 mosaic view, 5-21, 5-30, 5-31 scan view, 5-21, 5-22
Hysweep Hardware overview, 1-42 settings
latency, 9-38 offsets, 2-89, 2-111 offsets-multiple transducer, 2-111
Hysweep Survey settings
colors, 5-12 display options, 5-13 gain, 5-13 side scan waterfall window, 5-12
windows side scan waterfall window, 5-8
ignore checksum, 2-109, 5-2 information query, 1-7 input format
Datum Transformation, 2-16 Line Editor, 2-42 Plotting Sheet Editor, 2-149
installation-Hypack Max, 1-4 Inverse program
overview, 1-47, 2-25, 2-34 printing screen, 2-35 procedure, 2-34
settings geodetic parameters, 2-34
IP addresses Hardware, 2-86 Window Viewer, 3-25
JPG files 3D Terrain Viewer, 7-168 Hyplot Max, 6-12, 6-15 Side Scan Survey, 5-9 Title Block Editor, 6-13
KAP files. See BSB charts keyboard commands
3D Shape Editor, 9-8 3D Terrain Viewer, 7-161, 9-7 Dredgepack, 8-18 Side Scan Survey, 5-15 Statistics program, 7-124 Survey, 9-6
kinematic tidal datum files. See KTD files, KTD Editor KTD Editor
overview, 1-41 procedure, 7-14–7-15
KTD files creating, 7-14 definition, 9-2 overview, 1-38, 7-10, 7-12 saving, 7-15
labels boats. See boats depths
ADCP Profile, 7-101 ADCP to DXF, 7-110 Cross Sections and Volumes, 6-32 Hypack Max, 1-13 Hyplot Max, 6-7, 6-22
events Survey, 3-4
grids ADCP Profile, 7-101 Cross Sections and Volumes, 6-32 Export program, 6-111 Hypack Max, 1-12 Hyplot Max, 6-6
survey lines 3D Terrain Viewer, 7-151 Channel Design Max, 2-71 DXF to LNW conversions, 2-77 Hyplot Max, 6-22 Line Editor, 2-43, 2-46 Survey, 3-61, 3-65
targets 3D Terrain Viewer, 7-158 Hypack Max, 1-19 Hyscan, 5-26 Survey, 3-36 Target Editor, 2-147
tracklines Hypack Max, 1-15
vectors ADCP to DXF, 7-110
language Hypack Max, 1-20
HYPACK® MAX Manual 3/03 • xvii
program modules, 1-20 latency. See Also offsets:Hardware program:latency,
offsets:Hysweep Hardware:latency, calibration calculating offset adjustments
Latency Test program, 2-141–2-144 correcting data
Multibeam Max, 2-146 Single Beam Max, 2-146
displaying Multibeam Max, 2-146 Single Beam Max, 2-146, 4-15
editing Multibeam Max, 2-146 Single Beam Max, 2-146, 4-15
overview, 9-38 settings
Hardware, 2-79, 2-89, 2-91 Transducer Offsets program, 2-93
Latency Test overview, 1-42, 2-141 procedure, 2-142 settings
read parameters, 2-142 latitude, 9-25 LBL systems, 2-136 left-right indicator
cross track error alarm, 3-4 floating text, 3-17 fonts, 3-16 overview, 3-12, 3-16, 8-3 scale, 3-16
legends ADCP Profile
print option, 7-107 Cross Sections and Volumes
graph option, 6-33, 6-41 Hypack Max, 1-15 TIN Model program, 6-72
Line Editor clipping survey lines, 2-57 example
clipping survey lines, 2-59 cursor and offset method, 2-47 spreadsheet and offset method, 2-44
importing LIN files, 2-56 input format, 2-42 overview, 1-41, 2-42 procedure, 2-57
appending files, 2-55 applying channel templates, 2-52 creating channel templates, 2-51 creating survey lines, 2-41, 2-42, 2-46 removing channel templates, 2-52
line spacing Channel Design Max, 2-63, 2-71 Line Editor, 2-40
LLS files. See datum transformation parameters:calculating:CORPSCON function
definition, 9-2 LNW files
3D Terrain Viewer, 7-151 Advanced Channel Design, 7-46
Channel Design, 2-39 Channel Design Max, 2-62 definition, 9-2 Dredgepack, 8-3 Line Editor, 2-42, 2-44, 2-57 overview, 1-39 Pathfinder program, 7-82 Remap, 7-80 Single Beam Max, 4-12, 4-13 Survey, 3-20
LNW to CHN. See Advanced Channel Design:procedure:creating a CHN file from an LNW file
local grids, 2-21 LOG files. See Also catalog files
ADCP Profile, 7-99, 7-100 Cross Sections and Volumes, 6-25 Cross Sort program, 4-40, 4-41 Data Adjustments, 7-71 definition, 9-2 Hyplot Max, 6-2 Hyscan, 5-21 Latency Test, 2-142 Merge XYZ, 7-83 Pathfinder, 7-82 Seabed Statistics, 7-114, 7-115, 7-117 Side Scan Survey, 5-21 Single Beam Max, 4-8 Sort program, 4-38, 4-39 Statistics program, 7-122 Survey, 3-7, 3-61 TIN Model program, 6-67, 6-68, 6-69, 6-94
logging status ADCP Logger, 7-85, 7-88 Side Scan Survey, 5-7 Survey, 3-17, 7-88
longitude, 9-25 LPT ports. See Hardware program:settings:parallel
connections Manual Entry program
overview, 1-47, 7-72 procedure, 7-72
Mapper, 4-37, 4-42–4-47 overview, 1-45, 4-42 procedure, 4-43 , 4-47 settings
color, 4-45 data selection, 4-44 matrix, 4-46
statistics, 4-47 Matrix 3DTV. See 3D Terrain Viewer:Matrix 3DTV Matrix Editor
example, 2-153 overview, 1-41, 2-151 procedure, 2-152 settings, 2-152
matrix files. See Also MTX files color settings
Dredgepack, 8-16 Hyplot Max, 6-9 Scheme Builder, 3-10
xviii HYPACK® MAX Manual 1/05
Survey, 3-44 creating
Matrix Editor, 2-152 Multibeam Max, 8-12 TIN Model, 6-89 XYZ to MTX program, 2-155
displaying Dredgepack, 8-2, 8-9 Hypack Max, 2-153, 2-156 Side Scan Survey, 5-10, 5-11, 5-16 Survey, 3-12, 3-13, 3-24
editing Matrix Editor, 2-156 Survey, 3-42
erasing depths, 3-40 filling
Dredgepack, 8-15 Mapper, 4-44 Multibeam Max, 8-12 Scheme Builder, 3-10 Survey, 3-10, 3-40–3-44 TIN Model program, 8-10 XYZ to MTX program, 2-154
legends Dredgepack, 8-16 Survey, 3-44
loading 3D Terrain Viewer, 7-138 Dredgepack, 8-13, 8-15 Hyplot Max, 6-2 Mapper, 4-43 Side Scan Survey, 5-16 Survey, 3-2, 3-15, 3-40 TIN Model program, 6-90, 6-94
matrix type, 5-17 naming
Matrix Editor, 2-152 XYZ to Matrix program, 2-155
overview, 1-38, 2-151 plotting, 6-2, 6-9 positioning
Multibeam Max, 8-12 XYZ to MTX program, 2-155
saving Dredgepack, 8-17 Matrix Editor, 2-152, 2-156 Survey, 3-45
Scheme Builder, 3-10 seabed identification
TIN Model, 1-14, 6-89 selecting. See matrix files:loading settings
Hyplot Max, 6-9 Mapper, 4-46 Matrix Editor, 2-152 Scheme Builder, 3-10 TIN Model program, 6-89 XYZ to MTX program, 2-155
show differences, 8-15 show dredge data, 8-13 show original data, 3-42, 8-15 soundings in. See matrix files:filling
unloading Dredgepack, 8-13 Side Scan Survey, 5-16 Survey, 3-40
update basis Dredgepack, 8-14 Survey, 3-41
warning editing filled matrix, 2-156
matrix options dialog Dredgepack. See Dredgepack:settings:matrix options
Memory Output program overview, 1-43, 3-50 procedure, 3-51 settings
data selection, 3-51 output format, 3-52
Memory Viewer , 3-49 DOP history, 3-49 overview, 1-43, 3-49 procedure, 3-49 satellite history, 3-50 vessel information, 3-49
mercator projections. See projections:mercator Merge XYZ
overview, 7-83 procedure, 7-83
MET files. See metadata metadata
creating, 7-75, 7-78 saving, 7-79
Metadata program overview, 1-47, 7-74 procedure, 7-75 saving the project, 7-79 settings
property dialogs, 7-76 symbols, 7-76 tree view, 7-75
Metric File Converter overview, 1-47, 7-79 procedure, 7-79
mobiles. See towfish model types
3D Shape Editor, 7-21 TIN models, 6-74
mosaic definition, 5-20
mosaics. See Hyscan:windows:mosaic view Motion Reference Units. See MRUs motion sensors. See MRUs movie controls. See 3D Terrain Viewer:movies MRUs (Motion Reference Units). See Also heave, pitch,
roll multibeam acoustics, 9-35 overview, 2-123 settings
Hardware, 2-82, 2-123 Single Beam Max, 4-18, 4-19
MST files Hyscan, 5-19
HYPACK® MAX Manual 3/03 • xix
MTX files. See Also matrix files 3D Terrain Viewer, 7-138 definition, 9-2 Dredgepack, 8-9 Hyplot Max, 6-2 Mapper, 4-38 Matrix Editor, 1-38, 2-151 Scheme Builder, 3-10 Side Scan Survey, 5-10, 5-11, 5-16 Survey, 3-39 TIN Model program, 6-89, 6-94 XYZ to MTX program, 1-48, 2-154, 8-10
Multibeam Max overview, 1-44
multiple regression formulas. See geodetic parameters:multiple regression formulas
multiple transducers offsets
Hysweep Hardware, 2-111 Transducer Offsets program, 2-93
National Imagery and Mapping Agency. See geodetic parameters:NIMA
navigation parameters, 3-3 navigation station editor. See Hardware
program:settings:stations navigation stations
adding, 2-79, 2-94 editing, 2-79, 2-96
navigation system Hardware, 2-97
networks broadcasting data, 3-53 broadcasting Survey windows, 3-24 connecting
Hardware, 2-86 copying projects, 1-24 duplicating projects, 1-24 exporting data
3D Shape Editor, 7-45 project management, 1-21, 1-23 system requirements, 1-3
NIMA. See geodetic parameters:NIMA NMEA message strings, 2-99, 2-100, 2-104
exporting, 3-55 NMEA Output program
overview, 1-43, 3-55 procedure, 3-55
NOAA tides importing to Manual Tides program, 7-8 NOAA tide book, 7-5
nodes Advanced Channel Design, 7-46 KTD files, 7-15
north arrow Hyplot Max, 6-17 Survey, 3-15
object editor Channel Condition Reporter, 7-127
object files creating
ADCP Profile, 7-105 Cross Sections and Volumes, 6-29
loading Cross Sections and Volumes, 6-29
saving ADCP Profile, 7-105 Cross Sections and Volumes, 6-30
object properties 3D Shape Editor, 7-31–7-41
visibility, 7-37 rotation, 7-33 translation, 7-32
Odometer overview, 1-43, 3-56 procedure, 3-56
off line tolerance, 7-81 offsets
Boat Shape Editor-anchors, 3-29 calculating
Latency Test, 2-141 calculating offset adjustments
Latency Test, 2-141–2-144 correcting data
Data Adjustments program, 2-145, 7-72 Multibeam Max, 2-146 Single Beam Max, 2-146, 4-16
creating Line Editor, 2-40
displaying Multibeam Max, 2-146 Single Beam Max, 2-146, 4-15 Survey, 3-17
editing Multibeam Max, 2-146 Single Beam Max, 2-146, 4-15
Hardware latency, 9-38
Hardware program, 2-89–2-94 forward, 2-89, 2-90, 2-91 height, 2-91, 2-114, 2-126 latency, 2-79, 2-89, 2-91, 2-103 pitch, 2-79, 2-92 roll, 2-79, 2-93 starboard, 2-89, 2-90, 2-91 yaw, 2-79, 2-92
Hysweep Hardware latency, 9-38 pitch, 2-92 roll, 2-93 yaw, 2-92
measuring, 2-90, 2-137 mobiles, 2-128–2-130 multibeam acoustics effects, 9-36 multiple transducers, 4-10
Hysweep Hardware, 2-111 Transducer Offset program, 2-93
Side Scan Hardware latency, 5-5
survey lines. See survey lines:creating:Line Editor towfish, 2-128–2-130 Transducer Offsets program, 2-93
latency, 2-93 offsets dialog. See Hardware program:settings:offsets operating system, 1-2
xx HYPACK® MAX Manual 1/05
orientation area map
Channel Condition Reporter, 7-127 Hypack Max, 1-7, 1-8 Survey, 3-14
boat. See heading overdredge bases, 6-35, 6-43 overdredge limit, 6-26, 6-40, 6-41, 6-43, 6-99 overlay
Cross Sections and Volumes, 6-25 Export, 6-108 Hyplot Max, 6-5, 6-11 Seabed Statistics, 7-118 Single Beam Max, 4-34 TIN Model, 6-82, 6-87
parallel event boxes connect settings, 2-122 device setup, 2-122 overview, 2-121
parallel hardware connections, 2-85 parallel helmsman displays. See helmsman
displays:parallel Patch Test
overview, 1-42, 1-44 Pathfinder program
overview, 1-47, 7-82 procedure, 7-82 settings
setup dialog, 7-82 PC. See hardware:PC system requirements Philadelphia method
box templates, 6-28 calculation method comparison, 6-40 setup, 6-35 volumes calculations
Cross Sections and Volumes, 6-49 TIN Model, 6-67, 6-69, 6-71, 6-78, 6-95
pitch (camera) camera controls
3DTV, 7-166 pitch (devices)
correcting data Data Adjustments program, 7-72 Multibeam Max, 2-146
displaying Multibeam Max, 2-146 Single Beam Max, 4-15
editing Multibeam Max, 2-146 Single Beam Max, 4-15
offsets Hardware, 2-79, 2-92 Hysweep Hardware, 2-92
pitch (vessel) correcting data
Single Beam Max, 4-18–4-20 definition, 9-36 displaying
ADCP Logger, 7-89 Memory Viewer, 3-49 Single Beam Max, 4-25 Survey, 3-17, 3-49
measuring. See MRUs planned line files. See LNW files, survey lines playback
Side Scan Survey, 5-6 Side Scan Survey, 5-7
PLN files 3D Terrain Viewer, 7-151 Channel Design Max, 2-62 definition, 9-2 Dredgepack, 8-3 overview, 1-38 Survey, 3-20
Plotting Sheet Editor example, 2-150 overview, 1-42, 2-148 procedure, 2-148
plotting sheet files color settings, 2-148 creating
Plotting Sheet Editor, 2-148 editing, 2-151
Plotting Sheet Editor, 2-151 overlaying
Cross Sort, 4-40 overview, 1-39 plotting
Hyplot Max, 6-2 Survey, 3-65
positioning cursor method, 2-149 spreadsheet method, 2-149
saving Plotting Sheet Editor, 2-149, 2-151
selecting Cross Sort, 4-41 Hyplot Max, 6-2
sizing cursor method, 2-149 spreadsheet method, 2-149
plotting sheet information, 6-3, 6-20 plotting sheets
DXF format, 6-20 exporting
Hyplot Max, 6-20, 6-21 PLT files
Cross Sort, 4-38 definition, 9-2 Hyplot Max, 6-2 Plotting Sheet Editor, 2-148
point editing Single Beam Max, 4-32
polysection TIN models, 6-77 POS. See survey files-raw:POS data positions (3DTV elements)
camera, 7-167 lighting, 7-147, 7-148 water surface, 7-149
positions (boats). See Also follow boat, cross track error, GPS, heading, events, tracklines
correcting Project Converter, 2-36
displaying
HYPACK® MAX Manual 3/03 • xxi
ADCP Logger, 7-89 Side Scan Survey, 5-8, 5-10, 5-11 Single Beam Max, 4-28 Survey, 3-13, 3-16, 3-18, 3-24, 3-27
Dredgepack, 8-13 data display window. See positions (boats):Survey:data
display window left-right indicator, 8-3
Hyplot Max, 6-23 Pathfinder, 7-82 Side Scan Survey, 5-8, 5-18 Single Beam Max, 4-22 Survey
area map, 3-13, 3-24, 3-27 data display window, 3-17, 3-24 left-right indicator, 3-16, 3-24 Memory Viewer, 3-49 NMEA Output, 3-56 target properties, 3-35
positions (charts). See orientation:area map, geodesy, geodetic parameters
Chart program, 7-60, 7-61 positions (cursor)
ADCP Profile, 7-106 Channel Condition Reporter, 7-127 displaying
Hyscan, 5-22 Hypack Max, 1-7, 1-19 Hysweep Survey, 5-9 Side Scan Survey, 5-9, 5-18 TIN Model program, 6-78
positions (devices). See Also offsets:Hardware, offsets:Hysweep Hardware,offsets:Transducer Offsets program, towfish:settings
anchors, 7-18 navigation stations, 2-94, 2-95, 2-96, 7-72
positions (files) Advanced Channel Design, 7-47 border files-Border Editor, 2-58 channel information
Channel Design Max, 2-64 chart features
Chart program, 7-61, 7-64, 7-65 charts
DGW Editor, 7-67 Echogram program, 7-65 matrix files
Matrix Editor, 2-152, 2-153, 2-156 plotting sheet files-Plotting Sheet Editor, 2-149, 2-151 sample coordinates-Seven Parameter Datum
Transformations program, 2-27 shoals
Channel Condition Reporter, 7-127, 7-135 Shore Manual, 7-66 survey files-raw, 2-104 survey lines
Channel Design Max, 2-62, 2-63, 2-64, 2-74 Line Editor, 2-38, 2-42
targets Side Scan Survey, 5-17, 5-18 Survey, 3-37, 3-38, 3-39 Target Editor, 2-147
target properties, 5-18 positions (soundings)
ADCP Logger, 7-88, 7-103 ADCP Profile, 7-102 Cross Sort, 4-38 Data Adjustments, 7-72 Echogram program, 7-65 Export, 6-113, 6-115 Hyplot Max, 6-23 Manual Entry, 7-73 Mapper, 4-38, 4-45 Pathfinder, 7-82 Single Beam Max
advanced read parameters, 2-124, 4-15, 4-18 display, 4-22, 4-27 merging digitized data, 7-65
Sort, 4-38 Survey
water's edge, 3-38 processing sequences
single beam data, 4-3 Project Converter
overview, 1-47, 2-36 procedure, 2-37 report, 2-37 settings, 2-37
project depth Channel Condition Reporter, 7-131 Cross Sections and Volumes, 6-43
project files compressing. See Compress Project disabling, 4-1
Export, 6-105 Hypack Max, 1-27 Hyplot Max, 6-2
displaying. See project files:enabling drawing. See project files:enabling, loading enabling, 4-1
Hypack Max, 1-28 Hyplot Max, 6-2
geodesy conversion, 2-36 loading, 1-27, 4-1 unloading, 1-28, 4-1
project information
Cross Sections and Volumes, 6-31 , 3-49 Single Beam Max, 4-16
, 3-49
input, 3-5, 3-33 printing
ADCP Profile, 7-107 , 3-6
project manager copying projects, 1-24 deleting projects, 1-26 directory path, 1-23 duplicating projects, 1-24 new projects, 1-22 opening projects, 1-23 overview, 1-21
xxii HYPACK® MAX Manual 1/05
restoring projects, 1-26 warnings
overwriting data, 1-25 projection parameters, 2-13, 2-81 projections, 2-20
conical, 9-31 mercator, 9-28 oblique mercator, 9-31 transverse mercator, 9-29
projects copying, 1-24 creating, 1-22 deleting, 1-26 directory path, 1-23 directory structure, 1-20 duplicating, 1-24 local, 1-22 network, 1-22 network capability, 1-23 opening, 1-23 removing, 1-26 restoring, 1-26 saving, 1-25 viewing, 1-22
QC tests Beam Angle Test, 1-44 Single Beam Test, 1-44
quality control tests. See QC tests quality data. See survey files-raw:quality data
saving target files, 3-35
quality filter Single Beam Max, 4-17
quick mark Side Scan Survey, 5-18 Survey, 3-33
r.000 files ADCP Logger, 7-84
RAM (Random Access Memory), 1-2 Random Access Memory. See RAM (Random Access
Memory) range radius, 3-27 range-azimuth positioning, 2-82, 2-94 range-range positioning, 2-82, 2-94, 2-95 RAW. See survey files-raw:RAW data raw directory, 1-20 raw format files. See Also survey files-raw, data files
definition, 9-4 Dredgepack, 8-13 Export, 6-109 Hypack Max, 4-1 overview, 1-28 Side Scan Survey, 5-6 Single Beam Max, 4-8, 4-9, 4-35 Survey, 3-6–3-7
reaches Channel Condition Report, 7-135 creating. See Channel Condition
Reporter:procedure:creating reaches, Cross Sections and Volumes:settings:channel plan
volumes calculations, 6-63 read filters
Single Beam Max, 4-14 read parameters
Latency Test. See Latency Test:settings:read parameters record basis, 2-79, 2-84 redraw, 1-27 reference ellipsoids. See Also ellipsoids
Geodetic Parameters, 2-13, 2-14 separation from chart datum, 7-13
reflection. See acoustics theory:beams:reflection Reformat program. See Export program, Export program refraction. See acoustics theory:beams:ray bending refresh. See redraw registering charts. See charts:registering Remap
overview, 1-47, 7-79 procedure, 7-80
reports ADCP Profile
discharge reports, 7-106, 7-108 Channel Condition Reporter, 7-135, 7-136 cross check statistics, 7-123, 7-124 Cross Sections and Volumes, 6-37
gap report, 6-34 top of bank report, 6-34 volumes, 6-38
FGDC compliant. See Metadata program Hyscan
activity log, 5-23 Metadata, 7-74 Project Converter, 2-37 Seven Parameter Datum Transformation program, 2-32 show lines report, 1-31, 1-39 TIN Model program, 6-93
roll (devices) correcting data
Data Adjustments program, 7-72 Multibeam Max, 2-146
displaying Multibeam Max, 2-146 Single Beam Max, 4-15
editing Multibeam Max, 2-146 Single Beam Max, 4-15
offsets Hardware, 2-79, 2-93 Hysweep Hardware, 2-93
roll (vessel) correcting data
Single Beam Max, 4-18–4-20 definition, 9-36 displaying
ADCP Logger, 7-89 Memory Viewer, 3-49 Single Beam Max, 4-25 Survey, 3-17, 3-49
measuring. See MRUs rounding options
Hypack Max, 1-14 Hyplot Max, 6-9
ROV's. See: towfish RTK positioning. See GPS:positioning modes RTK Tides. See tide corrections:RTK tide corrections
HYPACK® MAX Manual 3/03 • xxiii
RXW files. See Also Roxann program definition, 9-3 Hypack Max, 1-15
S-57 charts day/night colors, 3-11 display options, 1-17 information query, 1-7 overview, 1-36
Savannah method volumes calculations, 6-47 SB2 records, 2-112, See Also survey files-raw scale factor, 2-20, 2-23 Scheme Builder
color settings chart elements, 3-9 survey elements, 3-9 window elements, 3-12
overview, 3-7 procedure, 3-8 settings, 3-7
day/night colors, 3-11 fonts, 3-11 matrix colors, 3-10
text settings, 3-11 schemes. See Scheme Builder SCM files
Scheme Builder, 3-8, 3-9 Survey, 3-8
screen controls-Hypack Max, 1-7 seabed identification, 7-113
Hypack Max, 1-14 Hyplot Max, 6-8 , 4-47 matrix files, 1-14, 6-89 Seabed Statistics, 7-113, 7-114, 7-115, 7-119 Single Beam Max, 4-8, 4-23, 4-28 TIN Model, 6-73, 6-89
displaying
Hypack Max, 7-121 Seabed Statistics, 7-116 Survey, 7-121
, 4-46 modifying
Seabed Statistics, 7-114 Seabed Statistics, 7-113
seabed identification numbers assigning
Seabed Statistics, 7-116, 7-119 exporting
Seabed Statistics, 7-120 seabed identification squares
creating Seabed Statistics, 7-114
saving Seabed Statistics, 7-114
Seabed Statistics exporting to text, 7-120 overview, 1-48, 2-112, 7-113 procedures
creating an ID square, 7-114 displaying statistics, 7-117 editing statistics, 7-119
loading calibration points, 7-115 loading data files, 7-115
settings bottom classifications, 7-114, 7-116 calibration points, 7-114, 7-115 colors, 7-114, 7-116 seabed identification colors, 7-114 seabed identification numbers, 7-116 seabed identification square, 7-114
warnings data inclusion, 7-117
search criteria Single Beam Max, 4-30
search radius-Statistics program, 7-123 section lines
ADCP Profile, 7-104 Cross Sections and Volumes, 6-25, 6-37 Statistics program, 7-122 TIN Model, 6-67
sections-creating TIN Model program, 6-67
semi-major axis, 2-20, 9-24 semi-minor axis, 9-24 serial hardware connections. See Hardware
program:settings:serial connections,Hysweep Hardware program:settings:serial connections
serial hardware connections-testing, 2-87, 5-4 sessions
creating. See Cross Sections and Volumes:procedure saving. See Cross Sections and Volumes:settings:saving
settings 3D Shape Editor
advanced objects, 7-26, 7-27, 7-29 attachment points, 7-30 basic objects, 7-26 colors, 7-22, 7-35, 7-38 default color, 7-35 display options, 7-21 dredge arms, 7-30 faces, 7-38 groups, 7-41–7-44 mining lamp, 7-22 model types, 7-21 names, 7-40, 7-43 object properties, 7-31–7-41, 7-40, 7-43 rotation, 7-33 shading, 7-22 textures, 7-36, 7-38 translation, 7-32 transparency, 7-38 vessel origin, 7-30 visibility, 7-37 windows, 7-38
3D Terrain Viewer AVI, 7-169 boat shapes, 7-153 buffering, 7-171 camera position, 7-158, 7-159, 7-162 channel lines, 7-151 colors, 7-146, 7-149, 7-152 dredging equipment, 7-156 dynamic lighting, 7-147
xxiv HYPACK® MAX Manual 1/05
flight modes, 7-139, 7-143 frame rate, 7-171 GUI response, 7-170 model type, 7-145 movie controls, 7-168 survey lines, 7-151 targets, 7-158 terrain settings, 7-140 vertical scale, 7-148 water surface, 7-149
ADCP Logger data display options, 7-97 heading, 7-98 output format, 7-98 plan file, 7-87 tabular view options, 7-97 units, 7-96 velocity profile windows, 7-97 velocity reference, 7-96
ADCP Profile color settings, 7-103 cross section graph, 7-103 discharge/velocity data, 7-102 object files, 7-105 print options, 7-106 survey data, 7-102 survey lines, 7-104 view options, 7-103
ADCP to DXF:, 7-110 Analog Side Scan, 5-3 Channel Condition Report
turning basins, 7-130 Channel Condition Reporter
colors, 7-131 Channel Design Max
channels, 2-63, 2-65, 2-69 curved channel lines, 2-69 offset toes, 2-65 side slopes, 2-65, 2-68 survey lines, 2-69 toe shifts, 2-65 top of bank, 2-68 turning basins, 2-66
Cross Sections and Volumes box templates, 6-51 channel templates, 6-27, 6-34, 6-49 color settings, 6-30, 6-36 cross section graph, 6-36 print options, 6-37 view options, 6-36
Dredgepack alarms, 8-9 boat shapes, 8-7 colors, 8-19
Export program custom formats, 6-114 DGN origin and units, 6-108 DXF and DGN parameters, 6-107 DXF/DGN planned line parameters, 6-108 DXF/DGN shoreline parameters, 6-109 DXF/DGN sounding parameters, 6-109 DXF/DGN target file parameters, 6-111
DXF/DGN tic parameters, 6-111 DXF/DGN tracklines parameters, 6-112 input options, 6-107 user-defined formats, 6-114 XYZ parameters, 6-113
Geodetic Parameters program. See geodetic parameters Hardware program
connect, 2-78, 2-85, 2-86, 2-119 device setup, 2-79, 2-80 disabling devices, 2-96 dredge hoppers, 2-136 driver setup, 2-79, 2-83 editing, 2-97 heading devices, 2-125 latency, 2-79, 2-89, 2-91, 2-103, 9-38 MRUs, 2-82 network connections, 2-86 offsets, 2-79, 2-111 output to a file, 2-87 parallel connections, 2-85, 2-119 parallel event box, 2-122–2-123 parallel helmsman displays, 2-118–2-119 pitch, 2-79 record basis, 2-79, 2-84 saving, 2-79, 2-96, 2-130 serial connections, 2-86, 2-87, 2-121 stations, 2-79, 2-94, 2-96 towfish, 2-127–2-131, 2-136 USB connections, 2-120 USB helmsman displays, 2-119
Hypack Max colors, 1-8 depth display, 1-13 display options, 1-7 grid display, 1-12 tools, 9-43 trackline display, 1-15
Hyplot Max, 6-2 color settings, 6-17 colors, 6-4 export to DXF, 6-20 matrix, 6-9 planned lines, 6-22 plotting, 6-2 plotting methods, 6-20 printing, 6-2 soundings, 6-7, 6-22 targets, 6-10, 6-23 title blocks, 6-11 tracklines, 6-23
Hyplot Max program DXF conversion options, 6-21
Hyscan bitmaps, 5-30 colors, 5-24 mosaics, 5-31 print, 5-29 print options, 5-30 threshold, 5-28 towfish altitude, 5-28 towfish altitudes, 5-26, 5-27 view options, 5-23, 5-24
HYPACK® MAX Manual 3/03 • xxv
view ratio, 5-24 Hysweep Hardware
latency, 9-38 offsets, 2-89, 2-111 offsets-multiple transducer, 2-111
Hysweep Survey colors, 5-12 display options, 5-13 gain, 5-13 side scan signal window, 5-12
language Hypack Max, 1-20 program modules, 1-20
Latency Test read parameters, 2-142
Mapper color, 4-45 data selection, 4-44 matrix files, 4-46
matrix files Matrix File Editor, 2-152 Scheme Builder, 3-10 Survey, 3-40–3-44
Memory Output program data selection, 3-51 output format, 3-52
Project Converter, 2-37 Scheme Builder, 3-7
day/night colors, 3-11 matrix files, 3-10
Seabed Statistics bottom classifications, 7-114, 7-116 calibration points, 7-114, 7-115 colors, 7-114, 7-116 seabed identification colors, 7-114, 7-116 seabed identification numbers, 7-114, 7-116 seabed identification square, 7-114
Side Scan Hardware connect, 5-2 driver setup, 5-2 hull-mounted devices, 5-5 offsets, 5-5 saving, 5-1 serial connections, 5-3 towed devices, 5-5
Side Scan Survey alarms, 5-7 colors, 5-12 display options, 5-13 gain, 5-13 logging options, 5-16 matrix options, 5-16 side scan coverage map window, 5-11 side scan water fall window, 5-12 side scan waterfall, 5-8
Single Beam Max advanced read parameters, 2-124 color settings, 4-21 read parameters, 4-8 sound velocity corrections, 4-4, 4-10, 4-13 tide corrections, 4-10, 4-11
Survey
boat features, 3-24–3-29 broadcast, 3-24 color, 3-7 events. See events:settings, See events:settings left/right indicator, 3-16–3-17 logging options, 3-5, 3-58, 3-62 navigation parameters, 3-3 network, 3-53 print configuration, 3-65 profile window, 3-19 towfish, 2-126–2-134
TIN Model program color settings, 6-73 inital data, 6-68 shades, 6-73 view options, 6-71 views, 6-74–6-78, 6-74–6-78
Title Block Editor, 6-13–6-15 Transducer Offsets program
latency, 2-93 offsets-multiple transducer, 2-93
Window Viewer, 3-25 Seven Parameter Datum Transformation program
overview, 2-27 procedure, 2-27 report, 2-32 settings
coordinate configuration, 2-29 coordinate samples, 2-28 coordinate type, 2-29 transform type, 2-29
shapes. See boat shapes Shared Memory, 1-43, 3-48–3-57
Echosounder Display, 3-54 Graphical Motion Reference Unit, 3-57 heading/speed indicator, 3-57 Memory Output, 3-50, 3-53 Memory Viewer, 3-49 Nmea Output, 3-55 Odometer, 3-56
shoals Channel Condition Reporter, 7-127, 7-133, 7-135 Cross Sort program, 4-41 Dredgepack, 8-14
Shore Manual program editing the object list, 7-67 overview, 7-66 printing object list, 7-67 procedure, 7-67
shorelines digitizing
Chart program, 7-63 show lines report
catalog files, 1-31 LNW files, 1-39
SHP files Boat Shape Editor, 7-18, 7-19 definition, 9-3 Survey, 3-28
Side Scan Hardware COM Test, 5-4 device drivers, 9-24
xxvi HYPACK® MAX Manual 1/05
overview, 5-1 procedure, 5-1 selecting devices, 5-1, See Also device drivers settings
connect, 5-2 driver setup, 5-2 editing, 5-6 hull-mounted devices, 5-5 offsets, 5-5 saving, 5-1 serial connections, 5-3 towed devices, 5-5
side scan signal displaying
Hyscan, 5-24, 5-28 Side Scan Survey, 5-9
Side Scan Survey keyboard commands, 5-15 logging status, 5-7 overview, 5-6 playback, 5-7, 5-18 settings
alarms, 5-7 colors, 5-12 display options, 5-13 gain, 5-13 logging options, 5-16 matrix options, 5-16 side scan coverage map window, 5-11 side scan water fall window, 5-12 side scan waterfall, 5-8
windows, 5-7 coverage map window, 5-16 device controls, 5-15 main, 5-7 side scan coverage map, 5-17 side scan coverage map window, 5-10 side scan signal window, 5-9 side scan waterfall window, 5-8
side slopes Channel Design Max, 2-62, 2-63, 2-68
simulation 3D Shape Editor, 7-26
simulations Side Scan Survey, 5-6, 5-18
Single Beam Max exporting to text, 4-35 overview, 1-44 procedure, 4-7 settings
advanced read parameters, 2-124, 4-18 color settings, 4-21 display options, 4-25–4-30 read parameters, 4-8 search and filter options, 4-30 sound velocity corrections, 4-4, 4-10, 4-13 tide corrections, 4-10, 4-11
statistics, 4-31 file information, 4-31 offline statistics, 4-31
windows heave window, 4-24
pitch, roll and heading window, 4-25 profile window, 4-21 shell, 4-7 sound velocity profile window, 4-23 spreadsheet window, 4-23 survey window, 4-22 tide and draft corrections window, 4-24
Single Beam Test overview, 1-44
SIX files Seabed Statistics, 7-114 Seabed Statistics program, 7-113
snap to line, 6-9 Snell's Law, 9-33 software installation, 1-4 solid TIN models, 6-75, 6-76 sort directory, 1-20 Sort program, 4-37
overview, 1-45, 4-38 procedure, 4-39 statistics, 4-40
sound velocity cast, 9-34 sound velocity corrections, 1-39, 9-35
applying Multibeam Max, 1-44 Single Beam Max, 4-10, 4-13 Survey, 3-4
correcting, 7-70 displaying
Single Beam Max, 4-23, 4-28 Sound Velocity program, 4-5
editing Single Beam Max, 4-11
graphing Sound Velocity program, 4-5, 4-23
importing Sound Velocity program, 4-5
loading Single Beam Max, 4-10, 4-13 Sound Velocity program, 4-4
saving, 4-5, 4-7 Sound Velocity program. See Also sound velocity
corrections corrections table, 4-5 overview, 1-45, 4-4 procedure, 4-4
Sounding Adjustment program overview, 1-45, 7-70 procedure, 7-70
Sounding Reduction program overview, 1-45
sounding selection programs, 1-44, 4-3 comparison, 4-37 Cross Sort, 1-45 Mapper, 1-45 Sort program, 1-45 Sounding Reduction program, 1-45
soundings. See depths, See depths stand alone mode. See GPS:positioning modes standard Hypack volumes calculations, 6-43 starboard offsets. See offsets:Hardware
program:starboard
HYPACK® MAX Manual 3/03 • xxvii
start line gate, 3-3, 3-60, 3-61 starting line, 3-3, 3-60 stations. See navigation stations statistics
calculating Seabed Statistics, 7-119
cross check calculating, 7-122 displaying, 7-123, 7-125 printing, 7-124, 7-125
displaying Seabed Statistics, 7-119
distance surveyed. See reports:show lines report Hyscan
calculating, 5-32 displaying, 5-32
Mapper, 4-47 quality data
survey files, 2-104 target files, 3-35
Seabed Statistics, 7-119 E1 and E2 distribution, 7-118 material statistics, 7-118 seabed ID square to material comparison, 7-118
Single Beam Max, 4-31 file information, 4-31 offline statistics, 4-31
Sort Program, 4-40 Statistics program, 7-122 survey line lengths. See reports:show lines report TIN Model
grid differences, 6-92 TIN differences, 6-92
Statistics program cross check statistics graph, 7-122 cross check statistics report, 7-122 example, 7-125 graph, 7-123 keyboard commands, 7-124 overview, 1-48, 7-122 procedure, 7-122 report file, 7-123 settings
input information, 7-122 view options, 7-123
text report, 7-124 STR files
TIN Model, 6-67 strikes
Mapper, 4-45 subgrade. See overdredge limit supergrade, 6-26, 6-43, 6-44 Survey
color settings, 3-44, See Also Scheme Builder:color settings keyboard commands, 9-6 overview, 3-1 plotting data, 3-63 settings
alarms, 3-4, 3-17, 3-23 area map, 3-13–3-15 boat features, 3-24–3-29 broadcast, 3-24, 3-53
color, 3-7 data display, 3-17–3-19, 3-46 left/right indicator, 3-16–3-17 logging options, 3-5, 3-58, 3-62 matrix files, 3-40, 3-44 navigation parameters, 3-3 network, 3-53 print configuration, 3-65 profile window, 3-19 towfish, 2-126–2-134 window configuration, 3-13
warnings logging over a network, 1-23
windows alarms, 3-12 area map, 3-12, 3-26 data display, 3-12 device windows, 3-12 helm area map, 3-12, 3-26 helm left-right indicator, 3-12 left-right indicator, 3-12 profile window, 3-12, 3-19–3-21, 3-29
survey files-edited. See Also data files correcting
Metric File Converter, 7-79 Single Beam Max, 4-11, 4-13, 4-16 Sounding Adjustment program, 7-70 tide corrections, 4-11
disabling, 1-27 Hypack Max, 1-27 Hyplot Max, 6-2
displaying. See Also survey files-edited:enabling ADCP Profile, 7-104 Seabed Statistics, 7-115, 7-119 Single Beam Max, 4-7, 4-9 Statistics program, 7-123 TIN Model, 6-71
editing Single Beam Max, 4-7
enabling Hypack Max, 1-28 Hyplot Max, 6-2
exporting Hyplot Max, 6-22
loading ADCP Profile, 7-99 Cross Sections and Volumes, 6-25 Cross Sort program, 4-41 Hyplot Max, 6-2 Mapper, 4-44 Pathfinder, 7-82 Remap, 7-80 Seabed Statistics, 7-114, 7-115, 7-119 Single Beam Max, 4-8, 4-9 Sort program, 4-38, 4-39 Statistics program, 7-123
merging All Format files, 1-30 overlaying
Cross Sections and Volumes, 6-25 Seabed Statistics, 7-118
overview, 1-28 plotting
xxviii HYPACK® MAX Manual 1/05
Hyplot Max, 6-7 saving
Manual Entry program, 7-73 Single Beam Max, 4-9
sorting Cross Sort, 4-40, 4-42 Sort program, 4-38
tide corrections, 4-11 unloading, 1-28
Hyplot Max, 6-2 survey files-raw, 3-6, See Also data files, raw format files
content dual frequency (EC2), 2-111 multibeam (SB2), 2-112 multiple transducer (ECM), 2-111 single beam (EC1), 2-111
correcting. See Also sound velocity corrections, tide corrections, draft/squat corrections
heave, pitch and roll corrections, 4-18–4-20 Single Beam Max, 4-11 tide corrections, 4-11
directory structure, 3-6 disabling, 1-27
Hypack Max, 1-27 Hyplot Max, 6-2
displaying. See Also survey files-raw:enabling Echosounder Display, 3-54 Hypack Max, 1-27, 4-1 Memory Viewer, 3-49 NMEA Output, 3-55 Seabed Statistics, 7-115, 7-119 Single Beam Max, 4-7, 4-9 Survey, 3-13, 3-19, 3-22, 3-39
editing overview, 4-3 Single Beam Max, 4-7
enabling, 1-28 Hyplot Max, 6-2
exporting NMEA Output, 3-55 Shared Memory Output, 3-50
loading Hypack Max, 1-27, 4-1 Hyplot Max, 6-2 Hyscan, 5-21, 5-31 Seabed Statistics, 7-115, 7-119 Single Beam Max, 4-8, 4-9
logging Side Scan Survey, 5-6, 5-15, 5-16, 5-21 Survey, 2-108, 3-6–3-7, 3-58, 3-62–3-63
naming, 3-6 overlaying
Seabed Statistics, 7-118 overview, 1-28 playback
Side Scan Survey, 5-6, 5-18 plotting, 3-63 POS data, 2-104 printing
Survey, 3-65 QUA data, 2-104 quality data, 2-104
RAW data, 2-104 saving
Compress Project, 4-3 Dredgepack, 8-13 Survey, 3-7, 3-40 to matrix, 3-45, 8-17 to XYZ format, 3-45, 8-17
simulator Side Scan Survey, 5-18
tide corrections, 4-11 unloading, 1-28, 4-1
Hyplot Max, 6-2 survey files-sorted. See Also data files, all format-sorted,
XYZ files clipping
Hypack Max, 4-36 TIN Model, 6-82
correcting Metric File Converter, 7-79
disabling, 1-27 Hypack Max, 1-27 Hyplot Max, 6-2
displaying. See Also survey files-sorted:enabling:Hypack Max
ADCP Profile, 7-104 Mapper, 4-44 TIN Model, 6-71
enabling Hypack Max, 1-28 Hyplot Max, 6-2
exporting Hyplot Max, 6-22
loading Cross Sections and Volumes, 6-25 Hyplot Max, 6-2 Remap, 7-80 Seabed Statistics, 7-114 TIN Model, 6-68
merging All Format files, 1-30 overview, 1-29 plotting
Hyplot Max, 6-7 saving
Cross Sort, 4-42 Mapper, 4-44 Sort program, 4-38, 4-40
unloading, 1-28 Hyplot Max, 6-2
survey line files. See LNW files, survey lines survey lines
appending files, 2-55 clipping
3D Terrain Viewer, 7-153 Line Editor, 2-57–2-59
creating Channel Design, 2-39 Channel Design Max, 2-62 Export to Line File program, 2-76 Line Editor, 2-41, 2-42–2-53 overview, 2-38 Pathfinder, 7-82 Survey, 3-39
HYPACK® MAX Manual 3/03 • xxix
curved lines, 2-39 displaying
3D Terrain Viewer, 7-151 ADCP Profile, 7-104 Channel Design Max, 2-73 Dredgepack, 8-2 Hypack Max, 2-146, 2-148, 2-152 Line Editor, 2-45, 2-48, 2-60 Side Scan Survey, 5-11 Single Beam Max, 4-22 Survey, 3-12, 3-13, 3-24 TIN Model program, 6-72, 6-76
editing Channel Design Max, 2-63, 2-64, 2-65, 2-72 Line Editor, 2-45, 2-49 Pathfinder, 7-83
exporting Hyplot Max, 6-22
labeling 3D Terrain Viewer, 7-151 Channel Design Max, 2-71 Export to Line File, 2-77 Hyplot Max, 6-10, 6-22 Line Editor, 2-43
left-right indicator, 3-16 loading
3D Terrain Viewer, 7-151 Advanced Channel Design, 7-46 Channel Design Max, 2-63 Cross Sections and Volumes, 6-27 Hypack Max, 2-146, 2-148, 2-152 Line Editor, 2-49 Remap, 7-80 TIN Model, 6-79
multisegment lines, 3-5, 3-62 naming
Channel Design Max, 2-63, 2-71 DXF to LNW conversion, 2-78 Line Editor, 2-44
navigating, 3-58 offsets, 2-42–2-53
centerline, 2-41 extend tab, 2-49 parallel, 2-40 radial, 2-40 search, 2-41 stairstep, 2-41
overview, 2-39 plotting
Hyplot Max, 6-22 Survey, 3-65
previewing Channel Design Max, 2-73 Line Editor, 2-43, 2-45, 2-46, 2-48, 2-55, 2-60
saving, 1-39 Channel Design Max, 2-63 Export to Line File, 2-77 Line Editor, 2-44, 2-46, 2-48, 2-57
selecting-Survey, 3-4, 3-5, 3-58, 3-62 settings
3D Terrain Viewer, 7-151 automatic leg switching, 3-5, 3-62
labels, 3-65, 6-10, 6-22 line extension, 2-70 line increment, 3-4 lines at center turn, 2-72 lines at channel beg/end, 2-72 next line, 3-4, 3-61 search distance, 2-70 smart corners, 2-72 spacing, 2-71
show lines report, 1-39 spacing
Channel Design Max, 2-71 Line Editor, 2-40
turning basins, 2-39, 2-66 survey preparation, 3-1 survey units. See geodetic parameters:distance units swap depths
Single Beam Max, 4-33, 4-34 SWP files. See Also survey files-raw, data files
definition, 1-29, 9-3, 9-4 Export program, 6-104
symbols. See Also chart features, boat shapes boat, 2-131, 3-27 Chart program, 7-61 chart symbols, 7-67 DGW Editor, 7-68 Metadata program, 7-76 Shore Manual program, 7-67
synchronize clock, 2-103, 2-106 T0 pulse, 2-140 Target Editor
overview, 1-42, 2-146 procedure, 2-146
target files. See Also targets appending
Target Editor, 2-148 creating
Hyscan, 5-26 Side Scan Survey, 5-17, 5-18 Survey, 3-32, 3-63 Target Editor, 2-146
displaying Hyscan, 5-26 Side Scan Survey, 5-18 Survey, 3-13, 3-33, 3-34, 3-36, 3-37
editing Side Scan Survey, 5-18 Survey, 3-37 Target Editor, 2-147
loading Side Scan Survey, 5-17 Survey, 3-37 Target Editor, 2-147
naming Hyscan, 5-26 Side Scan Survey, 5-17 Survey, 3-32, 3-33, 3-34, 3-63 Target Editor, 2-147
overriding default path, 3-33 overview, 1-40 quality data, 3-35 saving
xxx HYPACK® MAX Manual 1/05
Hyscan, 5-26 Survey, 3-33 Target Editor, 2-147, 2-148
unloading Survey, 3-37
warnings target overwriting, 5-26
targets. See Also target files creating. See targets:marking deleting, 2-148, 3-37 displaying, 3-34
3D Terrain Viewer, 7-158 Hyscan, 5-26 Side Scan Survey, 5-18 Survey, 3-33, 3-34, 3-36, 3-37
exporting Export, 6-111 Hyplot Max, 6-23
labeling Export, 6-111 Hyscan, 5-26 Target Editor, 2-147
marking Side Scan Survey, 5-18 Survey, 3-38, 3-63 Target Editor, 2-146, 2-147
positions Side Scan Survey, 5-17, 5-18 Survey, 3-34, 3-36, 3-37, 3-38, 3-39 Target Editor, 2-147 target properties, 5-18
quick mark Side Scan Survey, 5-18 Survey, 3-33
saving Hyscan, 5-26 Target Editor, 2-147
selecting Side Scan Survey, 5-17 Survey, 3-34, 3-37
settings circles, 3-36, 6-111 display defaults, 3-36 distance and bearing, 3-34 events at targets, 3-36 labels, 3-36, 6-111 target properties, 3-34, 5-18
water's edge, 3-38 TDX files
definition, 9-3 Manual Tides program, 7-7, 7-9
telemetry tide gauges, 2-124, 3-46 template files
3D Shape Editor, 7-24 TGT files. See Also target files, targets
3D Terrain Viewer, 7-158 definition, 9-3 Export, 6-104 Hyscan, 5-26 Side Scan Survey, 5-17 Survey, 3-32 Target Editor, 2-146
TID files. See Also tide files, tide corrections definition, 9-3 Harmonic Tides program, 3-47, 7-2, 7-3 Manual Tides program, 3-47, 7-6, 7-7, 7-9 Multibeam Max, 2-124 Single Beam Max, 2-124, 4-8, 4-13 Single Beam Max, 4-12 Survey, 2-124
tide corrections applying
Multibeam Max, 1-44 Single Beam Max, 1-44, 4-8, 4-10, 4-11, 4-15 Survey, 3-46, 3-47, 3-45–3-47
displaying Dredgepack, 8-7 Single Beam Max, 4-24, 4-28
editing Single Beam Max, 4-11
exporting Export, 6-115
Harmonic Tides program example, 7-3 overview, 1-45, 7-2 procedure, 7-2
inverting Manual Tides, 7-9 Single Beam Max, 7-17
manual entry, 3-46, 7-2 Manual Tides program
example, 7-5, 7-7 high-low water times and heights, 7-5 importing NOAA historical tide data, 7-8 linear method, 7-7 manual observations, 7-6 overview, 1-45 procedure, 7-6 spline method, 7-7
merging with heave, 4-19 NOAA tide book, 7-5 overview, 7-1 predicted. See tide corrections:Harmonic Tides, tide
corrections:Manual Tides, device drivers:tidefile.dll RTK (Real Time Kinematic) tide corrections
alarm, 2-108, 3-23, 8-9 filtering, 2-107 GPS status codes, 2-108 overview, 3-47, 7-9 settings, 2-107, 4-15, 4-18, 4-19, 7-9–7-17 with KTD file, 7-10 without KTD file, 7-10
RTK tide corrections warning, 2-107, 2-109
Survey, 3-45–3-47 telemetry tide gauges, 2-124, 3-46, 7-2 tide adjustments, 1-45
Single Beam Max, 4-12 tidefile device driver, 3-47 warning
calculating in non-kinematic mode, 2-107 tide files
editing Manual Tides, 7-9
HYPACK® MAX Manual 3/03 • xxxi
graphing Harmonic Tides program, 7-3, 7-4 Hypack Max, 7-1 Manual Tides program, 7-6, 7-7
overview, 1-40, 7-1 saving
Harmonic Tides program, 7-3, 7-4 Manual Tides program, 7-5, 7-7, 7-9
selecting Single Beam Max, 4-8, 4-10, 4-11, 4-13 Survey, 3-47
tide stations, 7-9, 7-14 tidefile.dll. See device drivers:tidefile.dll TIF files, 1-37
3D Terrain Viewer, 7-168 exporting
Hyscan, 5-31 TIN Model program, 6-88
Hyscan, 5-20, 5-30 Side Scan Survey, 5-9 TIN Model program, 6-88
time displaying
Memory Viewer, 3-49 Side Scan Survey, 5-8, 5-19 Single Beam Max, 4-28 Survey, 3-17
exporting Export, 6-115
time tags applying
1PPS pulse, 2-100 comparison of methods, 2-100 fixed latency, 2-100, 2-103 synch. clock with ZDA, 2-82, 2-103, 2-106 ZDA and synch. clock, 2-100
calculating depth position, 9-37 correcting, 7-72
Data Adjustments program, 2-145 TIN files
definition, 9-3 TIN Model program, 6-67, 6-68
TIN Model program clipping survey files, 6-82 examples
cutting sections, 6-79 TIN to Channel volumes calculation, 6-99 TIN to level volumes calculation, 6-101 TIN to TIN volumes calculation, 6-102
exporting all format files, 6-78, 6-89 contours, 6-85 DXF files, 6-85 grid differences, 6-92, 6-93 matrix files, 6-89 TIF files, 6-88 TIN differences, 6-92, 6-93
measuring distance and position, 6-78 overview, 1-46, 6-67 procedures
calculating volumes, 6-94, 6-96 cutting sections, 6-78
exporting all format files, 6-89 exporting DXF files, 6-85 exporting matrix files, 6-89 exporting TIF files, 6-88
reports displaying, 6-93 printing, 6-93
settings color, 6-73 initial data, 6-68 legend, 6-72 Philadelphia method, 6-95 saving, 6-68 shades, 6-73 smooth contours, 6-86 view options, 6-71 views, 6-74–6-78 volumes calculation control, 6-95
smoothing contours, 6-91 volumes calculations
advantages, 6-98 changing calculation mode, 6-95 disadvantages, 6-99 procedure, 6-94, 6-96 TIN to channel, 6-68 TIN to level, 6-68 TIN to TIN, 6-68
TIN models 2D sections, 6-76 2D TIN, 6-74 3D sections, 6-76 3D TIN, 6-74 clipping, 6-82 contour TIN, 6-75 cutting sections, 6-78 displaying
3D Terrain Viewer, 7-137 TIN Model program, 6-67, 6-71
polysection TIN, 6-77 printing, 6-93 saving, 6-67 solid TIN, 6-75, 6-76 view options, 6-71
Title Block Editor overview, 6-13 procedure, 6-13 settings, 6-13–6-15
title blocks creating
Hyplot Max, 6-11 Title Block Editor, 6-13
displaying Hyplot Max, 6-11
TMP files. See Also channel templates, Cross Sections and Volumes:Template Editor
Cross Sections and Volumes, 6-28, 6-40 definition, 9-3
toe lines Channel Condition Reporter, 7-129 Channel Design Max, 2-62, 2-63 importing
Channel Design Max, 2-64
xxxii HYPACK® MAX Manual 1/05
toe points Channel Design Max, 2-62, 2-63, 2-67 Cross Sections and Volumes, 6-34 importing
Channel Design Max, 2-64 top of bank
Channel Design, 2-65 Channel Design Max, 2-68
towfish. See Also boat shapes altitudes
Hyscan, 5-24, 5-26, 5-27, 5-28 Side Scan Survey, 5-8
altitudess Side Scan Survey, 5-8
color settings, 2-132 data display, 2-132 settings
Hardware, 2-127–2-131 LBL systems, 2-136 main vessel, 2-133, 3-29, 3-30 Survey, 2-131, 2-126–2-134
shapes, 2-131 symbols, 2-131 warning-offsets, 2-129, 2-135, 2-136
towfish altitudes calculating
Hyscan, 5-9 creating
Hyscan, 5-28 default, 5-13, 5-24
Hyscan, 5-29 defining
Hyscan, 5-26 digitizing
Hyscan, 5-28 displaying
Hyscan, 5-8, 5-9 Side Scan Survey, 5-13
measuring Hyscan, 5-24
smoothing Hyscan, 5-27
TPL files. See Also channel templates, Cross Sections and Volumes:Template Editor
Cross Sections and Volumes, 6-28, 6-40 Survey, 3-20, 8-4
tracklines displaying
Pathfinder program, 7-82 Single Beam Max, 1-44, 4-22 Survey, 3-19–3-21
editing Single Beam Max, 1-44
exporting Export program, 6-112 Hyplot Max, 6-23 Pathfinder program, 7-82
labeling Export program, 6-112 Hypack Max, 1-15
plotting Survey, 3-65
previewing Pathfinder, 7-82
Survey, 3-27 Trackpoint systems, 2-134, 2-135 Transducer Offsets program
overview, 1-42, 2-93 procedure, 2-93 settings
latency, 2-93 offsets-multiple transducer, 2-93
transverse mercator projections. See projections:transverse mercator
traverse calculation dialog, 2-35, See Traverse program Traverse program
overview, 1-47, 2-25, 2-35 printing screen, 2-35 procedure, 2-35
truncation Hypack Max, 1-14 Hyplot Max, 6-9
turning basins Channel Condition Reporter, 7-129 Channel Design Max, 2-63, 2-66
basin level, 2-68 multiple basins, 2-68 side slopes, 2-68 simple basin, 2-66
creating Channel Design Max, 2-66
curved basin lines, 2-69 definition, 2-62, 2-66 settings
Channel Condition Reporter, 7-130 U.S. Army Corps. of Engineers Coordinate Conversion
program. See geodetic parameters:Use Corpscon Unit Conversion program
overview, 1-47 printing screen, 2-36
units conversion Metric File Converter, 7-79
update frequency, 2-79, 2-81 User-Defined Output. See Export program:settings:user-
defined output UTC time, 2-100
NMEA GGA string, 2-81, 2-100, 2-103, 2-106 synch. clock with ZDA, 2-81, 2-103, 2-106 ZDA and synch. clock, 2-100
vectors ADCP to DXF, 7-110 Survey, 3-27
VEL files. See Also Sound Velocity program, sound velocity corrections
definition, 9-3 Single Beam Max, 4-13 Sound Velocity program, 1-39
vertical scale 3D Shape Editor, 7-37 3D Terrain Viewer, 7-55, 7-141, 7-148
VES files 3D Shape Editor, 7-45 3D Terrain Viewer, 7-154 definition, 9-3
HYPACK® MAX Manual 3/03 • xxxiii
exporting 3D Shape Editor, 7-45
importing 3D Terrain Viewer, 7-154
vessels. See boat shapes, towfish video splitters, 2-115, 2-116 virtual screens, 2-115–2-116, 3-24 VOL files
Cross Sections and Volumes, 6-39 definition, 9-3
volumes calculations Cross Sections and Volumes, 6-38
end area 1 method, 6-44 end area 2 method, 6-45 end area 3 method, 6-46 End Area methods, 6-40 method comparison, 6-40 Philadelphia Methods, 6-49 reach volumes, 6-63 Savannah method, 6-47 standard Hypack method, 6-43 warning, 6-42
Dredgepack estimates, 8-21 TIN Model program, 6-94, 6-96
advantages, 6-98 changing calculation mode, 6-95 disadvantages, 6-99 Philadelphia method, 6-67, 6-95 TIN to channel, 6-68 TIN to level, 6-68 TIN to TIN, 6-68
volumes reports Cross Sections and Volumes program, 6-38
cross sections graphs, 6-37 printing
Cross Sections and Volumes, 6-39 TIN Model program, 6-93
saving Cross Sections and Volumes, 6-39 TIN Model program, 6-94
TIN Model program, 6-93 VPF (Vector Product Format) charts
loading Hypack Max, 2-5
Survey, 3-32 warnings. See Also alarms
Advanced Channel Design nonconvex shape error, 7-50 non-flat face error, 7-50 orientation error, 7-50
ARCS charts permit and license coordination, 2-2
average end area and nonparallel survey lines, 6-42 calculating in non-kinematic mode, 2-107 Dredgepack
save only strikes in elevation mode, 8-14 Export to Line, 2-78 Hardware
echosounder calibration, 2-114, 9-40 ellipsoid height vs mean sea level, 2-99 GPS position accuracy, 2-99 mobile offsets, 2-129, 2-135, 2-136
RTK alarms and DGPS systems, 2-109 update frequency affects sync. clock accuracy, 2-82, 2-
106 Hypack Max
ARCS charts, 2-2 overwriting data, 1-25 overwriting files, 1-23
Hyscan target overwriting, 5-26
Matrix Editor editing filled matrix files, 2-156
Seabed Statistics data inclusion, 7-117
Survey logging over a network, 1-23
water column removing. See Also tide corrections
Hyscan, 5-27, 5-29 water's edge, 3-38 Window Viewer
overview, 3-24 procedure, 3-25 settings, 3-25
XTF files Hyscan, 5-19 Side Scan Survey, 5-16
XYZ Collector overview, 1-42, 7-69 procedure, 7-69
XYZ files Merge XYZ, 7-83
XYZ format, 1-29 3D Terrain Viewer, 7-138 Advanced Channel Design, 7-46 Channel Condition Reporter, 7-133, 7-135 definition, 9-4 Dredgepack, 8-13 Export program, 6-105, 6-113 Hyscan, 5-29 Mapper, 4-37, 4-38 Remap, 7-79 Sort program, 4-38–4-40 TIN Model, 6-67, 6-94 TIN Model program, 6-67 XYZ Collector, 7-69 XYZ to MTX program, 1-48, 2-154, 8-10
XYZ to MTX program, 1-48 overview, 2-154 procedure, 8-10
yaw (camera) camera controls
3DTV, 7-165 yaw (devices)
correcting data Data Adjustments program, 7-72 Multibeam Max, 2-146
definition, 2-92 displaying
Multibeam Max, 2-146 Single Beam Max, 4-15
editing Multibeam Max, 2-146
xxxiv HYPACK® MAX Manual 1/05
Single Beam Max, 4-15 offsets
Hardware, 2-79 yaw (vessel). See heading ZDA message, 2-82, 2-100, 2-103, 2-106 zip files. See Compress Project
zones C-Maps, 2-6 geodetic parameters, 2-19
Z-scale. See vertical scale, See vertical scale Z-values. See depths
Recommended