View
7
Download
0
Category
Preview:
Citation preview
2006.4.17
Assembly instructions: Fourteen A4-sized sheets.
Paper craft: Eighteen A4-sized sheets with 114 parts in all
These instructions apply only to the "YZR-M1." These Paper Craft parts areeasier to work with when printed out on strong, thick paper (like postcard stock).
In creating these Paper Craft models we use110kg Kent paper stock
Thank you for downloading the "YZR-M1"paper craft model. By simplyfollowing this manual while referring to the names and numbers shownon the parts sheets, you can assemble an authentic-looking replica of the YZR-M1.
2
Tools and materials needed
Basic working method and markings
Items of Caution
One - point Advice
*Before beginning assembly, test adhesive amounts
on extra paper.
*Cut carefully with cutting blade, Exacto-knife or
scissors.
*Occasionally, white spots will be apparent on folds
and cuts. Use a marker or pencil to fill in these spots.
It is recommended that this be done after each stage
of assembly because coloring becomes more difficult
once parts are assembled.
*As an adhesive, white wood glue is recommended.
Avoid over application as this may cause the paper to
wrinkle.
*For folding parts, first use an awl or other pointed
tool to make a light crease along the dotted or solid
line. This will make the folds straight. Avoid making
strong creases, as this will cause the paper to tear.
-Ruler - scissors - blade cutter or "Exacto-knife" - awl or
other pointed tool (for making a folding crease) - felt pen
- pin set - glue - hand towel ( for cleaning your fingers) -
dictionary or other heavy book ( to press the papers flat).
*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size. There
may be differences in dimensions, depending on the
type of printer used.
*Follow the working method and markings carefully.
*Cut carefully along the outter line with cutting blade,
Exacto-knife or scissors.
Fold along these lines. The printed surface should beon the outside of the folded shape.
Solid lines
Fold along these lines. The printed surface should beon the inside of the folded shape.
Broken lines
Cut along these lines.Dotted line
Do not fold or cut the partsmarked .
Cut out parts marked with anasterisk(*).
Red dots are the referencepositions for gluing surfaces.
2
1To begin
How to assemble
First, assemble each component by following theworking method and markings. Then, refer to theillustration and photos below to glue the parts together.
1 Assembling the Front Cowl
Front Cowl Sheet A, 5 parts in total
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Indication of Working Methods Fold or Curve Glue
A-A-2
A-A-3
A-A-2
A-A-1
A-A-5
A-A-4
3
Reference photo
First, assemble each component by following theworking method and markings. Then, refer to theillustration and photos below to glue the parts together.
SteeringSheet B, 18 parts in total
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Indication of Working Methods Fold or Curve Glue
2 Assembling the Steering
[ Upper Steering Column ]
[ Lower Steering Column ] *DO NOT glue the upper and the lower parts
of the steering column at this stage.
B-B-1818B-B-1717
B-B-1414
B-B-5
B-B-1313
B-B-1212
B-B-1
B-B-2 B-B-4
B-B-6
B-B-1010
B-B-8
B-B-7
B-B-3B-B-1111
B-B-9
B-B-1616B-B-1515
4
Reference photo
First, assemble each component by following theworking method and markings. Then, refer to theillustration and photos below to glue the parts together.
Fuel TankSheet C, 2 parts in total
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Indication of Working Methods Fold or Curve Glue
3 Assembling the Fuel Tank & Exhaust Pipes
Exhaust PipesSheet D, 6 parts in total
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
D-D-1
C-C-1
C-C-2
D-D-5D-D-4
D-D-6
D-D-3
D-D-2
5
Reference photo
Reference photo
First, assemble each component by following theworking method and markings. Then, refer to theillustration and photos below to glue the parts together.
Rear FenderSheet E, 12 parts in total
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Indication of Working Methods Fold or Curve Glue
4 Assembling the Rear Fender
E-E-1
E-E-7
E-E-6
E-E-1212
E-E-5
E-E-4
E-E-3
E-E-9
E-E-1010
E-E-1111
E-E-2
E-E-8
6
Reference photo
First, assemble each component by following theworking method and markings. Then, refer to theillustration and photos below to glue the parts together.
Under CowlSheet F, 10 parts in total
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Indication of Working Methods Fold or Curve Glue
5 Assembling the Under Cowl
Reference photo
F-F-1
F-F-3
F-F-7 F-F-2
F-F-8
F-F-9
F-F-6
F-F-1010
F-F-5
F-F-4
7
First, assemble each component by following theworking method and markings. Then, refer to theillustration and photos below to glue the parts together.
FrameSheet G, 21 parts in total
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Indication of Working Methods Fold or Curve Glue
6 Assembling the Frame
G-G-1
G-G-1616
G-G-1818
G-G-1919
G-G-1717
G-G-2
G-G-1515
G-G-1313G-G-8G-G-6
G-G-1010
G-G-2020
G-G-1414
G-G-2121
G-G-4
G-G-7
G-G-3
G-G-1111
G-G-1212
G-G-5
G-G-9
8
Reference photo
7 Assembling the Rear Arm
*Do not glue Parts H-3 to H-4 at this stage.
First, assemble each component by following theworking method and markings. Then, refer to theillustration and photos below to glue the parts together.
Rear ArmSheet H, 13 parts in total
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Indication of Working Methods Fold or Curve Glue
H-H-1111
H-H-2
H-H-1313
H-H-1212
H-H-8
H-H-7
H-H-3
H-H-4
H-H-1010
H-H-9
H-H-1
H-H-6H-H-5
9
Reference photo
8 Assembling the Front Tire
I-I-2
I-I-1212
I-I-1414
I-I-5
I-I-1313
I-I-1111
I-I-4
I-I-1010
I-I-8
I-I-1
I-I-9
I-I-3
I-I-6
I-I-7
First, assemble each component by following theworking method and markings. Then, refer to theillustration and photos below to glue the parts together.
Front TireSheet I, 14 parts in total
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Indication of Working Methods Fold or Curve Glue
*Glue the completed front wheel to the assembled front tire.
Front wheel
Front Tire
10
Reference photo
9 Assembling the Rear Tire
J-J-1010
J-J-1212
J-J-3
J-J-1111
J-J-9
J-J-2
J-J-8
J-J-7
J-J-1
J-J-4
J-J-5
J-J-6
11
Reference photo
First, assemble each component by following theworking method and markings. Then, refer to theillustration and photos below to glue the parts together.
Rear TireSheet J, 12 parts in total
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Indication of Working Methods Fold or Curve Glue
*Glue the completed rear wheel to the assembled rear tire.
Rear Tire
Rear wheel
12
10 Finish
12
4
5
5
9
11
6
12
12
8
10
10 3
7
2345678910
11
12
1
Assembly Instructionsglue the assembled parts in numerical
order through .
Glue the Rear Tire to the Rear Arm.
Glue the Rear Arm to the Frame.
Glue H-3 to H-4.
Glue H-3 to the Frame.
Glue the Rear Fender to the Fuel Tank.
Glue the Fuel Tank to the Frame.
Glue the Under Cowl to the Front Cowl.
Glue the Under Cowl to the Frame.
Glue the upper part of the Steering to the Frame.
Glue the lower part of the Steering to the upper part of the Steering and the Frame.
Glue the Front Tire to the lower part of the Steering.
Finish by gluing the Exhaust to the Rear Arm and the Rear Fender.
H-3
Front Cowl
Lower Steering Column
Front Tire
Rear Fender
Exhaust Pipes
Fuel Tank
Under Cowl
Rear Arm
Rear Tire
Frame
H-4
Upper Steering Column
Please use the dots on each component as reference when gluing surfaces.
121
13
FRONTRIGHT
11 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.
B-B-1B-B-2B-B-3B-B-4B-B-5
B-B-6B-B-7B-B-8B-B-9B-B-1010
B-B-1111B-B-1212B-B-1313
B-B-1717B-B-1818
B-B-1414B-B-1515
B-B-1616
E-E-1E-E-2E-E-3E-E-4E-E-5
E-E-6E-E-7E-E-8E-E-9E-E-1010
E-E-1111E-E-1212
D-D-1D-D-2D-D-3D-D-4D-D-5
D-D-6
C-C-1C-C-2
A-A-1A-A-2A-A-3A-A-4A-A-5
Rear Fender Fuel Tank Front Cowl
Exhaust Pipes
I-I-1I-I-2I-I-3I-I-4I-I-5
I-I-6I-I-7I-I-8I-I-9I-I-1010
I-I-1111I-I-1212I-I-1313I-I-1414
Front TireSteering
14
12 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.
REARLEFTG-G-1G-G-2G-G-3G-G-4G-G-5
G-G-6G-G-7G-G-8G-G-9G-G-1010
G-G-1111G-G-1212G-G-1313G-G-1414G-G-1515
G-G-1616G-G-1717G-G-1818G-G-1919G-G-2020
G-G-2121Frame
J-J-1J-J-2J-J-3J-J-4J-J-5
J-J-6J-J-7J-J-8J-J-9J-J-1010
J-J-1111J-J-1212
Rear Tire
H-H-1H-H-2H-H-3H-H-4H-H-5
H-H-6H-H-7H-H-8H-H-9H-H-1010
H-H-1111H-H-1212H-H-1313
Rear Arm
F-F-1F-F-2F-F-3F-F-4F-F-5
F-F-6F-F-7F-F-8F-F-9F-F-1010
Under Cowl
Recommended