View
1
Download
0
Category
Preview:
Citation preview
HDMI HDMI HDMI HDMI OverOverOverOver Single Coax Single Coax Single Coax Single Coax ExtenderExtenderExtenderExtender
HDMIECOAX
User Manual
TransmitterTransmitterTransmitterTransmitter
ReceiverReceiverReceiverReceiver
ASKING FOR ASSISTANCEASKING FOR ASSISTANCEASKING FOR ASSISTANCEASKING FOR ASSISTANCE
Technical Support：
Telephone +44 (0) 1675 465487
Fax +44 (0) 1675 463478
Technical Support Hours：
8.30 AM to 4.30 PM Monday - Friday.
Write To：
Antiference Ltd
Unit 100 Fradley Distribution Park, Wood End Lane
Fradley Park, Lichfield, Staffordshire, WS13 8NE
http://www.antiference.co.uk
sales@antiference.co.uk
Notice Antiference Ltd . reserves the right to make changes in the hard ware,
packaging and any accompanying documentation without prior written
notice.
CONTENTSCONTENTSCONTENTSCONTENTS
1 Introduction
2 Features
3 Transmitter Unit Panel Layout
4 Transmitter Unit Panel Descriptions
5 Receiver Unit Panel Layout
6 Receiver Unit Panel Descriptions
7 Connecting and Operating the HDMI Over Coax Extender
8 Specifications
9 Warranty
10 Compliance
INTRODUCTIONINTRODUCTIONINTRODUCTIONINTRODUCTION
The HDMIECOAX HDMI Over Single Coax Extender
The HDMIECOAX HDMI Over Single Coax Extender sends HDMI
signals Over just one 75Ohm Coaxial cable -- up to 400 feet away. The
HDMIECOAX HDMI Over Single Coax Extender supports HDMI 1.2 and
the newer HDMI 1.3 with features such as Deep Color and 1080p. DVI-D
Computer video can also be transmitted with a DVI-to-HDMI cable
By using standard and widely available 75Ohm RG-6U cables, the
HDMIECOAX HDMI Over Single Coax Extender makes HDMI signal
extensions easier than with heavy and expensive copper cables and more
robust than with optical fiber.
How it connects
The HDMIECOAX HDMI Over Single Coax Extender system consists of a
Transmitter and a Receiver. The HDMI source (set-top box, Bluray player,
or gaming console) connects to the Transmitter box with a 6-foot HDMI
cable. The Receiver box connects to the HDTV display in the same way --
up to 400 feet away. One 75Ohm RG-6U Coax cables link the Transmitter
and Receiver. Power is applied to the Transmitter and Receiver with the
included 5V DC power supplies. HDMI picture emerges on the HDTV
display.
Note：The HDMIECOAX HDMI Over Single Coax Extender is HDCP compliant.
FEATURESFEATURESFEATURESFEATURES
Features
� Flexible extension of high-bandwidth HDMI 1.3 thanks to the performance and reliability of 75Ohm RG-6U Coax cable.
� Audio and video are transmitted digitally over the 75Ohm RG-6U Coax cable for zero signal loss.
� Single Link Range: 1080p/60, 8 bit color depth, 1920x1200. � Compliant with HDMI 1.3, HDCP 1.2 and DVI1.1 standards � Supports digital video formats in Deep Color Mode. � Supports 5.1/7.1 Ch. Surround Sound / Digital Audio / DTS-HD � Supports Cascade function in Receiver and easy to build a network
system by installer.
� Lip-Sync Pass Through � Supports IR Pass thru function and control HDMI source devices
(set-top box, DVD player and Blue ray DVD Player) in Receiver by its
IR remote controller.
Package Includes
(1)HDMIECOAX-TX HDMI Over Single Coax Transmitter
(2)HDMIECOAX-RX HDMI Over Single Coax Receiver
(3)2 x 5V DC Power Supply
(4)BNC Cap x 1
(5)User Manual
Optional Items
If you need the following items, please talk with us and we will quote for
you.
(1) IR Emitter Cable (2) IR Extender Cable (3) HDMI Cable (3 feet / 6 feet / 10 feet) (4) Mounted Ear & Screws
TRANSMITTERTRANSMITTERTRANSMITTERTRANSMITTER UNIT PANEL LAYOUTUNIT PANEL LAYOUTUNIT PANEL LAYOUTUNIT PANEL LAYOUT
Front PanelFront PanelFront PanelFront Panel
HDMI InputHDMI InputHDMI InputHDMI Input Power LEDPower LEDPower LEDPower LED
Back PanelBack PanelBack PanelBack Panel
DCDCDCDC 5555VVVV IR Emitter IR Emitter IR Emitter IR Emitter Output PortOutput PortOutput PortOutput Port
Power InputPower InputPower InputPower Input
TRANSMITTERTRANSMITTERTRANSMITTERTRANSMITTER UNIT PANEL DESCRIPTIONSUNIT PANEL DESCRIPTIONSUNIT PANEL DESCRIPTIONSUNIT PANEL DESCRIPTIONS
1 HDMI Input
Connect the HDMI cable between HDMI output port of source device
and this HDMI Input port.
2 Power LED
This LED indicator will activate once the included 5V DC power
adapter has been properly connected between the Transmitter unit and
an open wall power socket.
3 DC5V Power Input
Connect the included 5V1A DC power supply to this input port. 4 IR Emitter
Connect a IR Emitter Cable to this IR port and stick IR emitter
module on the IR receiver zone of HDMI source (set-top box, DVD
player and Blue ray DVD Player).
5 Output Port
Connect 75Ohm RG-6U Coax cables between this output port and the
Coax BNC input port of the Receiver unit.
RECEIVER UNIT PANEL LAYOUTRECEIVER UNIT PANEL LAYOUTRECEIVER UNIT PANEL LAYOUTRECEIVER UNIT PANEL LAYOUT
Front PanelFront PanelFront PanelFront Panel
IR Extender IR Extender IR Extender IR Extender HDMI OutputHDMI OutputHDMI OutputHDMI Output IRIRIRIR Power LEDPower LEDPower LEDPower LED
Back PanelBack PanelBack PanelBack Panel
DCDCDCDC 5555VVVV InInInInput Portput Portput Portput Port Output PortOutput PortOutput PortOutput Port
Power InputPower InputPower InputPower Input
RECEIVER UNIT PANEL DESCRIPTIONSRECEIVER UNIT PANEL DESCRIPTIONSRECEIVER UNIT PANEL DESCRIPTIONSRECEIVER UNIT PANEL DESCRIPTIONS
1. Power LED
This LED indicator will activate once the included 5V DC power
adapter has bee properly connected between the Receiver unit and an
open wall power socket.
2. IR Once IR emitter cable has been connected between Transmitter and the source device, the source device can be controlled in the Receiver end by its IR remote controller.
3. HDMI Output
Connect the HDMI cable between HDMI input port of HDTV display
and HDMI output port of Receiver unit.
4. IR Extender
Please connect IR emitter cable between Transmitter unit and source device. Then please connect IR Extender cable to this port Then, IR signal can be extended and the user can control the source device from IR Receiver Module of IR extender cable. Please note once IR extend cable has been connected, the IR on the Receiver unit won’t have function.
5. DC5V Power input
Connect the included 5V DC power supply to this input port.
6. Input port
Connect a 75Ohm RG-6U Coax cable between this input port and the
output port on the Transmitter unit.
7. Output Port
Connect a 75Ohm RG-6U Coax cable between this output port and the
input port on the extra Receiver unit. If it doesn’t connect an extra
Receiver unit, please plug provided BNC cap to this port.
CONNECTING AND OPERATING CONNECTING AND OPERATING CONNECTING AND OPERATING CONNECTING AND OPERATING How to Connect the HDMIECOAX HDMI Over SINGLE COAX Extender
One source to One display functionOne source to One display functionOne source to One display functionOne source to One display function
1. Connect one HDMI cable between HDMI output port of source device
and HDMI input port of Transmitter unit.
2. Connect one 75Ohm RG-6U Coax cable between the Coax BNC output
port of Transmitter unit and Coax BNC input port of Receiver unit.
3. Connect one HDMI cable between HDMI input port of HDTV display
and HDMI output port of Receiver unit.
4. Connect the included 5V DC power supplies to both Transmitter and
Receiver units.
5. Power on the output device firstly and the source device secondly.
Please refer the following diagram
CONNECTING AND OPERATINGCONNECTING AND OPERATINGCONNECTING AND OPERATINGCONNECTING AND OPERATING How to Connect the HDMIECOAX HDMI Over SINGLE COAX Extender
One source to many displays functionOne source to many displays functionOne source to many displays functionOne source to many displays function
1. Connect one HDMI cable between HDMI output port of source device
and HDMI input port of Transmitter unit.
2. Connect one 75Ohm RG-6U Coax cable between Coax BNC output port
of Transmitter and Coax BNC input port of Receiver 1.
3. Connect one 75Ohm RG-6U Coax cable between Coax BNC output port
of Receiver 1 and Coax BNC input port of Receiver 2.
4. Connect the HDMI input port of HDTV display to the HDMI output
ports of Receiver 1 & 2 with HDMI cables.
5. Connect the included 5V DC power supplies to the Transmitter and
Receiver 1 & 2 units.
6. Power on the output devices firstly and the source secondly.
Note. If Receiver doesn’t connect extra Receiver, please plug provided BNC
cap.
Please refer the following diagram
SPECIFICATIONSSPECIFICATIONSSPECIFICATIONSSPECIFICATIONS
PERFORMANCE
HDTV Resolutions 720p, 1080i, 1080p
Video Bandwidth 3Gbps
Input Video Signal 1.2 Volts P-P
Input DDC Signal 5.0 Volts P-P
I/O CONNECTORS
Transmitter
Inputs 1 BNC Jack – Output Port
Outputs 1 HDMI 19PIN Connector
1 3.5mm Jack-IR Emitter
Receiver
Inputs 1 BNC Jack – Output Port
1 BNC Jack – Input Port
Outputs 1 HDMI 19PIN Connector
1 3.5mm Jack-IR Extender
MECHNICAL
Transmitter
Dimensions (H-W-D) 98.5x92.3x28mm
Weight 0.3kg
Receiver
Dimensions (H-W-D) 98.5x92.3x28mm
Weight 0.3kg
WARRANTY
Limited Warranty 1 Year Parts and Labor
ENVIRONMENTAL
Operating Temperature +0 to +40° C (+32° to 104° F)
Operating Humidity 10% to 85% (Non-condensing)
Storage Temperature -20° to +60° (+20° to +140° F)
Storage Humidity 10% to 85% (Non-condensing)
REMOTE CONTROL
Infrared IR Remote (Front )
POWER REQUIREMENTS
External Power Supply 5VDC@1A
Power Consumption 5 Watts (Max.)
SAFETY
Certificate FCC, CE, RoHS
Power Adapter UL, CE, CSA, CEC, RoHS
ACCESSORIES
AC Power Adapter X 1 US, UK or Euro Type
Sender Instruction Manual X 1
WARRANTYWARRANTYWARRANTYWARRANTY
LIMITED WARRANTY – With the exceptions noted in the next paragraph,
Antiference warrants the original purchaser that the equipment it
manufactures or sells will be free from defects in materials and
workmanship for a period of one year from the date of purchase. Should
this product, in Antiference’s opinion, prove defective within this warranty
period, Antiference, at its option, will repair or replace this product without
charge. Any defective parts replaced become the property of Antiference.
This warranty does not apply to those products which have been damaged
due to accident, unauthorized alterations, improper repair, modifications,
inadequate maintenance and care, or use in any manner for which the
product was not originally intended.
Items integrated into Antiference products that are made by other
manufacturers, notably computer hard drives and liquid crystal display
panels, are limited to the term of the warranty offered by the respective
manufacturers. Such specific warranties are available upon request to
Antiference.
Antiference makes no other representation of warranty as to fitness for the
purpose or merchantability or otherwise in respect of any of the products
sold. The liability of Antiference with respect to any defective products
will be limited to the repair or replacement of such products. In no event
shall Antiference be responsible or liable for any damage arising from the
use of such defective products whether such damages be direct, indirect,
consequential or otherwise, and whether such damages are incurred by the
reseller, end-user or any third party.
COMPLIANCECOMPLIANCECOMPLIANCECOMPLIANCE
The HDMIECOAX HDMI Over Single Coax Extender have been tested for
compliance with appropriate FCC and CE rules and regulations and are also
RoHS compliant.
The Power Adapter has been tested for compliance with UL, CE and CSA
rules and regulations and are also RoHS compliant.
Recommended