Understanding FTP BUPT/QMUL 2013-05-03. 2 Part1: Using telnet to learn FTP operations in passive...

Understanding FTP

BUPT/QMUL2013-05-03

2

Part1: Using telnet to learn FTP operations in passive mode

Steps:1. Using telnet to connect to given FTP server

$ telnet ftp.mayan.cn 21 2. login using username “mayan” and password “bupt”3. Input command “PASV”, calculate port number for data connections: port= p1×256+p2, p1 and p2 are taken from the server’s reply4. Using another terminal to set up data connection

$ telnet ftp.mayan.cn port5. Input command “LIST”

3

Part1: Using telnet to learn FTP operations in passive mode

c:\>telnet ftp.mayan.cn 21

In another command window, setting up data connection 30*256+251

4

In control connection:

In data connection:

5

in control connection

in data connection

Change to lab directory and list

6

Download lab2.pdf

in control connection

in data connection

7

FTP commands to try

USER PASS PWD CWD LIST RETR STOR (trying on local FTP server) TYPE QUIT …

8

Part2: Capture FTP commands and replies

Starting wiresharkset capture filter: tcp port 21 display filter: ftp

In your browser ftp://ftp.mayan.cnDownload a file, study the FTP commands and replies captured.

Active mode is used

9

Part3: Learn to use FTP user command(1)

10

Learn to use FTP user command(2)

11

User commands used-example D:\ftp-test> ftp ftp.mayan.cn 21

Input user name and password ftp> ls ftp> get fork.c ftp> ren fork.c fork.txt ftp> ls ftp> binary ftp> ascii ftp> quit

12

Control commands and replies used when logging in

13

Commands and replies used for ls

Commands and replies used for get

One data connection persists for one file transfer

14

The procedure of ls• Data connection establishment• Data transmission• Data connection close

15

Rename fork.c fork.txt

ls

binaryascii

Release control connection