View
270
Download
3
Category
Preview:
Citation preview
TWI enrolment form PLEASE SEND APPLICATION WITH YOUR PAYMENT AND THE
NECESSARY ENCLOSURES TO:
TWI Technology (S.E.Asia) Sdn Bhd (Formerly known as TWI Training & Certification (S.E.Asia) Sdn Bhd)
No. 8, Jalan TSB 10 Sg. Buloh Industrial Park
47000 Sg. Buloh, Selangor, Malaysia
Tel.: +603-61573528 / 7 / 6 Fax: +603-61572378
E-mail: inquiry@twisea.com
PLEASE USE CAPITAL LETTERS THROUGHOUT
Personal Information:
TWI Candidate ID Number: (if taken other examinations with TWI)
Course ref ____________ Course date _______________________
Course title _______________________________________________
________________________________________________________
Name of the Candidate (as required on the certificate)
Date of birth (dd/mm/yy) ____________________________________
Permanent private address
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
Postcode __________________ Car Registration No ____________
Private tel. no _____________________________________________
E-mail ___________________________________________________
Correspondence address (if different from above)
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
Invoice Address (if different from below)
________________________________________________________
________________________________________________________
________________________________________________________
Sponsoring Company and Address
________________________________________________________
________________________________________________________
_________________________ Postcode _____________________
Contact name _____________________________________________
Telephone ________________________________________________
Fax _____________________________________________________
E-mail ___________________________________________________
Please tick if you are
A member of The Welding & Joining Society
An employee of an Industrial Member of TWI
Please tick:
Self - Sponsored Company Sponsored
WIM/WJS/TWI Industrial MEMBERS ONLY:
To claim your discount (course fee only) please enters your Membership
No:
WIM Membership No. : …………………..
TWI Industrial No.: ………………. WJS No.: …………..
In the event of cancellation by you, the event fee and the accommodation fee
(if applicable) will be returned less a cancellation charge of 20%. If less than
14 days notice is given by you, TWI reserves the right to retain the whole fee.
TWI reserves the right to cancel the event in case of insufficient registration
or illness of lecturers. TWI will ensure maximum possible notice is given to
the attendees and reserves the right to substitute lecturers and modify the
course details as required.
METHODS OF PAYMENT Full payment and/or Company Order no. must accompany this booking form.
Bookings received without payment/order number will be treated as provisional which does not guarantee a place.
Cheque Bank Draft BACS
made payable to : TWI Technology (S.E.Asia) Sdn Bhd
OR Credit Card (Please Indicate if Company Card) YES NO
Three digit security code ___________________________________________
Valid from & Expiry date ___________________________________________
Issue Number ___________________________________________________
Name (as it appears on card)
_______________________________________________________________
House number and postcode of card holder:
_______________________________________________________________
Signature of card holder ___________________________________________
OR Company order no _________________________________________
Approving Manager’s name _________________________________________
Title _______________________________________________
SPONSOR’S SIGNATURE:
Date: _________________________________________________
I would prefer an examination in week commencing
(we will do our best to meet your requirements, but reserve the right to offer alternatives)
Venue:
Kuala Lumpur Miri
Others (please specify)
Where did you hear about TWI Ltd?
TWI Training website TWI Training newsletter
Bulletin / Connect NDT Cabin
BINDT Publications Other
Do you have a disability or any special needs relevant to this course
or examination? Yes No
If yes, please provide details of any adjustments you may require.
TRA05/EX07 Doc 1 Rev 18 - Page 1 of 4
Internal Use Only
Booking Ref: ________________
Examination Applied For (to be completed in full by all applicants)
Examination Type: Initial, supplementary, renewal,
bridging or retest of a previously failed examination
Examination Body: CSWIP, PCN, AWS, ASNT, BGAS
PCN or BGAS Approval Number:
Current CSWIP qualifications held:
NDT Method (please circle) MT PT RT ET RI UT VT BRS
RPS LRUT Dig Rad PAUT AUT TOFD ACFM
Industry Sector: Aerospace, Welds, Wrought, Railway,
General
Categories:
Welding Inspection (please circle)
Level 1 Level 2 Level 3.2.1 Level 3.2.2 CSWIP/AWS
AWS/CSWIP Supervisor Instructor Endorsement
Underwater Inspection: (please circle)
Please contact TWI for the relevant EX07 document
3.1U 3.2U 3.3U 3.4U OGI ASCAN Concrete
Plastics:
Please contact TWI for the relevant EX07 document
To be completed by all applicants applying to attend CSWIP Welding Inspection Examinations -
I confirm that I have read and comply with the pre examination entry requirements as laid down in the CSWIP Requirement Documents –
DOCUMENT No. CSWIP-WI-6-92, 10th Edition January 2011 and understand that any fraudulent claim may result in the retraction of any
certifications issued.
Please tick the appropriate box and give a detailed statement of how you meet the requirements, this must be signed and verified by an
employer/third party -
Visual Welding Inspector (Level 1)
Although there is no specific experience requirement it is recommended that candidates possess a minimum of six months’ welding
related engineering experience and two years industrial experience.
Welding Inspector (Level 2)
Welding Inspector for a minimum of 3 years with experience related to the duties and responsibilities listed in Clause 1.2.2 under
qualified supervision, independently verified.
Certified Visual Welding Inspector (Level 1) for a minimum of 2 years with job responsibilities in the areas listed in 1.2.1 and 1.2.2.
Welding Instructor or Welding Foreman/Supervisor for a minimum of 5 years.
TRA05/EX07 Doc 1 Rev 18 - Page 2 of 4
Senior Welding Inspector (Level 3)
A current valid Certified Welding Inspector (Level 2) for a minimum of 2 years with job responsibilities in the areas listed in 1.2.1,
1.2.2 and 1.2.3. (Please attach copy)
5 years' authenticated experience related to the duties and responsibilities listed in Clause 1.2.3, independently verified.
Welding QC Co-ordinator
A current valid CSWIP 3.2 Senior Welding Inspector certification plus three years documented experience related to the duties and
responsibilities or an international equivalent.
A current valid CSWIP 3.1 Welding Inspector with 10 year’s documented experience related to the duties and responsibilities or an
international equivalent.
NDT Pre-certification experience
Please list your specific experience and duration as required by the scheme documentation and attach copies of log book entries if available for
NDT examinations, this is not a pre-requisite for examination, however certification will not be awarded until the experience is gained and
evidence provided. This experience must be verified by your employer or a recent major client:
Verifier
Name (in capitals): __________________________________________
Company: __________________________________________
Position: __________________________________________
Telephone no.: __________________________________________
Email Address: __________________________________________
Date: __________________________________________
To be completed by all applicants applying to attend CSWIP Plant Inspection Examinations –
I confirm that I have read and comply with the pre examination entry requirements as laid down in Section 3 of the CSWIP
Requirements Documents – DOCUMENT No. CSWIP-11-01 and understand that any fraudulent claim may result in the
retraction of any certification issued.
Please tick the appropriate box and give a detailed statement of how you meet requirements, this must be signed and
verified by an employer/third party –
Plant Inspection (Level 1)
I hold current approved NDT Level 2 (ACCP, CSWIP, or PCN) in two methods
(BGAS Painting Inspector and CSWIP 3.1 Welding Inspection qualifications are acceptable as methods)
I hold CSWIP 3.1 Welding Inspector or higher
I hold ONC in Mechanical Engineering or equivalent
TRA05/EX07 Doc 1 Rev 18 – Page 3 of 4
3
Authenticated Company Stamp
I have a minimum of Five years, assessed and authenticated industry experience in this field (Mature Entry Route), a
verified CV can be supplied – Must be authenticated by Line Manager
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
Plant Inspections (Level 2)
I I hold a valid Level 1 Plant Inspection approval
I have successfully completed the Level 1 exams as a pre entry requirement
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________
To the best of my belief, the candidate’s statement given above is correct at the time of signing.
Verifying signature (employer or equivalent):
CANDIDATE - PLEASE NOTE
I understand that TWI Ltd and its associated trading companies (and companies, organisations, or agents processing data on its behalf) will hold and use
personal data supplied by me for administration purposes. These purposes have been notified under the Data Protection Act 1998. The data may also be
used to send separate unsolicited mailings containing details of events, new services, products etc.
You have the right to ask TWI Ltd NOT to send such mailings. If you do not wish to receive this information from TWI Ltd, please tick this box .You
have the right of access to personal data that we hold about you, on payment of the access fee not exceeding £10. Requests should be addressed to The
Data Controller, TWI Ltd, Granta Park, Gt Abington, Cambridge CB21 6AL, UK.
I agree to read the Health & Safety and Security information provided by TWI and to abide by the guidance given.
I understand that occasionally images of training and examinations are taken by TWI for publicity and other purposes and that permission for my
inclusion in such material is implied unless I make it known to Customer Services at registration that I do not wish to feature.
I have read and understood the documentation issued by the scheme management that is relevant to the examination for which I am applying and
declare that I satisfy those criteria covering vision, training and experience. I accept responsibility for any examination fees in the event of non-payment
by the sponsor. I agree to abide by the requirements for certification as relevant to the examination for which I am applying. In particular I agree to
comply, if applicable, with the CSWIP rules on use and misuse of certificates and on professional conduct (see www.cswip.com).
I understand that any appeal against an exam result must be received within six months of the exam date.
I have read the listing and include all the requested information.
I understand that any false statement may result in the examination being invalidated.
Please tick: I confirm, understand and accept TWI’s terms and conditions as attached.
CANDIDATE’S SIGNATURE:
TRA05/EX07 Doc 1 Rev 18 – Page 4 of 4
3
ATTACHMENT 2
(TERMS AND CONDITIONS)
TWI Terms and Conditions of Training 1. Agreement Together with the relevant booking form (including any online booking) this document comprises the terms and conditions in relation to the training provided by TWI Technology (S.E.ASIA) Sdn. Bhd. These terms constitute the whole agreement between you and TWI Technology (S.E.ASIA) Sdn. Bhd. in relation to the training you register for, except where you and TWI Technology (S.E.ASIA) Sdn. Bhd. have otherwise specifically agreed in writing. All other terms and conditions, express or implied by statute or otherwise, are excluded to the fullest extent permitted by law, and supersede all prior agreements and understandings. 2. Application & Fees You must complete the appropriate booking form and submit this form together with full payment and/or Company Order. Payment maybe made by cheque, credit card (Mastercard, Visa, American Express), debit card, banker’s draft and bank transfer. Bookings received without payment/order number will be treated as provisional which does not guarantee a place. Provisional bookings shall expire within 10 working days of bookings being made or within 10 working days of the start of the training, whichever occurs sooner. In the case of late enrolments made within 10 working days of the start of the training, payment must be made immediately. The package fee (Course and Examination Package Only) does not apply for candidates taking the examination after six (6) months from the date of completion the course. However, if the candidates are taking the examination after six (6) months although signed up under package fee, then the difference in fees must be paid. If there is any cancellation on examination date by you (including Initial and Retest Examination), a fee of RM100 shall be charged accordingly. In the event of non-payment by your sponsor you accept responsibility for any training or examination fees. 3. Cancellation In the event of cancellation by you, the event fee and the accommodation fee (if applicable) will be returned less a cancellation charge of 20%. If less than 14 days notice is given by you TWI Technology (S.E.ASIA) Sdn. Bhd. reserves the right to retain the whole fee. TWI Technology (S.E.ASIA) Sdn. Bhd. reserves the right to alter the advertised schedule of training and examinations, which may include cancellation of an event. Where TWI Technology (S.E.ASIA) Sdn. Bhd. cancels an event, individuals with confirmed bookings will be offered alternative dates. If none can be provided then a full refund will be given. TWI Technology (S.E.ASIA) Sdn. Bhd. reserves the right to alter or amend the advertised content of any training or examination without notice in order to continuously provide a high quality service or due to circumstances beyond our control. TWI Technology (S.E.ASIA) Sdn. Bhd. will not be liable for any losses or expenses, including consequential, arising from any such alterations or amendments to the programme content and schedule including cancellation.
4. Awarding Bodies You have read and understood the documentation issued by the scheme management that is relevant to the examination for which you are applying and declare that you satisfy those criteria covering vision, training and experience and also understand that you may be required to supply documentary evidence of this to be eligible for certification. You agree to abide by the requirements for certification as relevant to the examination for which you are applying; any fraudulent claim may result in the retraction of any certificate issued. TWI Technology (S.E.ASIA) Sdn. Bhd. will endeavour to provide all reasonable assistance should you suffer from any disability or have any special needs. However, you must notify TWI Technology (S.E.ASIA) Sdn. Bhd. in advance of the training or examination date of any such disabilities and/or special needs on the booking form. Any appeals made by you to TWI Technology (S.E.ASIA) Sdn. Bhd. shall be received within 6 months of the training or exam date, any re-assessment shall incur an administration fee. Any appeals made by you to the awarding body with regard to the external examination or verification are outside the scope of these terms and are a matter for you and the awarding body. You may become liable for fees and other costs as a result of making any such appeals. 5. Acceptable use of Facilities In placing your booking you agree to abide by TWI Technology (S.E.ASIA) Sdn. Bhd. rules relating to TWI Technology (S.E.ASIA) Sdn. Bhd. facilities. This includes, but is not limited to the following
None of TWI Technology (S.E.ASIA) Sdn. Bhd. facilities may be used to locate, display or transmit any material which is illegal or offensive
No software may be downloaded or installed on any of TWI Technology (S.E.ASIA) Sdn. Bhd. computing equipment unless under the explicit direction of the TWI Ltd trainer
No data may be imported which has not been checked for viruses and which is not under the explicit direction of the TWI Technology (S.E.ASIA) Sdn. Bhd. trainer
I agree to read the Health & Safety and Security information provided by TWI and to abide by the guidance given. 6. Warranties and Liability TWI Technology (S.E.ASIA) Sdn. Bhd. warrants that the event will be provided using reasonable care and skill and, as far as reasonably possible, in accordance with the Registration Form and other published literature. Except in respect of death or personal injury caused by TWI Technology (S.E.ASIA) Sdn. Bhd.’s negligence, or as expressly provided in these terms, TWI Technology (S.E.ASIA) Sdn. Bhd. shall not be liable to you by reason of any representation (unless fraudulent), or any implied warranty, condition or other term, or any duty at common law, or under the express terms, for any loss of profit or any indirect, special or consequential loss, damage, costs, expenses or other claims (whether caused by the negligence of TWI Technology (S.E.ASIA) Sdn. Bhd., its servants or agents or otherwise) which arise out of or in connection with the provision of the event or its attendance by you, and the entire liability of TWI Technology (S.E.ASIA) Sdn. Bhd. under or in connection with the event shall not exceed the amount of the course fees, except as expressly provided in these terms. TWI Technology (S.E.ASIA) Sdn. Bhd. shall not be liable to you or be deemed to be in breach of the terms by reason of any delay in performing, or any failure to perform, any of TWI Technology (S.E.ASIA) Sdn. Bhd.’s obligations in relation to the event, if the delay or failure was due to any cause beyond TWI Technology (S.E.ASIA) Sdn. Bhd.’s reasonable control. You shall be deemed to have satisfied yourself that the event accords with your requirements. TWI Technology (S.E.ASIA) Sdn. Bhd. warrants that the event is structured for and contains the appropriate information to achieve the specific standards or qualifications as are specifically described in relation to the event but the TWI Technology (S.E.ASIA) Sdn. Bhd does not warrant that such standards or qualifications will be achieved by you.
7. Copyright and Intellectual Property Copyright on all training materials and methodology remains with TWI Ltd and TWI Technology (S.E.ASIA) Sdn. Bhd., except where copyright exists with a third party supplier. You agree that you will not copy or resell any training material or methodology that you may be given by TWI Technology (S.E.ASIA) Sdn. Bhd. during your training or examination. 8. Exclusion TWI Technology (S.E.ASIA) Sdn. Bhd. reserves the right to refuse access to its facilities and premises where there is reason to believe that a delegate is in breach of these conditions or where a delegate uses threatening, bullying, harassing or disruptive behaviour. TWI Technology (S.E.ASIA) Sdn. Bhd. will not be liable for any losses or expenses, including course fees and consequential damage, arising from any such exclusion. 9. Course and Exam Feedback TWI Ltd / TWI Technology (S.E.ASIA) Sdn. Bhd. is committed to providing high quality training and assessment for its customers and continuously seeks opportunities to improve its services. Constructive comments on where TWI Ltd / TWI Technology (S.E.ASIA) Sdn. Bhd. can improve its services are welcomed. TWI Ltd / TWI Technology (S.E.ASIA) Sdn. Bhd. asks customers at the end of a training course or examination to provide comments via a feedback form. The feedback form provides valuable information that enables TWI Ltd / TWI Technology (S.E.ASIA) Sdn. Bhd. to introduce improvements to all its training products and services. TWI Ltd / TWI Technology (S.E.ASIA) Sdn. Bhd. encourages its customers to provide honest feedback to enable the improvement processes to take place effectively. 10. Complaints Policy Occasion may arise where you feel it necessary to make a formal complaint about the training provided to you by TWI Ltd / TWI Technology (S.E.ASIA) Sdn. Bhd. TWI Ltd / TWI Technology (S.E.ASIA) Sdn. Bhd. has a complaints policy, this can be found on the training website; http://www.twitraining.com/home/customer-complaints-policy.pdf or you can ask for a copy of this form from a member of the administration team. 11. Data Protection You understand that TWI Ltd, TWI Technology (S.E.ASIA) Sdn. Bhd. and its associated trading companies (and companies, organisations, or agents processing data on its behalf) will hold and use personal data supplied by you for administration purposes. These purposes have been notified under the Data Protection Act 1998. The data may also be used to send separate unsolicited mailings containing details of events, new services, products, etc. You have the right to ask TWI Ltd and TWI Technology (S.E.ASIA) Sdn. Bhd. not to send such mailings. If you do not wish to receive this information from TWI Ltd or TWI Technology (S.E.ASIA) Sdn. Bhd., please update your Privacy settings via the link in My Account. You have the right of access to personal data that we hold about you, on payment of the access fee not exceeding £10.00. Requests should be addressed to The Data Controller, TWI Ltd, Granta Park, Great Abington, Cambridge, CB21 6AL. You understand that occasionally images of training and examinations are taken by TWI Ltd and TWI Technology (S.E.ASIA) Sdn. Bhd. for publicity and other purposes and that permission for your inclusion in such material is implied unless you make it known to Customer Services at registration that you do not wish to feature. 12. Applicable Law These terms shall be governed by and construed in accordance with the laws of England and each party irrevocably submits to the exclusive jurisdiction of the courts of England.
CANDIDATE’S SIGNATURE:
CSWIP 3.0 PERSONAL PARTICULARS Full Name(As per IC/Passport): Date of Birth : Gender : Nationality : Home Address : Mobile : E-MAIL : I/C OR Passport Number :
ACADEMIC QUALIFICATIONS
NO School/College/University Year Achievement
1
2
3
4
PROFESSIONAL OR TECHNICAL QUALIFICATIONS
NO Course University / Institute Year Grade
1
2
3
4
EMPLOYEMENT HISTORIES
Company : Position Title : Location : Duration/year :
Company : Position Title : Location : Duration/year :
Company : Position Title : Location : Duration/year :
Job Overview : Tick on appropriate Box
Yes or NO ( )
1- Codes and standards Application of the requirements of codes and standards.
2- Parent material identity Verification against documentation and markings of correctness of parent material.
3- Welding consumables identity Verification of correctness of welding consumables (electrodes, filler wires, consumable inserts, gases, fluxes etc).
4- Pre-weld inspection Verification that dimensions, fitup and weld preparations are in accordance with the engineering drawings.
5- Preheating Verification that preheat (where required) is in accordance with specified procedures.
6- Post weld visual inspection Visual inspection and dimensional check of completed weldment against specification requirements and drawings.
7- In-process welding surveillance Surveillance during welding to verify compliance with specified procedure including any preheat, interpass temperature control and post heat requirements.
VERIFIER
Authenticated Company Stamp
Name :
Position :
Company :
Telephone No :
Email Address
Signature & Date :
Yes NO Yes NO Yes NO Yes NO Yes NO Yes NO Yes NO
Company Stamp
CSWIP COURSE / EXAMINATION FEE - 2017
(ONLY FOR CHINA REGION)
Location
CSWIP 3.0 Visual Welding Inspector - Level 1 (2.5 days + exam) USD RMB USD HKD
Course & Examination package 760 5320 835 6513
Course Only 570 3990 630 4914
Initial Examination 285 1995 315 2457
Retest Examination 142 994 156 1217
10 year recertification - initial 170 1190 190 1482
10 year recertification - retest 95 665 105 819
Location
CSWIP 3.1 Welding Inspector - Level 2 (6 days + exam) USD RMB USD HKD
Course & Examination package 1900 13300 2090 16302
Course Only 1520 10640 1670 13026
Initial Examination 570 3990 630 4914
Retest Examination 305 2135 335 2613
10 year recertification - initial 306 2142 370 2886
10 year recertification - retest 190 1330 210 1638
Location
CSWIP 3.2 Welding Inspector - Level 3 (6days + exam) USD RMB USD HKD
Course & 3.2.1 Examination package (without RI paper) 1900 13300 2090 16302
Course & 3.2.2 Examination package (with RI paper) 1990 13930 2190 17082
Course Only 1520 10640 1670 13026
Initial Examination - 3.2.1 without RI paper 570 3990 630 4914
Initial Examination - 3.2.2 with RI paper 665 4655 730 5694
Retest - written and/or practical 325 2275 355 2769
Retest - interpretation only 215 1505 210 1638
10 year recertification - initial 295 2065 390 3042
10 year recertification - retest 155 1085 235 1833
Supplementary - initial 295 2065 320 2496
Supplementary - retest 155 1085 170 1326
Location
AWS - CSWIP Bridging - Level 2 (2.5 days +exam) USD RMB USD HKD
Course & Examination package 760 5320 835 6513
Course only 540 3780 595 4641
Initial Examination 595 4165 725 5655
Retest 330 2310 364 2840
WELDING INSPECTION
HONG KONG
HONG KONG
HONG KONG
HONG KONG
MAINLAND
MAINLAND
MAINLAND
MAINLAND
Location
Magnetic or Penetrant Testing Level 2 (6days + exam) USD RMB USD HKD
Course & Examination package 1060 7420 1220 9516
Course 870 6090 1000 7800
Initial Examination 435 3045 435 3393
Retest examination 240 1680 240 1872
5/10 yr recertification examination 230 1610 230 1794
5/10 yr recertification examination - retest 230 1610 230 1794
Location
Ultrasonics Testing Level 2 Direct Access (15days) USD RMB USD HKD
Course & Examination package (1or 2 categories) 2575 18025 2845 22191
Course & Examination package (3 or 4 categories) 2920 20440 2920 22776
Course 2140 14980 2400 18720
Ultrasonics Testing Level 2 (10 days) - Hold C/P Level 1
Course & Examination package (1or 2 categories) 1960 13720 1960 15288
Course & Examination package (3 or 4 categories) 2035 14245 2035 15873
Course 1510 10570 1510 11778
Initial weld (one category) 665 4655 665 5187
Initial weld (two categories) 665 4655 665 5187
Initial weld (three categories) 750 5250 750 5850
Initial weld (four categories) 750 5250 750 5850
Retest examination per category 210 1470 210 1638
5/10 year recertification (one/two weld category) 445 3115 445 3471
5/10 year recertification (three/four weld category) 550 3850 550 4290
Supplementary (one weld category) 460 3220 460 3588
Supplementary (two weld category) 580 4060 580 4524
Supplementary (three weld category) 620 4340 620 4836
Location
Phased Array Ultrasonic Testing USD RMB USD HKD
PAUT Level 2 (15days + exam)
Course & Examination package 3800 26600 5115 39897
Course only 3320 23240 4490 35022
Initial examination 760 5320 760 5928
Retest examination 410 2870 410 3198
PAUT Level 3 (5days + Hold CSWIP/PCN PAUT L2)
Course & Examination package 1880 13160 1880 14664
PAUT Level 3 Direct Access (10days)
Course & Examination package 2565 17955 2565 20007
Retest examination 410 2870 410 3198
Non Destructive Tesitng
HONG KONG
HONG KONG
HONG KONG
MAINLAND
MAINLAND
MAINLAND
Location
AUT + AUTDI (L1+L2) package (21days + exam) USD RMB USD HKD
Course & Examination package 4400 30800
Course only 2150 15050
Initial examination 690 4830
Retest examination - AUT L1 410 2870
Retest examination - AUTDI L2 410 2870
AUT Data Interpreter Level 2 (5days + exam)
Course & Examination package 2630 18410 2630 20514
Course only 2145 15015 2145 16731
Initial examination 690 4830 690 5382
Retest examination 410 2870 410 3198
Location
Time Of Flight Diffraction USD RMB USD HKD
TOFD Level 2 (10days + exam)
Course & Examination package 3030 21210 4785 37323
Course only 2700 18900 4235 33033
Initial examination 760 5320 760 5928
Retest examination 410 2870 410 3198
TOFD Level 3 (5days + Hold CSWIP/PCN PAUT L2)
Course & Examination package 1880 13160 1880 14664
TOFD Level 3 Direct Access (10days)
Course & Examination package 2565 17955 2565 20007
Retest examination 410 2870 410 3198
Location
Radiographic Interpretation Level 2 USD RMB USD HKD
Course & Examination package 2020 14140 2020 15756
Course 1750 12250 1750 13650
Initial Examination 440 3080 440 3432
Retest examination 210 1470 210 1638
5/10 yr recertification examination 300 2100 300 2340
5/10 yr recertification examination - retest 300 2100 300 2340
Supplementary 300 2100 300 2340
Location
Radiographic Safety USD RMB USD HKD
Level 1
Basic Safety 450 3150 450 3510
Level 2
Radiation protection to supervisor level 500 3500 500 3900
(available to basic safety holders only)
HONG KONG
HONG KONG
HONG KONG
HONG KONG
MAINLAND
MAINLAND
MAINLAND
MAINLAND
Location
Radiation Testing / NDT 20 USD RMB USD HKD
NOTE : TRAINING PROVIDED AT VENUE HAVE THE FULL
FACILITIES/EQUIPMENT.
Course (15days) 1760 12320 1760 13728
Initial Examination 500 3500 500 3900
Retest examination 350 2450 350 2730
5/10 yr recertification examination 400 2800 400 3120
Location
Radiation Testing + Safety Level 2 USD RMB USD HKD
NOTE : TRAINING PROVIDED AT VENUE HAVE THE FULL
FACILITIES/EQUIPMENT.
Course (17 days) 1820 12740 1820 14196
Initial Examination 550 3850 550 4290
Retest examination 385 2695 385 3003
5/10 yr recertification examination 450 3150 450 3510
Remarks:
1. Other training courses and examinations will ONLY be provide upon request.
2. About quotation is course & exam fee ONLY, excluding administrative fee & other expenses.
HONG KONG
HONG KONGMAINLAND
MAINLAND
Recommended