timesavers overzicht borstels 42 RB SERIES...ORIGINALS by Timesavers Brush type Suitable for...

ORIGINALSby Timesavers

Brush type ApplicationSuitable for

Aluminium Oxide

Silicon Carbide

Cross Flex

Cutting skin oxide

removal brush

Korfi l brush

Steel

Aluminium

Stainless steel

Especially for

aluminium

All metals

Steel with

blue oxide on

vertical faces

Aluminium

Slashed construction: 5 mm wide, all sorts

of materials, large radius until at least

2 mm (steel & aluminium (set of 8 brushes))

Part. no. 599316 599325 599317

Grit: 60 80 100

Slashed construction: 5 & 3 mm wide, more

suitable for edge rounding of small holes, finer

surface roughness (= lower RA worth) and less

stiff / less aggressive (set of 8 brushes)

Part. no. 599308 599306 599305 599326

Grit: 100 120 180 400

Longer brush life due to better chip removal

lesser smearing of the brush (set of 8 brushes).

Part. no. 599303

Grit: 180

For a “ No Way “ (directionless) finish and

removal of milling marks aluminium surfaces.

Standard grit size is 120 (set of 8 brushes).

Part. no. 599297

Grit: 120

Standard (not adjustable) brush for optimal oxide

skin removal on cut face.

Part. no. 459667 (set of 4 brushes) - 1 mm

Part. no. 460368 (set of 8 brushes) - 1 mm

Adjustable brush for use in combination

with deburring brushes.

Part. no. 460076 (set of 4 brushes) - 1,25 mm

For e.g. deep pockets and upstands

Part. no. 599329 (set of 8 brushes) - 1,25 mm

Grit: 120

1)

2)

3)

4)

5)

TIMESAVERS ORIGINALSOVERVIEW BRUSHES 42 RB SERIES

Order? Questions? Check: www.timesaversint.com Mail: info@timesaversint.com Tel: +31 - (0)113 238911

Slashed construction

Slashed construction

5 mm

5 mm

5 mm

3 mm

3 mm

5 mm

5 mm

5 mm