View
0
Download
0
Category
Preview:
Citation preview
®
These translucent stains improve the aesthetics of decorative concrete. Adding them to any ChemMasters solvent-based acrylic cure & seal or sealer provides rich beauty to exposed aggregate or other decorative concrete or masonry surface.
• Deepens the color and enhances the gloss of the concrete matrix
• Highlights the natural color of stone
• Enables a wide range of decorative effects to be achieved
• Hides variations in the substrate color
The standard application rate for Translucent Tint is 1 quart (single) or 2 quarts (double) per 5-gallon pail of clear acrylic sealer. The dosage rate used depends on the decorative effect desired. Using a double dose of Translucent Tint per pail will darken and deepen the color more than a single dose.
Translucent Tint for Beautiful Concrete
Easy to Use - Pour 1 or 2 quarts of Translucent Tint into a 5-gallon pail of a clear, solvent-based, ChemMasters sealer or cure & seal and stir.
Once determined, the same amount of Translucent Tint per pail should be used for the entire project It is recommended that a 1-quart application be tested before adding a second quart.
Translucent Tint mixes in quickly and easily. Apply the stain with a brush, roller or sprayer according to the directions on the 5-gallon pail.
Single dose sampler shown. Actual appearance may vary and is dependent on the color and porosity of the substrate. Special colors available upon request.Consult the current ChemMasters Distributor Net Price List for availability of pre-tinted sealers.
Raw
hide
Hon
ey B
row
nTe
rra
Cotta
Bro
wn
Gra
yG
inge
rbre
ad B
row
nM
errim
ac B
row
nB
uff
Translucent Tint for Beautiful Concrete
before
after
Polyseal™ Tint and Polyseal™ WB Tint
®ChemMasters, Inc.300 Edwards Street, Madison, OH 44057Phone: 440-428-2105 Toll-Free: 800-486-7866Fax: 440-428-7091www.chemmasters.net info@chemmasters.net © 2019 ChemMasters, Inc.
Our Knowledge is ConcreteSM
We manufacture a complete line of specialty products to improve, repair, protect and beautify concrete and masonry. Contractors rely on our experience, knowledge & quality to help ensure success.
Polyseal is a trademark of ChemMasters, Inc. ChemMasters is a registered trademark of ChemMasters, Inc.Actual appearance may vary and is dependent on the color and porosity of the substrate. Special colors available upon request.Consult the current ChemMasters Distributor Net Price List for availability of pre-tinted sealers.
Opaque Pigments to Beautify and Unify Appearance of ConcreteThese concentrated pigments are your “go-to” problem- solvers for hiding repairs, stains, blemishes or pour variations in concrete. Add them to clear ChemMasters acrylic cures and seals to produce a sealed, hardened and dustproof surface for broom-finished or smooth-finished concrete.
• Polyseal Tint pigment is for solvent- based acrylic sealers
• Polyseal WB Tint pigment is for water-based acrylic sealers
Polyseal Tint & Polyseal WB Tint are packaged in 1/2 gallon units. Each unit of tint is sufficient to pigment 5 gallons of a clear Polyseal formulation. All Polyseal Tint formulations are made from inorganic pigments, which resist outdoor wear and UV exposure. Typically two coats, each applied at 300 square feet per gallon by brush, roller or sprayer will provide long-lasting color and protection to exterior concrete.
Add to Polyseal sealers for a beautiful
opaque surface.
Win
ter W
hite
Buf
fSa
ndst
one
Bat
tlesh
ip G
ray
Tan
Bric
k Re
dLi
ght G
ray
Dar
k Ch
ocol
ate
Terr
a Co
ttaM
ilk C
hoco
late
Fren
ch G
ray
Bla
ck
untinted
tinted
Recommended