TRUSTED COMPATIBILITY | WARRANTED PROTECTION...600146 DR-7483 NVELOP Sell Sheet_REV1-18.indd Author:...

Carlisle Construction Materials’ (CCM) roofi ng, waterproofi ng, and insulation companies have joined forces

to create NVELOP Building Envelope Solutions: a comprehensive building envelope system backed by the

industry’s only tie-in warranty. NVELOP is unique in its ability to ensure product compatibility at critical tie-

in junctions, creating a completely warranted, six-sided building envelope system. NVELOP’s single-source

warranty options provide confi dence and reduce liability for architects, contractors, and building owners.

The NVELOP Advantage ■ Worldwide presence with products available in more than 80

countries

■ Proven track record with more than 50 years of manufacturing experience

■ Industry’s most comprehensive weather barrier (membranes and insulation), offering:

» Under slab » Foundation » Above-grade walls » Roof

TRUSTED COMPATIBILITY | WARRANTED PROTECTION

■ Proven product compatibility at tie-in junctions

■ Industry’s most comprehensive single-source warranty

» Tie-in compatibility guarantee » One point of contact in the event of a leak

■ Comprehensive details

■ Reduces liability for architects, contractors, and building owners

■ Six-sided air seal promotes energy savings

■ Comprehensive specifi cations including CSI MasterFormat verbiage

■ No to Low cost for warranty coverage

www.carlislenvelop.com

P.O. Box 7000 Carlisle, PA 17013 toll free / +1-800-453-2554 fax / +1-717-245-7053 www.carlislenvelop.com

Carlisle and NVELOP are trademarks of Carlisle.REPRINT CODE: 600146 - “NVELOP Sell Sheet” © 2018 Carlisle. 01.22.18

NVELOP Warranty Options*

1. NVELOPMaterial Warranty

■ 5-year warranty

■ Covers manufacturing defects

■ Covers product compatibility

■ No fee

2. NVELOPlusMaterial Warranty

■ 10-15 year warranty*

■ Covers manufacturing defects

■ Covers product compatibility

■ $500 fee

*NVELOPlus material warranties provide tie-in warranty coverage of 10-15 years. Maximum warranty duration is dependent on the shorter of the two material warranties being tied together. Example: A 10-year warranted wall tying together to a 20-year warranted roof, would allow for a 10-year NVELOPlus material warranty.

NVELOP Warranty Prerequisites ■ Multiple CCM systems must be used

» Carlisle SynTec Systems » Carlisle Coatings & Waterproofi ng » Hunter Panels XCI » InsulFoam » Versico Roofi ng Systems » Carlisle WIP

■ At least two CCM systems must be joined with an approved tie-in

■ All conditions must be met for individual CCM system warranties

■ Individual CCM system must be paid for and received

Warranty Application ■ Simple one-page online application

■ Warranty application submittals are sent directly to CCM Warranty Department for effi ciency

■ NVELOPlus fee is paid over the phone using a credit card