View
219
Download
0
Category
Preview:
Citation preview
Toolfair & Elex 2017 – Build-up/Breakdown Following are guidelines for build-up and breakdown: 1)
Build-up Times Wednesday 1st November Space only Exhibitors 9.00am – 7.00pm Shell scheme Exhibitors 10.00am – 7.00pm Gangways must be cleared by 7.00pm Thursday 2nd November All Exhibitors 8.00am – 9.30am Gangways must be cleared by 9.30am PLEASE NOTE EXHIBITORS ARRIVING BEFORE THESE TIMES CANNOT BE GUARANTEED ACCESS TO THEIR STAND. Breakdown Friday 3rd November 4.00pm – 7.00pm BREAKDOWN MUST BE COMPLETED AND HALL CLEARED BY 7.00PM
Please ensure that any contractors working on your stand are also aware of all regulations and restrictions. 2) FOR IMMEDIATE ATTENTION
Due to the width of the show’s gangways, any exhibitor displaying a large item on their exhibition stand ie an item that should be in your allocated stand area before the exhibition shell scheme is erected (eg a vehicle) must notify me immediately. I will need to allocate a specific time for your build-up. If I am not notified of your special requirements before Wednesday 25th October, I cannot guarantee we will be able to accommodate you on the day.
3) I have enclosed various maps showing venue location and unloading facilities for the exhibition halls. The exit doors shown on the plan will give direct access into the halls.
4) Car Parking at Sandown is free of charge for exhibitors and contractors.
Exhibitors are able to park on the Grandstand Apron area for the exhibition. Please ensure a completed vehicle pass is displayed in your vehicle at all times.
The exhibition vehicle gate will be accessible for exhibitors use for open and build up days. On event open days the gate will be closed approximately 10 minutes prior to the event opening time (10am) and will be opened approximately 10 minutes after the event closing time depending on the amount of visitors still in the halls. Exhibitors/contractors will not be given access to this area during the
event open times for health and safety reasons and are also not encouraged to leave this area. Should exhibitors/contractors wish to leave during event hours they should park within the main car park area. Vehicle movement during open hours of events is strictly prohibited.
5) Stand personnel must wear Exhibitor/Contractor badges at all times. These can
be pre-ordered from the show website (www.elexshow.info or www.toolfair.info). 6) There will be members of staff from Hamerville on site during build up, who can
assist your staff during the day and there will also be staff from our contractors on hand to help with your shell scheme or electrical requirements. A service desk will be set up in the exhibition hall.
Please provide the staff who will be building up your stand with the necessary copies of forms that needed to be completed for the shows contractors, for reference on the day, as these should have been returned directly to the contractors. Hamerville do not have copies of these forms so resolving any problems on the day would be made much easier if these were available.
The Organiser’s Office is situated in the Surrey Hall behind stand D1. The contact number in the office, from Wednesday 1st November, is 01372 461300.
7) Show open times are: Thursday 2nd November 10.00am – 4.00pm Friday 3rd November 10.00am – 4.00pm However by 9.30am on each morning, we would expect all the ‘finishing touches’ to your stand to be completed and all stand personnel ready to receive visitors. 8) There has been a change in the law within the Events Industry in regards to CDM
(Construction Design and Management). Sandown Park is enforcing this new legislation. It is very important that you read the CDM Site Induction. Please make sure that you brief all staff working on your stand. If you have any contractors on your stand, they will also need to be given a copy of the CDM Site Information.
ESHER
THAMESDITTON
HINCHLEYWOOD
HAMPTONHAMPTONCOURTCOURT
HAMPTONCOURT
RIVER THAMES
HA
MP
TON
C
OU
RT
WAY
A2
44
ESHER BY-PASS
A3
K
ING
STO
N
BY-PASS
STA
TIO
N R
OA
D
EMB
ER L
AN
E
E
SH
ER
RD
.
B
33
79
HO
OK
RO
AD
A
24
3
A309 KINGSTON BYPA
SS
R
OAD A309
A308 to M3Junction1& M25
To M25, J10
To M25, J9(Eastbound only)
To CentralLondon
CLAYGATE
TOLWORTH
THAMESDITTON
HamptonCourtPark
Sandown ParkSandown ParkRacecourseRacecourse
Sandown ParkRacecourse
ESHERHINCHLEY
WOOD
WESTONGREEN
A3050
A307
A307
HAMPTON CT. RD.
EMBER COURT RD.
Starthere
A3 Northbound
Starthere
Hampton CourtRoundabout
ESHER P
K
SANDOWN R
D
A2
44
CH
UR
CH
MO
RE
LA
NE
ST
HIGH ST A307
PORTSMOUTH
RD
LANE GRN
LAMM AS ES H E R
RACECOURSE
ES
HE
RLA
NE
N
Heathrow
✈
✈
CENTRALLONDON
Section detailedbelow
10
The M23-Crawley &
Gatwick Airport
M25
M25
M25
A24
A24
A24
M3
M4M4
A3
A3
A40
A406
A217
StainesStainesStaines
A316
The A3-Guildford &
(Portsmouth)
The A24-Horsham &Worthing
UxbridgeUxbridgeUxbridge
A205
A4
SuttonSuttonSutton
A23
A23
Kingston-Kingston-upon-Thamesupon-Thames
Kingston-upon-Thames
9
1 A308/9
A243
54B
2
8 8
7
HeathrowHeathrowHeathrow
CENTRALCENTRALLONDONLONDONCENTRALLONDON
Section detailedSection detailedbelowbelowSection detailedbelow
SurbitonSurbitonSurbiton
4 12
7
M23
The M3-Basingstoke
& SouthamptonA3
EsherLeatherheadA244
LondonKingston
(A3)
0 0 0 00,0 km
0 0 0 20,3 km
0 0 0 00,0 km
0 0 0 00,0 km
0 0 2 03,2 km
0 0 1 93,1 km
SandownPark
Staines A309Esher
PortsmouthGuildford A3
A309StainesEsher
L’Head A243
Dorking (A24)
(M25)Walton A244
LondonA307
GuildfordA307
Sandown Park &Exhibition
St GeorgesChurch
ClaremontLandscapeGardens
(A3)
(A3)
LondonSutton
SCILLY ISLES
KingstonA307
A309 (A3)
SandownPark
Esher A307Guildford (A3)
11'9"
15'9"
Guildford(A3)Esher A307Sandown
Park
(M3)Staines (A308)Hampton Court A309
SCILLY ISLES
Exceptrace days
Sandown ParkRacecourse &
Exhibition Centre
0 0 2 23,5 km
Sandown ParkRacecourse
Exhibition Cemtre
Sandown ParkLeisure Complex
N
Sandown Park, Portsmouth Road,Esher, Surrey, KT10 9AJ
Tel: 01372 464348 Fax: 01372 461334email: sandown.events@jockeyclubracecourse.com
www.sandown.co.uk
By Rail, Esher Station. Connections from London Waterloo on the Woking Line. 10 minutes walk to entrance.
Heathrow Airport. Approximately 13 miles from racecourse - 30 minutes drive.
Gatwick Airport.Approximately 27 miles from racecourse - 45 minutes drive.
✈
Public Transport
Locator Map
Section Detail
OS data. PU 100040256. Crown 2003.
Give Way 2007 TM Tel: 0800 019 0027.
Issue Number : 162Issue Date : 06 Jun 2017Updated By : cshannonScale : N.T.S.
Toolfair & Elex Sandown Park - Surrey Hall 2nd & 3rd November 2017
5
3
34
3
74
33
4
3
10
3
5
5
3
6
5
6
4
3
6
6
3
3
2
4
3
6
3
64
5
54
3
3
8
8
8
4
2
4
6
6
6
14
3
3
8 7
3
9
3
76
2
3
10
6
3
6
3
2
3
5
6
6
3
6
9
2
7
4
6
5
3
5
3
3
6
6
3
3
3
4
3
4
3
3
2
66 11 4
3
3
6
6
3
3
6
3
3
3
6
3
2
33
3 4
5
3
4
6
3
6 4
3
4
3
6
3
3
3
3
3
6
5.5
25.85
5
2.5 5.59
4
3
3
3
6
3
4
3
3
3
6
3
4
4
3
3
4
4
3
3
5
3
6
3
5
6
3
6
6 6
3
55
3
2
3
3
2
4
3
4 4
6
2
3
3 4
53
2
41
3
3
6
2
12.5
18
3
4
3
13
3
3
5
3
1591221121230
15
15
3024
18
18
6
12
1818
12
2512
24 64
8
24
36
42
24 21
27 21 12
30
18 18
6
30
18
18
1821
24 15
15
18
18
9
9
12
12
6 12 18 33 12
18
18
9
18
9
18
6
9 12
15
24 18 12
12 18
9
9
18
5.56.25
129
18
18
12918
121212
12
15
18
15
18
36
1515
6
6
12
12
12
12
106
123
18
6
225
9
12
9
15
6
t
t
t
t
t
Exit Exit Exit
Exit
ExitExit
Exit Exit Exit Exit
Entrance
Surrey Hall
2
2.52
2
2 2
2.25
333
3
2
2.5
2
2
2.03
2.5
2.5
4.85
2.18
22
2.05
3
2
2.5
2.23
1.09
2 1.042.3
2.5
2
2.19
2.53
3
2 3
2
2.122
2
2.5
1.5
2.132.25
ASBACEuropaComponents
ECIPanasonicA-PlanRidgidLakedale
Knipex
FischerFixing
HitachiTrustford
Metabo
Faithfull Tools
Packexe
Imex
Innotec
LeicaDart
ToolbankEasyview Brian
Hyde Irwin
Action Can
FeinFestool
Makita
Milwaukee Armeg
Wera Tools of the TradeTrade Survey
Bahco
Thanet(Marshalltown)
OX
Y3K
LS Starrett
Gap
Timegaurd
TrumpfWiha
Hamilton
Kewtech
Hager
Wago
NAPIT
OptonicaLED
R FSolutions
LED UK
Fluke
Delta Dore NationalVentilation
Amitex Ansell Daxlite
Klein
Super Rod
SavingLightbulbs
Wiska
Electrorad
Envirovent
SchnablClik Farho
Danlers
ClickJCC Brother
Alpha Eurolite
ChannelSafety
TaisonLighting
Stroma
Hi-Line Lighting Varilight
AirflowSPD
MK
Labcraft
SaxbyLighting
BEWMegger
Logic 4TrainingAicoRako
Chint
Gewiss
SearchlightElectric
Hylec
ITW
BOSCH
BEGTrend
Uni-LiteTainer
Uni-Wipe
BigWipes
SchneiderElectric
LED Hut
MarshallTufflexTIS
Grasslin365
TremcoIllbruck
QGroup
NICEIC
/ELECSA
FMB
Boddingtons
Cladman
Vespula
Hultafors
Pilot Pen
A11A8A9A6A4A3A1
B13
B15
B7B1
B5
B3
F21
F15
F14F17
F18
F5F1
F8 F10 F12
F11
C1C3
C7 C8
D1 D2D6
C15
C13 C18
C17
C20 C22
C24
D13D9
C26
C32
C30
C38
C34
C40
C36
C42
C37
D14 D15D16 D19 D21
C48
C45
C50
C46
C51
C52
B53B42 B43
B40 B44
B48 B50
B46 B52
C54
B55
A20
A21A19
A18A17
H5
H3
A15A14A13B38B36B32
B34
B28
B30
B24
B26
B20
B22B18
B14B12
A10
F20
D7
H1
H12H10
F22C5
B10B45
C60
B8
B9
B6 B56
F6
F16
Contents Introduction Emergency Evacuation Procedures Traffic Management Procedure Welfare facilities on site-
Ø Toilets Ø Catering Facilities Ø First Aid
Smoking PPE Build up & Breakdown procedures
Site Induction It is essential that anyone working in and around any CDM site with Sandown Park participates in this induction. This includes all organisers, exhibitors, contractors and Sandown Park staff.
It is important whilst working at Sandown Park that you are aware of the safety rules and procedures that are in place.
All of your contractors and employees are required to read this document prior to working at Sandown Park.
Emergency Evacuation Procedures Please ensure that you are familiar with your nearest Emergency Exits
If you discover a FIRE raise the alarm immediately via the nearest ‘Break Glass’ or by informing a member of staff or Duty Manager
Fire extinguishers & break glasses are located next to each Fire Exit within the Halls
Emergency Evacuation Procedures On hearing the alarm leave the building via the nearest fire exit. Sandown Park staff will evacuate the building. There will be an announcement made following the alarm stating:- “Ladies and Gentlemen we have an important announcement to make. You are requested to leave the building by the nearest available EXIT” This message will be repeated TWICE. Once evacuated out of the building please make your way to either Assembly Point B or Assembly Point C as directed by a member of Sandown Park staff. An announcement will be made when visitors can be re-admitted to the building.
Welfare Facilities Toilet locations – Ø Lower Main Foyer
Ø Upper Main Foyer
Ø Surrey Hall, Centre (no disabled facility)
Ø Surrey Hall, door 7
Ø Esher Hall
Food & Beverages Ø Food Hall
Ø Costa Coffee in Food Hall
Ø Esher Hall Bar
Ø All taps at Sandown provide suitable drinking water
Welfare Facilities First Aid In the event of requiring First Aid, please contact Ø Sandown Park Staff
Ø Sandown Security 07741 249721
Ø Visit Organisers Office (Door 4 or Esher Hall)
The First Aid Room is located in the centre of Surrey Hall between Door 6 and 12
First Aid boxes locations Ø Organisers Office (Door 4 and Esher Hall)
Ø Security Desk, Main Foyer
All incidents and near misses must be reported to your Event Manager
Site Traffic Rules Loading / unloading during Events Report to the security on arrival and follow instructions and directions given Vehicles entering Sandown Park must conform to speed limits (5MPH) and road signs Do not park on double yellow lines or hatched areas Do not park of pavements or pedestrian walkways as this may obstruct pedestrians Slow down when approaching junctions, narrow roadways and in areas of congestion
Avoid obstructing points of access or exit When a pass system is in operation always display your pass in the windscreen
A queuing system for loading / unloading on occasions will be in operation
Site Traffic Rules Loading / unloading during Events Adhere to times allocated for loading / unloading given to you by the organisers. Sandown Park will not allow access without the permission of the Event Organisers.
Once you have unloaded your vehicle you will be directed to a car park
All pedestrians please be aware of vehicles loading and unloading and moving / reversing vehicles including forklifts. Always use designated pedestrian walkways
Vehicles parked in unauthorised areas may be removed by Sandown Park.
Access to the unloading/loading doors is prohibited during Event opening times.
Breakdown Procedure Familiarise yourself with the breakdown procedures and timings as issued from the event organiser. This is key to ensuring the understanding of arrangement and co-operation in maintaining a safe environment.
It is essential that breakdown does not commence until all visitors have left the hall.
Breakdown Procedure Please also be aware of site rules, ensuring that this information is passed on to all contractors and exhibitors working at the TIC. Ø No persons under the age of 16 are permitted in the exhibition Halls during
these periods
Ø No vehicles will be allowed to load / unload or enter / exit the venue until authorised by a member of the venue security team
Ø No large items i.e. pop-up stands or trolleys may be taken through any of the main public entrances. All equipment must exit the building via the fire exit doors at the rear and side of the Halls
Ø Stands must not be broken down until all public are clear from the hall
Ø No vehicles allowed with the halls to unload/load at any time
Smoking Sandown Park is a No Smoking Venue. This includes e-cigarettes
Smoking is permitted outside the halls overlooking the Racecourse or the Parade Ring
Site Rules During all event build ups and breakdowns ALL staff, organisers and contractors are required to wear hi vis clothing. It is advisable to wear safety shoes within the CDM site depending on the task you are completing Fire routes must be kept clear from obstruction at all times
No hot works can take place without a hot works permit being issued
Any person suspected to be under the influence of drugs or alcohol will be ejected
Only persons who have received suitable training are permitted to operate plant or machinery (including fork lift trucks) and Sandown Park must see all relevant licenses
Thank you for your co-operation. If you have any queries regarding the above, please contact an Event
Manager
TOOLFAIR & ELEXVEHICLE PASSEXHIBITOR:
STAND NUMBER:DRIVER'S CONTACT NUMBER:
Valid for duration of exhibition
from Wednesday 1st November to Friday 3rd November
Exhibitors are able to park on the Grandstand Apron area for the exhibition. The exhibition vehicle gate will be accessible for exhibitors use foropen and build up days. On event open days the gate will be closed approximately 10 minutes prior to the event opening time (10am) and will beopened approximately 10 minutes after the event closing time depending on the amount of visitors still in the halls. Exhibitors/Contractors willnot be given access to this area during the event open times for health and safety reasons and are also not encouraged to leave this area. Should Exhibitors/Contractors wish to leave during event hours they should park within the main car park area.VEHICLE MOVEMENT DURING OPEN HOURS OF THE EVENT IS STRICTLY PROHIBITED
* PLEASE COMPLETE AND DISPLAY IN VEHICLE VEHICLE WINDSCREEN
This is not a parking permit
Recommended