View
225
Download
2
Category
Preview:
Citation preview
PROFILPAS S.P.A.
VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA)
ITALY
TEL. +39 (0)49 8878411 +39 (0)49 8878412
FAX. +39 (0)49 - 706692
EMAIL: INFO@PROFILPAS.COM
Profiles for wooden and laminate floors
Unisystem® Plus - Unisystem®
Application
UNISYSTEM® PLUS and UNISYSTEM® are two professional systems for laying floating wood and laminated floors, which also permits its necessaryexpansion.
Both systems comprise a base profile in natural aluminum and a top having various functions:
cover trims for equal levels;• profiles for different levels, permitting thickness compensation between flooring that is not flush;• terminal profiles, which delimit flooring in parquet or laminates;• perimeter profiles, used to connect flooring to wall coverings;• step nosing profiles for stairs.•
UNISYSTEM® PLUS, evolved from the UNISYSTEM® system, distinguishes itself in its use of special Teflon dowels that allow for a quicker laying ofthe top profile and thus its possible removal for reorganization and/or maintenance of the floor.
Both systems feature: simplicity in their laying out, limited thickness of the top profile, dimensional stability, use for floorings of thicknesses between 6.5to 22.6mm (UNISYSTEM® PLUS) and from 6.5 to 15mm (UNISYSTEM®), available in a variety of decors (4 anodized finishes, 28 wooden decors, 8real wood decors).
For both systems the "base" profiles are fixed to the foundation through the use of screws and dowels or with the proper adhesive (such as PP/86).
Materials
Natural aluminumAl-Mg-Si Alloy heat treated to T6 temper (6060 T6)These profiles are made by extrusion and guarantee a distinct resistance to chemical and atmospheric agents. Wet cement and its derivatives producealkaline substances that, when left to act on the surface, can corrode metal (formation of aluminum hydroxide). For this reason, the visual surface ofthe profile must be cleaned thoroughly of cements, adhesives and caulking or stopping material.Anodized aluminumAl-Mg-Si Alloy heat treated to T6 temper (6060 T6)These profiles are made by extrusion and subsequently anodized. They are well-resistant to chemical and atmospheric agents. Wet cement and itsderivatives produce alkaline substances that, when left to act on the surface, can corrode metal (formation of aluminum hydroxide). For this reason, thevisual surface of the profile must be cleaned thoroughly of cements, adhesives and caulking or stopping material. As a result of wear and treading(when these profiles are used on flooring), anodized surfaces wear down, losing their original finish.High shine aluminumAl-Mg-Si Alloy heat treated to T6 temper (6463 T6)These profiles are made by extrusion and subsequently treated and mechanically worked.They guarantee a discernible resistance to chemical andatmospheric agents. Wet cement and its derivatives produce alkaline substances that, when left to act on the surface, can corrode metal (formation ofaluminum hydroxide). For this reason, the visual surface of the profile must be cleaned thoroughly of cements, adhesives and caulking or stoppingmaterial.Do not use profiles in high shine aluminum on floors.Coated aluminum - Alcrom® PlusAl-Mg-Si Alloy heat treated to T6 temper (6060 T6)These profiles are made by extrusion in natural alloy. The coating is obtained through the use of an Alcrom® Plus film covering, which is resistant towear and tear and which replicates the diverse tonalities and/or finishes of wood.Aluminum coated with shears of Real WoodAl-Mg-Si Alloy heat treated to T6 temper (6060 T6)These profiles are made by extrusion in natural alloy. The finish is obtained by the use of slices of real wood of different species. Real Wood profiles
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 1/28
coated following a natural process of oxidation, when applied or even simply exposed to light, become darker. Thus it is recommended to leave theprofiles in their packaging until ready to use.
General note on metalsAluminium is not resistant to all chemical compounds and it would thus be necessary to keep it away from particularly aggressive products such ashydrochloric acid (HCl) and phosphoric acid (H3PO4)
Products that can be used for cleaning stones, ceramics and gres, namely muriatic acid, ammonia, bleach or sodium hypochlorite damage the surfacefinish of the metal and may cause intense corrosive reactions. Therefore, it is necessary to always remove, and as fast and gently as possible, residuesof cement, adhesives and materials for caulking and stopping from the surface of profiles.
Laying
Laying instructions for the Unisystem® Plus systemTake the profiles out of the packaging.Check that the thickness of the covering or flooring to be laid corresponds with the height of the selected profile (see the label).Remove, wherever present, the protection (protective and/or thermo-shrink film) of the profile’s finish.Measure and cut the base profile to the required length with the proper tools.
The base profile can be laid to the floor by:
Use of the adequate adhesive (such as PP/86); in this case, lay the profile, leaving sufficient space to insert the flooring to be laid and for itsexpansion (about 10mm); after making sure that the laying surface for the base is perfectly clean, press the profile so that the previouslyapplied adhesive comes out from the perforations of the tabs.
•
Use of screws and dowels; in which case: place the base profile, already cut to measure, in the correct position and, with indelible ink, markthe exact position of the holes of the base profile where drilling is necessary.Remove the base profile and drill into the floor in the exact positions marked in the previous step, careful to verify the exact dimensions of thedowels to be used.Clean the laying are completely and insert the dowels into the holes in the floor; reposition the profile into the correct position, mindful of theexpansion of the floor to be laid (about 10mm), and fix it to the floor with adequate screws.Measure and cut the top profile to the necessary length.Apply the Teflon dowels to the guide underneath the top profile every 15 - 20cm.Position the corresponding top profile on the base profile (already fixed to the floor); carefully using a hammer (placing a wooden wedgebetween the top profile and the hammer to prevent damage), until it is fully inserted into the base profile.
•
Unisystem® Plus - Junction
Unisystem® Plus - Edge
Unisystem® Plus - Stair Nosing
Laying instructions for the Unisystem® systemTake the profiles out of the packaging.Check that the thickness of the floor covering to be laid corresponds with the height of the selected base profile (see the label).Remove, wherever present, the protection (protective and/or thermo-shrink film) of the profile’s finish.Measure and cut the base profile to the required length with the proper tools.
The base profile can be laid to the floor by:
Use of the adequate adhesive (such as PP/86); in this case, lay the profile, leaving sufficient space to insert the flooring to be laid and for itsexpansion (about 10mm); after making sure that the laying surface for the base is perfectly clean, press the profile so that the previouslyapplied adhesive comes out from the perforations of the tabs.
•
Use of screws and dowels; in which case: place the base profile, already cut to measure, in the correct position and, with indelible ink, markthe exact position of the holes of the base profile where drilling is necessary.Remove the base profile and drill into the floor in the exact positions marked in the previous step, careful to verify the exact dimensions of thedowels to be used.Clean the laying are completely and insert the dowels into the holes in the floor; reposition the profile into the correct position, mindful of theexpansion of the floor to be laid (about 10mm), then fix it to the floor with adequate screws.Measure and cut the top profile to the necessary length.
•
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 2/28
Apply the Teflon dowels to the guide underneath the top profile every 15 - 20cm.Position the corresponding top profile on the base profile (already fixed to the floor); carefully using a hammer (placing a wooden wedgebetween the top profile and the hammer to prevent damage), until it is fully inserted into the base profile.
Unisystem® - Junction
Unisystem® - Edge
Unisystem® - Stair Nosing
Care and maintenance
AluminumThese need no particular maintenance and are easily cared for with colorless alcohol diluted in water or with normal detergents, though not acid-basedproducts (e.g. hydrochloric or hydrofluoric acid).For cleaning tasks, a wide array of detergents coming in a variety of commercial brands and of numerous manufacturers are generally used.
In general, there are three product types:
Alkaline type• Neutral type• Acid type•
For cleaning, neutral detergent diluted in water and a rinsing agent of solely water is recommended, using a sponge and/or non-abrasive cloth toprevent scratches and/or damage to the anodization, shine or varnish.
During cleaning, the following should be kept in mind:
Do not use acid or alkaline detergents, since they can damage aluminum;• Do not use abrasive products and/or materials;• Do not use organic solvents on varnished surfaces;• Do not use detergents with unknown chemical compositions;• Do not apply detergents directly to the surface to be cleaned;• Surfaces must be relatively “cold” when cleaning (Max. Temp = 30ºC) and not exposed directly to sunlight;• Detergents used for cleaning must be in turn “cold” (Max. Temp = 30ºC) and spray devices must not be used.•
In any case, the last phase of cleaning is always an adequate rinsing with water on the part that has been treated, followed immediately by drying witha soft cloth or rag. Maintenance with polishing products or similar is unnecessary.
Effect a quick and accurate cleaning of the profile, according to the indications on the product’s packaging, in order to prevent possible cementdeposits, caulking material or similar products that may end up attacking the surface layers.Aluminum coated - Alcrom® PlusThis finish needs no special maintenance, since it is easily cleaned with alcohol diluted in water or with normal detergent that is not acid or alkalinebased, also diluted in water; rinsing thoroughly at the end with water only.Use a non-abrasive sponge or cloth to prevent scratches on the surface.Aluminum coated with shears of Real WoodThe film used for the coating of this profile is for all effects wood and therefore it should be cared for as such.In order to slow down the process of color variation of the wood over time, it is recommended to avoid direct exposure to sunlight.Cleaning can be carried out with normal detergents for parquet in stores, using a soft cloth, preferably in suede and well wrung.Avoid the use of any detergent that contains abrasive particles, which could scratch the surface of the profile.The surface should be wiped down and dried immediately after cleaning.
Fire Control Measures
In case of fire, extinguish with fire-fighting chemical products, dry sand or solid fire-extinguishing agents.
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 3/28
NOTE
These profiles must be handled with care, taking the necessary steps to use suitable gloves to prevent wounds such as cuts to the hand.
All indications and instructions here have come from our own experience to be understood as purely informative and will have to be confirmed throughexhaustive practical experience.
Profilpas will not be held responsible for any personal injury or material damage from improper use of the product.
The user is responsible for establishing whether the product is suitable for the task and likewise must assume all responsibility for incorrect laying ofmaterial.
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 4/28
C
Profile
Article C/7/SF C/10/SF C/13/SF C/22/SF
Floor thickness [mm] 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5 15,5 ÷ 22,6
Width L [mm] 40 45 48 52
Length [cm] 270 270 270 270
Anodised Aluminium
Silver 67007 67077 67147 66907
Gold 67017 67087 67157 66917
Sand Gold 67024 67094 67164 66924
Bronze 67027 67097 67167 66927
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 5/28
Profile in blister packaging
Article TPC/47/CV TPC/410CV TPC/413CV
Floor thickness [mm] 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5
Width L [mm] 40 45 48
Length [cm] 90 90 90
Anodised Aluminium
Silver 43214 43286 43358
Gold 43218 43290 43362
Profile
Article C/7/SF
Floor thickness [mm] 6,5 ÷ 9,5
Width L [mm] 40
Length [cm] 270
Bright satin Aluminium
Titanium 67030
Profile
Article C/7/SF C/10/SF C/13/SF C/22/SF
Floor thickness [mm] 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5 15,5 ÷ 22,6
Width L [mm] 40 45 48 52
Length [cm] 270 270 270 270
Alcrom Plus foiled Aluminium
Decor 02 66001
Dekor 04 66002
Decor 07 66003 66103 66203
Decor 08 66004 66104 66204
Decor 09 66005 66105 66205
Decor 10 66007 66107 66207 66937
Decor 11 66008
Decor 13 66010
Decor 15 66015 66115 66215
Decor 18 66016 66116 66216
Decor 20 66017 66117 66217 66939
Decor 30 66027 66127 66227
Decor 32 66029
Decor 34 66031
Decor 35 66032
Decor 36 66033 66133 66228
Decor 37 66034 66134 66229
Decor 38 66035 66135 66235
Decor 40 66037 66137 66237 66941
Decor 41 66038
Decor 42 66039 66139 66239
Decor 43 66040
Decor 44 66041
Decor 45 66043 66143 66243
Decor 46 66042
Decor 48 66045 66145 66245
Decor 50 66047 66147 66247 66947
Decor 60 66057 66157 66257 66949
Decor 65 66065 66165 66265
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 6/28
Decor 70 66067 66167 66267 66953
Decor 71 66068 66178 66268
Decor 72 66069 66179 66269
Decor 73 66070 66180 66270
Decor 74 66071 66181 66271
Decor 75 66075 66175 66275
Decor 76 66074 66182 66272
Decor 77 66072
Decor 78 66076 66176 66276
Decor 79 66073
Decor 80 66077 66177 66277 66957
Decor 81 66078
Decor 90 66087 66187 66287
66089
Decor 93 66090
Decor 94 66091
Decor 95 66092
Profile in blister packaging
Article TPC/47/CV TPC/410CV TPC/413CV
Floor thickness [mm] 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5
Width L [mm] 40 45 48
Length [cm] 90 90 90
Alcrom Plus foiled Aluminium
Decor 09 43230 43302 43374
Decor 10 43234 43306 43378
Decor 15 43238 43310 43382
Decor 20 43242 43314 43386
Decor 30 43246 43318 43390
Decor 38 43248 43320 43392
Decor 40 43250 43322 43394
Decor 42 43252 43324 43396
Decor 45 43254 43326 43398
Decor 48 43258 43330 43402
Decor 50 43262 43334 43406
Decor 60 43266 43338 43410
Decor 65 43270 43342 43414
Decor 70 43274 43346 43418
Decor 75 43278 43350 43422
Decor 78 43280 43352 43424
Decor 80 43282 43354 43426
Decor 90 43284 43356 43428
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 7/28
Profile
Article C/10/SF C/13/SF
Floor thickness [mm] 9,6 ÷ 12,5 12,6 ÷ 15,5
Width L [mm] 45 48
Length [cm] 270 270
Real Wood foiled Aluminium
Wood 300 60240 60350
Wood 310 60244 60354
Wood 320 60248 60358
Wood 330 60252 60362
Wood 340 60256 60366
Wood 350 60260 60370
Wood 360 60264 60374
Wood 370 60268 60378
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 8/28
Z
Profile
Article Z/1/SF Z/1/SF Z3/30/SF Z5/50
Floor thickness [mm] 6,5 ÷ 22,6 6,5 ÷ 22,6 6,5 ÷ 22,6 6,5 ÷ 22,6
Width L [mm] 35 40 30 50
Length [cm] 270 270 270 270
Anodised Aluminium
Silver 67217 63700 63760
Gold 67227 63702 63761
Sand Gold 67234 63704
Bronze 67237 63762
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 9/28
Profile in blister packaging
Article TPZ/47/CV TPZ/410CV TPZ/413CV
Floor thickness [mm] 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5
Width L [mm] 40 40 40
Length [cm] 90 90 90
Anodised Aluminium
Silver 43000 43072 43144
Gold 43004 43076 43148
Profile
Article Z/1/SF
Floor thickness [mm] 6,5 ÷ 22,6
Width L [mm] 40
Length [cm] 270
Bright satin Aluminium
Titanium 67240
Profile
Article Z/1/SF Z3/30/SF Z5/50
Floor thickness [mm] 6,5 ÷ 22,6 6,5 ÷ 22,6 6,5 ÷ 22,6
Width L [mm] 40 30 50
Length [cm] 270 270 270
Alcrom Plus foiled Aluminium
Decor 02 66301
Dekor 04 66302
Decor 07 66303 63717
Decor 08 66304 63718 63767
Decor 09 66305 63719 63768
Decor 10 66307 63720 63769
Decor 11 66308
Decor 12 66309
Decor 13 66310
Decor 15 66315 63721 63770
Decor 18 66316 63722
Decor 20 66317 63725 63772
Decor 30 66327 63726
Decor 32 66329
Decor 34 66331
Decor 35 66332
Decor 36 66333 63728 63774
Decor 37 66334 63729 63775
Decor 38 66335 63727 63776
Decor 40 66337 63730 63777
Decor 41 66338
Decor 42 66339 63731 63778
Decor 43 66340
Decor 44 66341
Decor 45 66343 63732 63779
Decor 46 66342
Decor 48 66345 63735 63780
Decor 50 66347 63740 63781
Decor 60 66357 63745 63782
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 10/28
Decor 65 66365 63746 63783
Decor 70 66367 63747 63784
Decor 71 66368 63752
Decor 72 66369 63753
Decor 73 66370 63754 63787
Decor 74 66371 63755 63788
Decor 75 66375 63748 63789
Decor 76 66374 63756 63790
Decor 77 66372
Decor 78 66376 63749 63791
Decor 79 66373
Decor 80 66377 63750 63792
Decor 81 66378
Decor 90 66387 63751 63793
66389
Decor 93 66390
Decor 94 66391
Decor 95 66392
Profile in blister packaging
Article TPZ/47/CV TPZ/410CV TPZ/413CV
Floor thickness [mm] 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5
Width L [mm] 40 40 40
Length [cm] 90 90 90
Alcrom Plus foiled Aluminium
Decor 09 43016 43088 43160
Decor 10 43020 43092 43164
Decor 15 43024 43096 43168
Decor 20 43028 43100 43172
Decor 30 43032 43104 43176
Decor 38 43034 43106 43178
Decor 40 43036 43108 43180
Decor 42 43038 43110 43182
Decor 45 43040 43112 43184
Decor 48 43044 43116 43188
Decor 50 43048 43120 43192
Decor 60 43052 43124 43196
Decor 65 43056 43128 43200
Decor 70 43060 43132 43204
Decor 75 43064 43136 43208
Decor 78 43066 43138 43210
Decor 80 43068 43140 43212
Decor 90 43070 43142 43213
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 11/28
Profile
Article Z/1/SF
Floor thickness [mm] 6,5 ÷ 22,6
Width L [mm] 40
Length [cm] 270
Real Wood foiled Aluminium
Wood 300 60200
Wood 310 60204
Wood 320 60208
Wood 330 60212
Wood 340 60216
Wood 350 60220
Wood 360 60224
Wood 370 60228
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 12/28
S
Profile
Article S/9/SF S/15/SF
Floor thickness [mm] 6,5 ÷ 22,6 9,6 ÷ 22,6
Height H1 [mm] 9.4 13
Width L [mm] 32 32
Length [cm] 270 270
Anodised Aluminium
Silver 65680 65480
Gold 65685 65485
Sand Gold 65688 65488
Bronze 65690 65490
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 13/28
Profile in blister packaging
Article TPS/47/CV TPS/410CV TPS/413CV
Floor thickness [mm] 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5
Height H [mm] 9.4 10 13
Width L [mm] 32 32 32
Length [cm] 90 90 90
Anodised Aluminium
Silver 43430 43502 43574
Gold 43434 43506 43578
Profile
Article S/9/SF
Floor thickness [mm] 6,5 ÷ 22,6
Height H1 [mm] 9.4
Width L [mm] 32
Length [cm] 270
Bright satin Aluminium
Titanium 65695
Profile
Article S/9/SF S/15/SF
Floor thickness [mm] 6,5 ÷ 22,6 9,6 ÷ 22,6
Height H1 [mm] 9.4 13
Width L [mm] 32 32
Length [cm] 270 270
Alcrom Plus foiled Aluminium
Decor 02 65701
Dekor 04 65702
Decor 07 65703
Decor 08 65704
Decor 09 65705 65505
Decor 10 65707 65507
Decor 11 65708
Decor 12 65709
Decor 13 65710
Decor 15 65715 65515
Decor 18 65716
Decor 20 65717 65517
Decor 30 65727 65527
Decor 32 65729
Decor 34 65731
Decor 35 65732
Decor 36 65733
Decor 37 65734
Decor 38 65735 65535
Decor 40 65737 65537
Decor 41 65738
Decor 42 65739 65539
Decor 44 65741
Decor 45 65743 65543
Decor 46 65742
Decor 48 65745 65545
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 14/28
Decor 50 65747 65547
Decor 60 65757 65557
Decor 65 65765 65565
Decor 70 65767 65567
Decor 71 65768
Decor 72 65769
Decor 73 65770
Decor 74 65771
Decor 75 65775 65575
Decor 76 65774
Decor 77 65772
Decor 78 65776 65576
Decor 79 65773
Decor 80 65777 65577
Decor 81 65778
Decor 90 65785 65579
65789
Decor 93 65790
Decor 95 65792
Profile in blister packaging
Article TPS/47/CV TPS/410CV TPS/413CV
Floor thickness [mm] 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5
Height H [mm] 9.4 10 13
Width L [mm] 32 32 32
Length [cm] 90 90 90
Alcrom Plus foiled Aluminium
Decor 09 43446 43518 43590
Decor 10 43450 43522 43594
Decor 15 43454 43526 43598
Decor 20 43458 43530 43602
Decor 30 43462 43534 43606
Decor 38 43465 43537 43609
Decor 40 43466 43538 43610
Decor 42 43468 43540 43612
Decor 45 43470 43542 43614
Decor 48 43474 43546 43618
Decor 50 43478 43550 43622
Decor 60 43482 43554 43626
Decor 65 43486 43558 43630
Decor 70 43490 43562 43634
Decor 75 43494 43566 43638
Decor 78 43497 43569 43641
Decor 80 43498 43570 43642
Decor 90 43500 43572 43644
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 15/28
Profile
Article S/9/SF
Floor thickness [mm] 6,5 ÷ 22,6
Height H1 [mm] 9.4
Width L [mm] 32
Length [cm] 270
Real Wood foiled Aluminium
Wood 300 60280
Wood 310 60284
Wood 320 60288
Wood 330 60292
Wood 340 60296
Wood 350 60300
Wood 360 60304
Wood 370 60308
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 16/28
P1
Profile
Article P/1/SF
Floor thickness [mm] 6,5 ÷ 22,6
Width L [mm] 37
Length [cm] 270
Anodised Aluminium
Silver 66407
Gold 66417
Bronze 66427
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 17/28
Profile
Article P/1/SF
Floor thickness [mm] 6,5 ÷ 22,6
Width L [mm] 37
Length [cm] 270
Alcrom Plus foiled Aluminium
Decor 09 66435
Decor 10 66437
Decor 15 66455
Decor 20 66457
Decor 30 66467
Decor 40 66477
Decor 42 66479
Decor 45 66483
Decor 48 66485
Decor 50 66487
Decor 60 66497
Decor 65 66505
Decor 70 66507
Decor 75 66515
Decor 80 66517
Decor 90 66519
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 18/28
G/1
Profile
Article G/1/SF
Floor thickness [mm] 6,5 ÷ 15
Length [cm] 270
Anodised Aluminium
Silver 66557
Gold 66567
Sand Gold 66574
Bronze 66577
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 19/28
Profile in blister packaging
Article TG/411/CV TG/415/CV
Floor thickness [mm] 6,5 ÷ 10 11 ÷ 15
Height H [mm] 20 20
Width L [mm] 25 25
Length [cm] 107 107
Anodised Aluminium
Silver 45006 45106
Gold 45012 45112
Profile
Article G/1/SF
Floor thickness [mm] 6,5 ÷ 15
Length [cm] 270
Alcrom Plus foiled Aluminium
Decor 09 66585
Decor 10 66587
Decor 15 66595
Decor 20 66597
Decor 30 66607
Decor 38 66615
Decor 40 66617
Decor 42 66619
Decor 45 66623
Decor 48 66625
Decor 50 66627
Decor 60 66637
Decor 65 66645
Decor 70 66647
Decor 75 66655
Decor 78 66656
Decor 80 66657
Decor 90 66667
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 20/28
Profile in blister packaging
Article TG/411/CV TG/415/CV
Floor thickness [mm] 6,5 ÷ 10 11 ÷ 15
Height H [mm] 20 20
Width L [mm] 25 25
Length [cm] 107 107
Alcrom Plus foiled Aluminium
Decor 09 45204
Decor 10 45206 45306
Decor 15 45208
Decor 20 45212 45312
Decor 30 45218 45318
Decor 40 45224 45324
Decor 42 45225
Decor 45 45226
Decor 48 45228
Decor 50 45230 45330
Decor 60 45236 45336
Decor 65 45238
Decor 70 45242 45342
Decor 75 45244
Decor 80 45245 45345
Decor 90 45246
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 21/28
G/4
Profile
Article G/4/SF
Floor thickness [mm] 6,5 ÷ 15
Length [cm] 270
Anodised Aluminium
Silver 63900
Gold 63902
Sand Gold 63904
Profile
Article G/4/SF
Floor thickness [mm] 6,5 ÷ 15
Length [cm] 270
Alcrom Plus foiled Aluminium
Decor 02 63905
Dekor 04 63909
Decor 07 63906
Decor 08 63907
Decor 09 63908
Decor 10 63910
Decor 12 63913
Decor 13 63916
Decor 15 63912
Decor 18 63914
Decor 20 63915
Decor 30 63918
Decor 32 63917
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 22/28
Decor 34 63923
Decor 35 63924
Decor 36 63942
Decor 37 63943
Decor 38 63919
Decor 40 63920
Decor 42 63921
Decor 43 63927
Decor 44 63929
Decor 45 63922
Decor 46 63936
Decor 48 63925
Decor 50 63928
Decor 60 63930
Decor 65 63931
Decor 70 63932
Decor 71 63951
Decor 72 63952
Decor 73 63953
Decor 74 63954
Decor 75 63933
Decor 76 63956
Decor 77 63937
Decor 78 63934
Decor 79 63938
Decor 80 63935
Decor 81 63939
Decor 90 63940
63941
Decor 93 63944
Decor 94 63945
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 23/28
G/5
Profile
Article G/5
Floor thickness [mm] 6,5 ÷ 10
Length [cm] 270
Anodised Aluminium
Silver 63850
Gold 63852
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 24/28
G/6
Profile
Article G/6/SF
Floor thickness [mm] 6,5 ÷ 15
Length [cm] 270
Anodised Aluminium
Silver 63800
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 25/28
BASI UNISYSTEM® PLUS
Profile
Article TBU/6 A TPU/6 TPU/10 TPU/13 TPU/15 TPU/22
Adhesive
Floor thickness [mm] 6,5 ÷ 9,5 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5 15 ÷ 19 19,6 ÷ 22,6
Length [cm] 270 270 270 270 270 270
Natural Aluminium
67436 67437 67447 67457 67460 67467
Fixing clip
Article TU/6
Height H [mm] 6
Teflon
68812
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 26/28
BASI UNISYSTEM®
Profile
Article T/7 T/10 T/11 T/13 T/15
Floor thickness [mm] 6,5 ÷ 9,5 10 ÷ 12 6,5 ÷ 10 13 ÷ 15 11 ÷ 15
Length [cm] 270 270 270 270 270
Natural Aluminium
67287 67297 67317 67307 67327
10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 27/28
Recommended