TYPE D ORIFICE PLATE for Pressure Regulating Valves · ORIFICE PLATE Series 3010 Steam Pressure...

I Sinc

e 19

86

Manufacturers Of Steam Fired Specialty Equipment

ncorporatedEngineeringr

P.O. Box 473639, Charlotte, NC 28247 | Phone 704.940.1228 | Fax 704.940.1227 | www.therma�oengineering.com

NOISE ATTENUATORS : SERIES D

TYPE D ORIFICE PLATEfor Pressure Regulating Valves

Noise Attenuation Equipment is used to reduce unwanted or excessive noise that commonly occurs in pressure reducing stations.

TYPE D DIMENSION (A) – inchesPipe Size 150# Flange 300# Flange

2” 6 43/16

21/2” 7 415/16

3” 71/2 511/16

4” 9 615/16

6” 11 911/16

Note: Other sizes available. Consult factory.

TYPE D Dimensions

TYPE DORIFICEPLATE

Series 3010 Steam Pressure Reducing Valve

Sensing LineFor Regulator

TYPE D Typical Hook-up

TYPE D ORIFICE PLATE

304 Stainless Steel Construction

Noise Reduction Capability: 10 dBA

HOW IT WORKSThe Type D Ori�ce Plate with its drilled ori�ce pattern isinstalled after the pressure regulating valve to smooth outturbulence caused by the pressure drop across the regulator.Noise reduction levels of 10 dBA can typically be achieved.

INSTALLATIONThe Type D Ori�ce Plate is installed between ANSI �angesimmediately after the regulator. If the regulator is a �anged unit,the ori�ce plate is placed at the �ange outlet connection. Max. Temp.450˚F @ 300 PSIG

Series-DOri�ce Plate

FLOW

A DIa.

.75

Type D installedbetween flanges

FLOW

REG

ULAT

ING

VAL

VES

NOISE ATTENUATORS : SERIES TH

SERIES TH ACOUSTIC SILENCER

I Sinc

e 19

86

Manufacturers Of Steam Fired Specialty Equipment

ncorporatedEngineeringr

P.O. Box 473639, Charlotte, NC 28247 | Phone 704.940.1228 | Fax 704.940.1227 | www.therma�oengineering.com

for Pressure Regulating Valves

HOW IT WORKSThe Series-TH Acoustic Silencer incorporates a Dual Diffusertube design. The inner tube has a drilled ori�ce pattern andthe outer tube contains an integral layer of sound absorbinginsulation. Noise reduction levels of 20-30 dBA can typicallybe achieved.

INSTALLATIONThe Series-TH Diffuser Tube should be installed immediatelydownstream of the regulator, as shown below.

Series-HAcoustic Silencer

Series-H ACOUSTIC SILENCERNoise Reduction Capability: 20-30 dBA

Series-H Typical Hook-up

ThermafloSeparator

Series 3010

SERIES-THACOUSTICSILENCER

PressureSensing Line

Series-TH Dimensions

Series-H DIMENSIONS – inches

Model A1 A B C Weight(lbs)

TH-8 4 8 14 57 145TH-10 6 10 16 71 210TH-12 6 12 18 81 295

Note: Other sizes available. Consult Thermaflo.

Noise Attenuation Equipment is used to reduce unwanted or excessive noise that commonly occurs in pressure reducing stations.

C

BA1 A

Inlet

GateValve

GateValve

Strainer

To Trap

FLOW