View
223
Download
2
Category
Preview:
DESCRIPTION
Product catalogue 2016 UK
Citation preview
PR
OD
UC
T C
ATA
LO
GU
E |
UK
INTRODUCTION 5
CONSTRUCTION 10
MOUNTING PRINCIPLE | SHOWERLINE 12
SOLUTIONS 14
DRAIN UNIT | LINE | WALL 16
MOUNTING SET | WALL | FLOOR 19
MOUNTING ELEMENT | WALL 19
DRAIN UNIT | CORNER | WALL 20
OUTLET UNITS 22
OUTLET UNIT | LINE 22
OUTLET UNIT | CORNER 28
ACCESSORIES | LINE 32
ACCESSORIES | CORNER 33
CLASSICLINE FRAME | WALL 34
CLASSICLINE GRATING 35
CLASSICLINE SOAP SHELF 37
HIGHLINE PANEL | CORNER 38
HIGHLINE FRAME | LINE | WALL 39
HIGHLINE PANEL | LINE 40
HIGHLINE CASSETTE | LINE 41
HIGHLINE CUSTOM | LINE 42
HIGHLINE CUSTOM | MOUNTING 45
SHOWERLINE | FIXED MODULE 46
SHOWERLINE | FLEXIBLE MODULE 48
GLASSLINE | SHOWER BASE 49
GLASSLINE | SHOWER SCREENS 50
GLASSLINE | SHOWER DOOR 53
GLASSLINE | TOP RAILS 54
MODULE 1100 56
FLEX FRAMES 58
FREESTANDING SYSTEM 60
DRAIN UNIT | LINE | FLOOR 61
CLASSICLINE FRAME | FLOOR 62
CLASSICLINE FRAME | FLOOR 63
MATLINE 66
3
VA 2.42/19872
In 2003 unidrain® was the first company in the world to develop
a line drain to be placed against the wall in the shower cubicle.
Back then, high-end floor drain design was a new and revolutionary
concept. In just a few years, unidrain® developed into one of the
leading floor drain manufacturers. Ten years later, unidrain® has
won many international design awards and be represented in over
30 countries around the world.
WORLD CLASS DANISH DESIGN
5
for HighLine
6
Bed
re B
ad ©
unidrain® GlassLine is a range of shower screens designed
as a natural extension of the original unidrain® floor drain.
Using a uniqueflange system, the shower screen is simply
and securely installed in the floor and walland represents a
complete concept together with the unidrain® floor drain.
The GlassLine shower screen can be installed in two ways:
The fixed module embraces the entire shower
cubicle with an integrated drain unit.
The flexible module can be installed on a regular drain unit.
Both solutions can be combined with outlet unit,
frame, grating/panel and shower screen.
GLASSLINE & SHOWERLINE
Shower screen and floor drain
FLOOR DRAINS
unidrain®’s floor drains are an intelligent and functional solution.
The system is composed of drain unit, outlet unit, frame and
grating/panel, and are available in both line and corner solutions.
The two design ranges, ClassicLine and HighLine, each offer
clean lines and streamlined design and constitute the top,
visible part of the floor drain. The installation of the drain unit
and the outlet unit is the same for both ranges.
7
A
B
C
D
A
B
D
FF
D D
A
A
B B
C C
EE
FLEXIBLE MODULEFIXED MODULE
A: Grating or panelB: Frame D: Outlet unitE: Fixed moduleF: Shower screen
A: Grating or panelB: Frame C: Drain unitD: Outlet unitE: Flexible moduleF: Shower screen
the unidrain® principle
Combining the products is very simple.
With just a few choices, you can select a solution
that suits your bathroom.
A: Grating or panelB: FrameC: Drain unitD: Outlet unit
A: Grating or panellB: FrameC: Drain unit D: Outlet unit
UNIDRAIN® LINE UNIDRAIN® CORNER
8
CLASSICLINE
ClassicLine is the original design range from unidrain®
and consists of frame and grating. A selection of elegant
and timeless grating designs in brushed stainless steel
ensures that there is a product to suit all tastes.
WORTH KNOWING
• The drain unit and outlet
unit are the same for both
ClassicLine and HighLine
• The frame is mandatory, as
the grating is supported by
the frame
ClassicLine
9
In the HighLine range, the traditional grating is replaced by
a panel available in three solutions:
- Panel is a brushed stainless steel or frosted glass solution
- Custom is a flat base on top of which you lay your choice of floor tile
- Cassette is a base with wall/floor junctions all the way around,
making it suitable for flooring such as terrazzo
(using own material).
HIGHLINE
Design for floor drains
The top, visible part of the floor drain is available
in two design ranges: ClassicLine and HighLine.
WORTH KNOWING
• The drain unit and outlet unit
are the same for both
ClassicLine and HighLine
• The frame is optional and
can be omitted, leaving just
a narrow slit in the floor to
allow water to drain away
HighLineHighLine
10
CONSTRUCTION unidrain® is placed directly against the rear wall.The vertical wall flanges are fixed to the wall and ensure a completely waterproof overlap with the membrane.
Similarly, the horizontal floor flanges ensure the floor is waterproof by overlapping the floor membrane.
Floor flange
Reinforcement
Floor membrane
Wall membrane
Reinforcement
Wall flange
Wooden floor joists with 22 mm
floor plate (plywood or similar).
Waterproofing system such as
lubrication membrane with sealing
tape/ reinforcement tape.
Tile/tiled brick flooring.
Shown with Mounting Set 22 mm
(see page 19).
In-situ concrete on a stable poured
foundation with a base made from
concrete or other suitable base
material.
Lubrication membrane with sealing
tape/reinforcement tape. Tile/tiled
brick flooring.
unidrain® is tested and approved for
internal fitting with all types of
floor structures for wet rooms with
tiles, heavy concrete structures and
lightweight wooden floor joists. For
mounting in wooden floor joists and
other lightweight floor constructions,
we recommend using the unidrain®
Mounting Set (see page 19).
For all structures, the materials and
building methods used must be suited to
and approved for use in a wet room.
Detailed building guidelines can be
downloaded from www.unidrain.com
CONCRETE WOODEN FLOOR JOISTS
FOR ALL TYPES OF STRUCTURES
11
1
2
3
4
5
unidrain®’s unique construction is patented
in Europe (no. 1287213) and awaiting patent
approval in a number of countries worldwide.
unidrain® is a registered trademark.
RELIABLE RESULT
Because unidrain® is placed against the wall, it only
requires a single-sided slope as opposed to the
traditional four-sided incline. It is thus easier to produce
a correct base without the risk of depressions or reverse
slope.
The result is a completely level floor surface. This makes
it easier to lay large tiles that do not require cutting
around the drain. The end result is both waterproof and
reliable.
SIMPLE AND PRECISE FITTING AND MOUNTING
Simple and easy mounting with precise fitting ensures
correct placement during the entire building process
FIXATION DURING POURING
The drain unit is fixed throughout the entire pouring
process, ensuring it does not move. Placement against
the wall, away from the work area, eases the task of
reinforcement and floor heating.
EASY PRODUCTION OF A BASE WITH ONE-SIDED SLOPE
A one-sided base makes it easier to produce a correct
base without the risk of reverse slope and depressions.
The base for the tiled surface is thus completely even
and smooth.
WET ROOM SECURE CONNECTION WITH WALL AND
FLOOR
The overlap of the membrane with the floor and wall
flanges of the drain forms a waterproof and wet room
secure seal with the floor and wall.
EASY TILE FITTING ON A TOTALLY FLAT SURFACE
The one-sided slope makes tile laying even easier,
even with very large tiles. It is not necessary to cut the
tiles to fit around the drain.
1.
2.
3.
4.
5.
BUILDING METHOD
EN 1253
EN 1253(European Standard
for floor drains)
12
GlassLine construction is
available in two types: the fixed
and the flexible module.
The fixed module is a natural extension
of the original design of the floor drain.
The fixed module consists of two
welded profiles placed perpendicularly
on the drain unit: One is for mounting
on the side wall and the other is used
for mounting the shower screen.
The flexible module is a separate
profile, which is attached and fastened
to the existing drain units with bolts.
The shower screen is then mounted.
CONSTRUCTIONTWO MODELS
FIXED MODULE FLEXIBLE MODULE
WORTH KNOWING
• Can be combined with both
ClassicLine and HighLine (with frame)
• Can be installed with HighLine
Custom without frame
• Can be combined with drain unit,
outlet unit, frame, grating/panel and
shower screen from the permanent
range
WORTH KNOWING
• Can be combined with both
ClassicLine and HighLine (with frame)
• The drain unit is a part of the
fixed module
• Can be combined with outlet unit,
frame, grating/panel and shower
screen from the permanent range
Wall membrane
Reinforcement
Reinforcement
Wall profile
Reinforcement
Reinforcement
Fixed module
Fixed module
Floor membrane
MOUNTING PRINCIPLEUNIDRAIN® GLASSLINE
13
WHAT MAKES GLASSLINE UNIQUE
- Patented system: A single complete solution for the bathroom
- Secure watertight covering of the entire shower cubicle
- Quick and easy installation
- Defines the slope in the shower cubicle
- No visible fittings or screws
- Glass surfaces are treated with Cleantec for easier maintenance
- Easy to install with underfloor heating
unidrain®’s patented flange system is extended to the installation
of the shower screen, making GlassLine the strongest and most wet
room secure installation ever for shower cubicles.
The fixed/flexible module is fitted to the wall and embedded firmly
into the floor. When the floor is poured, it follows the two % slope
in the shower cubicle to make the pouring process easier than ever
before, and decreases the risk of depressions or reverse slope. The
wall profile is fixed to the rear wall and the shower screen is attached
to the profile as well as inserted into the track in the fixed/flexible
module. Wall and floor flanges ensure a 100 % waterproof solution
and the tiles elegantly conceal the strong underlying installation.
The shower screen is now firmly attached to both the wall and floor,
eliminating the risk of loosening over time.
INSTALLATION PRINCIPLE
WORTH KNOWING
• The shower screen can be
installed either before or after
tile fitting
• The shower screen is mounted
on a rail on the wall and can be
replaced in case of damage
14
Install unidrain® in the corner or let it follow the corners.
Place unidrain® along a wall, in a sunken shower cubicle or quite simply wherever there is a need for it.
The illustrations show examples of simple and functional shower cubicles that are possible using unidrain®’s unique floor drain system.
SOLUTIONS
Line solution:
1004 in an open bathroom
Line solution:
1004 in sunken niche in open bathroom.
Corner solution:
2011 in sunken corner niche.
Module solution:
1100 wall-to-wall in larger bathroom.
15
Line solution:
1001 in niche with three solid walls.
Line solution:
5002 with right aligned shower screen.
Module solution:
1100 in larger niche with three solid walls.
Module solution:
1100 in inward corner.
16
(L)(C)
150 80
1019
57
150
54
48
71
86103
H
(L)(R)
(C)
57 (H)
57
150
54
47
71H
86103
(L)(R)
57
(C)
(H)
(L)(C)
150
8010
19
10021001
Total construction height (excl. frame/grating) = height of the outlet unit + (H).
(H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.
NOTE!
*570769200xxxx
D R A IN U NI T | L INE | WA L L
LINE 1001 LINE 1002
For shower cubicle with three solid walls.
The drain unit has three wall flanges and one floor flange.
For shower cubicle with open right side, glass wall or
similar.
The drain unit has two wall flanges and two floor flanges.
Usage: Line drain Line drain
Wall flange: Rear wall/left/right Rear wall/left
Length model: 700* 800* 900* 1000* 1200* 700* 800* 900* 1000* 1200*
*Installation length (L): 702 mm 802 mm 902 mm 1,002 mm 1,202 mm 757 mm 857 mm 957 mm 1,057 mm 1,257 mm
Frame (R): 695 mm 795 mm 895 mm 995 mm 1,195 mm 695 mm 795 mm 895 mm 995 mm 1,195 mm
Center (C): 351 mm 401 mm 451 mm 501 mm 601 mm 351 mm 401 mm 451 mm 501 mm 601 mm
Height (H): 17 mm 18 mm 19 mm 20 mm 22 mm 17 mm 18 mm 19 mm 20 mm 22 mm
Item no.: 1001.0700 1001.0800 1001.0900 1001.1000 1001.1200 1002.0700 1002.0800 1002.0900 1002.1000 1002.1200
EAN no.*: 3030 3047 3054 3061 3078 3085 3092 3108 3115 3122
17
HighLine
ClassicLine+
57
150
54
48
71H
85103
(L)(C)
15080
1019
(L)(R)
57
(C)
(H)
(L)(C)
150 80
1019
150
54
48
71H
86103
57
(L)(R)
(C)
(H)57
10041003
Total construction height (excl. frame/grating) = height of the outlet unit + (H).
(H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.
NOTE!
Specifications
Materials: 1.5 mm stainless steel (AISI 304)Surface: PickledMembrane: Lubrication membrane or sheet membranes.Floor construction: AllFlooring: Tiles/tile bricks
LINE 1003 LINE 1004
For shower cubicle with open left side, glass wall or
similar.
The drain unit has two wall flanges and two floor flanges
Can be freely positioned against rear wall, independent of any side
walls.
The drain unit has one wall flange and three floor flanges.
Line drain Line drain
Rear wall/right Rear wall
700* 800* 900* 1000* 1200* 300* 700* 800* 900* 1000* 1200*
757 mm 857 mm 957 mm 1,057 mm 1,257 mm 432 mm 812 mm 912 mm 1,012 mm 1,112 mm 1,312 mm
695 mm 795 mm 895 mm 995 mm 1,195 mm 315 mm 695 mm 795 mm 895 mm 995 mm 1,195 mm
351 mm 401 mm 451 mm 501 mm 601 mm 216 mm 406 mm 456 mm 506 mm 556 mm 656 mm
17 mm 18 mm 19 mm 20 mm 22 mm 12 mm 17 mm 18 mm 19 mm 20 mm 22 mm
1003.0700 1003.0800 1003.0900 1003.1000 1003.1200 1004.0300 1004.0700 1004.0800 1004.0900 1004.1000 1004.1200
3139 3146 3153 3160 3177 3238 3184 3191 3207 3214 3221
*Please note fitting
dimensions!
18
(L)(C)
150 80
1019
150
54
48
71H
86103
57
(L)(R)
(C)
(H)
185
57
(L)(C)
150 80
1019
150
54
48
71H
86103
57
(L)(R)
(H)
(C)185
57
*570769200xxxx
ClassicLine
1004 1004
D R A IN U NI T | L INE | WA L L Specifications
Materials: 1.5 mm stainless steel (AISI 304)Surface: PickledMembrane: Lubrication membrane or sheet membranes.Floor construction: AllFlooring: Tiles/tile bricks
LINE 1004 LINE 1004
With side drain on right
Can be freely positioned against rear wall, independent
of any side walls. Only for use with ClassicLine.
With side drain on left.
Can be freely positioned against rear wall, independent
of any side walls. Only for use with ClassicLine.
Usage: Line drain Line drain
Wall flange: Rear wall Rear wall
Length model: 700* 800* 900* 1000* 1200* 700* 800* 900* 1000* 1200*
*Installation length (L): 812 mm 912 mm 1012 mm 1112 mm 1312 mm 812 mm 912 mm 1012 mm 1112 mm 1312 mm
Frame (R): 695 mm 795 mm 895 mm 995 mm 1195 mm 695 mm 795 mm 895 mm 995 mm 1195 mm
Center (C): 406 mm 456 mm 506 mm 556 mm 656 mm 406 mm 456 mm 506 mm 556 mm 656 mm
Height (H): 28 mm 28 mm 28 mm 28 mm 28 mm 28 mm 28 mm 28 mm 28 mm 28 mm
Item no.: 1004.0705 1004.0805 1004.0905 1004.1005 1004.1205 1004.0706 1004.0806 1004.0906 1004.1006 1004.1206
EAN no.*: 9216 9223 9230 9247 9254 9261 9278 9285 9292 9308
*Please note fitting
dimensions!
Total construction height (excl. frame/grating) = height of the outlet unit + (H).
(H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.
NOTE!
19
M O U N T IN G S E T | WA L L | F LO O RM O U N T IN G EL EMEN T | WA L L
unidrain® with ClassicLine frame/grating and Mounting Set 22 mm | wall. unidrain® with ClassicLine frame/grating and Mounting Element 135 mm.
MOUNTING SET 22 MM MOUNTING ELEMENT
Line | wall
300-1000 mm
Line | wall
1,200 mm
Corner | wall
200 mm
Line | floor
300-900 mm
Line | wall
100 mm
Line | wall
135 mm
The set consists of a front, back and side profile(s) that are mounted into
wooden joists using screws. The drain unit is inserted into the profile and
”clicked” in place.
Ensures correct placement and fitting of drain unit in wooden floor joist
construction. It is customised to various lengths by cutting the front and back
profile.
Easier mounting with prefabricated
polystyrene sheets.
Can be cut to size and adapted to fit
all model lengths.
Usage: Line drain | wall Line drain | wall Corner drain | wall Line drain | floor Line drain Line drain
Fits length model: 300-1000 1200 200 300-900 300-1200 300-1200
Materials: Stainless steel/wood Stainless steel/wood Stainless steel/wood Stainless steel/wood EPS EPS
Surface: Pickled/wood Pickled/wood Pickled/wood Pickled/woodFibreglass-reinforced
mortar surfaceFibreglass-reinforced
mortar surface
Fits: 1001.0300-10001002.0300-10001003.0300-10001004.0300-1000
1001.12001002.12001003.12001004.1200
2011.02003002.0700-09003004.0300-0900
All line drain units
| wall
All line drain units
| wall
Item no.: 1804.1022 1804.1222 2801.0222 3804.0922 1860.0100 1860.0135
EAN no.*: 3597 3603 4136 6574 6406 6413
*570769200xxxx
20
HighLine
ClassicLine+
193L2 / 267 mm
L1 / 377 mm
L2 / 2
67 m
m
196
2011
*570769200xxxx
D R A IN U NI T | C O R NER | WA L L Specifications
Materials: 1.5 mm stainless steel (AISI 304)Surface: PickledMembrane: Lubrication membrane or sheet membranes.Floor construction: AllFlooring: Tiles/tile bricks
CORNER 2011
The drain unit has two wall flanges and one floor flange.
Shower cubicle with corner drain
Usage: Corner drain
Wall flange Two rear walls
Length model: 200
Length (L): L1: 377/L2: 267 mm
Frame (R): 270/193mm
Item no.: 2011.0200
EAN no.*: 6659
Total construction height (excl. frame/grating) = see page 32-34.NOTE!
21
22
218
52
218
D32
32
52 3038
150
12245
80
(H)
218
218
52 52
50
50
132
38
D 50
150
45
80
(H)
218
218
52
50
D 50
52
50
132
30
150
45
80
(H)
218
52
218
D32
32
52 3038
150
12245
80
(H)
218
218
52 52
50
50
132
38
D 50
150
45
80
(H)
218
218
52
50
D 50
52
50
132
30
150
45
80
(H)
O U T L E T U NI T | L INE
Extra lowinstallation
height:52 mm
EExtra lowinstallation
height:52 mm
Extra lowinstallation
height:52 mm
LINE 1311.0032 LINE 1311.0050 LINJE 1417.0050
Horizontal outlet unit Ø 32 mm.
Excl. ordour barrier.
Can be turned 180˚ if a backward
facing outlet is required.
Horizontal outlet unit Ø 50 mm.
Excl. ordour barrier.
Can be turned 180˚ if a backward
facing outlet is required.
Horizontal outlet unit Ø 50 mm.
Includes built-in odour barrier with
high self-cleaning effect.
The odour barrier can be removed
and cleaned.
Can be turned 180˚ if a backward
facing outlet is required.
Note: The odour barrier is VA
approved.
Usage: Line drain Line drain Line drain
Outletdimensions: Ø 32 mm Ø 50 mm Ø 50 mm
Outlet direction: Horizontal Horizontal Horizontal
Capacity: 0.4 l/s 0.85 l/s 0.6 l/s
Water trap/odour barrier: Without Without With (odour barrier)
Side inlet: Without Without Without
Fits:1001, 1002, 1003, 1004, 1100,
3002, 3004, 5002, 50031001, 1002, 1003, 1004, 1100,
3002, 3004, 5002, 50031001, 1002, 1003, 1004, 1100,
3002, 3004, 5002, 5003
Item no.: 1311.0032 1311.0050 1417.0050
EAN no.*: 7892 7908 7915
Total construction height (excl. tiles) = height of the outlet unit + (H). (H) = Distance from top edge of outlet unit to underside of tile.
(See measurement specifications for the selected drain unit p. 16-17). The construction height indicated may vary by 3 mm due to manufacturing tolerances.
NOTE!
*570769200xxxx
23
218
218
96
49
50
75
58
80
150
(H)
218
218
96
50
75
91
80
150
(H)
66
90
75
75
260
180
140
150
190
75
80
75
66
(H)
218
218
96
50
75
91
80
150
(H)
66
218
218
96
49
50
75
58
80
150
(H)
SpecificationsMaterials: Plastic (PP)
Gasket: EPDM)
• LOWER INSTALLATION HEIGHT
• LARGER CAPACITY
• LOCK FIXTURE FOR DRAIN UNIT
Extra lowinstallation
height:50 mm
Extra lowinstallation
height:50 mm
LINE 1312.0050 LINE 1312.0075 LINE 1850.0075
Vertical outlet unit Ø 50 mm.
Excl. ordour barrier.
Vertical outlet unit Ø 75 mm.
Excl. ordour barrier.
P-water trap Ø 75 mm.
High self-cleaning effect.
P-water trap can be used instead of
the built-in water trap/odour barrier
that comes with some of the outlet
units.
Suitable for installation in frequently
used showers.
Line drain Line drain Line drain
Ø 50 mm Ø 75 mm Ø 75 mm
Vertical Vertical Horizontal
1.7 l/s 2.5 l/s 1.7 l/s
Without Without
Without Without
1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003
1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003
Outlet unit 1312.0075, 1412.0075, 1414.0075, 2412.0075
1312.0050 1312.0075 1850.0075
7922 7939 7946
Extra lowinstallation
height:140 mm
24
218
218
86 50
50
132
54
D50
80
150
45
86
(H)218
D 50
218
5086
72
58
80
150
86
(H)
45
218
D 50
218
5086
72
58
80
150
86
(H)
45
218
218
86 50
50
132
54
D50
80
150
45
86
(H)
*570769200xxxx
LINE 1411.0050 LINE 1415.0050
Horizontal outlet unit Ø 50 mm.
Incl. built-in water trap.
The water trap can be removed, separated and cleaned.
Can be turned 180˚ if a backward facing outlet is required
Horizontal outlet unit Ø 50 mm.
Incl. built-in water trap.
The water trap can be removed, separated and cleaned.
Can be turned 180˚ if a right or left facing outlet is
required.
Usage: Line drain Line drain
Outlet dimensions: Ø 50 mm Ø 50 mm
Outlet direction: Horizontal Horizontal
Capacity: 0.91 l/s 0.8 l/s
Water trap: With With
Side inlet: Without Without
Fits: Unit 1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003 Unit 1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003
Item no.: 1411.0050 1415.0050
EAN no.*: 7960 8288
O U T L E T U NI T | L INE
Total construction height (excl. tiles) = height of the outlet unit + (H). (H) = Distance from top edge of outlet unit to underside of tile.
(See measurement specifications for the selected drain unit p. 16-17). The construction height indicated may vary by 3 mm due to manufacturing tolerances.
NOTE!
25
218
218
86
75
75
48
140
D75
80
150
86
(H)
45
80
150
218
218
75
147
75 45
86
86
(H)
1780
150
218
218
75
147
75 45
86
86
(H)
17
218
218
86
75
75
48
140
D75
80
150
86
(H)
45
LINE 1411.0075 LINE 1412.0075
Horizontal outlet unit Ø 75 mm.
Incl. built-in water trap.
The water trap can be removed, separated and cleaned.
Can be turned 180˚ if a backward facing outlet is required.
Vertical outlet unit Ø 75 mm.
Incl. built-in water trap.
The water trap can be removed, separated and cleaned.
Line drain Line drain
Ø 75 mm Ø 75 mm
Horizontal Vertical
1.0 l/s 1.5 l/s
With With
Without Without
Unit 1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003 Unit 1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003
1411.0075 1412.0075
7977 7984
SpecificationsMaterials: Plastic (PP)
Gasket: EPDM
• LOWER INSTALLATION HEIGHT
• LARGER CAPACITY
• LOCK FIXTURE FOR DRAIN UNIT
26
218
218
40
178
75
75 142
140
119
54
D75D40
80
150
45
218
218
40
178
75
75 142
140
119
54
D75D40
80
150
45
218
75
218
4024
3 D40
178
89
80
150
119
54
218
75
218
4024
3 D40
178
89
80
150
119
54
LINE 1413.0075 LINE 1414.0075
Horizontal outlet unit Ø 75 mm.
Incl. built-in water trap (can be separated and cleaned).
Note: The water trap has two function options:
- Place the water trap at the top so it is used only for the
floor drain.
- Push the water trap down into the outlet unit so that it
can also be used for the two upper side inlets.
The two lower inlets require a separate water trap. Can be
turned 180˚ if a backward facing outlet is required.
Vertical outlet unit Ø 75 mm.
Incl. built-in water trap (can be separated and cleaned).
Note: The water trap has two function options:
- Place the water trap at the top so it is used only for the
floor drain.
- Push the water trap down into the outlet unit so that it
can also be used for the two upper side inlets.
The two lower inlets require a separate water trap.
Usage: Line drain Line drain
Outlet dimensions: Ø 75 mm Ø 75 mm
Outlet direction: Horizontal Vertical
Capacity: 1.5 l/s 1.85 l/s
Water trap: With With
Side inlet: 4 pcs. Ø 40 mm (can be opened if required) 4 pcs. Ø 40 mm (can be opened if required)
Fits: Unit 1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003 Unit 1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003
Item no.: 1413.0075 1414.0075
EAN no.*: 7991 8004
O U T L E T U NI T | L INE
Total construction height (excl. tiles) = height of the outlet unit + (H). (H) = Distance from top edge of outlet unit to underside of tile.
(See the measurement specifications for the selected drain unit).
The construction height indicated may vary by 3 mm due to manufacturing tolerances.
NOTE!
• LOWER INSTALLATION HEIGHT
• LARGER CAPACITY
• LOCK FIXTURE FOR DRAIN UNIT
*570769200xxxx
27
28
O U T L E T U NI T | C O R NER
CORNER 2311.0032 CORNER 2311.0050
Horizontal outlet Ø 32 mm.
Excl. ordour barrier.
Can be rotated 360˚, which may facilitate direction of
pipework.
Horizontal outlet Ø 50 mm.
Excl. ordour barrier.
Can be rotated 360˚, which may facilitate direction of
pipework.
Usage: Corner drain Corner drain
Outlet dimensions Ø 32 mm Ø 50 mm
Outlet direction: Horizontal Horizontal
Capacity: 0.5 l/s 0.8 l/s
Water trap: Without Without
Side inlet: Without Without
Fits: Unit 2011.0200 Unit 2011.0200
Item no.: 2311.0032 2311.0050
EAN no.*: 6581 6598
Extra lowinstallation
height:51 mm
Extra lowinstallation
height:51 mm
32
51
D170
D32
D128
56
72
87139
196
20535
162
32
51
D170
D32
D128
56
72
87139
196
20535
162
50
D205
D50 51
D128
47
72
24035
162
87139
196
50
D205
D50 51
D128
47
72
24035
162
87139
196
(See the measurement specifications for the selected drain unit). The construction height indicated may vary by 3 mm due to manufacturing tolerances.NOTE!
*570769200xxxx
29
SpecificationsMaterials: Plastic (PP)
Gasket: EPDM
CORNER 2415.0032 CORNER 2415.0050
Horizontal outlet Ø 32 mm.
Includes built-in odour barrier with high self-cleaning
effect.
The odour barrier can be removed and cleaned.
Can be rotated 360˚, which may facilitate direction of
pipework.
Note: The odour barrier is VA approved.
Horizontal outlet Ø 50 mm.
Includes built-in odour barrier with high self-cleaning
effect.
The odour barrier can be removed and cleaned.
Can be rotated 360˚, which may facilitate direction of
pipework.
Note: The odour barrier is VA approved.
Corner drain Corner drain
Ø 32 mm Ø 50 mm
Horizontal Horizontal
0.4 l/s 0.5 l/s
With (odour barrier) With (odour barrier)
Without Without
Unit 2011.0200 Unit 2011.0200
2415.0032 2415.0050
6789 6796
Extra lowinstallation
height:51 mm
Extra lowinstallation
height:51 mm
32
D170
D32
51
D128
56
72
20535
162
87139
196
32
D170
D32
51
D128
56
72
20535
162
87139
196
50
D205
D50 51
D128
24035
47
72
162
87139
196
50
D205
D50 51
D128
24035
47
72
162
87139
196
30
O U T L E T U NI T | C O R NER SpecificationsMaterials: Plastic (PP)
Gasket: EPDM
CORNER 2411.0050 CORNER 2411.0075 CORNER 2412.0075
Horizontal outlet Ø 50 mm.
Incl. built-in water trap (can be
separated and cleaned).
Can be rotated 360˚, which may
facilitate direction of pipework.
Horizontal outlet Ø 75 mm.
Incl. built-in water trap (can be
separated and cleaned).
Can be rotated 360˚, which may
facilitate direction of pipework.
Vertical outlet Ø 75 mm.
Incl. built-in water trap (can be
separated and cleaned).
Usage: Corner drain Corner drain Corner drain
Outlet dimensions Ø 50 mm Ø 75 mm Ø 75 mm
Outlet direction: Horizontal Horizontal Vertical
Capacity: 0.8 l/s 0.9 l/s 1.0 l/s
Water trap: With With With
Side inlet: Without Without Without
Fits: Unit 2011.0200 Unit 2011.0200 Unit 2011.0200
Item no.: 2411.0050 2411.0075 2412.0075
EAN no.*: 6604 6611 6628
D195
D75
89
126
35230
D128
106
162
87139
196 D12
8
193
3599
75
D128
162
87139
196
173
D12
8
193
3599
75
D128
162
87139
196
173
Front Opstalt/Front Elevation/Frontansicht
Side Opstalt/Side Elevation/Seitenansicht
D195
D75
89
126
35230
D128
106
162
87139
196
50
D50
D205D128
106
76
126
35210
162
87139
196
50
D50
D205D128
106
76
126
35210
162
87139
196
(See the measurement specifications for the selected drain unit). The construction height indicated may vary by 3 mm due to manufacturing tolerances.NOTE!
*570769200xxxx
31
32
A C C ES S O R IES | L INE
STRAINER WATER TRAP WATER TRAP ODOUR BARRIER RISER PIECE
1810.0010 1820.0040 1820.0010 1820.0030 35 mm 55 mm
Simplifies daily floor
drain maintenance.
Prevents water trap
becoming clogged.
Fits outlet units:
1411.0050/1411.0075/
1412.0075/1413.0075/
1414.0075/1415.0050
Meets capacity
and self-cleaning
requirements accor-
ding to EN 1253 (the
common European
standard for floor
drains) and is
VA approved.
Can easily be
removed from the
outlet unit using
the mounted hook,
then separated and
cleaned.
Fits outlet units:
1401.0050/1401.0075/
1402.0075/05.0050/
1403.0075/1404.0075
Meets capacity
and self-cleaning
requirements accor-
ding to EN 1253 (the
common European
standard for floor
drains) and is
VA approved.
Can easily be
removed from the
outlet unit, disas-
sembled without
tools, and cleaned.
Fits outlet units:
1311.0032/1311.0050/
1312.0050/1312.0075/
1417.0050
Has automatic
odour barrier
instead of water
trap so it cannot
dry out.
The odour barrier
can be removed and
cleaned.
Note: The odour
barrier is VA
approved.
Plced between the drain
unit and the outlet unit.
Suitable for very deep
placement of outlet unit.
Usage: Line drain Line drain Line drain Line drain Line drain Line drain
Model: 1810 1820 1820 1820 H 35 mm H 55 mm
Materials: Stainless steel Plastic (PP) Plastic (PP) Plastic (PP) Plastic (PPS) Plastic (PPS)
Surface: Brushed - - - - -
Gasket: - TPE TPE TPE EPDM EPDM
Item no.: 1810.0010 1820.0040 1820.0010 1820.0030 1830.0035 1830.0055
EAN no.*: 2446 8011 2439 6710 3436 3443
*570769200xxxx
33
PLUG HOOK SHOWER WIPER
1890.0000 1840.0000 5300.0000
For testing the
wetroom solution
for leaks before
laying tiles. Placed
in the drain grate.
Fill the shower
niche with 20 mm
water and allow to
stand for 24 hours
to test the seal.
Hook to lift the
water trap out of
the outlet unit.
Can be used on
line and corner
models.
Shower wiper
for cleaning the
shower cubicle.
Line drain Corner/Line -
1890 1840 5300
Plastic (PP) Plastic/steel Steel/rubber
- - Brushed
TPE - -
1890.0000 1840.0000 5300.0000
9513 6802 8219
A C C ES S O R IES | L INE
34
35
STRAINER WATER TRAP ODOUR BARRIER RISER PIECE
2811.0010 2821.0020 2821.0030 2830.0095
Simplifies daily
floor drain
maintenance.
Prevents water
trap becoming
clogged.
Fits outlet units:
2411.0050/2411.0075/
2412.0075
Meets capacity
and self-cleaning
requirements
according to EN
1253 (the common
European standard
for floor drains) and
is VA approved.
Can easily be
removed from the
outlet unit, disas-
sembled without
tools, and cleaned.
Fits outlet units:
2311.0032/2311.0050/
2415.0032/2415.0050
Has automatic
odour barrier
instead of water
trap so it cannot
dry out.
The odour barrier
can be removed
and cleaned.
Placed between
the drain unit and
the outlet unit.
Suitable for very
low placement of
outlet unit.
1 pcs. Ø 40 mm
side inlet (can
be opened if
required)
Note: Cannot
be combined
with water trap
2821.0020.
Corner drain Corner drain Corner drain Corner drain
2811 2821 2821 H 95 mm
Stainless steel Plastic (PP) Plastic (PP) Plastic (PP)
Brushed - - -
- TPE TPE EPDM
2811.0010 2821.0020 2821.0030 2830.0095
6666 6673 6680 6697
A C C ES S O R IES | C O R NER
36
270 10137
H
193
270
18
270 10137
H
193
270
18
Frame height (H) = tile thickness + approx. 2 mm for tile mortar and membrane.
*Frame width = 19 mm incl. 2 mm gap to rear flange
= 80 mm incl. 2 mm gap to rear flange
Frame height (H) = tile thickness + approx. 2 mm for tile mortar and membrane.
NOTE! NOTE!
C L A S S I C L INE F R A ME | WA L L SpecifikationerMateriale: Rustfrit stål (AISI 304)
Overflade: Børstet
Indlæg: Kunststof
(H)*
2
Cross-section of outlet unit with frame and grating. *Height of frame.
LINE 1500 CORNER 2500
The height of the frame (8, 10 or 12 mm) depends on the thickness of the floor tile. The rubber insert ensures
accurate fitting inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame.
The frame is mandatory and has a double function – to support the grating and provide a perfectly flush finish
with the tile/tile brick.
Usage: Line drain Corner drain
Length model: 300* 700* 800* 900* 1000* 1200* 200*
Length (L): 315 mm 695 mm 795 mm 895 mm 995 mm 1,195 mm L1: 270/L2: 193 mm
Fits: Unit 1004 Unit 1001, 1002, 1003, 1004, 1100, 5002, 5003 Unit 2011
Item no.:8 mm
(H)
1500.0308 1500.0708 1500.0808 1500.0908 1500.1008 1500.1208 2501.0208
EAN no.: 3245 3276 3306 3337 3368 3399 2606
Item no.:10 mm
(H)
1500.0310 1500.0710 1500.0810 1500.0910 1500.1010 1500.1210 2501.0210
EAN no.: 3252 3283 3313 3344 3375 3405 2613
Item no.:12 mm
(H)
1500.0312 1500.0712 1500.0812 1500.0912 1500.1012 1500.1212 2501.0212
EAN no.*: 3269 3290 3320 3351 3382 3412 2620
*Please note installation dimensions!
19
19*
10 (H)
80*
(L)
*570769200xxxx
37
(L)
51
3
191
3
137
Frame height (H) = tile thickness + approx. 2 mm for tile mortar and membrane.
Classic
Column
C L A S S I C L INE G R AT IN G SpecificationsMaterials: Stainless steel (AISI 304)
Surface: Brushed
Dimensions: 3 mm solid
LINE 1600 CORNER 2600
The grating is placed on a countersunk bearing inside the frame to ensure a precise fit.
Can only be used with ClassicLine frame.
Usage: Line drain Corner drain
Length 300* 700* 800* 900* 1000* 1200* 200*
Length (L): 280 mm 660 mm 760 mm 860 mm 960 mm 1,160 mm 191 mm
Item no.:
Classic1601.0300 1601.0700 1601.0800 1601.0900 1601.1000 1601.1200 2601.0200
EAN no.*: 2231 1098 1104 1111 2255 2279 2651
Item no.:
Column1602.0300 1602.0700 1602.0800 1602.0900 1602.1000 1602.1200 2602.0200
EAN no.*: 2286 1128 1135 1142 2309 2323 2668
Item no.:
Inca1603.0300 1603.0700 1603.0800 1603.0900 1603.1000 1603.1200 -
EAN no.*: 2330 1159 1166 1173 2354 2378 -
Item no.:
Square1604.0300 1604.0700 1604.0800 1604.0900 1604.1000 1604.1200 -
EAN no.*: 2385 1180 1197 1203 2408 2422 -
Item no.:
Stripe1605.0300 1605.0700 1605.0800 1605.0900 1605.1000 1605.1200 -
EAN no.*: 2897 2910 2927 2934 2941 2965 -
Item no.:Anni-
versario
1606.0300 1606.0700 1606.0800 1606.0900 1606.1000 1606.1200 2603.0200
EAN no.*: 8226 8233 8240 8257 8264 8271 9322
Classic Column Inca Square Stripe Anniversario
38
39
Anniversario Anniversario
Column
ClassicClassic
Column
*570769200xxxx
C L A S S I C L INE S O A P S HEL F SpecificationsMaterials: Stainless steel (AISI 304)
Surface: Brushed
LINE 1850 CORNER 2850
Soap shelf incl. grating and installation set.
Designed for insertion in tile joint or screw mounting into existing shower cubicle.
For corner installation only.
Usage: Wall Wall
Length model: 300* 200*
Length (L)*: 315 mm 288/204 mm
Item no.:
Classic1850.0301 2850.0201
EAN no.*: 6369 6383
Item no.:
Column1850.0302 2850.0202
EAN no.*: 6376 6390
Varenr.:Anniver-
sario
1850.0306 2850.0206
VVS nr.: 9377 9346
*Please note installation dimensions!
315
315
86
Plan/Plan/Draufsicht
Front Opstalt/Front Elevation/Frontansicht Side Opstalt/Side Elevation/Seitenansicht
315
315
86
Plan/Plan/Draufsicht
Front Opstalt/Front Elevation/Frontansicht Side Opstalt/Side Elevation/Seitenansicht
288
204
40
(H)
123
173
173
Cross-section of drain unit without frame/ with Panel in brushed stainless steel.
(H)
142
201
201
Cross-section of drain unit without frame/ with Panel in brushed stainless steel.
NB! Vær opmærksom på, at armaturet skal installeres 6 mm lavere end resten af gulvet for at opnå, at den påklæbede flise på Custom basen kommer i samme niveau
270 10137
H
193
270
18
270 10137
H
198
270
186
270 10137
H
193
270
18
270 10137
H
198
270
186
(H)
123
173
173
6 6
6
6 6
6
6 6
6
*570769200xxxx
SpecificationsMaterials: Stainless steel (AISI 304)
Surface: Brushed
Heightener set: Plastic (POM)
HI G HL INE PA NEL | C O R NER
Without frame With frame Without frame
HIGHLINE CORNER | CUSTOM HIGHLINE CORNER
Glue own material such as matching
floor tile on the base to complete
the solution. The Custom solution is
placed directly inside the unit.
The frame is optional but is designed to emphasise the exclusive design
of the floor drain.
The height of the frame (10, 12 or 25 mm) depends on the thickness
of the floor tile.
Exclusive frame design with 4 mm solid stainless steel surface.
Usage: Corner drain Corner drain
Length model: Custom Panel excl. frame Panel incl. frame
Length model: 200 200 200 200 200 200
Height: – – 10 mm 12 mm 15 mm 25 mm
Item no.: 2950.0200 2920.0201 2911.0210 2911.0212 2911.0215 2911.0225
EAN no.*: 9384 6772 7038 7045 7052 7069
41
Frame height (H) = tile thickness + approx. 2 mm for tile mortar and membrane. Without use of frame: air gap between panel and floor tile = 6 mm.
*Frame width = 19 mm incl. 2 mm gap to rear flange
= 76 mm incl. 2 mm gap to rear flange
NOTE!
*570769200xxxx
HI G HL INE F R A ME | L INE | WA L L SpecificationsMaterials: Stainless steel (AISI 304)
Surface: Brushed
Insert: Synthetic material
LINE 1910
The frame is optional but is designed to emphasise the exclusive design of the floor drain.
The height of the frame (10, 12 or 25 mm) depends on the thickness of the floor tile.
Exclusive frame design with 4 mm solid stainless steel surface.
Insert ensures accurate fitting inside the unit.
Usage: Line drain
Length model: 300* 700* 800* 900* 1000* 1200*
Length (L)*: 315 mm 695 mm 795 mm 895 mm 995 mm 1,195 mm
Fits unit: 1004 1001, 1002, 1003, 1004, 1100, 5002, 5003
Item no.:10 mm
(H)
1910.0310 1910.0710 1910.0810 1910.0910 1910.1010 1910.1210
EAN no.*: 4242 4259 4266 4273 4280 4297
Item no.:12 mm
(H)
1910.0312 1910.0712 1910.0812 1910.0912 1910.1012 1910.1212
EAN no.*: 4303 4310 4327 4334 4341 4358
Item no.:15 mm
(H)
1910.0315 1910.0715 1910.0815 1910.0915 1910.1015 1910.1215
EAN no.*: 4365 4372 4389 4396 4402 4419
Item no.:25 mm
(H)
1910.0325 1910.0725 1910.0825 1910.0925 1910.1025 1910.1225
EAN no.: 4426 4433 4440 4457 4464 4471
*Please note installation dimensions!
25
19*
8 (H)
76*
(L)
HIGHLINE CORNER | CUSTOM HIGHLINE CORNER
Glue own material such as matching
floor tile on the base to complete
the solution. The Custom solution is
placed directly inside the unit.
The frame is optional but is designed to emphasise the exclusive design
of the floor drain.
The height of the frame (10, 12 or 25 mm) depends on the thickness
of the floor tile.
Exclusive frame design with 4 mm solid stainless steel surface.
Usage: Corner drain Corner drain
Length model: Custom Panel excl. frame Panel incl. frame
Length model: 200 200 200 200 200 200
Height: – – 10 mm 12 mm 15 mm 25 mm
Item no.: 2950.0200 2920.0201 2911.0210 2911.0212 2911.0215 2911.0225
EAN no.*: 9384 6772 7038 7045 7052 7069
42
1 2 5 15
(L)
37
*570769200xxxx
SpecificationsMaterials: Stainless steel (AISI 304)/safety glass
Surface: Brushed/frosted
Heightener set: Plastic (PE)
Heightener set
H: 1, 2, 5, 15 mm.
Adjust height for Panel when floor tile is over 10 mm thick.
Installed between panel and rail.
Cross-section of drain unit with frame and Panel in brushed stainless steel.
HI G HL INE PA NEL | L INE
With frame With frame
LINE 1920 | PANEL
Choose between solid brushed stainless steel or frosted glass.
The set consists of a panel, rail, heightener set and screws. The set must be assembled before mounting.
The Panel solution is placed directly inside the unit, where the shape of the rail ensures a precise fit.
Should be installed with HighLine frame (see frame p. 39).
Set includes 6 mm tile template, which is used as a distance piece when mounting without a frame.
Usage: Line drain
Length 300* 700* 800* 900* 1000* 1200*
Length with/without frame (L)*: 253/315 mm 633/695 mm 733/795 mm 833/895 mm 933/995 mm 1133/1,195 mm
Item no.: Brushed stainless steel
1920.0300 1920.0700 1920.0800 1920.0900 1920.1000 1920.1200
EAN no.*: 4488 4495 4501 4518 4525 4532
Item no.: frosted glass White
1930.0300 1930.0700 1930.0800 1930.0900 1930.1000 1930.1200
EAN no.*: 6819 6826 6833 6840 6857 6864
Item no.: frosted glass Black
1931.0300 1931.0700 1931.0800 1931.0900 1931.1000 1931.1200
EAN no.*: 6871 6888 6895 6901 6918 6925
43
(L)
(H)
37
1 2 5 15
SpecificationsMaterials: Stainless steel (AISI 304)
Surface: Brushed
Heightener set: Plastic (PE)
Heightener set
H: 1, 2, 5, 15 mm.
Adjust height for Cassette when floor tile is over 10 mm thick.
Installed between cassette and rail.
Cross-section of drain unit with frame and Cassette.
With frame
LINE 1940 | CASSETTE
The set consists of a cassette, rail, heightener set and screws. The set must be assembled before mounting.
Available in 10, 12, 15 and 25 mm heights, (depending on the thickness of the floor tile).
Can be supplemented with own material such as matching floor tile, terrazzo etc.onto which it is mounted.
The Cassette solution is placed directly inside the unit, where the shape of the rail ensures a precise fit.
Should be installed with HighLine frame (see frame p. 39).
Set includes 6 mm tile template, which is used as a distance piece when mounting without a frame.
Usage: Line drain
Length 300* 700* 800* 900* 1000* 1200*
Length with/without
frame L)*:253/315 mm 633/695 mm 733/795 mm 833/895 mm 933/955 mm 1133/1,195 mm
Item no.:10 mm
(H)
1940.0310 1940.0710 1940.0810 1940.0910 1940.1010 1940.1210
EAN no.*: 5089 5096 5102 5119 5126 5133
Item no.:12 mm
(H)
1940.0312 1940.0712 1940.0812 1940.0912 1940.1012 1940.1212
EAN no.*: 5140 5157 5164 5171 5188 5195
Item no.:15 mm
(H)
1940.0315 1940.0715 1940.0815 1940.0915 1940.1015 1940.1215
EAN no.*: 5201 5218 5225 5232 5249 5256
Item no.:25 mm
(H)
1940.0325 1940.0725 1940.0825 1940.0925 1940.1025 1940.1225
EAN no.*: 5263 5270 5287 5294 5300 5317
*Please note installation dimensions!
HI G HL INE C A S S E T T E | L INE
*570769200xxxx
44
(L)
37
1 2 5 15
SpecificationsMaterials: Stainless steel (AISI 304)
Surface: Brushed
Heightener set: Plastic (PE
HI G HL INE C U S T O M | L INE
Heightener set
H: 1, 2, 5, 15 mm.
Adjust height of Custom base if the tiles on the base do not have the same thickness as the tiles on the rest of the floor.
Installed between base and rail.
Cross-section of drain unit with frame and Custom (with own materials).
Cross-section of drain unit without frame and Custom (with own materials).
Without use of frame: gap between Custom and floor tile = 6 mm.
Without frame With frame
LINE 1950 | CUSTOM
The set consists of a Custom base, rail, heightener set and screws. The set must be assembled before mounting.
Glue own material such as matching floor tile on the base to complete the solution.
The Custom solution is placed directly inside the unit, where the shape of the rail ensures a precise fit.
Can be installed with or without HighLine frame (see frame p. 39).
Set includes 6 mm tile template, which is used as a distance piece when mounting without a frame.
Usage: Line drain
Length model: 300* 700* 800* 900* 1000* 1200*
Length with/without frame 253/315 mm 633/695 mm 733/795 mm 833/895 mm 933/995 mm 1133/1,195 mm
Item no.: 1950.0300 1950.0700 1950.0800 1950.0900 1950.1000 1950.1200
EAN no.*: 5324 5331 5348 5355 5362 5379
*Please note installation dimensions!
*570769200xxxx
45
2
146103
6 43
6 10 3
6
14
6
6 mm
6 mm
6 mm
1
3
2
6
4
14
The Custom solution consists of a rail and
a stainless steel base. The shape of the rail
ensures accurate fitting inside the unit.
The rail and the base are screwed together
after which your choice of tile can then be laid.
A heightener set is included for height adjust-
ment of the base.
INSTALLATIONHIGHLINE CUSTOMEXAMPLE WITH 10 MM TILE
Floor tile is cut to achieve a gap between the tile on
the base and the other tiles of at least 6 mm.
Custom rail and base seen from below.
BASE SIDES
Lay own tiles on base with overhang of max. 20 mm
(depending on tile thickness and type of tile.
In this example the overhang is 14 mm).
BASE, LONG SIDE
Lay own tiles on base with overhang of max. 10 mm
(depending on tile thickness and type of tile.
In this example the overhang is 6 mm).
1.
2.
3.
4.
Recommended glue
Tile(10 mm)
Glue (1 mm)
Custom Panel (5 mm)
LENGTH SECTION
Riserpiece
Custom baseOverhang
Riserpiece
Overhang
Tile(10 mm)
Tile
Tile
Tile mortar(3 mm)
Tile mortar
Glue
CROSS-SECTION
The products are shown in random orde
Manufacturer Product
Bostik • Maxibond
• Maxibond X-TREME
• Clearbond
Danalim • Montage Ekstra 292
• Turbo tack 291
Henkel • Pattex no more nails
Novatech • Tec7
• Trans7
Rail
46
65
40
143
19
3658
65
(R)
(A)
(B)19
60 - 165
Brusevæg, udløbshus, ramme og rist/panel bestilles separat! 4,5
6810
2085
Glas
(Fald)
Pakning 1 mm
2104
54
*570769200xxxx
Shower screen, outlet unit, frame and grating/panel are not included!
packing 1 mm
slope
glass
S H O W ER L INE | F I X ED M O D U L
FIXED MODULE 5002 | RIGHT ALIGNED SHOWER SCREEN
The fixed module has a built-in slope so the floor in the shower cubicle slants the correct two % downward
to the floor drain.
The shower niche is framed by flanges on three sides and increases wet room safety.
The shower screen is installed in the track of the fixed module to eliminate risk of loosening over time.
Combine with: outlet unit, frame, grating/panel and shower screen.
Fixed module Length model (A): 800* 900* 1000*
*Installation dimensions (A): 863 mm 963 mm 1063 mm
*Installation dimensions (D): 901 mm 1001 mm 1101 mm 1301 mm 901 mm 1001 mm 1101 mm 1301 mm 1001 mm 1101 mm 1301 mm
Shower screen 800 mm 900 mm 1000 mm 1200 mm 800 mm 900 mm 1000 mm 1200 mm 900 mm 1000 mm 1200 mm
Frame (R): 795 mm 895 mm 995 mm
Slope: 19 mm 19 mm 19 mm
Center (C): 401 mm 451 mm 501 mm 601 mm 401 mm 451 mm 501 mm 601 mm 451 mm 501 mm 601 mm
Height (H): 18 mm 19 mm 20 mm
Item no.: 5002.0808 5002.0809 5002.0810 5002.0812 5002.0908 5002.0909 5002.0910 5002.0912 5002.1009 5002.1010 5002.1012
EAN no.*: 9520 7205 7212 7229 9544 7236 7243 7250 7267 7274 7281
47
NOTE!
19(Fald)
(D)
(A)
(C)
60 -
165
Brusevæg, udløbshus, ramme og rist/panel bestilles separat!
65801, 901, 1001801, 901, 1001
(R)
(B)
Total construction height (excl. frame/grating) = height of the outlet unit + (H).(H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.
Shower screen, outlet unit, frame and grating/panel are not included!
HighLine
ClassicLine+
Specifications
Materials: 1.5 mm stainless steel (AISI 304)Surface: PickledMembrane: Lubrication membrane or sheet membranes.Floor construction: Concrete/woodFlooring: Tiles/tile bricks
*Please note installation dimensions!
FIXED MODULE 5003 | LEFT ALIGNED SHOWER SCREEN
The fixed module has a built-in slope so the floor in the shower cubicle slants the correct 2 %
downward to the floor drain.
The shower niche is framed by flanges on three sides and increases wet room safety.
The shower screen is installed in the track of the fixed module to eliminate risk of loosening over time.
Combine with: outlet unit, frame, grating/panel and shower screen.
800* 900* 1000*
863 mm 963 mm 1063 mm
901 mm 1001 mm 1101 mm 1301 mm 901 mm 1001 mm 1101 mm 1301 mm 1001 mm 1101 mm 1301 mm
800 mm 900 mm 1000 mm 1200 mm 800 mm 900 mm 1000 mm 1200 mm 900 mm 1000 mm 1200 mm
795 mm 895 mm 995 mm
19 mm 19 mm 19 mm
401 mm 451 mm 501 mm 601 mm 401 mm 451 mm 501 mm 601 mm 451 mm 501 mm 601 mm
18 mm 19 mm 20 mm
5003.0808 5003.0809 5003.0810 5003.0812 5003.0908 5003.0909 5003.0910 5003.0912 5003.1009 5003.1010 5003.1012
9537 7298 7304 7311 9551 7328 7335 7342 7359 7366 7373
48
Afløbsarmatur, udløbshus, ramme og rist/panel bestilles separat!
(D)Brusevæg
(900, 1000, 1200)
57
30 8143
68
Pakning 1 mm
57
2104
10 Glas
58
54
60 -
165
4,5
F
Drain unit, outlet unit, frame and grating/panel are not included!
packing 1 mm
shower screen
(900, 1000, 1200)
glass
*570769200xxxx
HighLine
ClassicLine+
Specifications
Materials: 1.5 mm stainless steel (AISI 304)Surface: PickledMembrane: Lubrication membrane or sheet membranesFloor construction: Concrete/woodFlooring: Tiles/tile bricks
S H O W ER L INE | F L E X IB L E M O D U L E
FLEXIBLE MODULE 5000
Can be combined with units 1002/1003/1004 in all lengths.
The flexible module has a built-in slope so the floor in the shower cubicle slants the correct
2 % downward to the floor drain.
The shower niche is framed by flanges on two sides and increases wet room safety.
The shower screen is installed in the track of the fixed module to eliminate risk of loosening over time.
Combine with: outlet unit, drain unit, frame, grating/panel and shower screen.
Model: 900* 1000* 1200*
Shower screen depth: 900 mm 1,000 mm 1,200 mm
*Installation depth (D) 998 mm 1,098 mm 1,302 mm
Slope: 17 19 24
Item no.: 5000.0900 5000.1000 5000.1200
EAN no.*: 7380 7397 7403
*Please note installation dimensions!
49
G L A S S L INE | S H O W ER B A S E
GLASSLINE | SHOWER BASE
The shower base is made of stainless steel and tempered glass.
The base is decorated with a striped anti-slip pattern which matches the pattern of the GlassLine shower screen
The base is installed as one large tile and fits ShowerLine, which ensures there is a correct 2% slope
towards the drain.
Design: Stripe
Length model: 800* 900 1000
Shower screen (D): 900 mm 1000 mm 1200 mm 900 mm 1000 mm 1200 mm 900 mm 1000 mm 1200 mm
*Installation depth (D) 795 /813 mm 795 /913 mm 795 /1113 mm 895/813 mm 895/913 mm 895/1113 mm 995/813 mm 995/913 mm 995/1113 mm
Height (H): 10,5 mm 10,5 mm 10,5 mm
Item no.: 5210.0809 5210.0810 5210.0812 5210.0909 5210.0910 5210.0912 5210.1009 5210.1010 5210.1012
EAN no.*: 7625 7632 7649 7656 7663 7670 7748 7786 7885
800, 900, 1000
(D
1)
(D
)
Edel
stah
l ges
chlif
fen
Bedr
ucku
ng
whi
te-g
las
Gla
s ES
G
Schl
iffse
ite
0,50 Alufolie
0,7
0 Fo
lie (S
chol
lgla
s) 0,50
10,
40
Fase
0,5
x45°
um
lauf
end
Schu
tzw
inke
l 8
1
50
*570769200xxxx
Specifications
Materials: 8 mm safety float glassSurface: anti-slip pattern
50 G L A S S L INE | S H O W ER S C R EEN S
Design: Stripe Design: Column Design: Random
GLASSLINE | RIGHT ALIGNED SHOWER SCREENS
10 mm safety glass.
The glass surface is treated with Cleantec nano technology, making it water-repellent, less susceptible to
limescale and easier to clean.
Applied screen print decoration on the outer surface.
No visible screws or fittings in the finished result.
Design: Design: Stripe Design: Column Design: Random
Model: 900* 1000* 1200* 900* 1000* 1200* 900* 1000* 1200*
Depth (D): 900 mm 1,000 mm 1,200 mm 900 mm 1,000 mm 1,200 mm 900 mm 1,000 mm 1,200 mm
*Installation dimensions: 1,002 mm 1,102 mm 1,302 mm 1,002 mm 1,102 mm 1,302 mm 1,002 mm 1,102 mm 1,302 mm
Height: 2,104 mm 2,104 mm 2,104 mm
Weight incl. 55 kg 65 kg 79,5 kg 55 kg 65 kg 79,5 kg 55 kg 65 kg 79,5 kg
Item no.: 5110.0902 5110.1002 5110.1202 5120.0902 5120.1002 5120.1202 5130.0902 5130.1002 5130.1202
EAN no.*: 7441 7458 7465 7502 7519 7526 7564 7571 7588
Stripe Column Random
58(D: 900, 1000, 1200)
(Se øvrige mål s. 49, 50)
2104
26
6845
*570769200xxxx
(see page
49, 50)
51Specifications
Materials: stainless steel (AISI 304),10 mm safety float glassDecoration: screen print
*Please note installation dimensions!
2104
D: 900, 1000, 120026
58
Stripe Column Random
58
(D: 900, 1000, 1200)
2104
26
Transparent
Design: Stripe Design: Column Design: Random Design: Transparent
GLASSLINE | LEFT ALIGNED SHOWER SCREENS GLASSLINE | SHOWER SCREEN
10 mm safety glass.
The glass surface is treated with Cleantec nano technology, making it water-repellent,
less susceptible to limescale and easier to clean.
Applied screen print decoration on the outer surface.
No visible screws or fittings in the finished result.
10 mm safety glass.
Both sides have been given a hydrophobic surface treatment with nano technology (Cleantec) so the shower screen can be placed to the right or the left.
No visible screws or fittings in the finished result.
Design: Stripe Design: Column Design: Random Design: Transparent
900* 1000* 1200* 900* 1000* 1200* 900* 1000* 1200* 800* 900* 1000* 1200*
900 mm 1000 mm 1200 mm 900 mm 1000 mm 1200 mm 900 mm 1000 mm 1200 mm 800 mm 900 mm 1000 mm 1200 mm
1002 mm 1102 mm 1302 mm 1002 mm 1102 mm 1302 mm 1002 mm 1102 mm 1302 mm 902 mm 1002 mm 1102 mm 1302 mm
2104 mm 2104 mm 2104 mm 2104 mm
55 kg 65 kg 79,5 kg 55 kg 65 kg 79,5 kg 55 kg 65 kg 79,5 kg 50 kg 55 kg 65 kg 79,5 kg
5110.0903 5110.1003 5110.1203 5120.0903 5120.1003 5120.1203 5130.0903 5130.1003 5130.1203 5100.0800 5100.0900 5100.1000 5100.1200
7472 7489 7496 7533 7540 7557 7595 7601 7618 9568 7410 7427 7434
52
53
(glas dimension without hinge)
SHOWER DOOR
THE SHOWER DOOR IS ADAPTED TO THE HEIGHT AND WIDTH OF UNIDRAIN’S GLASSLINE SHOWER WALL.
MUST BE COMBINED WITH UNIDRAIN® TOP RAIL.
Tile thickness incl. tile adhesive: 8-12 mm
The surface is treated with Cleantec nanotechnonology on both sides
Supplied with two hinges and a sealing strip
Model: 800* 900* 1000*
*Depth 776 mm 876 mm 976 mm
Height: 2023 mm
Item no.: 5400.0800 5400.0900 5400.1000
EAN no.*: 8479 8486 8462
Specifications
Materials: stainless steel8 mm safety float glass
2023
GlassLine topstang
GlassLine brusevæg
GlassLine topstang
Brusedøren flugter med stålprofilen på
GlassLine brusevægen
776/ 876/ 976
5
200
200
10
G L A S S L INE | SHOWER DOOR
The shower door is flush with the steel profile of the Glassline shower screen
GlassLine top rail
GlassLine shower door
GlassLine top rail
54
40
200
100100
4015
100
700 / 800 / 900 / 1000 / 1200
*570769200xxxx
G L A S S L INE | S H O W ER S C R EEN S Specifications
Materials: stainless steel (AISI 304)
TOP RAIL 5310
For finishing the shower screen.
A top rail is recommended for stabilising shower screens measuring 1,200 mm or more.
The top rail is available in one length and can be adjusted to fit the individual shower cubicle.
Usage: For shower screen For shower screen
Fits: Right aligned shower screens Left aligned shower screens
Materials: Brushed stainless steel Brushed stainless steel
Fits length model: 700-1200 700-1200
Width: 40 mm 40 mm
Height:: 15 mm 15 mm
Item no.: 5310.1202 5310.1203
EAN no.*: 8158 8295
55
4015
700 / 800 / 900 / 1000 / 1200
Specifications
Materials: stainless steel (AISI 304),10 mm safety float glass
TOP RAIL 5320
For finishing the shower screen.
A top rail is recommended for stabilising shower screens measuring 1,200 mm or more.
For shower screen For shower screen
Right aligned shower screens Left aligned shower screens
Brushed stainless steel, glass Brushed stainless steel, glass
700 800 900 1000 1200 700 800 900 1000 1200
40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm
15 mm 15 mm 15 mm 15 mm 15 mm 15 mm 15 mm 15 mm 15 mm 15 mm
5320.0702 5320.0802 5320.0902 5320.1002 5320.1202 5320.0703 5320.0803 5320.0903 5320.1003 5320.1203
8165 8172 8189 8196 8202 8301 8318 8325 8332 8349
56 M O D U L 110 0
Module 1100 is a customised modular line drain system that is manufactured to order. Modular line drains
can be many meters long and are therefore ideal for institutions, changing rooms and large bathrooms.
Outlet units, frames and gratings are taken from the permanent range. This means that frames and
gratings are placed end-to-end, making maintenance easy and manageable. A number of outlet units are
also used to ensure as high capacity and low construction height as possible.
Module 1100 for mid-floor placement is available upon request.
Examples of solutions
Inward corner Outward corner
One module with flex frames
Maintain the vertical end flanges, even those with odd dimensions. Extra space can be filled out with flex frames at the sides.
Two modules with angle and flex frame
Allow the modular line drain to follow the corners in the shower area so that showers can be installed in several walls.
Two modules without flex frames
A modular line drain system that covers double the length of a standard model when not extended with flex frames.
Two modules with flex frames
If the modular line drain has odd measurements, the extra space can be filled out with symmetrically placed flex frames.
Welded together into one component prior
to delivery!
A: Grating or panelB: FrameC: Flex frameC: Drain unit D: Outlet unit A
AAB
D
E
CB
D
C
E
B
D
E
C
57
YOU CAN CALCULATE YOUR OWN modular line drain system and
find the measurement that best fits your individual bathroom.
• Enter your bathroom measurements and
choose your combination of modules
• Choose a ClassicLine or HighLine solution
• Choose an outlet unit
Immediately view a design showing the
specifications of your individual line drain.
Send your calculations to us and we will
prepare an estimate for you.
www.unidrain.dk/modul1100
58 SpecificationsMaterials: Stainless steel (AISI 304)
Surface: Brushed
Flex frames are installed along with floor tiles!
A: Flex frame end piece/middle piece
B: Flex frame inward corner
C: Flex frame outward corner
F L E X F R A MES
ClassicLine High Line
FLEX FRAMES
Flex frames are used to extend the visible lenghth of the floor drain. The are laid end-to-end and installed using
tile mortar, so there is no need to cut small pieces of tile.
Flex frames can be used for:
- Drain systems from the permanent range, allowing the module unit to be customised by down to a 10 mm jump.
- Module 1100 line drains that cover the distance between frames and gratings to provide a visually uninterrupted result.
Usage: Line drain Line drain
Model: ClassicLine HighLine
Height: H 8 mm H 10 mm H 12 mm H 10/12/15/25 mm
Length: Item no.: EAN no.*: Item no.: EAN no.*: Item no.: EAN no.:* Item no.: EAN no.*:
A:
10 mm 1510.0108 3771 1510.0110 3788 1510.0112 3795 1911.0110 6420
20 mm 1510.0208 3801 1510.0210 3818 1510.0212 3825 1911.0210 6437
30 mm 1510.0308 3832 1510.0310 3849 1510.0312 3856 1911.0310 6444
40 mm 1510.0408 3863 1510.0410 3870 1510.0412 3887 1911.0410 6451
50 mm 1510.0508 3894 1510.0510 3900 1510.0512 3917 1911.0510 6468
60 mm 1510.0608 3924 1510.0610 3931 1510.0612 3948 1911.0610 6475
70 mm 1510.0708 3955 1510.0710 3962 1510.0712 3979 1911.0710 6482
80 mm 1510.0808 3986 1510.0810 3993 1510.0812 4006 1911.0810 6499
90 mm 1510.0908 4013 1510.0910 4020 1510.0912 4037 1911.0910 6505
100 mm 1510.1008 4044 1510.1010 4051 1510.1012 4068 1911.1010 6512
110 mm 1510.1108 4075 1510.1110 4082 1510.1112 4099 1911.1110 6529
120 mm 1510.1208 4105 1510.1210 4112 1510.1212 4129 1911.1210 6536
B corner 1530.1208 6963 1530.1210 6970 1530.1212 6987 1913.1210 6550
C corner 1520.0808 6932 1520.0810 6949 1520.0812 6956 1912.0810 6543
*570769200xxxx
59
60 F R EES TA ND IN G S Y S T EMD R A IN U NI T | L INE | F LO O R
61
HighLine
ClassicLine+
3002 3002 3004
Specifications
Materials: 1.5 mm stainless steel (AISI 304)Surface: PickledMembrane: Lubrication membrane or sheet membranes.Floor construction: AllFlooring: Tiles/tile bricks
Introduction Sides without wall flanges must comply with rules regarding min. distance to wall.
For line units placed against rear wall, we refer to series 1000 (see pages 18).
LINE 3002 LINE 3004
For shower cubicle with one solid wall.
The drain unit has one wall flange and three
floor flanges. Incl. Four height-adjustable feet
(120-220 mm). Note: see frames on page 62
For shower cubicles without fixed side walls.
The drain unit has four floor flanges.
Incl. Four height-adjustable feet (120-220 mm).
Note: see frames on page 62
Usage: Line drain Line drain
Wall flange: Left or right (can be turned 180˚ if necessary) None
Length model: 700* 900* 300* 700* 800* 900* 1000* 1200*
Length (L): 757 mm 957 mm 432 mm 812 mm 912 mm 1,012 mm 1112 mm 1312 mm
Center (C): 351 mm 451 mm 206 mm 396 mm 456 mm 496 mm 556 mm 656 mm
Height (H): 17 mm 19 mm 12 mm 17 mm 18 mm 19 mm 20 mm 22 mm
Frame (R): 695 mm 895 mm 315 mm 695 mm 795 mm 895 mm 995 mm 1195mm
Item no.: 3002.0700 3002.0900 3004.0300 3004.0700 3004.0800 3004..0900 3004.1000 3004.1200
EAN no.*: 6109 6116 6123 6130 7076 6147 7083 7090
*Note installation dimensions!
5720
8
(H)
208
(R)
54 71(H
)
86103
(L)
57
5720
8
(H)
208
(R)
54 71(H
)
86103
(L)
57
(L)
208
(R)
208
(H) 7354(H
)
86105
(L)
208
(R)
208
(H) 7354(H
)
86105
Total construction height (excl. frame/grating) = height of the outlet unit + (H).
(H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.
NOTE!
*570769200xxxx
62
8851
Frame height (H) = tile thickness + approx. 2 mm for tile mortar and membrane. NOTE!
*570769200xxxx
C L A S S I C L INE F R A ME | F LO O R
LINE 3500 | CLASSICLINE
The height of the frame (8, 10 or 12 mm) depends on the thickness of the floor tile.
The rubber insert ensures accurate fitting inside the unit. A countersunk bearing ensures that the
grating fits perfectly into the frame. (see gratings p. 35).
The frame is mandatory and has a double function – to support the grating and provide a perfectly
flush finish with the tile/tile brick.
Usage: Line drain
Length model: 300* 700* 800* 900* 1000* 1200*
Length (L): 315 mm 695 mm 795 mm 895 mm 995 mm 1195 mm
Fits: Unit 3004 Unit 3002, 3004 Unit 3004 Unit 3002, 3004 Unit 3004
Item no.:8 mm
(H)
3500.0308 3500.0708 3500.0808 3500.0908 3500.1008 3500.1208
EAN no.*: 6154 6185 8806 6215
Item no.:10 mm
(H)
3500.0310 3500.0710 3500.0810 3500.0910 3500.1010 3500.1210
EAN no.*: 6161 6192 8813 6222
Item no.:12 mm
(H)
3500.0312 3500.0712 3500.0812 3500.0912 3500.1012 3500.1212
EAN no.*: 6178 6208 8820 6239 8882
17
10
10 (H)
71
(L)
63
Frame height (H) = tile thickness + approx. 2 mm for tile mortar and membrane. Without use of frame: air gap between panel and floor tile = 6 mm.NOTE!
SpecificationsMaterials: Stainless steel (AISI 304)
Surface: Brushed
Insert: Synthetic material
LINE 3910 | HIGHLINE
The frame is optional but is designed to emphasise the exclusive design of the floor drain.
The height of the frame (10, 12 or 25 mm) depends on the thickness of the floor tile.
Exclusive frame design with 4 mm solid stainless steel surface. Insert ensures accurate fitting
inside the unit.
HighLine Panel, Cassette or Custom must be selected (see pages 40-42).
Usage: Line drain
Length model: 300* 700* 800* 900* 1000* 1200*
Length (L): 315 mm 695 mm 795 mm 895 mm 995 mm 1195 mm
Fits: Unit 3004 Unit 3002, 3004 Unit 3004 Unit 3002, 3004 Unit 3004
Item no.:10 mm
(H)
3910.0310 3910.0710 3910.0810 3910.0910 3910.1010 3910.1210
EAN no.*: 6246 6284 8899 6321 8936 8974
Item no.:12 mm
(H)
3910.0312 3910.0712 3910.0812 3910.0912 3910.1012 3910.1212
EAN no.*: 6253 6291 8905 6338 8943 8981
Item no.:15 mm
(H)
3910.0315 3910.0715 3910.0815 3910.0915 3910.1015 3910.1215
EAN no.*: 6260 6307 8912 6345 8950 8998
Item no.:25 mm
(H)
3910.0325 3910.0725 3910.0825 3910.0925 3910.1025 3910.1225
EAN no.*: 6277 6314 8929 6352 8967 9001
*Please note installation dimensions!
HI G HL INE F R A ME | F LO O R
25
8
8 (H)
65
(L)
*570769200xxxx
64
MATLINEThe Nordic climate is a challenge, with snow, rain, mud and slush for much of the year. In active family life, weather conditions often make it difficult to keep your home presentable all the time. The unidrain® MatLine system is a highly functional and elegant solution to an everyday problem. Use MatLine in the utility room or in the hall and connect it to the existing drain system so that anyexcess water drains away.
Strainer
Fitting FrameMat
Reinforcement
Concrete
Insulation
INSTALLATION DIRECTLY ON THE SEWER PIPE
INSTALLATION WITH OUTLET UNIT
MATLINE - AN INTELLIGENT MAT SYSTEM
Odour barrier
Outlet unit
FittingFrame
Mat
Reinforcement
Insulation
Concrete
67
A: MatB: FrameC: StrainerD: FittingE: Height-adjustable supports (accessory)
D
E
C
B
A
• S tylish Danish design
• Minimises dirt in the home
• Easy to clean
• Connects directly to drain
• Flexible system, where the height can be adjusted depending on the thickness of the floor tiles
• UV and chemical resistant nylon brushes that can withstand many years of normal use
• Intelligent brushes, straighten themselves after use
MatLine is useful and relevant in every building. The intelligent
mat system consists of four parts: A mat, frame, strainer and
fitting. A hook is supplied to make raising the mat easier.
The mat is flush with the surrounding floor and surrounded
by a slim steel frame in brushed stainless steel. There is a
strainer under the mat to catch sand and gravel.
Below that is the fitting, which is cast into the floor.
Height-adjustable supports are available to order to facilitate the
casting process.
68
SpecificationsMaterials: Stainless steel (AISI 304)
Surface: Brushed
Insert: Synthetic material
*Please note installation dimensions!
*570769200xxxx
MATLINE COMPLETE HEIGHT-ADJUSTABLE SUPPORTS
The complete MatLine includes grating, frame and
mat with nylon brushes fitted. A strainer and hook
(for lifting) are also included.
A complete MatLine set comes in two separate
packs according to the construction process, in
which the grating is installed first followed by the
frame and mat.
A pack of four adjustable feet is available as an optional
extra. The feet can be fitted during the installation
process when required.
Usage: Måtte (accessory) MatLine
Length model: 800 -
Dimension/ Frame: 500 x 800 mm -
Dimension/ Fitting: 619 x 918 mm -
Height: tile thickness: 8-25 mm 80 - 150 mm
Item no.: 6001.0800 6006.0000
EAN no.*: 9025 9315
M AT L INE
799
Ø 110
40
70
619
500
520
819
918
116
69
*570769200xxxx
M AT L INE
STRAINER NYLON BRUSHES – PACK OF 11 STEEL PANEL
The strainer is in stainless steel and
is placed in the grating over the drain.
The nylon brushes will need
replacing after several years of wear.
The original brushes are easy to
change and individual replacements
are available.
The steel panel on Matline can be
easily replaced.
Usage: parts parts parts
Length model: 800 800
Dimensions: Ø 110 mm L: 774 780 x 32 x 25
Materials: rustfri stål (AISI 304) Nylon (PA)/Polypropylen (PP) rustfri stål (AISI 304)
Item no.: 6005.0000 6001.0801 6003.0800
EAN no.*: 9087 9049 9063
70
MATLINE 2511.0075 MATLINE 2512.0075 ODOUR BARRIER 3820.0010
Horizontal outlet Ø 50 mm.
Can be rotated 360˚, which may
facilitate direction of pipework.
Horizontal outlet Ø 75 mm.
Can be rotated 360˚, which may
facilitate direction of pipework.
The odour barrier can be removed
and cleaned.
Usage: Matline drain Matline drain Matline
Outlet dimensions Ø 50 mm Ø 75 mm Ø 75 mm
Outlet direction: Horizontal Vertical Lodret
Capacity: 0,8 l/s 0,9 l/s 1,0 l/s
Water trap: without without -
Side inlet: without without -
Fits: Matline 6001.0800 Matline 6001.0800 2511.0075, 2512.0075
Item no.: 2511.0075 2512.0075 3820.0010
EAN no.*: 9483 9490 9506
78
ø108
D12
8
193
3599
75
D128
162
87139
196
173
D195
D75
D128
106
D195
D75
D128
106
O U T L E T U NI T | M AT L INE SpecificationsMaterials: Plastic (PP)
Gasket: EPDM
71
Edi
tion
3. U
nidr
ain
assu
mes
no
resp
onsi
bilit
y fo
r pr
inti
ng e
rror
s.70
0 U
K
Unidrain A/SFarum Gydevej 71
DK-3520 Farum
T +45 3910 1010F +45 3910 1020
info@unidrain.comwww.unidrain.com
Recommended